#epoxy coating products

[resinousflooring]

Resinous Flooring Supply is a premium supplier of all of your epoxy and concrete overlay material requirements. Not familiar with epoxy or overlays, give us a call we'd love to talk to you about what makes our flooring systems wonderful for a number of different properties. Our epoxy flooring systems are great for homes, garages, showrooms and other residential, commercial, and industrial properties. Our overlay systems are perfect for pool decks, patios, walkways and provide a wonderful and dafe aesthetic. Our systems are great substitutes to traditional flooring types. Check out our Website or Facebook page to see why so many people are choosing Resinous Flooring Solutions.

https://rfsflooringsupply.com/

[seashield]

Sea-Shield After Care Products

Welcome to the Sea-Shield After Care Products Collection, your number one choice for high-quality aftercare goods made especially for boat repair and maintenance. We provide a wide selection of Sea-Shield coatings, rust stain removers, and boat soaps in our collection, all of which have been professionally produced to maintain your boat's durability and perfect condition.

Why Choose Sea-Shield After Care Products

Yacht crew and boat enthusiasts both choose Sea-Shield Coatings because of our dedication to providing high-quality and innovative boat maintenance products. Our selection includes everything you need to maintain the best possible appearance and performance from your boat or yacht, no matter your level of experience as a skipper or sailor.

Above all, our collection of boat soaps provides mild yet effective cleaning options designed to meet the specific needs of maritime surfaces. Our boat soaps have been developed to remove filth, grime, and salt residue from boats without removing necessary protective coatings, leaving the finish looking brand new and shining.

Rust Stain Remover, Boat Repair Soaps, and More

We provide an effective rust stain remover that removes unattractive rust stains from metal surfaces on your yacht and boat soaps. The specially formulated composition of our rust stain remover allows it to deeply penetrate and remove rust spots without harming the surrounding surface, restoring the elegance and soundness of the metal parts of your boat.

Check out our selection of Sea-Shield coatings to improve longevity and provide additional protection from the elements on your boat. Our coatings offer exceptional protection against corrosion, UV rays, and environmental damage since they have been developed using cutting-edge technology. Your boat's durability and worthiness are preserved for years to come with Sea-Shield coatings, providing you peace of mind that it is protected from the resentful boat environment.

Shop Our After-Care Products Today at Sea-Shield Coating.

Explore our collection today and discover the difference that Sea-Shield Coatings can make in your boat’s surface shine and maintenance routine. We offer everything you need to maintain the finest possible look and performance for your boat, season after season, from boat soaps to rust stain removers to Sea-Shield coatings.

[epoxycom]

What is the difference between Epoxy.com Product #630 and Product #633W

Epoxy.com Product #630 and Product #633W are both epoxy novolac coatings, but they have some key differences: Epoxy.com Product #630 Composition: 100% solids epoxy novolac. Applications: Ideal for harsh chemical and solvent-resistant applications. It can be used as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas. Chemical Resistance: Excellent…

[epoxyresinmanufactures]

Best Epoxy Flooring Manufacturers for Quality Products

When you're searching for top-quality epoxy flooring, picking the right manufacturer is essential. At MB Enterprises, we pride ourselves on being one of the best epoxy flooring manufacturers in the industry. We focus on creating products that are not only durable but also visually appealing and high-performing. By using the latest materials and technology, we ensure our coatings are resistant to wear, chemicals, and impact. 

Our goal is to provide you with a seamless, high-gloss finish that enhances any space, whether it’s industrial, commercial, or residential. We offer tailored solutions to meet your specific needs, with both standard and custom options. When you choose MB Enterprises as your epoxy flooring manufacturers, you're selecting exceptional quality and excellence in every product we deliver.

[xpsxpresschantillyepoxyfloors]

Step Up Your Home Design: Discovering the Perfect Destination for Quality Flooring

When it comes to home design, one of the most important elements is the flooring. It sets the tone for the entire room, and can make or break the overall aesthetic. Finding the right flooring can be a daunting task, but it doesn't have to be. With the right research and knowledge, you can discover the perfect destination for quality flooring. In this article, we will provide you with tips and information to help you step up your home design game.

Flooring Store near me: Tips for Finding Quality Flooring

There are several factors to consider when searching for the perfect flooring store near you. Here are a few tips to help you find the right one:

Reputation: Look for a store with a good reputation. Check online reviews and ask for recommendations from friends and family.

Selection: Make sure the store has a wide selection of flooring options. You want to be able to compare different styles and materials.

Customer service: A good flooring store will have knowledgeable and friendly staff who can answer your questions and help you make an informed decision.

Quality: Ensure that the store sells high-quality flooring that will last for years to come.

Price: Look for a store that offers competitive prices without sacrificing quality.

Now that you know what to look for, it's time to start your search for the perfect flooring store near you.

Types of Flooring

Before you make a decision, it's important to understand the different types of flooring available. Each type has its own unique benefits and drawbacks. Here are some of the most common types of flooring:

Hardwood: Hardwood flooring is a classic choice that adds warmth and elegance to any room. It's durable and can last for decades, making it a great long-term investment.

Laminate: Laminate flooring is a cost-effective alternative to hardwood. It's durable and easy to install, making it a popular choice for DIY projects.

Vinyl: Vinyl flooring is waterproof and low-maintenance, making it ideal for high-traffic areas like kitchens and bathrooms.

Tile: Tile flooring comes in a variety of materials, including ceramic, porcelain, and natural stone. It's durable and easy to clean, making it a great choice for kitchens and bathrooms.

Carpet: Carpet is a soft and comfortable option that adds warmth to a room. It's ideal for bedrooms and living rooms.

Choosing the Right Flooring for Your Home

When choosing the right flooring for your home, consider the following:

Room: Different rooms have different needs. For example, you may want to choose waterproof vinyl flooring for your bathroom and durable hardwood flooring for your living room.

Style: Your flooring should complement your home's overall style. For example, if you have a modern home, you may want to choose sleek laminate flooring.

Budget: Flooring can be a big investment, so it's important to choose something that fits your budget. However, keep in mind that high-quality flooring will last longer and save you money in the long run.

