#Piwis 3 software

[dellsservicecenter]

From Engine to Electronics: Proper Diagnostic Techniques for Resolving Maserati Problems

Maserati, the epitome of Italian luxury and performance, is renowned for its stylish design and high-performance capabilities. However, like any high-end vehicle, Maserati can encounter a range of issues, from engine troubles to electronic malfunctions. Proper diagnostics is crucial in maintaining the health and performance of these sophisticated machines. This article will guide you through the common problems Maserati face and the proper diagnostic techniques to resolve them.

Common Maserati Problems

1. Engine Issues

Maserati engines are marvels of engineering, but they can develop problems over time. Common engine issues include:

    Misfires and Rough Idling: This can be caused by faulty spark plugs, ignition coils, or fuel injectors.

    Overheating: Often due to a malfunctioning cooling system, such as a failed water pump or a clogged radiator.

    Oil Leaks: These can originate from various seals and gaskets, leading to low oil levels and potential engine damage.

2. Transmission Problems

Maserati transmissions are designed for performance but can experience:

    Slipping Gears: This could indicate worn-out clutch plates or issues with the transmission fluid.

    Delayed Shifts: Often due to problems with the transmission control module or low fluid levels.

3. Electrical and Electronic Failures

Modern Maseratis are equipped with advanced electronics that can sometimes fail, including:

    Dashboard Warning Lights: These can indicate issues ranging from simple sensor failures to serious engine problems.

    Infotainment System Glitches: Problems with the touch screen, navigation, or audio system are not uncommon.

Diagnostic Techniques

1. OBD-II Scanner

The On-Board Diagnostics II (OBD-II) scanner is an essential tool for diagnosing Maserati problems. It can read error codes from the car's computer, providing insight into various issues.

    How to Use: Connect the OBD-II scanner to the port located under the dashboard. Turn on the ignition and follow the scanner’s instructions to retrieve the error codes.

    Interpreting Codes: Each code corresponds to a specific problem. For example, P0300 indicates a random/multiple cylinder misfire, while P0128 points to a coolant thermostat issue.

2. Visual Inspection

A thorough visual inspection can reveal obvious issues such as leaks, damaged components, or worn-out parts.

    Engine Bay: Check for oil leaks, loose connections, and the condition of belts and hoses.

    Undercarriage: Inspect for fluid leaks and damage to the exhaust system.

    Electrical Connections: Look for corroded or loose battery terminals and wiring issues.

3. Multimeter Testing

A multimeter is useful for diagnosing electrical issues in a Maserati.

    Battery Voltage: Measure the voltage across the battery terminals. A healthy battery should read around 12.6 volts when the car is off and around 14 volts when running.

    Sensor Checks: Test various sensors, such as the oxygen sensor or mass airflow sensor, to ensure they are functioning correctly.

4. Compression Test

A compression test helps diagnose internal engine problems such as worn piston rings or valves.

    Procedure: Remove the spark plugs and insert a compression gauge into each cylinder. Crank the engine and note the pressure readings. Low or uneven readings indicate internal engine issues.

5. Professional Diagnostic Tools

Maserati dealerships and specialized repair shops use advanced diagnostic tools that can access proprietary systems and provide more detailed information.

    SD2/SD3 Diagnostic Systems: These are specialized tools used by Maserati technicians to diagnose and program vehicle systems accurately.

    Diagnostic Software: Tools like Xentry or PIWIS can interface with Maserati's electronic systems for comprehensive diagnostics.

Addressing Common Issues

1. Engine Repairs

    Misfires and Rough Idling: Replace faulty spark plugs, ignition coils, or fuel injectors. Regular maintenance and using high-quality fuel can prevent these issues.

    Overheating: Ensure the cooling system is functioning correctly by checking the water pump, radiator, and thermostat. Flushing the coolant system periodically is also recommended.

    Oil Leaks: Identify the source of the leak and replace the necessary seals or gaskets. Regularly check oil levels and change the oil according to the manufacturer's recommendations.

2. Transmission Solutions

    Slipping Gears: Inspect and replace worn clutch plates and ensure the transmission fluid is at the correct level. Consider a fluid change if necessary.

    Delayed Shifts: Diagnose and repair issues with the transmission control module or solenoids. Regular transmission servicing can prevent many of these problems.

