#horizontal railing kit

[stair-warehouse]

Find horizontal railing kit at Stair WareHouse today!! We offer a broad selection of modern wood, iron, and stainless steel stair railing and staircase parts to upgrade the staircase section of your home. Order the best yet affordable horizontal stair railing kit today! For more information, you can call us on 800-591-7224.

[glowcircuit]

I built a miniature Va11 Hall-A Bar inside of my PC!!

Va11 Hall-A PC Parts & Build list

PC:

CPU : Intel I9 14900k

GPU: Intel Arc A770 16gb

Ram: Corsair Dominator 64gb 5600

Mobo: Maxsun Terminator Z790 D5 wifi

Hard drives M.2: Samsung 990 pro 2tb, Samsung 970 evo plus 1tb, CT 1tb,                                 Adata 500gb

PSU: ROG Thor 850 P2

Cables: Cablemod.com custom shortened and sleeved

Water loop distro : EKWB FLT 120 reservoir + D5 pump

Water loop cpu block: ThermalTake Pacific Mx2 Ultra 

Water loop radiators: Alphacool HPE 20 x 2

Water loop hardware: 15 Alphacool, 3 EKWB, 2 Alphacool soft, 2 granzon    

Water loop tubes: EKWB Acrylic tube 14mm, Alphacool 13/10 soft

Air Cooling : ThermalTake Toughfan 120mm x 3  + Controller

Air Cooling : Noctua 40mm pwm server fan x 2 (non visible)

Additional RGB Control : Coolermaster controller

Case:

Lian Li PC V600, left side mount, released in 2006, I acquired it in 2015 from PC Recycle in sodo Seattle.

I had to track down a new foot, one had been missing since I acquired the case (ebay)

Mods:These are the case mods I did personally

Cut a hole for the cpu mounts in the Motherboard mount plate as this case was designed for older hardware 

Cut two 120mm blowholes and added aluminum covers (Dremel)

Cut Front and rear windows into side panels (Dremel Max)

Moved PSU from vertical placement in the lower right side of the case in front of the CPU  to horizontal placement in the top left in old drive bays. 

The PSU bracket had to be cut to show the OLED on the side. 

Modded the side panel rail slide to accommodate the PSU, I used the original aluminum stand the psu was on, cut in half and epoxied with JB weld. 

Changed and moved Power/ Reset switch to the back of the case, shortened and spliced the cable

I cut and bent my own 14mm acrylic tubes (hobby miter, heat gun). 

Cut and made two way mirror for the front panel

Plastic "truss" is both functional and aesthetic. It came from a Gunpla accessory kit and has two cables passing through it and it acts as the GPU support. I could only get red and had to paint it.

Notice that some logos are missing/ covered, I dislike having a case as an advertisement. The Rog eye on the PSU is mostly covered but iykyk, most of the word "Intel" on the ARC GPU, Two of the Thermaltake logos on the fan edges, the Paint on the Thermaltake Mx2 Ultra and Maxsun terminator heatsink. (I will eventually cover the visible SSD with a heat sink, cover the fan info on the rear and work a cover for the word "dominator"). the one logo explicitly unchanged is the LianLi case badge, if I think of a perfect replacement, maybe then.

Mod I did not do:

I did NOT shorten and sleeve my own cables, I used cable-mod.com. I am not confident in my ability to do this.

BAR:

"Bar Tiny" Re-ment sets from Japan, 17 sets involved. 

 I customized the color of the bar and chairs and shortened one table for the mezzanine. The whole bar, minus barback- is on a removable 7 inch piece of black acrylic for cleaning.

Jill Stingray Nendoroid

Jils Cat, it sleeps on the GPU

Jill Stool: Jill is glued to a cute doll stool to see over the bar

Jill Accessories non-Nendoroid: cellphone, purse, coat (ebay)

Dorothy Haze Nendoroid

will be added on release.

Bar Back:I made this myself

Black acrylic sheet, and frosted acrylic rods.