Step Up Your Home Design Game with Quality Flooring

Flooring is an important element of home design that can make a big impact on the overall aesthetic of your space. By following these tips and doing your research, you can find the perfect destination for quality flooring. Remember to look for a store with a good reputation, wide selection, knowledgeable staff, high-quality products, and competitive prices. Once you find the right flooring for your home, you can step up your design game and create a beautiful and comfortable space that you'll love for years to come.

 Continuing on the topic of finding the perfect flooring store near you, it's worth mentioning XPS Xpress - Chantilly Epoxy Floor Store. This store is a great option for those looking for high-quality flooring solutions.

XPS Xpress - Chantilly Epoxy Floor Store offers a wide selection of flooring options, including epoxy flooring, polished concrete, and stained concrete. These flooring options are not only stylish but also durable, making them ideal for both residential and commercial use.

In terms of reputation, XPS Xpress - Chantilly Epoxy Floor Store has received positive reviews from customers. Their staff is knowledgeable and friendly, providing excellent customer service to help customers make informed decisions.

One of the unique features of XPS Xpress - Chantilly Epoxy Floor Store is their ability to provide custom designs for their epoxy flooring solutions. Customers can choose from a variety of colors, patterns, and finishes to create a truly unique and personalized flooring solution.

When it comes to budget, XPS Xpress - Chantilly Epoxy Floor Store offers competitive prices without sacrificing quality. Their high-quality flooring solutions are designed to last for years, making them a worthwhile investment for any home or business owner.

In conclusion, XPS Xpress - Chantilly Epoxy Floor Store is a great destination for those looking for high-quality and stylish flooring solutions. With their wide selection, knowledgeable staff, and competitive prices, they are definitely worth checking out for your next flooring project.

XPS Xpress - Chantilly Epoxy Floor Store

14155 Sullyfield Cir # E, Chantilly, VA 20151

(703) 890-5207https://xpsxpresschantilly.com/

[arunrazer]

Where Can I Buy Belzona 1161 in UAE?

Belzona 1161 is a two-part, high-performance ceramic repair composite used to repair and rebuild damaged equipment, machinery and structures. It is a versatile and durable material that can be used in a wide range of applications such as chemical, oil and gas, marine, power generation and many other industries. Once cured, it forms a hard, abrasion-resistant and chemically resistant surface that can withstand high temperatures and pressures.

These ceramic repair composite is easy to mix and apply, it is ideal for rebuilding and repairing equipment and machinery that is exposed to harsh environments. It can be used to repair and rebuild metal and concrete surfaces, and can be used in both underwater and above-water applications.

If you're looking to buy ceramic repair composite that can help you repair and rebuild your damaged equipment and machinery, contact GSET. Gulf Safety Equips Trading LLC is the leading suppliers of Belzona products in UAE. Browse through their website today to order yours and experience the difference that a high-performance ceramic repair composite like Belzona 1161 can make in your operation.

[pinkrelish]

𝐭𝐡𝐞 "𝐲𝐞𝐬" 𝐩𝐨𝐥𝐢𝐜𝐲 | 𝐞𝐱𝐭𝐫𝐚

singledad!mechanic!eddie x fem!reader

✶A deleted scene from chapter twelve where receptionist!reader acts like a bimbo in front of Eddie just to rile him up. Written very tongue-in-cheek at the beginning.✶

NSFW — sexual themes, handjob, unresolved sexual tension, 18+

↳ start the story here to catch up!

[wc: 2.1k]

Heeding your checklist of chores, you idled at the workbench against the far corner of the wall. There were a few of the usual things you organized: placing nuts and bolts in drawers, facing products with their labels out, tidying small boxes, folding the end of the paper towel roll so it didn’t unfurl itself in the turbulent path of the oscillating fan. You bent over to toss cellophane wrappers into the waste paper bin, and took your time musing if the liner should be changed despite the little amount of balled up paper weighing down the bottom. Standing, you swept off the unsanded tabletop with your hands, and worked a crusty rag over an oil streak, making a mental note to call the laundry service to swing by a day early.

As you stepped away, you knocked a pencil to the floor. Its bright yellow body was impossible to miss, along with its excruciatingly long hexagonal roll carried by your elbow to the very edge, but you managed. You knelt to your hands and knees to retrieve the writing utensil, inspecting its broken tip. The graphite was missing completely, leaving behind an empty hole where it once was. An unfortunate accident. You rotated it a few times looking for other flaws—an honorable way to spend your time.

“You doin’ this on purpose?” gruffed out an annoyed voice behind you.

No need to check, you heard the amused twist at the corner of his lips. His left canine was probably on show, too. Not in a hurry to confirm, you gripped the pencil in your fist, and leaned forward, stretching in search of the missing lead before it was stomped into dust and potentially transferred from someone’s boot sole into a wealthy client’s car. You were thinking of them, really.

The floor was a rewarding oasis in the noonday sun baking through the warehouse windows. Your flat splayed hands and knuckles worked over the grit of dirt to inch your pursuit closer to the wall, drinking in the chill of the epoxy coated concrete cooling you down better than a 50 cent clear plastic cup of Kool Aid at a kid’s misspelled lemonaide stand. Though, the unforgiving flooring bit into your joints, and indented your knees with the netting of your pantyhose. But Eddie’s study did not sway to your shoe slipping off your heel. No, he was a gentleman. And as a gentleman, he praised the wealth of curves you put on display.

He used the heels of his heavy boots to drag himself from under a Mustang, thumping up beside you, wheels on the creeper rolling along the slick floor.

The lower you dipped your chest, the higher your skirt hem tickled the back of your thighs. In total innocence—truly giving your best effort to find the missing pencil tip—you tilted your hips to unimaginable degrees, presenting your ass to the point even your lower back side-eyed your act.

Smooth backs of fingers lifted the hem more. Eddie curled his index under your skirt, and assisted it to the crease of your cheek, following the change in nylon with his rough thumbprint as it wove denser around your thighs to hold you in. Tummy Control, it was advertised as. To a man who had seldom encounters with women, this meant very little to him, as did the change in texture. Though, curiously, he rubbed at it with interest.