3. Electrical Fixes

    Dashboard Warning Lights: Use an OBD-II scanner to identify and address the underlying issue. Reset the warning lights after repairs are completed.

    Infotainment System Glitches: Perform software updates and check for any loose connections or faulty components. In some cases, a complete system reset may be required.

Conclusion

Proper diagnostics are essential for maintaining the performance and reliability of your Maserati. By using the right tools and techniques, you can identify and resolve issues promptly, ensuring your luxury car continues to deliver the driving experience it was designed for. Regular maintenance and timely repairs are key to keeping your Maserati in top condition, from the engine to the sophisticated electronics.

[xhorseshop]

VNCI J2534 Nano and other J2534 devices, how to choose?

There are many J2534 devices in the market, and VNCI J2534 Nano is one of them, offering a more budget-friendly price. Therefore, is it the first choice for price-conscious buyers?

Customers should make the choice based on two aspects:

a) It only supports J2534.

b) It not only supports J2534 but also has the capability to emulate OEM VCIs.

So, let's check which J2534 device is right for you among the VNCI J2534 Nano, AUTEL MaxiFlash VCI, and VXDIAG VCX SE.

VNCI J2534 Nano

It only supports J2534, compatible with J2534 Passthru and ELM327 for J1979 diagnostics.

VNCI J2534 Nano supports the following protocol configurations:

ISO15765 (Standard/Extended frame).

ISO9141.

ISO14230.

J1850 PWM (Supports IFR and 2X speed mode).

J1850 VPW (Supports 4X speed mode).

Programming voltage.

Short to ground.

ELM327 with command set version 1.3a.

VNCI J2534 Nano function list

AUTEL MaxiFlash VCI

MaxiFlash VCI only supports J2534. It also supports CAN FD, has 4 CAN channels, D-PDU, IS 022900-1 (j2534-1), and ISO 22900-2 (j2534-2) protocols. Additionally, it is RP1210 compliant and can be utilized with a Windows computer when paired with required OE subscription for vehicle module programming.

Autel J2534 is compatible with a wide range of OEM software.

3. VXDIAG VCX SE 

In addition to supporting J2534, it has the capability to emulate OEM VCIs.

VXDIAG VCI is capable of emulating the following software:

Toyota Techstream

Honda HDS

Benz Xentry

BMW ISTA

Subaru SSM3/SSM4

JLR SDD Pathfinder

Porsche PIWIS II/PIWIS III

Ford/Mazda IDS

Renault Clip

Volvo VIDA

GM GDS2/Tech2win

VAG ODIS

Furthermore, VXDIAG VCX SE can also serve as a J2534 passthrough device for Hyundai/Kia J2534. It is compatible with various software applications such as Techstream official, FDRS, FJDS, Techline Connect SPS2, pcmflash, bitbox, alexflasher, gromcalc, and many others.

In summary, please consider your needs when choosing between VNCI J2534 Nano, AUTEL MaxiFlash VCI, and VXDIAG VCX SE. VNCI J2534 Nano offers budget-friendly J2534 support, while AUTEL MaxiFlash VCI exclusively supports J2534 with additional features. The VXDIAG VCX SE supports J2534 and emulates OEM VCIs for compatibility with various software. You can choose based on your specific requirements.

[loadbeach931]

Kts 520 Bosch

Kts 520 Bosch Parts

Bosch Kts 520 Bedienungsanleitung

Kts 520 Bosch Parts

Interfaz BOSCH KTS 520 funcionando. International shipping and import charges paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab International shipping paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping is paid. Seller: ntradingltd2090 (74) 96.7%, Location: London, Ships to: Worldwide, Item: 31 SELL THE SHOWN 2x SPECIAL CABLES 1. Cable compatible with Piwis - this allows Bosch KTS-520 Multiplexer. KTS 650, KTS 670, KTS 520 and KTS 550 discontinued testers can be updated with the latest available software version and used for life. Annual Subscription Software Only £495.00 + VAT. Test equipment from Bosch: KTS 515, KTS 520/550, KTS 530/540/570, KTS 340 and KTS 670. One for all: Repair solution for passenger cars, vans and trucks ESItronic 2.0 – suitable for every workshop Repairs on passenger cars, vans or trucks – ESItronic 2.0 ensures perfect compatibility. The modular structure.

