#computeModule

[adafruit]

A Compact Pi Compute Module Backpack 🍓🥧📸🎒

We used to stock a PiCam Module

that would plug into a Pi CM4 or CM5 - recently we went to restock it, but the vendor hasn't replied to our emails for many months. So, it could be a good time for us to design something that works similarly but with more capabilities. So we tasked Timon

with designing something for us - we just said, "Make the best thing ya can," and he delivered! Check this board out that plugs onto the compute module and provides many great accessories: USB connection for bootloading/USB gadget, USB 3.0 host type A for CM5, micro HDMI, micro SD card for data storage on 'Lite modules, camera connection, and mount, two DSI connectors, fan connect, Stemma QT / Qwiic connection, and RTC battery. There's one shutdown button for CM5 and two GPIO buttons plus one LED. Timon's gonna try to add an EYESPI connector for our next rendering so we can get some I2C/SPI/PWM outputs easily. What do you think? We wanted to keep it compact and not too pricey (aiming for <$30 cost. We'll see if we can get it there) but were able to craft fairly complex projects in a small space.

[adatronixpvtltd]

HPE Synergy 480 Gen10

HPE Synergy 480 Gen10 Compute Module

For more details visit www.adatronix.com

[kurano]

そして、何よりも耐環境的な品質保証を誰がするのか？という、オープンソースハードウェア（今や完全オープンではないが）に永久についてまわる問題は解決されていない。筆者のつたない経験からすると、日本でRaspberry Piを知っている人間が10人いたとすると、ComputeModuleファミリーの存在を知っているのは、そのうち、1人いるか居ないか程度だ。技術職を除いたとするならば、50人に一人くらいだろう。一度でも、Raspberry Piでの信頼性や、産業利用を本気で検討したなら、ComputeModuleのソリューションにはたどり着いていたはずである。つまり、そもそもそういった検討が日本ではまだまだされていない、という逆説的な証明になるのではないだろうか。

Raspberry Pi Compute Module 4がリリースされた | GASKET

[diy-engineering]

A peek inside the component layout of the #rkdr2 #RaspberryPi #computemodule based #handheld #arcade

[adafruit]

Prototype of a Compute Module backpack ready! ⚡🎒

OK, our 10164227-1004A1RLF (https://www.digikey.com/short/3z8mb49f) Compute Module connectors came in, so we're ready to fab this prototype of our Compute Module 4 or 5 backpack. Timon updated it to have an EYESPI connector to bring out some GPIO's and make it easy to connect small displays. There's so much packed on here; we're worried about how we're going to make a test jig for so many connectors! We may need to use an IO multiplexer to address so many pins with a microcontroller - while using a CM5 to do the test sounds 'fun,' it would not be good to have such a delicate board used for testing hundreds or thousands of these in the fabrication department.

[adafruit]

Desk of Ladyada - I2S DACs, Claude API, and Compute Module Backpack 🤖🎒🥧 https://youtu.be/XihMNhTyUlg

Ladyada explores I2S DACs, testing PCM51xx as a UDA1334A alternative. Work continues on the TLV320DAC3100, we test an AI API interface for setters/getters for Claude with pay per token. A new Pi Compute Module backpack is in progress - And we search for tall connectors for CM4/CM5.

[adatronixpvtltd]

Synergy 480 Gen10

HPE Synergy 480 Gen10 Compute Module

For more details visit www.adatronix.com

[adatronixpvtltd]

480 Gen10

HPE Synergy 480 Gen10 compute module

For more details visit www.adatronix.com

[adatronixpvtltd]

HPE Synergy 480 Gen10

HPE Synergy 480 Gen10 Compute Module

For more details visit www.adatronix.com

[adatronixpvtltd]

480 Gen10

HPE Synergy 480 Gen10 Compute Module

For more details visit www.adatronix.com

[diy-engineering]

A peek inside the component layout of the #rkdr2 #RaspberryPi #computemodule based #handheld #arcade