“You’re something else, you know that?” But his voice was too playful to shame you, hardly traipsing through his throat to chastise. “I’m out here working my ass off, and you’re struttin’ around the garage in this lil’ piece.” The little piece in question was your corporate approved pencil skirt from a long forgotten temp job when your apartment lost two roommates in a breakup, and rent was past due.

Pandering to your audience of one, you shuffled two of the tiniest inches backwards, and steadied your hand on his outstretched leg. You bent at the hips, filling his large palm with a handful of your ass, and he admired you in a brush of fingertips near the innermost valley of your thigh, licking a divine chill up your spine. Playing along, you pretended to just notice him, assuming a sinless gasp, and following it with many airheaded inflections, “Oh! Didn’t see you there, handsome. Am I distracting you?”

The standing fan swung its head in your direction, sweeping Eddie’s bangs off his forehead in a brief burst.

You’d been on hundreds of dates, and not once had you been so deeply complimented by someone’s gaze.

Eddie dwelled in the distraction. He stroked his thumb over the fat, and traced his pinky along the hypersensitive crease before the swell which had your muscles tightening in a squirm. He was so close to the middle seam of the pantyhose. Perhaps he knew this as well, but didn’t care—he was just happy to be touching you. Laid out in the neon orange creeper, sun glancing off the packed garage, casting a glow across his puffy face. Sleepy eyes, messy hair, unbearably adorable grin—the type of candid expression showing how honored he was to look at you, so forthcoming and open. A trap, if there ever was one, luring you into picturing him twisted amongst your bedding on a late morning.

As he tracked his gaze over your backside, an aching reminder moseyed its way into his consciousness. Setting into a glare, he forced his way through any pleasantness lingering in his chest to tell you plainly, “Sweetheart, you’re fucking torturing me here.” You giggled, and he broke, falling victim to the squinch at his crow’s feet.

“You think I’m not torturing myself, too?”

“Dunno.” He craned his head back to check underneath the car for where each pair of boots were moving, and you peeped through the driver’s side window to keep tabs on the seated customers in the lobby. Once you both ensured there was no danger of being caught, he turned his attention to you fully. “You’re not wearing my favorite pair, so I couldn’t tell.” In case you weren’t sure, he wrung his hand around your leg, and drummed his fingers where there should be an easily accessible hole in your tights, where he could drag his fingers through your slick truth. His sorry features were tainted with remorse when your plush thighs weren't spilling out from the nylon; however, he drew his eyebrows in mock sympathy, and traced the area. “Could make these my new favorite pair, though.”

You about melted into a puddle of dumbstruck glee at his first foray into initiating dirty talk. “Yeah?” you stressed the word like he would—big smile and all. You raised the placement of your grip on his leg up, further, still going until the inside of your thumb threatened to assist what laid fat and heavy towards his hip. Car exhaust, pungent motor oil, and fumes swam in your head. Mind dizzy, you skimmed your nails over his heavy sack pressed tight against the seam of his coveralls. An implied line was drawn along your heat by his featherlight touch. You leaned over him, real close, chest over chest, knees spread because his hand encouraged you to do so. Mouth to mouth, considering kissing the dirt from his lips. “Wanna rip ‘em, and have me on top while you’re on this thing?”

Eddie moaned, and it wasn’t shy in the loud garage. “Want it so fucking bad, baby.”

A single ding from the bell atop your desk drew your attention.

Bodies paused, you both existed in the indecision of what to do. Eddie’s forehead wrinkled from his high brows driving his attention backwards, peering under the car again. The other employees of David’s Auto Repair shuffled around a Studebaker. There was no one inside to help the customer. What a shame.

Eddie lowered his chin in long clockticks, seeking you behind his heavy lashes and heavier gaze. His nose met the side of yours in an unrefined graze, dragging his chapped lips wherever he felt your smile. He kissed you hungry. Needy, desperate to fit the magnitude of his palm at the back of your head, and dirty your mouth with noses mashed together. He wanted you messy, he wanted you catching your balance on the creeper for the same reason his held sigh became your next breath, taking a pinch of your pantyhose over your pussy and twisting it around his fist to demonstrate his annoyance, as if the dull ache of your bottom lip against his teeth wasn’t illustrative enough. The peak of your whine and his approving hum tethered the snap of your tights and the squeeze he left on your thigh. Filthy warmth blanketed the top of your hand. Stifling hot, calluses running rough over your knuckles as he cupped your palm over his hard length, and curled your fingers around himself, kicking his hips up to really stretch the limits of your grip. Together, he guided you in a few teasing pumps along the base, ego growing at the pretty sound hitched in your throat.

“Hey, Ed!” Mr. Moore’s yell burst the bubble you two surrounded yourselves in. “C’mere, ‘nd look at this.”

It wasn’t an emergency. It could wait. There were enough mechanics on duty, they could figure out what they were gawking at, or admiring, or whatever it was they were doing. That was the justification behind your shared look with Eddie, and the tension holding you two apart faded within seconds. If anything it spurred you on. You raked your fingers through his hair, mussing the roots at the crown of his head, covering the side of his body with yours, stroking his cock. The consequences didn’t matter. He increased the pressure and showed you how he liked it when you looped your thumb and index around the edge of his fat tip and pumped him faster—

Ding, ding, ding.

The kiss slowed from the distraction, but you tried to keep going, staying in the moment with Eddie’s praise burning your cheeks. He was eager, he was close. He was whispering, “Feels fucking good when you—yeah—like that,” when you added the twist of your wrist to the end of motion.

“Ed!” Mr. Moore’s voice ruined the moment. “Where’d he… And wasn’t she at her desk a second ago?”

Ding, ding ding!

Your foreheads crashed together in a defeated groan.

Eddie sagged completely limp on the creeper. “Why do you do this to me?” He dropped his arms in a big shrug, kicking his legs out flat, throbbing hard in your palm. You curbed the urge to keep going and dragged your fingers away.