Nokia 111 RM-811 Latest Flash Files Free Direct Download Only 3 File Mcu+PPM+CNT Just Click On File For Direct Download Version: 03.47. Latest version Download Flash File Download. By pardeep singh - 2:20 AM. Email This BlogThis! Share to Twitter Share to Facebook Share to Pinterest. Nokia 111 flash file.

Porsche KTS 520

Kts 520 Bosch Parts

Software version:V29 Notice: Two kinds of HDD for option: T30 HDD or Dell D630 HDD. T30 HDD only fits IBM T30 Laptop. Dell D630 HDD only fits Dell D630 HDD. When you place order, please remember to leave messages to indicate which kind of HDD you want. PIWIS is the latest inspect equipment of Prosche Company. It could read code, clear code for all type of Prosche. It also could test, program & guard against theft according to its data flow. It could lead to malfunction self-inspect and full car circuit diagram for the car which was made after 2005. It also has the function of measuring leads for multimeter. It's the necessary equipment for Prosche professional inspector Features: 1, Simple adaptation to laptop or PC IBM T30 or Dell630 through USB or serial standard interface 2, Powered by ESI(tronic): ideal in combination with the workshop software for fast and targeted vehicle diagnosis in the workshop. 3, Full range of ESI(tronic) test specification immediately available. 4, Both models are equipped for all current diagnosis protocols: - ISO systems of European vehicles - SAE systems for American and Japanese vehicles - CAN protocols for testing state-of-the-art CAB bus systems in new vehicles 5. Direct multiplexer connection via OBD line to the diagnosis socket; 6. Software automatically controls multiplexer - thus dispensing with need for troublesome changing around of communication connections. Package including: * Geniune KTS520 with 12months waranty from BOSCH * OBD2 BOSCH cable * USB cable * IBM T30 HDD or Dell630 HDD with software PIWIS ready to work

Bosch Kts 520 Bedienungsanleitung

AFTER SERVICE: 1. Guarantee: one year, from the date that equipment arrived 2. Upgrade software free for one year; original factory offer service 3. Aion online download full client. Update method: HDD or CD 4. Freight collect 5. Maintenance freight was paid by seller KTS520 select Language

80GB Hard disk compatible with KTS520

Kts 520 Bosch Parts

KTS520 diagnostic show

[saraobd2]

Piwis 2 vs 3 Difference and what is Piwis Tester3?

Porsche Piwis Tester 3 is a modern dealer auto scanner that is used in workshops for complete diagnostics and repair of the entire Porsche car range. Using a scanner in a car workshop allows you to identify a malfunction and its cause, program the electronic components of the car and perform several other tasks that will require repair or service.

What we can do using the tester? With the help of computer diagnostics of a car, you can get information about the state of all its electronic systems. The principle comprises reading error codes from all units and mechanisms inside the car and their further elimination. The analysis of the car condition takes a minimum of your time, but you will noticeably save on further repairs of more serious car malfunctions. Using Piwis 3 Porsche in the workshop professionals will be able to quickly: 1.Read and clear DTCs; 2.Set, change electronic keys; 3.Program the immobilizer; 4.Record and then reproduce on any device technical parameters and freeze frames from the electronic control unit and any vehicle sensors; 5.Carry out diagnostics of executive blocks, assemblies, parts; 6.Process PCM data stream; 7.Read information from the log; 8.Make ECU coding and programming and so on.

Car diagnostics using Piwis 3 software A service that contains Porsche Piwis Tester will identify complex breakdowns and there is no need to do major disassembly of the car. Also, the scanner can diagnose and program the following components and systems of the entire range of the Porsche concern: * engine diagnostics; * diagnostics, repair, and replacement of climate control systems; * repair and diagnostics of the anti-theft system installed in the Porsche concern; * diagnostics of safety systems (airbags, traction control, and anti-lock braking systems) and much more. This is how quickly qualified experts will do the diagnostics of all the problems of car systems using Piwis 3. Incorrect settings will lead to the failure of the entire vehicle system, and further repairs will become even more expensive. The piwis 3 diagnostic tester is a new generation device. Piwis tester 3 supports all models in the Porsche range and conducts different operating modes. The tester will allow you to work and diagnose with such systems as air conditioning, automatic transmission, engine, MPL, SRS, ASR, ABS, GM, KEYLESS-GO, standard alarm, and others. We use this application to run Porsche vehicle diagnostics for all new and old models.. The diagnostic tool can significantly reduce the vehicle breakdown time, as the piwis 3 software has the developer Porsche piwis mode integrated. The device implements full diagnostics and testing of all electronic systems. The owner of the scanner will identify a car malfunction and its cause, program the electronic components of the car and perform several other tasks that will require repair or service. Use the piwis tester 3 manual to make it easy to work with the device.

