#alloffer

[ricojrcrea]

Marvel super héros

[freexboxgiftcard]

[gayspock]

he's going off on it again 🤪👈

its really fucking embarrassing it really fucking is when the littlest shit sends me off the fucking rails i tried to fucking pull myself together i feel like shit again i want to blow my fucking brains up please please please just fucking get it together get up i try to get up i try to go out its stupid it takes so fucking much go to the gym its the only fucking thing that can nearly fucking level you out just please fuckingdo it just this fucking once you idiot then i fucking get there theres no machines you cant even do it today and its a normal fucking thing just fucking cope with it handle it anybody else could the fucking cogs in my head turning realising im not going to be able to go again until thursday, but no now thats twice a week, its alloff again its all fucking off againa nd my brains shutting the fuck down for no fucking reason other thantrying to rearrangeeverything in my head is making meblow up and need to fucking collapse in on myselfand then the self-eating snake spiral of you are making this worse you cannot cope with anyhting you will never cope with anythingi keep thiniking about how nothing else manages it how this doesnt even manage it notreally im doing this im deluding myfuckingself i fucking hate it actually i fucking hate fucking everything and i think i need to make myself throw up instead something something to Level This Out i certainly need to fucking punch myself in thehead this time wo its even you cant get into that my point is its not just about that i dont know i feel so fucking embarrassed who am i justifying it to its just its not just about that i feellike its so fucking stupid imaginable dogshit ever that makes me crumble it takes so much just to do the most basic fucking shite imaginable and when i try i really fucking try nobody believes me and wheni do manage to fuckingmanage the bare fucking minimum it never even fucking matters and i feel like im just fucking shovelling dogshit into a fucking hole a nd i feel like im going to claw my dfucking skin off theonly thing there is is fucking endless fucking sentiments of cope cope just fucking keep doing it youre not doing it enough you dont fucking TRY enough you dont suffer enough you dont endure enough you dont know anything im a fucking child i dont care its alwyas worse its always worse before it getsbetter. i dont know i think about how its never been anythingbut worse how it gets worse i keep trying my hardest it never means anything it never matters i wish it fucking mattered how its not fucking worth it i wish it fucking wqorked out just once please please please i feel like i just keep trying i spent yearsfcking trying and trying and it never means anything and the endless fucking chorus of "oh it shouldnt matter!" well i dontknowwhat to fucking tell the world im a vapid bitch i m a fucking pussy im a fucking pathetic personi cant fucking cope with it i cant fucking cope with it neverending no fucking people tobe with no fucking end in sight nothing to be good at nothing to be proud of jsut endless fucking noise to fucking keep running at with no . fucking . meaning . and not justin sight but no way of it ever happening other than some fucking

voicelesspeoplewho justwant you to shut up and think youre fucking stupid tellingyou youre not doing it right . something something i cant make it to the end of that and i dont think its fucking worth it how many times do i say andeven when i do and thats it thats the fucking problem its sofucking pathetici just want it tofucking help just this fucking once fr something please please god fuucking make a difference ifeel like everything just makes me fucking miserable everything makes me fucking sad i keeptrying to fucking be normal but i donthave the energy to try and ufcking swallow the fucking horsehsit right now i dont have the energy for anyhting i keep trying to put it in what did isayit doesnt matter it just breaks down im not enough to get from point a to point b i cant fucking manage anything howma i ever meant to fucking pickmyself up i dont fucking think i wever will i think about how i'lldieand i get so so fucking angry thinking about hwo im still going to be a fucking joke if people remember me at all how im the stupid fucking btich who dug their own grave i feel so embarrassed abouit people who dont fucking care but in my fuckinghead i cant get the sentiment out ofdesperately wanting to prove that im not please please just i want to feel like a real fucking respectable fucking person i want to kill you i realise im never going to im so but i cant fucking manage anything i cant fucking find anything that helps it ikeep just shovelling dog shit down my own fucking throat iis anyone going nuts i think im going nuts

[becoming-not-became]

FinalSale

When you need someone you’ll take anyone when you want someone well then that’s different wanting affords perspective you might look for something that fits or maybe something that doesn’t but you know you always know who won’t work and who might which is different from a one size fits alloff of the sales final rack

[amyknash]