“Hey, you’re the one who started this,” you sniffed, sitting back to fan your face in effort to make yourself presentable while he considered rolling under the car for the next eternity to hide his blazing red cheeks.

“I was a good worker before you came along,” he argued, pointing at you with a nail outlined in grime. He did it with such vigor his shoulders curled off the creeper, sitting up to give you a real good talkin’ to. “I never did this sorta shit with anyone before you showed up. You’re bad for me. You drive me crazy.” Not an ounce of anger dared enter his tone, not even having strength to control his smile from going lopsided, dimpling, nose scrunching in a badly contained laugh. Never would he want you to think he was mad at you, even as a joke. He was soft like that.

Eddie broke first, and that’s all you needed to kiss him against the black Mustang door, thud on the metal deadened by his nervous hand coming up to brush his curls flat.

“You drive me crazy too,” you promised against his lips. “Now, try not to cum your pants when I bend over to get this trash, and have fun explaining to the guys why you can’t stand up for the next few minutes.” You cocked your head, and smacked your tongue in a hard, “‘Kay?”

He glared at your smugness. Glared at your backside, too. Scowled at his grip formed around the swollen length rising so obvious no matter how he fixed his legs, and surrendered to the humiliation of laying back on the creeper, summoning enough dignity to roll himself to the other side where a gaggle of boots scuffed the ground in search for him, and give some excuse that he was very busy fixing something and wouldn’t be available for the foreseeable future.

originally thursday's section in chapter twelve was split into three separate scenes. i was almost finished writing the first two when i took the section in a different direction and mashed all the important elements into the scene in the breakroom which did make the cut. truthfully i had only written to eddie's line of "wanting it so badly" and they would've gotten interrupted at that point (before any touching), but since this isn't exactly canon, i went ahead and had fun and made it a little spicier.

you might also recognize some imagery, lines of prose, or descriptions i salvaged from this piece and put into the final one!

[blogport]

EPOXYSHİNE - DRAGON+ (3)

Epoxy floor coating is not just a practical choice for enhancing the durability of your flooring; it's also a stylish solution that can transform any space. Whether you're a homeowner looking to revamp your garage or a business owner seeking reliable commercial flooring solutions, understanding the benefits of epoxy will help you make informed decisions. As you search for "floor polishing near me," consider how an expertly applied epoxy coating can elevate your interiors while providing a long-lasting finish. 

Epoxy Floor Coating

Epoxy floor coating is a highly durable and resilient flooring solution that has gained popularity in both residential and commercial spaces. This type of coating is made from a combination of resin and hardener, creating a strong bond when applied to existing concrete surfaces. The result is a seamless surface that can withstand heavy foot traffic, chemicals, and abrasions.

One of the major benefits of epoxy floor coating is its versatility. It can be customized in various colors and finishes, including high-gloss and matte textures. This means that property owners can choose a look that complements their interior design while still providing the durability they require. Additionally, the smooth finish of epoxy makes it easy to clean and maintain, which is particularly advantageous in commercial settings.

Furthermore, the installation process for epoxy floor coating is relatively quick, often completed within a few days. However, it’s essential to hire professionals who have the expertise and equipment to ensure a flawless application. The right team will properly prepare the surface, allowing for optimal adhesion and longevity of the coating.

Floor Polishing Near Me

When searching for floor polishing near me, it's essential to find a service that not only meets your expectations but also understands the unique needs of your flooring. Professional floor polishing can revitalize old surfaces, restoring their shine and luster while protecting them from future wear and tear.

Many local companies offer specialized services in floor polishing that cater to various materials, including hardwood, tile, and concrete. A quick search in your area will yield numerous options, allowing you to compare prices, services, and customer reviews to find the best fit for your needs.

Additionally, hiring professionals for floor polishing ensures that the job is done correctly and efficiently. They use advanced equipment and high-quality products that not only enhance the appearance of your floors but also extend their lifespan. So, don't hesitate to reac

Commercial Flooring Solutions

Commercial flooring solutions are essential for businesses seeking to enhance their aesthetic appeal while also ensuring durability and functionality. The choice of flooring can greatly influence the overall atmosphere of a commercial space, leading to improved employee morale and customer satisfaction.

Among the various options available, epoxy floor coatings stand out due to their seamless finish and resistance to heavy foot traffic. These coatings not only provide a sleek look but also protect the underlying surface from wear and tear, making them ideal for warehouses, retail spaces, and industrial environments.

Moreover, businesses often explore additional options such as vinyl flooring, carpet tiles, and laminate surfaces to meet specific needs. Each of these materials offers unique advantages, allowing business owners to choose the most suitable flooring solution that aligns with their operational demands and aesthetic preferences.

Metallic Epoxy Floor

A metallic epoxy floor offers a stunning visual appeal that enhances the aesthetic of any space. The reflective properties of the metallic pigments create a unique look, resulting in a three-dimensional effect that can mimic a variety of surfaces, such as water, marble, or even molten metal. This type of flooring is especially popular in modern homes, showrooms, and commercial spaces, providing an eye-catching yet durable surface.

One of the significant advantages of a metallic epoxy floor is its durability. This flooring solution is resistant to stains, chemicals, and impacts, making it ideal for high-traffic areas. Additionally, it is easy to clean and maintain, which means that business owners and homeowners can save time and resources. The seamless nature of epoxy flooring also contributes to a hygienic environment, especially in spaces like hospitals or laboratories.

Installing a metallic epoxy floor can be a customized process, allowing property owners to choose their preferred colors and patterns. Whether you’re looking for a sleek, industrial look or a vibrant, artistic finish, this flooring solution can be tailored to meet your unique vision. By consulting with professionals, you can ensure that your metallic epoxy floor is installed correctly and maximizes its longevity and beauty.

[phanie98arts]

Persona Protag Bear Keychain✨

✨Get yours for only $12 USD

✨ Digitally Drawn Designs

✨Coating : Epoxy Glitter

✨Characters from the Persona Series

✨Fan Art

✨Size: 2.5 Inches

✨Enjoy this cute acrylic keychains that you can hang on your bag, pencil case, etc.