Piwis 2 vs 3: how it differs from the previous one Unlike the previous modification of the Porsche Piwis 2, the modernized device updates the applicability of the auto scanner by updating the software and fault codes, and: * increased productivity; * modern user interface; * reset service intervals; * online programming; * demonstration of current data; * display of freeze frames of malfunctions with parameters at the time of the error; * carrying out a set of works on service maintenance of Porsche cars; * activation, deactivation of components; * the ability to browse technical documents online; * greater work efficiency; * integrated troubleshooting system; * base for electrical circuits; * license auto-renewal.

Includes the following piwis 3 developer modes: * control and comparison of operating parameters; * programming of control units; * car diagnostics; * service functions and technical checks.

Piwis 3 software The Porsche piwis 3 software program is multilingual. The colorful updated piwis 3 interface contains a full-fledged database for the Porsche cars repair. It supports the latest models: Panamera, Cayenne, Targa, Porsche 911 Carrera, Porsche Macan, Porsche 918 Spyder, Turbo, and more. The software  version is v40.000.00 with the most complete engineering mode.

https://blog.obd2.ltd/piwis-2-vs-3-difference-and-what-is-piwis-tester3/

[obdiishop]

High Quality Porsche Piwis3

The Porsche PIWIS 3 (PST3) is the newest Diagnostic Tool in the market. It can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Specially if  were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function. It is the absolutely necessarily tool for the job.

https://www.obdii.shop/goods-155-High-Quality-Porsche-Piwis3-PT3G-VCI-Plus-Lenovo-Yoga-S1-I5-8G-5300U-Laptop.html

1.Piwis 3 With V40.400 Piwis III Software for Porsch Cars diagnostic & Programming. 2.Piwis 3 with developer mode software & TeamViewer Installed Lenovo Laptop Ready To Use, cover all piwis 2 functions. 3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 2002.

[myemilyzhang]

Piwis Tester 2 Work For Porsche Cayenne 2014 Kessy Module Matched

How Does Piwis tester 2 Matching Porsche Cayenne 2014 Kessy Module

Piwis Tester 2 is Piwis Scan Tool for Porsche Scanner, Piwis Tester 2 with latest V18.150.500 software work for Porsche. Piwis 2 Porsche Scanner work for Porsche old and new car model before 2017. Below Obd2tool.com share how does Piwis tester 2 work for Porsche Cayenne 2014 Kessy Module matching.

Piwis 2 with V18.150.500 Piwis 2 Software for Porsche Scan Tool

Piwis tester 2 with V18.150.500 Piwis 2 Software for Porsche Scan Tool

 How does Obd2tool.com offer IMMO code calculate for Kessy Module Matched?

1. Firstly, contact us to pay for Kessy module IMMO code calculate service,

Then pls send Obd2tool.com sales order number with Porsche car nameplate to show the Car model, year & VIN numbers.

2. Secondly, connect the Piwis tester 2 interface & Porsche diagnostic laptop to the car, as well as insert power adapter to the car

3. Then, send us Teamviewer id and password of Piwis Tester 2 laptop, and waiting beside the car

4. Need your help to brakes on, headlight on, emergency flashing, turn on & off width lamp to keep the car activate all the time when technician start offline matched Kessy Code.

(Once the Car is sleep during technician do the Kessy module matching, we have to restart processing.)

5. Obd2tool.com technician will help you matched the kessy module.

Obd2tool.com Kindly Note:

1. Kessy had better brand new order via VIN number from the dealer

2. If we need matching the Second-hand Kessy Module via Piwis tester 2, pls offer VIN number to calculated the IMMO code firstly.

Customer need purchase the Piwis 2 Porsche Diagnostic Software V18.150.500 Porsche Piwis II Porsche Scanners or Piwis 2 online programming after change new module just contact us freely.