Doll Light power kit: 8 Led lights, 4 incandescent lights

USB Doll light power strip

Other Bar Accessories:

Overhead Hanging farmhouse light

trash, mop, broom, pan, mop bucket, 

2 blue fuzzy chairs 

Miniature plants

Miniature Microphone

Mini bottle Dom Perignon, an xmas gift from my friend nemo, it's

 on the top shelf 

Problems and changes:

1. ARGB, pretty pretty pain in the ass. 4 pieces of software........

2. The water loop was changed extensively as hardware came in and space limitations were discovered. The biggest change is that I originally planned to have one radiator on the front of the case, the tubes running over Jills head and to light the tubes as lighting for the bar, to do this the fan would have been in the case proper pushing the whole bar to far into the mobo, it didn't work, so the loop was moved to the top of the case and caused me to have one complex bent tube 

 Second, I had planned the loop to use one sideport on the distro, but space limitation moved both ports to the top causing the complex fittings setup in that corner.   

3. The MOBO, sigh. This has been clearly the most challenging choice I made in this build, I really wanted it to work perfectly too, but I rolled those dice because: Aesthetic+function, the board I wanted (https://en.colorful.cn/en/home/product?mid=84&id=400d19bc-5655-49e1-b391-df00b60935ef) was to great a risk for the cost. This was a silver medal. 

I generally dislike the design options I had in the Z790 series of the big board makers (I  HATE big logos), especially the full ATX, there was one M that interested me, I should have picked it . This board has potential, but the BIOS is underdeveloped and compatibility has been problematic, I had to do a tricky outdated style BIOS update right from the box, and have had to reset the cmos a couple times. It skips BIOS on general boot and though stable, it will have to be addressed eventually, it doesn't have a proper sleep because of some issue between uefi & legacy. It may end up replaced, which will require a full build teardown.

the Turbo fan built into the board doesn't seem to function

Alos, the two argb connections on the mobo dont work, or I can't get them to recognize anything, necessitating the Coolermaster controller for the PSU and Distro. it is shoved behind the distro along with a Noctua 40mm

[reddrakebird]

You can't just vanish

The lights in that loft had been out for a half hour and there was no sign of anyone entering or leaving. Timothy did not expect it when Cassandra was gone, but Stephanie could come home anytime. He had to be quick, in and out before she came she saw him. Despite being in civilian clothing, the hoodie pulled up over his face to cover it from view as he ran towards the fire escape, jumped, and launched over the first-floor railing to land on the metal terrence. 

Steps were fast but light as he moved up higher to the top level before jumping over the side to briefly soar. Tennis shoes landed on the ledge, hand lowered to catch his balance against the brick before that form stood and walked carefully and quickly to the glass window. He remembered how to open it with only a few tools he always kept on him: the lock pick kit. Hands felt to see which glass would give. A device was pulled out of his back pocket, no bigger than a cell phone and clicked on. The scanner picked up their security system, gaining access with the password and codes given by Cassandra to turn them off before picking the lock so that glass swung horizontally. 

Pushing it halfway open, that form slipped in and jumped down to the living area. There was a pause in his crouch, the famous Robin pose keeping his head low as he listened to hear if anyone was home. Nothing that he could pick up. Now, where did Cassandra say that file was? Eyes adjusted enough to the darkness for him to navigate through when most of the items he remembered from hanging out here during the daytime. 

To the bed he knew was Cassandra’s, a hand reaching under the mattress before lifting it to ensure nothing was taped to the underside. Nope. It was lowered with care as he moved on. The arcade game boxes were checked next; a flick of his phone sent that small flashlight to glow so he could check the back of it quickly before turning it off so no one saw it outside the window. Pausing by its side, a hand rose so that thumb and forefinger could hold his chin in thought of where else she might have hidden it.

[thelistingteammiami]

DIY Projects To Give Your Backyard a Makeover

Whether you’re a home seller trying to attract a buyer or you’re a buyer who wants to make personal changes to the property, you can start today. Few home improvement tasks are as rewarding as giving the backyard a makeover.

These outdoor spaces are extensions of our homes, offering a space to relax, entertain, and enjoy the beauty of nature. The best part? You don’t need to be a professional contractor to transform your backyard into an oasis.