Slowly,

Psst, I have a secret.Is this a symptom?Hearing my own voicecalling out loudin an empty field.The sun shines brilliantly—spilling all over the prairie,finally fully covered in snow.I know you couldn’t waitfor me. I needed to findmy own bottom. Could notborrow yours. My diagnosismine to make. Spared. Then not.A week ofmy life erased.I tried to wipe them alloff the calendarback then. Now,I say all…

[babyawacs]

.@radioshack @radioshack @cnet @techpowerup @wired @wireduk @pcwelt @tomshardware @debian #frustrating_moments_in_i_t iwonder bypassing mainrail directly to draimof mainmmosfets orevento main coil or coilmosfets ? the drivers check itwouldstillnot boot? the superio initialcheckupneeds powergood yes? itisnot complicated itis powergood yesorno no: break powersupply to components? but 3.27 voltmainrail thatis a mosfet or and the driver ofthemosfet i fried the driver chip with misaligned and now replace fried powersupplychips iemosfet drivers? itfried smalmosfet and big cpu mosfet luckily alloff but the acp chipmaybe fcucket yes?

.@radioshack @radioshack @cnet @techpowerup @wired @wireduk @pcwelt @tomshardware @debian #frustrating_moments_in_i_t iwonder bypassing mainrail directly to draimof mainmmosfets orevento main coil or coilmosfets ? the drivers check itwouldstillnot boot? the superio initialcheckupneeds powergood yes? itisnot complicated itis powergood yesorno no: break powersupply to components? but 3.27…

[burstmethod]

ALL OFF | Otakon @otakonpics #alloff #jrock #live #livemusic #livemusicphotography #livemusicphoto #livemusicphotographer #concert #concertphotography #concertphotographer #band #music #musicphotographer #musicphotography #concertlife #bandphotographer #bandphotos #bandphotography #musicphotos #concertphotos #lowlightphotography #lowlightphotos #lowlightlife https://www.instagram.com/p/B2_-ddxh2vD/?igshid=alduh24qhael

[ellenhenryart]

☆20% off sitewide with code ALLOFF☆⠀ Photos from nature, animals from the rainbow. For your walls, home and body. See my full Redbubble range ⠀ ⠀ https://buff.ly/2U0aH73⠀ ⠀ #ellenhenry #ellenhenryart #redbubble #redbubbleartist #homedecor #cushions #giftideas #throwpillows #homesweethome #apparel #coffeecups #specialoffer #ALLOFF (at Wimbledon, United Kingdom) https://www.instagram.com/p/BzqxuwKn_s4/?igshid=1gghk6661j2gk

[carlosrexxxx]

Sapnning. I’m hard now. Door license incoming 💪🏼💪🏼 #lockdowntrims #thathmphaircut #grade05 #alloff 👩🏼‍🦲 https://www.instagram.com/p/B_ncnjhnPaC/?igshid=1q5ocvnnvvtey

[elkedageenfotovanluus]

hallo nieuw haar

[hobe89]

#台中 #浮現祭 #emergefestival #20190427 #alloff #jp #臺灣🇹🇼 #音樂祭 #音樂 #獨立音樂 #台湾 #音楽 #ライブ #フェスティバル #バンド #taiwan #taichung #music #live #festival（在 台中洲際棒捄埸 Taichung Intercontinental Baseball Stadium） https://www.instagram.com/p/Bw2_9HOAJxm/?utm_source=ig_tumblr_share&igshid=lv2n5kt8pfec

[halberdierminister]

Hey gang, right now for a few hours, everything on my redbubble is 20% off!

Use the coupon code ALLOFF at checkout to save 20%

[Persona Collection]

[Pride Collection]

[Magic The Gathering Collection]

[Bi Squad]

[Beholder]

[Sedition]

[Fight the Power]

[Eeveelution Jerseys]

[harpersbizarresketchbook]

It’s Ineffable!

Prints available now! Also, there is 20% off if you use the code ALLOFF at the checkout!