[qingqin]

VXDIAG Porsche PIWIS Tester III Software Update to V38.900

Latest version Porsche Piwis III V38.900 is verified working with VXDIAG Porsche Tester III.  The Piwis 3 works rather well compared to the Piwis 2.

Version: V38.900.000, Nov. 2019

Porsche Piwis V389

Language: English, US English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese

Operating system: Lenovo T440P Laptop Windows 7

Update method: by sending back the 240G SSD or purchasing a new SSD

What’s new in PIWIS III 38.900?

38.900 with for the experts the developer/engineering mode activated to code without passing through the Porsche server.

Older software version 38.400 with unlimited activation, with a full engineering menu.  You can install a fresh version, 38.900 (the engineering menu has been cut down). Equipment tested, ready to go.

How to Connect Porsche Tester III with Vehicle and PC?

[luseyzhang-blog]

US$848 - Piwis Tester II V18.100 Porsche Diagnsotic Tool with CF30 Laptop for Porsche Scanner 1. Software Version: V18.100 2. Laptop: CF-30 (Second Hand)---Software is inside the Hard Drive. No need Installation 3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch 4. Update Method: By CD or HDD (One Year for Free, It can not be updated online. Send back the hard disk to us update or buy one new hard disk with latest software .) Software contains operating system win XP only. you just need to insert into your computer and use it. 5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY) 6. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them. 7. Support Key Programming function,cost 210USD per time ( you need consult our customer sevice first with the type and year of your car)

[autovci-blog]

After-sales service: Free Technical Support If you have any problem, please do not hesitate to contact us. Email   ：autovci@outlook.com Skype ：autovci lineid ：autovci WhatsApp (+86)17725791527 2018 New Porsche Tester III Diagnostic Tool For Piwis 3 V37.25 PT3G

After-sales service: Free Technical Support If you have any problem, please do not hesitate to contact us. Email   ：autovci@outlook.com Skype ：autovci lineid ：autovci WhatsApp (+86)17725791527

[myemilyzhang]

How to Check Porsche Engine Oil Level by PIWIS Tester

Checking the Porsche engine oil level makes more accurate than the normal procedure with the instrument cluster screen and on top of that, it tells you how much oil you have to top to be at max level. This will be used every time we change our oil.

Here is the procedure: WM 170101 CHECKING ENGINE-OIL LEVEL USING THE PIWIS TESTER (CAYENNE, CAYENNE GTS, CAYENNE S HYBRID, CAYENNE S E, CAYENNE TURBO, CAYENNE (3.0)) > CHECKING ENGINE-OIL LEVEL

Information The Piwis Tester II instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations may occur with later software versions. 1. PIWIS Tester II must be connected and ignition switched on. 2. Start the diagnostic program and select the required vehicle. 3. Select the DME control unit in the control unit overview. Press [F12] to continue. 4. Select the Maintenance/repairs menu. Press [F12] to continue. 5. Select the Oil filling function. Press [F12] to continue. 6. Start the engine and let it run until an engine oil temperature of 90° C is reached.Rev the engine if necessary to heat the engine oil to the specified temperature. 7.The oil level measurement process starts automatically as soon as the engine oil temperature of 90° C is reached. 8. Switch off engine. 9. Add the quantity of oil displayed on the PIWIS Tester 2. 10. Disconnect the PIWIS Tester.

With the Launch X431 V+ it is located in the “Oil filling” special function menu of the DME and here is how it works: Test on going:

Result (0.9 liter to add):

[youobd88]

Porsche PIWIS 3 V37.900 Free Download

Free download original Porsche PIWIS 3 V37.900 SD card:

https://mega.nz/#!o1E1DYZC!tQ47l88FfvleQU-28CucaEsCvgtureM8FbFKRR_dXd0

– support for any version upgrade to V37.900 – you have to use imageusb to write it to the usb,the format from is not important

important: it’s your own risk to try piwis iii v37.900. for sake of security, you’d better have a tested version, here: piwis v37.250.020 works perfectly with vxdiag for porsche piwis iii

something to know about piwis 3: from version 37900 the wiring diagram works on-line with ppn account. after updat, you lost developer mode my version developer mode ok unlimited license 9999days wiring diagram ok works perfect

i’d like to show you the guide:

have you control the drive E the piwis decompresses the sdcard in E The sdcard this decompresses in this drive after a failure to update the bitlocker protection is automatically removed revive the piwis, after a bad update miss regedit hkey_local_machine software PIWIS install IC_STATUS type 0X0000 now you have access to your piwis, as before

you need the bitlocker key of the sdcard it’s the same for all sdcard and all versions 088990-425458-311531-582483-281380-229350-162602-208164 copy and past ctrl + v bitlocker is remove you have 2 files change the ending .prs by .rar now you are decompressing with winrar you have access to the update decrypt Manually install the update you have to manually change the version in regedit softwar PIWIS basis replace 37.250.030 with 37.900.000 control in piwis system version information general and diagnostics that all is changing automatically to be sure or regedit sotware piwis PTTD INSIDE 8 FOLDER CONTENT_VERSION he must not have 37.200 you lose the developer mode now a little brain you go find the rest as I did all that finds new !!!!! help the porschist 37.900 does not have much difference with 38.050.030 just added 992 and 982 ecu available instrument cluster after success 37.900.000 for infos piwis shell is 1.190.18136 PDU-API is 3.3.3 diagnostic functions 9×1-37.90.00P ……..

think also that the new model 2019 are guaranteed by porsche you will not see them before 2 years in your garage

when the update 38.100 or 38.200 or 38.300 or 38.400 and available in sdcard I’m talking about updating FULL, not delta I post it for free in the forum no need to pay it will be free to help our porschist friend

JUST MY VERSION 37.250.030 COMPLETED ALL BUT WORKING ON PORSCHE 997 991 981 718 MACAN CAYENNE PANAMERA GT4 GT3 … WITHOUT STRESS OR DIFFICULT IT WORKS MORE THAN WELL IN OFF-LINE MODE

As I explain the 2019 models are guaranteed 3 years by Porsche and often buy leasing we are not about to see them arrive before 2022 in our garage maybe this date will be piwis tester 4

message from PORSCHE Who can today offer you a Macan or a Cayenne with 3 years warranty with unlimited mileage? Porsche Service Centers only.

Thus, in the official Porsche network, reason rhymes with passion: 3 years of Porsche Approved warranty on all used Porsche SUVs eligible for the Porsche Approved label and financed (1) over 36 months.

To live your dream in all serenity, take advantage of this offer (2) until June 30, 2019.

[youobd88]

How Does For Porsche Piwis III Software Update Piwis 3 FAQ

Latest generation Porsche Piwis3 with V38.400.030 Software support Porsche Car till 2018. We sell the Porsche Piwis 3 with Panasonic CF-54 full system installed V38.400.030 Piwis 3 software installed full system ready to use. Most client inquiry the Piwis 3 detail for Porsche Diagnostic & Programming, Below Obd2tool.com share Porsche Piwis 3 with V38.400.030 Piwis 3 software For Porsche Piwis III FAQ.

Q: Can V38.400.030 Software for Porsche Piwis III perform all the functions of Porsche Piwis II?

A: Yes, Piwis III is compatible Porsche Piwis II, for Porsche that means Porsche Piwis Tester III includes all the functions of Piwis II.

Q: How to update V38.400.030 Piwis tester III Software Future?

A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually, the software updates 1-2 times per year.

Q: Can Piwis Tester II update to Porsche Piwis Tester III V38.400.030?

A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: Can I use my personal computer?

A: No, the computer and the device is bound together. Because The Piwis III V38.400.030 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will have no nonsense.

Q: Why need Piwis III V38.400.030?

A: Because Piwis II can’t work with the Porsche after the 2017 year. Only Piwis III V38.400.030 can.

Q: Piwis Tester III programs IMMO & Key online?

A: Yes. It Support.

Q: Does Piwis Tester III support Wifi?

A: Usually, the device is offline version and WIFI is disabled so that you don’t need to activate every 15 days.

Q: Can Piwis Tester III connect to the internet?

A: Yes. It is allowed.

More detail about Piwis III For Porsche Piwis Tester 3 Scanner PST3 Interface with Panasonic CF-30 laptop full set just contact us freely.