]

With a bit of creativity and effort, any homeowner can embark on a DIY adventure that will add value to their property and bring immense satisfaction. Let’s dive into some exciting DIY projects to give your backyard a makeover.

Building a Fire Pit or Outdoor Fireplace

There’s something magical about gathering around a fire. Building your own fire pit or outdoor fireplace can be a game-changer for your backyard! Choose a location away from structures—your home, fencing, toolshed, etc.—or overhanging branches.

To create a simple fire pit, you need to do little more than dig a shallow hole and line it with gravel or sand. Then, surround it with rocks, bricks, or pavers. If you’re feeling more ambitious and want an outdoor fireplace, consider buying a kit. It simplifies the construction process while allowing for customization in design.

A fire pit is one of the best DIY projects to give your backyard a makeover because of its usefulness throughout the year. Whether it’s a brisk fall evening or a cool summer night, around the fire pit is the perfect place to gather with friends and family.

Designing and Constructing a DIY Pergola

A pergola adds style and function to your backyard; it provides shade without completely blocking sunlight. Designing and constructing a DIY pergola might seem daunting, but it’s entirely achievable.

Start by selecting the location and measuring the area where your pergola will stand. Using quality materials, such as lumber, is essential for durability. Dig post holes, and set the main support beams in concrete for stability.

Once the concrete has set, attach horizontal beams across the top, securing them with metal brackets or screws. Consider growing climbing plants, like wisteria or jasmine, over your pergola. As they grow, they will create a beautiful, natural canopy.

Building Eye-Catching Deck Railings

Constructing deck railings can be a satisfying undertaking that goes beyond adding a functional element to your outdoor space. One of the most rewarding aspects of this project is the sense of accomplishment that comes from creating something with your own hands.

You can choose from many different materials. Wood railings offer a natural look, while metal delivers a more modern and eye-catching design. If you have the right tools for installing cable railings, you can bring an even more elegant and unique look to the yard, so let your creativity run wild!

Whether you are a seasoned DIYer or a novice looking to try your hand at carpentry, this project provides a manageable challenge. The construction methods vary depending on the railing material, and installation involves measuring, cutting, assembling, and finishing.

Now is the perfect time to roll up your sleeves and embark on your DIY adventure. Don’t wait any longer to create a paradise right in your backyard!

[indef1]

Everything You Need to Know About Crane Kits

Crane kits offer a cost-effective and customizable solution for businesses looking to implement overhead crane systems in their facilities. From manufacturing plants to warehouses, crane kits provide versatility and efficiency in lifting and moving heavy loads. In this blog post, we'll explore the various aspects of crane kits, including their components, benefits, applications, and considerations for selection.

Understanding Crane Kits:

Crane kits are pre-engineered packages that include all the necessary components for assembling and installing an overhead crane system. These kits typically consist of steel components, such as beams, rails, end trucks, hoists, and electrical components, along with detailed assembly instructions. Crane kits are available in various configurations and capacities to suit different lifting requirements and facility layouts.

Components of Crane Kits:

Bridge: The bridge consists of the main horizontal beam that spans the width of the facility. It supports the hoist and trolley assembly and provides a track for movement along the length of the crane system.

End Trucks: End trucks are mounted on either end of the bridge and house the wheels or rollers that enable horizontal movement along the crane runway.

Hoist: The hoist is the lifting mechanism that attaches to the trolley and is used to raise and lower loads. Depending on the application, hoists may be electric, manual, or pneumatic.

Trolley: The trolley is mounted on the bridge and travels along the length of the crane system, allowing the hoist to position loads precisely.

Electrical Components: Crane kits include electrical components such as festoon systems, pendant controls, and power supply systems for powering and controlling the crane.

Benefits of Crane Kits:

Cost-Effective: Crane kits offer a cost-effective alternative to custom-built crane systems, as they eliminate the need for costly engineering and design work.

Customizable: Crane kits can be customized to suit specific lifting requirements, facility layouts, and budget constraints.

Quick Installation: Pre-engineered crane kits come with detailed assembly instructions, making installation faster and more straightforward compared to custom-built crane systems.

Versatility: Crane kits are versatile and can be adapted to various applications, including manufacturing, warehousing, construction, and more.