✨Colors of the product may differ from the lighting of the picture.

✈️International Shipping is Available

Here is the link to buy my Persona Keychains:

[andsewingishalfthebattle]

SiliNOT! Testing and Review

Since I run a lot of casting workshops, I've had several people in the costuming/maker community ask me my opinion on SiliNOT!, a relatively new product advertised as a budget- and eco-friendly moldmaking alternative to silicone, urethane, and other single-use materials.

I finally bought a couple of bottles to play with, so I did a test project. My experience and findings are below! (It's not a recipe blog, but if you want to skip the play-by-play and get to the TL;DR, it's under the big "In Summary" header near the bottom.)

First, if you aren't familiar with this material, SiliNOT! is a remeltable, reusable medium for making molds. Though its exact ingredients are not disclosed, it purports to nontoxic, food-safe, and compostable. It melts in a household microwave or double boiler and solidifies at room temperature (or in a refrigerator/freezer for faster results). The website is https://silinot.com/.

(I am not an affiliate, and have no connection to this company apart from having made one retail purchase from them. I just have a lot of casting experience and like trying out new products.)

The Positive Original

I’m still in the middle of a Vincent Valentine build, so I decided to test the SiliNOT! on his custom buttons. My original is a stack of various nonporous materials: an antique (probably Bakelite) coat button, an epoxy resin dome I cast using a mold I already had in my library, and some engraved Worbla’s Pearly Art for the raised detail. The button shanks won’t be added until the final casting, so the original can be mounted flat for the moldmaking process.

Sample Worbla on the left; completed button stack on the right:

The Mold

I built the mold container the same way I do for silicone pours, with the flat back of the button fixed to a styrene plate and a cylinder (actually a small paper cup with the bottom cut off) surrounding it for the walls. The lip of the cup is sealed all the way around with Monster Clay to prevent leaks.

Heating and Pouring

The SiliNOT! didn’t take long at all to heat up; I did maybe four or five 20-second bursts before it was completely fluid. The bottle does get rather warm, so hand protection isn’t a bad idea. If you have heat-resistant gloves, you can use those; I was working in my kitchen (yay for nontoxic stuff!), so I just grabbed an oven mitt with a silicone grip.

The melted SiliNOT! looks a bit like Luke Skywalker’s blue milk. It’s about the consistency of a yogurt smoothie and likes to pour in a thicker stream compared to silicone. While silicone can be stretched into a thin ribbon for delicate pours or chemically thinned with solvent for really tricky jobs, SiliNOT!'s viscosity is dependent on temperature and never seems to get quite as thin as silicone.

I’d automatically made my mold compact to conserve material (not really a concern with a reusable moldmaking material like SiliNOT!, but after using silicone for more than a decade, I’ve trained myself to be as efficient as possible), so the walls of my mold container were only about half or three quarters of an inch from my object. Because the target was so narrow, I found it difficult to accurately fill from the lowest area of the mold with the SiliNOT! The heavier pour also means more air can get trapped in or under the material.

Bubbles are one of the areas in which SiliNOT! is decidedly inferior to silicone. SiliNOT! has higher viscosity, so bubbles don’t want to rise to the surface without vigorous tapping, which can distort the mold edges or affect leveling depending on your mold container. The bubbles that do make their way to the surface are difficult to pop, even when poked with a sharp implement. Heat gun degassing doesn’t have much effect.

Since the bubble surface cools and skins over quickly, I actually had to use a tool and scoop some large bubbles completely out of the mold to allow the surface to level. Critically, the SiliNOT! is opaque, so you can’t spot bubbles clinging to the surface of your original. (This is why my first mold was a reject, and I had to repour. More on that below.)

Hardening

Once the surface had set, I carefully moved the mold into the refrigerator to cool faster. Here’s another area where some types of silicone can have an advantage: I typically use fast-curing Smooth-On products (because I always have random quantities left to use up after our casting workshops), so I rarely have to wait more than half an hour for a silicone mold to cure, regardless of its size or mass.

The SiliNOT! has to chill completely before handling, though, and discharging that amount of heat requires a fair amount of time even in a cool environment. My mold was pretty small, maybe 2 1/2” wide by 1” deep, and it still took around 40 minutes to cool completely. A larger, deeper mold could hold considerably more energy in the center, and might have to be left in the freezer for a couple of hours before use.

Demolding the Original

When the mold was completely chilled, I removed it from the refrigerator and popped it off the plastic plate I’d used for the base of the mold. The texture was very different from what I’d expected: Unlike other meltable materials (Monster Clay, et al.) that have a firm surface when cool, the SiliNOT! remains tacky, which means it promptly collects any debris that crosses its path. In my case, this meant I had to pick dog hair off the surface throughout the casting process (and I don’t want to think about what would happen if glitter had contaminated the work space).

I’d used a paper cup for my mold walls, which usually works fine with fast-curing silicone. But the SiliNOT! must have a high oil content, because the cup absorbed some of it:

Lesson learned; use only nonporous containers with this stuff.

The SiliNOT!! really wanted to cling to the edges of my original, so I had to go slow at first to avoid tearing the thin flanges of the mold off. However, it did demold nicely from the smooth surfaces, and preserved texture very well. You can see the Worbla pebbling and the engraving channels clearly in the mold (as well as some dust and dog hair, because I made the mistake of setting it down briefly):

Unfortunately, as you can see, a large bubble had stuck to my original and created a pit in the mold, so I decided to do a second mold pour. I figured I’d tear up the failed mold and put the pieces back in the bottle to remelt… and discovered I couldn’t. The mold would stretch and twist, but not tear. It also seemed to return to its original shape relatively faithfully. Here’s a video of me manhandling the mold:

As you can see, the SiliNOT! has much better stretch and recovery than many silicone products (there are silicones that stretch well -- some of the Dragon Skin products come to mind -- but they’re not typically marketed for moldmaking). This means it’s likely well suited to casting objects with moderate undercuts or oddly-shaped bits that need the mold to stretch during demolding.