[dee-the-red-witch]

It's Monday. You should take advantage of Redbubble's weekly sale, use the code ALLOFF to get a 20% discount on everything on the site, and grab yourself something nice to make up for the fact that the weekly cycle has begun once more. Get started right here: https://www.redbubble.com/people/Winneganfake/shop Go for it, I don't mind. #casual #fashion #occult #space #scifi #magic #sigil #destiny #gaming #art #casualwear #redbubble #sale https://www.instagram.com/p/BzqMutJJMro/?igshid=rpn0m55pjugy

[planetarduino]

Tutorial – Arduino and Four Digit Seven Segment Display Module

This is a quick start guide for the Four Digit Seven Segment Display Module and Enclosure from PMD Way. This module offers a neat and bright display which is ideal for numeric or hexadecimal data. It can display the digits 0 to 9 including the decimal point, and the letters A to F. You can also control each segment individually if desired. 

Each module contains four 74HC595 shift registers – once of each controls a digit. If you carefully remove the back panel from the enclosure, you can see the pin connections:

If you’re only using one display, use the group of pins at the centre-bottom of the board. From left to right the connections are:

Data out (ignore for single display use)

VCC – connect to a 3.3V or 5V supply

GND – connect to your GND line

SDI – data in – connect to the data out pin on your Arduino/other board

LCK – latch – connect to the output pin on your Arduino or other board that will control the latch

CLK – clock – connect to the output pin on your Arduino or other board that will control the clock signal

For the purposes of our Arduino tutorial, connect VCC to the 5V pin, GND to GND, SDI to D11, LCK to D13 and CLK to D12. 

If you are connecting more than one module, use the pins on the left- and right-hand side of the module. Start with the connections from your Arduino (etc) to the right-hand side, as this is where the DIN (data in) pin is located.

Then connect the pins on the left-hand side of the module to the right-hand side of the new module – and so forth. SDO (data out) will connect to the SDI (data in) – with the other pins being identical for connection. 

The module schematic is shown below:

Arduino Example Sketch

Once you have made the connections to your Arduino as outlined above, upload the following sketch:

// Demonstration Arduino sketch for four digit, seven segment display with enclosure // https://pmdway.com/collections/7-segment-numeric-leds/products/four-digit-seven-segment-display-module-and-enclosure int latchPin = 13; // connect to LCK pin intclockPin = 12; // connect to CLK pin intdataPin = 11; // connect to SDI pin int LED_SEG_TAB[]={ 0xfc,0x60,0xda,0xf2,0x66,0xb6,0xbe,0xe0,0xfe,0xf6,0x01,0xee,0x3e,0x1a,0x7a,0x9e,0x8e,0x01,0x00}; //0 1 2 3 4 5 6 7 8 9 dp . a b c d e f off void setup() { //set pins to output so you can control the shift register pinMode(latchPin, OUTPUT); pinMode(clockPin, OUTPUT); pinMode(dataPin, OUTPUT); } void displayNumber(int value, boolean leadingZero) // break down "value" into digits and store in a,b,c,d { int a,b,c,d; a = value / 1000; value = value % 1000; b = value / 100; value = value % 100; c = value / 10; value = value % 10; d = value; if (leadingZero==false) // removing leading zeros { if (a==0 && b>0) { a = 18; } if (a==0 && b==0 && c>0) { a = 18; b = 18; } if (a==0 && b==0 && c==0) { a = 18; b = 18; c = 18; } if (a==0 && b==0 && c==0 && d==0) { a = 18; b = 18; c = 18; d = 18; } } digitalWrite(latchPin, LOW); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[d]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[c]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[b]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[a]); digitalWrite(latchPin, HIGH); } void allOff() // turns off all segments { digitalWrite(latchPin, LOW); shiftOut(dataPin, clockPin, LSBFIRST, 0); shiftOut(dataPin, clockPin, LSBFIRST, 0); shiftOut(dataPin, clockPin, LSBFIRST, 0); shiftOut(dataPin, clockPin, LSBFIRST, 0); digitalWrite(latchPin, HIGH); } void loop() { for (int z=900; z<=1100; z++) { displayNumber(z, false); delay(10); } delay(1000); for (int z=120; z>=0; --z) { displayNumber(z, true); delay(10); } delay(1000); digitalWrite(latchPin, LOW); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[14]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[13]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[12]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[11]); digitalWrite(latchPin, HIGH); delay(1000); digitalWrite(latchPin, LOW); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[16]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[15]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[14]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[13]); digitalWrite(latchPin, HIGH); delay(1000); digitalWrite(latchPin, LOW); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[0]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[1]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[2]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[3]+1); digitalWrite(latchPin, HIGH); delay(1000); digitalWrite(latchPin, LOW); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[7]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[6]+1); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[5]); shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[4]); digitalWrite(latchPin, HIGH); delay(1000); }

After a moment you should see the display spring into action in the same way as in the demonstration video:

How does it work? 