Applications of Crane Kits:

Manufacturing: Crane kits are commonly used in manufacturing facilities for lifting and moving heavy materials, equipment, and products during production processes.

Warehousing: In warehouses and distribution centers, crane kits facilitate efficient loading and unloading of goods, as well as storage and retrieval operations.

Construction: Crane kits are valuable tools for construction projects, allowing contractors to lift and position materials, equipment, and prefabricated components at construction sites.

Considerations for Selection:

Lifting Capacity: Choose a crane kit with the appropriate lifting capacity to accommodate the heaviest loads you anticipate lifting.

Span and Height: Consider the span and height of the crane system to ensure compatibility with your facility's layout and lifting requirements.

Duty Cycle: Evaluate the frequency and intensity of crane usage to select a crane kit with the appropriate duty cycle rating.

Safety Features: Prioritize crane kits equipped with safety features such as overload protection, emergency stop buttons, and limit switches to ensure safe operation.

In conclusion, crane kits offer a cost-effective, customizable, and versatile solution for implementing overhead crane systems in various industrial and commercial settings. By understanding the components, benefits, applications, and considerations for selection, businesses can choose the right crane kit to meet their specific lifting needs and enhance productivity and efficiency in their operations.

[building-supplies-ipswich]

Metal Fencing Ipswich

The original material for fencing started with wrought iron, the original one. Today, however, there are cheaper options that are easier to install. Here's a rundown of your options.

Centuries ago, when only a few blacksmiths produced wrought-iron fencing, it was considered a sign of wealth and status. By the 1800s, more and more blacksmiths began producing it in the 1800s until wrought-iron fencing became more commonplace.

Contemporary Styles in Wrought-iron fencing

Today, it isn’t as rare or prohibitively expensive as it once was. But it still looks expensive, and that’s a big part of its appeal.

Most of today’s wrought-iron fencing, mainly made of steel or aluminum, comes from large factories. Other than chain link fencing, which is mostly utilitarian, decorative metal fencing Ipswich comes in shapes and styles that look nothing like wrought-iron.

Fence panels and posts

Today’s metal fencing comes in kits with fencing panels and posts. If you buy a kit, or one with spiked posts you drive into the ground, you can often do the installation yourself.

Whether you choose to DIY your fence or have it professionally installed, metal fencing deserves a closer look.

Metal fence - pro arguments

 Whether it’s painted cool metallic gray or jet black, or features clean lines or ornate curves, metal has an aesthetic appeal unmatched by any other fencing material.  Sellers use this as an important selling point. Here are the others.

Metal is one of the most durable of all fencing materials. Hollow steel fences last upwards of 20 years. Aluminum fences, as well as solid metal and iron ones, can last a lifetime.

Metal fences ae low-maintenance. Apart from periodic repainting to control rust, metal fences need no maintenance. They don’t stain or rot, and insects can’t hurt them.

Metal Fence - cons arguments

Metal fencing has two other drawbacks. The first one is that the any styles lack privacy.

Conventional metal fencing with pickets, balusters and semi-transparent panels are primarily for decoration.

Another argument is lack of security. Those lightweight aluminum fencing is more vulnerable to break-ins than wood or composites. The ones in solid steel and iron are less vulnerable, but more expensive.

Metal fence types

Metal fences are made mostly from aluminum, steel or iron. Usually, they feature a durable powder-coat finish to protect against rust.

Some metal fences are variations of traditional wrought-iron fences with pickets. There are many other variations of the other picket styles that are available.

There are straight pickets with a square cross-section ending with a spear, ball or fleur-de-lis. Another one features alternating pickets that form a loop over intermediate ones.

There are straight pickets terminating with two top rails that include design feature like circles and crosses.

There are also metal fences that features contemporary styles. They are probably more common than faux wrought iron. Included among them is the straight featureless balustrade extending between a top and bottom rail.

There are also privacy panels made from vertical or horizontal slats, to mimic the appearance of a wood fence and the corrugated metal panels, also used for privacy fencing.

The last one are metal panels or screens with laser-cut semi-transparent designs. There are some that gives the fencing a futuristic look.