You can cut the SiliNOT! easily with scissors, which is the recommended method for getting it back in the bottle when you’re ready to remelt.

Take Two

Using what I’d learned from the first pour, I did the second one inside a hard plastic ramekin. This gave me a bit more room to pour into the floor of the mold, reducing the bubble risk, and also eliminated the porous paper cup that had absorbed oil. I still had the issue with bubbles that didn’t want to pop, but there were fewer of them this time.

The ramekin made for a much cleaner mold, buuuuut there was ANOTHER BUBBLE right in the middle of the design. >.<

Take Three

Lather, rinse, repeat. Or in this case, melt, pour, chill.

This time I heated the SiliNOT! as much as I dared and did the absolute slowest, narrowest pour I could manage, giving the air extra time to escape as the mold was filled from the bottom. The risk with stringing out the pour like this is that in a thinner stream, the heat escapes faster, leading to uneven viscosity as the liquid fills the mold. I don’t think that’s a major problem for this particular piece, but it’s something to pay attention to as regards leveling and degassing, especially for larger molds that will take longer to fill.

The result of pour three:

/siiiiigh/ Well, at least the bubbles are smaller, this time. They may not show up enough to matter in the final cast. I’ll give it a try.

Casting

I had leftover workshop resin that was getting on toward the end of its shelf life, so I used Smooth-On Smooth-Cast 300 for my initial resin trial. It’s an opaque white resin with about a 10-minute cure time (the fast turnaround is why we use it for workshops).

Before pouring, I had to do a little mold cleanup where the SiliNOT! had managed to sneak under the edge of the Worbla (I think I’d loosened the corner of the star from prying it out of so many molds), but since the SiliNOT! stretches so well, it was pretty easy to invert it to get little scissors down into the bottom of the depression.

For the first cast, I didn’t use anything but the resin in order to get a baseline. Ideally I’d like to cold cast or dye the resin so I don’t have to worry about paint chipping, but since I’m doing a trial here (and need multiple buttons anyway) I figured some plain white extras wouldn’t hurt.

So, my first cast…

…smacked into a big problem, which I probably should have seen coming: The resin I’m using is a fast cure formula, which means it discharges a fair amount of heat as it's going through that rapid chemical reaction -- enough heat to melt the SiliNOT!, as it turned out. When I tried to demold it (after giving it a few extra minutes beyond label time to be sure it was done), the surface of the mold had melted to the resin and even embedded itself in a few places. It’s difficult to see the resin detail in the photos (my camera went into white balance panic mode with all the shades of white and blue), but you can see how pitted the formerly-smooth mold surface is.

In fairness to the SiliNOT!, the bottle does say that you should put the mold in the freezer for half an hour before casting high-temperature materials. But I assumed high-temperature material was something like candle wax or melted chocolate, rather than ordinary resin. (And the mold had just come out of the refrigerator.)

So, on to pour FOUR of the SiliNOT! mold…

Take Four

NGL, this is getting a little old. >.<

Fourth mold definitely needed some cleanup around the edges, and there are still a couple of tiny bubbles I can’t seem to get rid of, but it’s good enough for a test. (I’m starting to despair of using these for actual production, given how many times I’ve had to redo the molds because of bubbles...)

Deep in the recesses of my basement, I found some transparent epoxy resin with a 24-hour cure time -- much slower and lower-temperature than the Smooth-Cast. Since it cures clear, I went ahead and mixed in some metallic powder pigment on the off chance that I get a usable button out of this one. I had excess resin after mixing, so I poured that into my first mold, which has a bubble in the design but is otherwise fine. Two test pieces are better than one, right?

Results

Here are the results of the slow-curing resin out of mold #4:

Finally, a (mostly) clean cast!

As you can see, the detail reproduction is excellent -- certainly on par with the pulls from the silicone mold I ended up making while waiting on this set to cure (purely for time reasons; I couldn’t afford five days to cast the buttons using slow-curing resin, and with a silicone mold and fast-curing resin I could get them all done within a couple of hours).

However, you can also see a few spots where bits of the SiliNOT! embedded themselves in the final cast. Part of that may be due to design flaw in the original; I didn’t want to glue anything permanently to the antique button, and that resulted in a tiny gap between the button and the resin hemisphere. Silicone has enough strength to resist tearing out in that kind of area, but apparently the SiliNOT! doesn’t. The bits of mold around the outer edge seem to have stuck just to be difficult, as there was no structural reason for those to have become embedded in the resin. This means the mold could be damaged by successive casts, reducing its usable life and accuracy.

Still, the mold definitely produced decent results for a first cast, and a different shape might not have had as much of a problem with tearing off mold parts. The slow-curing resin is a bit of a limitation, but not a unique one (I use this same epoxy resin for any glass-clear casts I do, and only use the Smooth-Cast 300 for opaque items or things I need very quickly). I don’t personally use UV resin, but I’d be curious to learn how it performs with the SiliNOT!

IN SUMMARY:

Here’s the TL;DR on SiliNOT!

Pros

Cost effectiveness. This is the most obvious advantage of SiliNOT! over silicone; it’s (theoretically) infinitely reusable, and even with natural attrition/inevitable contamination from use, you can likely get over a hundred pours out of a bottle. That's a lot cheaper per use than silicone.

Non-toxicity. SiliNOT! is touted as food contact-safe, so you don’t have to panic if you get it on your skin or kitchen counters. While platinum-cure silicone is also relatively harmless (some varieties are labeled for food or life casting), other common moldmaking materials such as tin-cure silicone or urethane are not. (NOTE: Since the company is very hush-hush about what actually makes up the SiliNOT! secret formula, I do not know if it might release any vapors or fumes that would be irritating or harmful to pet birds. In general, I advise not doing any kind of casting around birds.)

Eco-friendliness. This is the biggest draw for me personally: Given the number of casting workshops I run and all the things I sell commercially, I have constant guilt about the amount of waste I generate for creative projects. In most areas of life I’m an aggressive reduce/reuse/recycler and try to use organic materials instead of synthetics whenever possible, so a mold that’s reusable and compostable is very appealing.