First we define which digital output pins are used for latch, clock and data on lines four to six. On line eight we have created an array which contains values that are sent to the shift registers in the module to display the possible digits and letters. For example, the first – 0xfc – will activate the segments to display a zero, 0x7a for the letter C, and so on. 

From line 20 we’ve created a custom function that is used to send a whole number between zero and 9999 to the display. To do so, simply use:

void displayNumber(value, true/false);

where value is the number to display (or variable containing the number) – and the second parameter of true or false. This controls whether you have a leading zero displayed – true for yes, false for no. 

For example, to display “0123” you would use:

displayNumber(123, true);

… which results with:

or to display “500” you would use:

displayNumber(500, false);

… which results with:

To turn off all the digits, you need to send zeros to every bit in the shift register, and this is accomplished with the function in the sketch called 

allOff();

What about the decimal point? 

To turn on the decimal point for a particular digit, add 1 to the value being sent to a particular digit. Using the code from the demonstration sketch to display 87.65 you would use:

 digitalWrite(latchPin, LOW);  shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[5]);  shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[6]);  shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[7]+1); // added one for decimal point  shiftOut(dataPin, clockPin, LSBFIRST, LED_SEG_TAB[8]);  digitalWrite(latchPin, HIGH);

… which results with:

In-depth explanation of how the module is controlled

As shown in the schematic above, each digit is controlled by a 74HC595 shift register. Each shift register has eight digital outputs, each of which control an individual segment of each digit. So by sending four bytes of data (one byte = eight bits) you can control each segment of the display. 

Each digit’s segments are mapped as follows:

And the outputs from each shift register match the order of segments from left to right. So outputs 0~7 match A~G then decimal point. 

For example, to create the number seven with a decimal point, you need to turn on segments A, B, C and DP – which match to the shift register’s outputs 0,1,2,8. 

Thus the byte to send to the shift register would be 0b11100001 (or 225 in decimal or 0xE1 in hexadecimal). 

Every time you want to change the display you need to re-draw all four (or more if more than one module is connected) digits – so four bytes of data are sent for each display change. The digits are addressed from right to left, so the first byte send is for the last digit – and the last byte is for the first digit. 

There are three stages of updating the display. 

Set the LCK (latch) line low

Shift out four bytes of data from your microcontroller

Set the LCK (latch) line high

For example, using Arduino code we use:

  digitalWrite(latchPin, LOW);   shiftOut(dataPin, clockPin, LSBFIRST, 0b10000000); // digit 4   shiftOut(dataPin, clockPin, LSBFIRST, 0b01000000); // digit 3   shiftOut(dataPin, clockPin, LSBFIRST, 0b00100000); // digit 2   shiftOut(dataPin, clockPin, LSBFIRST, 0b00010001); // digit 1   digitalWrite(latchPin, HIGH);

This would result with the following:

Note how the bytes in binary match the map of the digits and their position. For example, the first byte sent was for the fourth digit, and the segment A was turned on. And that’s all there is to it – a neat and simple display. 

This post brought to you by pmdway.com – everything for makers and electronics enthusiasts, with free delivery worldwide.

To keep up to date with new posts at tronixstuff.com, please subscribe to the mailing list in the box on the right, or follow us on twitter @tronixstuff.

  Tutorial – Arduino and Four Digit Seven Segment Display Module was originally published on PlanetArduino

[burstmethod]

ALL OFF | Otakon @otakonpics #alloff #live #livemusic #livemusicphotography #livemusicphoto #livemusicphotographer #concert #concertphotography #concertphotographer #band #music #musicphotographer #musicphotography #concertlife #bandphotographer #bandphotos #bandphotography #musicphotos #concertphotos https://www.instagram.com/p/B2xExEFB7UX/?igshid=xark700360an