[pictureangingrail]

Elevate Your Home Decor: The Art of Hanging Pictures Without Nails

Introduction: Decorating your home with pictures and artwork can instantly transform it into a personal sanctuary. However, the prospect of hammering nails into your walls may be daunting or impractical. Luckily, with the advent of innovative picture rail hanging system, picture hanging wire, and picture wall lights, you can achieve a stunning gallery wall without a single nail hole. In this blog, we'll explore the best way to hang pictures without nails, highlighting the use of it, picture hanging wire, and the added charm of picture wall lights.

The Power of Picture Rail Hanging Systems:

It is a game-changer when it comes to hanging pictures without nails. These systems consist of horizontal rails mounted on your walls, providing an elegant and damage-free way to display your art and photos.

Picture Hanging Wire:

Picture hanging wire is an essential component of the no-nail picture hanging process. It offers a secure and adjustable way to suspend your artwork from the picture rail. Opt for durable wire designed specifically for this purpose.

Picture Wall Lights:

Picture wall lights add an extra layer of sophistication to your gallery wall. These fixtures are designed to illuminate your artwork, enhancing its visual impact and creating a cozy ambiance in your space.

The Best Way to Hang Pictures Without Nails:

Here's a step-by-step guide to creating a beautiful picture gallery without nails:

Materials You'll Need:

Picture rail hanging system kit Picture hanging wire with hooks Picture wall lights Level Pencil Measuring tape Steps:

a. Prepare Your Art: Ensure your artwork has a wire securely attached to the back. Adjust the length of the wire to your desired hanging height.

b. Install the Picture Rail: Follow the manufacturer's instructions to install the picture rail on your wall. Use a level to ensure it's perfectly horizontal.

c. Attach it: Hook one end of the wire onto the picture rail hook or connector. Thread the other end through the hanging loop on your artwork and twist it securely.

d. Hang Your Art: Gently lift your artwork, align it with the rail, and hook the wire onto the rail's hook or connector. Adjust the height as needed.

e. Install Picture Wall Light: To showcase your artwork, install it above or below your pictures. These lights can be plugged in or hardwired, depending on your preference.

f. Final Adjustments: Step back and ensure your pictures are level and spaced appropriately. Make any necessary adjustments.

Benefits of Hanging Pictures Without Nails:

No damage to walls: Avoid unsightly nail holes and wall damage. Flexibility: Easily rearrange and add new artwork without the hassle of patching walls. Aesthetic appeal: Picture rail systems and wall lights add a touch of elegance to your decor. Conclusion: best way to hang pictures without nails is not only practical but also aesthetically pleasing. With picture rail hanging systems, picture hanging wire, and picture wall lights, you can create a beautiful and flexible gallery wall that showcases your art and personal style. Say goodbye to nail holes and hello to a stunning, damage-free display that elevates your home decor to new heights.

[richkomlkk]

Protect Your Network Equipment With a Wall Mount Rack Cabinet

Easily house equipment in room like wiring closets and conference rooms with a Wall Mount Rack Cabinet. They can help protect equipment from damage or theft with locks on the front, top, bottom and removable side panels.

Hinged wall mount cabinets allow easy access to back-door equipment and cabling during installation and maintenance. They also come with premium features like perforated doors and side panels to promote airflow and adjustable vertical mounting rails.

This wall mount rack cabinet can be installed on any flat surface, and it takes up less floor space than other cabinets. It is ideal for telecommunications, network equipment and IT installations. It can also be used for audiovisual production gear, music production equipment and scientific equipment. The wall mount rack is available in different depths and heights to suit various applications.

The 10U wall mount rack is an ideal solution for network, IT and computer storage. It can accommodate a variety of 19-inch equipment, including switches, patch panels and servers. Its vented front door and side panels provide excellent airflow to keep equipment cool. The side panels are also easy to open for convenient access to the equipment. It has a high load rating, and its smoked acrylic front door is lockable for security.

It features adjustable rack rails and numbered U positions, making it easy to install equipment. It also has a rear hinge to allow for easy access to the back of equipment. The bottom panel includes cutouts for cable routing, and it meets the enclosure requirements for PCI DSS compliance.