Ease of use. It’s honestly pretty hard to mess this up -- just microwave according to the directions and pour. No measuring, no A/B mixture, no concerns about chemical contamination from latex or sulfur, etc.

Shelf life. Unlike silicones, which have a shelf life of anywhere from six months to three years depending on storage conditions, the SiliNOT! purports to be shelf-stable. It's compostable, so don’t bury it in your yard, but otherwise it appears that it could be kept on hand for years.

Cons

Bubbles. Honestly the most irritating thing about this stuff for me. I’m used to being able to see bubbles forming as I pour, tap them to the surface, and remove them. The fact that I poured four molds of the same object and never once got one without bubbles is super irritating.

Stickiness. I’m not a big fan of the tacky surface texture, and while I haven’t done any cold casting yet, I can imagine that it would be very difficult to clean out any pigment or mica powder that got where you didn’t want it. I probably wouldn’t use this for any kind of cold casting that required isolated colored areas or changing colors between casts.

Set time. The SiliNOT! may take longer to cool than a fast silicone would to cure when dealing with larger molds, so it’s not ideal for projects with a really tight turnaround. (But cosplayers would never be casting something the night before a con, right? We always plan ahead and never, ever procrastinate!)

Library life. The SiliNOT! may or may not structurally degrade over time the way urethane, latex, and tin cure silicones do, but I noticed even in my very limited casts that it was prone to having tiny bits of the mold (particularly at edges) stick and pull off. While I keep most of my platinum silicone molds for years and reuse them, I don’t feel that the SiliNOT! molds would hold up to repeated casting, and they’re far more sensitive to ambient temperature, so they’re probably best used for short term only. (I also wonder about the possibility of oil leaching out in long-term storage.)

Comparative Ranking

Ranking it against other mold-making materials, I’d place SiliNOT! below platinum-cure silicone in terms of performance, but maybe somewhere in the neighborhood of urethane and tin-cure silicone. It's definitely superior to latex. (Though to be honest, I'd rank Play-Doh above latex. I hate working with that stuff.)

Factoring in cost and environmental impact, it beats out urethane and tin-cure silicone. I'm still not sure if I'd rank it above platinum-cure silicone, though... Silicone costs much more and isn't eco-friendly, but the performance and lifespan is significantly better, so it still makes more sense for some projects.

Alginate is another type of material entirely, but in some ways SiliNOT! is comparable to it -- both are more cost-effective than silicone, both are biodegradable, both are skin safe, and both have long shelf lives. But SiliNOT! is easier to use for beginners than alginate, which has to be mixed to the right consistency and has an extremely short lifespan once poured.

Overall, I would recommend SiliNOT! for:

People who want accurate, non-shrinking molds but don’t have the budget for platinum-cure silicone

People who are committed to eliminating waste from single-use materials, and are willing to trade off a little performance for a more eco-friendly material

Projects with smooth surfaces and no indentations/sharp edges/undercuts where bubbles might stick (e.g. cabochons; simple geometric forms)

Projects where you need only one or two casts of something, rather than many casts from the same mold

Casting oddly-shaped pieces around which the mold needs to stretch in order to demold

Use with slow-curing resins that do not generate much heat

I would NOT recommend SiliNOT! for:

Extremely complex or detailed pieces, or pieces with a lot of surface texture that bubbles might stick to

Two-part molds

Projects requiring many identical casts out of the same mold

Molds that you intend to add to your library for future or repeat casting

Use with fast-curing resins, melted wax, melted Monster Clay, or any other material that emits heat

Cold casting with precise color application

My Overall Opinion

It's... okay? I will almost certainly keep SiliNOT! in my toolkit for certain specific applications. It's MUCH cheaper over the long term, I love the idea of recycling mold material, and there are some projects for which it will likely perform very well (those listed in the above bullet points). I will also admit that three days of working with it does not constitute a comprehensive familiarity with the product, and it might be the sort of thing that you get better at working with after more practice. (Just learning how to eliminate bubbles would go a long way toward making me adopt this for more projects!)

However, I don't quite buy the "better than silicone" tagline. It's definitely more difficult to get a perfect result, and there are some projects for which platinum-cure silicone is always going to be more reliable (e.g. high-temperature casting, mass production, large-scale life casting).

For those looking for a recommendation of whether or not to buy, I'd say look at your project budget and the applications for which you're going to be making molds, and let those factors guide which mold material you go with. People doing some kinds of projects are likely going to find this a godsend, while those doing different projects would probably hate working with it.

[ireton]

When the ABC (Australian Broadcasting Corporation) deceive the public, here is the real story from the farmer.

Mainstream media propaganda current affairs show 'The 730 Report' interviewed this farmer about his concerns of 'renewable' energy Wind Farms in the Central West of NSW.

This is what they didn't put to air, the real story.

* Each wind turbine has 2000 tonnes of concrete in its base. * Each wind turbine has 600 tonnes of steel in its tower (not including the reinforced steel in the concrete base). * Each wind turbine blade contains unknown amount of carbon fibre and epoxy and coated in Bisphenol A (BPA) which is extremely toxic to humans, animals and the environment, and degrades over time, leaching into the surrounding areas. * These wind turbines produce unknown effects on stock fertility. * These wind turbines are an impediment to food production. * These wind turbines produce bugger all power. * Twiggy Forest (mining "doctor") is involved, as always. * Any compensation to farmers is minimal and does not come anywhere near helping the situation. * Concerns for future generations.