[youobd88]

VXDIAG VCX DoIP Porsche Tester III vs. OEM Porsche PIWIS III

What’s the difference between VXDIAG VCX DoIP Porsche Tester III and OEM Porsche PIWIS III Tester? Check table comparison below:

Item VXDIAG VCX-DoIP for Porsche OEM Porsche Tester III PT3G Item No. VX16 VX16-B Image

Original/Clone Original VXDIAG Clone Software version 38.300.030 38.200.040 Language German English French Italian

Spanish Japanese Chinese Russian Dutch Portuguese

German English French Italian

Spanish Japanese Chinese Russian Dutch Portuguese

PIWIS License Unlimited Unlimited Update By new SSD By new SSD DoIP enabled Yes Yes Support Porsche year All Porsche from 1998 till now All Porsche from 2002 till now Online immobilizer programming Yes Yes Full-system diagnosis Yes Yes Guided fault finding Yes Yes Maintenance circuit diagram view Yes Yes Developer Mode Yes Yes Original software compatibility No No WiFi connection USB/WiFi/WLAN USB/WiFi Package 1pc x Piwis tester III VCI

1pc x USB Cable

1pc x OBD Cable

1pc x Lenovo T440P Laptop

1pc x LAN cable

1pc x 240G SSD

1× Piwis3 Tester

1× OBDII Cable

1× USB Cable

1× 240GB Software SSD

1× Panasonic CFAX3 Laptop

  Other software license SDD, GDS2, Techstream, HDS, XENTRY, ISTA,IDS,VIDA etc No possible to add other license Price $1845 $2599

What’s the difference between Piwis 2 and Piwis 3:

PIWIS Tester III covers all new Porsche models like new Panamera 971, Cayenne 9Y0, Cayman 981 GT4 clubsport, etc., which are not supported by PIWIS II at all and will never be supported in the future. PIWIS Tester III also supports full range of diagnostics functions for all the Porsche models which have ever been released.

Why you should have a Porsche Piwis 3:

* vehicle coverage up to 2018: 911, Macan, Cayeme, Panamera, Boxter Cayman * Fast and stable connection Simulation mode ( diagnostic session without VCI connection ) * Support online immobilizer programming * New DoIP diagnostic technique based on Ethereum for post-2017 Porsche * Developer mode enabled

Which Porsche model and year can be done with Piwis 3:

Piwis 3 is confirmed to work with all Porsche from 1998-2018: Porsche 911(997) (991) Boxster/Cayman (987) Cayenne up to MY 2010 Cayenne from MY 2011 Panamera

Especially the latest models: Paramera (971) 2018 Caynenne (92A) 2018 Macan (95B) 2018 911 (991) 2018 and othe1 old models

https://www.obd2tool.com/blog/2020/03/07/vxdiag-vcx-doip-porsche-tester-iii-vs-oem-porsche-piwis-iii/

[youobd88]

Choosing the best OBD-II scanner for Porsche vehicles

In this article, we take a look and review some of the best OBD2 scanners for Porsche. With hundreds of OBD-II scanners on the market, it is overwhelming for many Porsche owners to figure out what is the best OBD2 scanner for Porsche.

While you can diagnose Porsche check engine light with a standard obd2 scanner, you can not diagnose airbag, transmission, and other systems without a scanner that can read Porsche specific fault codes.

Scanners we review here range from $140 up to $700 and can diagnose multiple Porsche systems including Engine, Anti-lock Brake System, transmission, airbag and more.

1. Autel MaxiDAS Professional Scanner

Who is this scanner for?

The Autel MaxiDAS is a professional level diagnostic scanner for Porsche and other makes. While it is the most expensive scanner on this list, it is also the cheapest scanner that you can get that will offer similar functionality to a dealer level scanner. What do we like?

The Autel MaxiDAS can not only access all Porsche systems and modules, but it can also carry out sensor activations, programming and display live sensor data from all the modules.

Another advantage of the Autel MaxiDAS is that it covers almost all makes and makes and is not just for diagnostic Porsche vehicles.

What don’t we like?

This scanner is a bit expensive for Porsche owners who may only use it a couple of times.

If money is not a concern this is without a doubt the best Porsche scanner for the money.

2. Porsche PIWIS

Whos is this scanner for?

PIWIS is a diagnostic scanner for Porsche dealers and mechanics.

Porsche PIWIS is the most powerful diagnostic tool for Porsche vehicles. It is used at Porsche dealerships for diagnosis, troubleshooting, and programming.

It allows you to:

* read/clear error codes, * view live data stream, * any module programming, * perform any component testing, * view maintenance information, * display wiring diagram, * much more.

What do we like?

Porsche Piwis Tester II can help you diagnose and program anything on a Porsche. It works on new and old Porsche vehicles.

New Panamera vehicles can be diagnosed with Porsche Piwis Tester II. What don’t we like?

PIWIS scanner is too expensive and difficult to use. You most likely won’t be able to get a hold of Porsche Piwis unless you are an auto repair shop.

Porsche Piwis 3 Advantages:

* New DoIP Ethernet diagnostic technology, support for models with DoIP diagnostics after 2017. * Multi Languages available for diagnosis: English, US English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese * Software version: V38.400.000 * New operating system and more intuitive software interface * Maintenance, repair, control unit replacement, programming code. * Login online anti-theft matching programming. * Guided fault finding. * Maintenance circuit diagram view. * Engineer mode (development version) can support special functions such as installing, modify, Flash. * Process malfunction navigation, showing all interior circuit diagram. Specially if Porsche were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function.

Piwis 3 diagnostic functions:

Read trouble code Clear trouble code Show ECU information Test live data Display actual values

New Car Models Available :

Panamera (971) 2018 Cayenne (92A) 2018 Macan (95B) 2018 991 (991) 2018 Also support All Other Old car models

Conclusion:

If you are Porsche owner looking for a dealer level scanner you will get similar functionality with Autel MaxiDAS.

MaxiDAS provides the in-depth diagnostics and also works on 20+ vehicle makes including Europen, Asian and Domestic vehicles.

The PIWIS 2 in this list work on most 1996 and newer Porsches such as Porsche 996, 997, 911, Boxter, Cayenne, 993.

Before you purchase a Porsche OBD2 scanner, you should always check system coverage for your particular Porsche model and year.

https://www.obd2tool.com/blog/2020/03/09/choosing-the-best-obd-ii-scanner-for-porsche-vehicles/

[qingqin]

HOW DOES FOR PORSCHE PIWIS III SOFTWARE UPDATE PIWIS 3 FAQ

Latest generation Piwis tester 3 with V38.400.030 Software support Porsche Car till 2018. We sell the Piwis Tester 3 with Panasonic CF-54 full system installed V38.400.030 Piwis 3 software installed full system ready to use. Most client inquiry the Piwis 3 detail for Porsche Diagnostic & Programming, Below Autonumen.com share Piwis Tester 3 with V38.400.030 Piwis 3 software For Porsche Piwis III FAQ.

Q: Can V38.400.030 Software for Porsche Scan Tool Piwis III perform all the functions of Porsche Piwis II?

A: Yes, Piwis III is compatible Porsche Piwis II, for Porsche that means Porsche Piwis Tester III includes all the functions of Piwis II.

Q: How to update V38.400.030 Porsche Piwis III Software Future?

A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually, the software updates 1-2 times per year.

Q: Can Piwis Tester II update to Porsche Piwis Tester III V38.400.030?

A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: Can I use my personal computer?

A: No, the computer and the device is bound together. Because The Piwis III V38.400.030 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will have no nonsense.

Q: Why need Piwis III V38.400.030?

A: Because PIWIS II can’t work with the Porsche after the 2017 year. Only Piwis III V38.400.030 can.

Q: Piwis Tester III programs IMMO & Key online?

A: Yes. It Support.

Q: Does Piwis Tester III support Wifi?

A: Usually, the device is offline version and WIFI is disabled so that you don’t need to activate every 15 days.

Q: Can Piwis Tester III connect to the internet?

A: Yes. It is allowed.

More detail about Piwis III For Porsche Piwis Tester 3 Scanner PST3 Interface with Panasonic CF-30 laptop full set just contact us freely.

[luseyzhang-blog]

US$848 - Piwis Tester II V18.100 Porsche Diagnsotic Tool with CF30 Laptop for Porsche Scanner 1. Software Version: V18.100 2. Laptop: CF-30 (Second Hand)---Software is inside the Hard Drive. No need Installation 3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch 4. Update Method: By CD or HDD (One Year for Free, It can not be updated online. Send back the hard disk to us update or buy one new hard disk with latest software .) Software contains operating system win XP only. you just need to insert into your computer and use it. 5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY) 6. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them. 7. Support Key Programming function,cost 210USD per time ( you need consult our customer sevice first with the type and year of your car)