[troxlerfx]

hello!! i am troxler (trox if you're nasty) and you might know me from my xwitter @ broadcastrelay or my old experimental art blog @hand-in-hand-again .

this blog is sfw. i have a more reblog-heavy nsfw sideblog, @heartshapedsignal , where i can place aesthetics, rb art that i like, Cronenbergpost & generally toss up more intense horror things & keep this one somewhat more tidy + personal-art-oriented. follow my alt if you please; although it's unlikely i'll ever post anything too explicit, there is nsfw/🔞 potential, so again, heartshapedsignal is 🔞 just to be safe!!

i have a throne account here if you'd like to support my work by helping with supplies & thereby earn my eternal gratitude:

commissions are currently closed & i will update here & on xwitter if that changes!!

i do have discord if you'd like to chat, you can DM me for my username. i'm vision impaired & it's a little easier for me than tumblr DMs (scalable font. properly mapped keyboard that allows me to hit the right keys occasionally. you know 👁️)

i am sometimes slow to respond to messages, but i don't expect you to be available all the time either--i answer things when i have a moment, & i assume others do too ✌️ i have the temperament of a displaced 11th century anchorite, am simply not adapted to the tone & pace of centralized social media.

i also unfortunately cannot voice call or stream/screen share because i am a millennial (just kidding, it's because my phone is almost 9 years old & it overheats when i check my e-mail)

learn a bit more about me under the cut ✂️

i was dropped into this simulation in the early 80s, i'm a disabled artist (vision impaired - [ask me about my atrophied optic nerves] - & have some other physical Issues so i use a cane) & my wife and i host two black cats, roughly 35% of a mannequin, and a whole lot of dolls.

all my art is trad/physical media (haven't figured out a way to make digital art accessible yet. maybe someday!!) i like to sculpt in epoxy, plastilene, polymer & stone clay, i like to mold & cast in resin, make & customize various types of dolls, & build puppets; i do custom framed work, mixed media & textile stuff like sewing & embroidery; i paint in oil, acrylic, watercolor, gouache & water soluble graphite & i love ink, markers, crayons & whatever cheap & weird stuff i can get my hands on.

i have a particular affection for props, prop replicas & hypothetical in-universe items, & i like things that are handsome, durable & believable. i'm versatile & innovative, & i'm at my happiest when i'm exploring technical processes. i have quite a bit of knowledge about techniques & materials. i love a challenge!! currently all my sewing is done by hand, i have trouble controlling pedal-operated machines.

my favorite thing is horror coated in a fine layer of nostalgia & sprinkled with history. that seems highly specific, but you'd be surprised how many things fit the criteria. i tend to fixate on characters & concepts & do a lot of art about it - a habit i developed while i was re-teaching myself to draw after the changes to my eyesight. my output is largely therapeutic. sometimes people like it. maybe you will too!!

a good amount of my work is fanart & will be tagged as such/otherwise linked to the appropriate project, original work will be specified & have its own tag.

at the moment i make a lot of work related to the independent psychological horror unfiction project Welcome Home, created by ' partycoffin ' here on tumblr.

that's all for now!! 👁️‍🗨️📺

[epoxycom]

Installing Epoxy During Hot Installation Conditions

Installing epoxy at high temperatures can present several challenges, which can affect the performance and durability of the epoxy. Here are some common issues: Accelerated Curing High temperatures can cause the epoxy to cure much faster than intended. This can reduce the working time and make it difficult to properly mix and apply the epoxy before it begins to set. Bubbles and…

[lonestarbattleship]

December 3, 2023 Update from the Battleship Texas Foundation

Battleship Texas!

"DRY DOCK TOURS

Dry Dock Tours are scheduled until the end of January 2024. Discount available for those who return. For more information please visit: battleshiptexas.org/drydock

A Texas high school takes a Dry Dock Tour! We offer major discounts to any school group interested in a tour.

SHIP REPAIRS

The 1925 teak has been removed from the base of all 5”/51 cal. Guns. New wood will go down.

TORPEDO BLISTERS (COMPLETE) - The new torpedo blisters are a slightly different design and square off at the bottom below the waterline. This design change will make the new blisters easier to maintain increasing their longevity.

SANDBLASTING - The ship’s hull is now being sandblasted at night and inspected for holes and damage during the day. The necessary repairs are made before the final coating is applied.

Keel blocks have been fleeted to paint the ship.

PAINT - The black coating used is PPG SIGMA SHIELD 880 GF.

New primer on the ship’s hull.

Doublers being placed on the hull of Battleship Texas.

Primer has been painted on about 50% of Battleship Texas.

Primer has been painted on about 50% of Battleship Texas. Note the epoxy that has been added to some areas.

Doublers being placed on the hull of Battleship Texas.

HULL NUMBER - The new hull numbers have been extensively researched so each number is not only the correct font, but applied in the appropriate position it was in 1945. Welders have created an outline where that will be painted on in the future.

SHIP’S NAME APPLIED - The lettering for the ship’s name has been cut from steel plate and has been attached to both sides of the stern. A ton of work and research went into getting the correct font and positioning.

COATING - The inside of the blisters, and the ship’s hull will be coated to protect against possible corrosion.

TANK CLEANING - Tanks inside the ship are being inspected, cleaned, and repaired if need be. Some will be coated with a marine coating to help prevent future corrosion.

AFT FIRE CONTROL - New steel deck has been added to the levels of the tower. The doors on on both sides have also been added back. The space is being prepped for the windows and more to return the structure to how it looked in 1945.

Scaffolding covers the aft fire control on Battleship Texas.

A panoramic view looking aft from the aft fire control tower.

Trent and Collin show off the first prototype window for the tower. There are some changes that will be made before production starts.

The doors on each side of aft fire control are now on.

Dock hands explore the ship’s engine room.

Viewing the 240mm shell that hit Battleship Texas in 1944.

Live, Laugh, And Flood your Torpedo Blisters.

Visit our website at: battleshiptexas.org"

Posted on the Battleship Texas Foundation Group Facebook: link

[ezcatart]

☄️ YIIKCHAIN PREORDERS OPEN NOW! ☄️

these are 2.5 inch (6.35 cm) acrylic keychains and all 7 yiik party members are available! they have a glossy epoxy finish on one side, and each keychain comes with a color-coated metal clasp so you can attach it to anything. take a bite-sized alex yiik with you to work, to school, all around the world... 🌎👨🏼‍🦰

preorders are available on my ko-fi (see below ⬇️) and will be open until january 10th, 2024! i'm estimating they will be shipped in february 2024, details on that can be found in the product description on my shop.

adopt a little alex + co today for yourself or another yiikhead in your life 🫶🏻