The SRW10US is designed to support wall-mounting and easy equipment access in IT network applications with limited space. Its ventilated front and side panels enable generous airflow to keep equipment cool, while the bottom panel has cutouts for cabling. It also has a recessed power strip and removable top and bottom cable panels for an organized workspace.

This wall-mount rack is suitable for any environment with limited space, especially small businesses and home offices. Its locking front door and sides protect equipment from tampering and dust, and it can be mounted in either vertical or horizontal orientation. It also has a vented rear to prevent overheating.

Whether in the office or an industrial work area, a wall mount rack cabinet is ideal for keeping equipment out of the way and making it easier to monitor. They’re also great for small offices or home-based businesses that don’t have the space for a full-sized server rack. Because these racks are mounted on the wall, they take up much less floor space than other types of network cabinets.

A vertical wall-mount rack can be used to store a variety of networking equipment like routers and switches, as well as patch panels. They come with adjustable vertical mounting rails that have square and 12-24 threaded mounting holes and numbered rack spaces to make setup easy. They may have vented front and side panels to assist with ventilation, and can support up to 140 lbs of equipment. Many include a bottom shelf to provide additional storage for items like cabling or projectors.

Some models are hinged to allow you to open the cabinet from both directions, which is ideal if your installation might be obstructed by something like a door. They also feature special channels for electric cabling to prevent messy wires from getting in the way of equipment and power outlets. They can be mounted to the wall or, with an optional SRCASTER rolling caster kit (sold separately), can be converted into a mobile rack.

Another type of wall-mount network rack is a cantilever rack shelf. These shelves are a good option for telecommunications installations in conference rooms or classrooms where floor space is limited and you need rear access to the equipment. The vented shelf plate helps to ensure consistent airflow to effectively dissipate heat on servers, while the top and bottom panels offer convenient cutouts for cable routing.

Keep your cabling organized and protected with this space-saving wall mount rack cabinet. This cabinet is perfect for SOHO, home offices, studios and other environments where space is at a premium. Its welded frame structure is made of heavy-duty cold-rolled steel, finished in a classic black electrostatic powder coat. It features a meshed front door and is vented to help keep equipment cool. The bottom has channels for cable routing, while the top and front doors lock securely to help prevent tampering or theft. This cabinet is easy to install, comes with casters for mobility and is ready for wall-mounting right out of the box.

This hinged wall-mount network cabinet is a great option for mounting EIA-standard 19" rack equipment in areas with limited floor space, such as networking wiring closets. It has adjustable vertical mounting rails with square holes to accommodate a variety of equipment and is rated for up to 250 lb. Its sturdy hinge between the cabinet and wall bracket allows it to swing away from the wall for rear access to equipment and cabling during installation and maintenance. The front, back and removable locking side panels protect your equipment from dust and moisture, while the reversible doors can open left or right to meet your needs.

When choosing a hinged wall mount rack, consider your equipment’s mounting depth, turning radius and weight capacity to ensure it can safely support the cabinet when fully opened. Also, make sure to reserve enough space on the turning side of the rack for your equipment’s cables when planning your setup. This will ensure your cables are long enough to reach the rear of your gear when the cabinet is fully open. If you need a higher weight capacity than this cabinet, see our other models.

[nqcart]

Kludi Rak RAK42005T Trio 4S 4-Speed Shower Set - Chrome

Kludi Rak RAK42005T Trio 4S 4-Speed Shower Set is a high-quality and stylish shower system that features a sleek chrome finish. It includes a hand shower, a shower hose, and a sliding rail for easy height adjustment.

One of the standout features of this shower set is its 4-speed function, which allows you to select from four different spray patterns depending on your preferences. The spray patterns include Rain, Massage, Champagne, and Mist, each of which provides a unique showering experience.

The hand shower is designed to be ergonomic and comfortable to hold, with an anti-slip grip that ensures a secure hold even when wet. The shower hose is made from high-quality materials and is designed to be flexible and kink-resistant for ease of use.

Overall, the Kludi Rak RAK42005T Trio 4S 4-Speed Shower Set is a versatile and stylish shower system that provides a high-quality showering experience with a range of useful features.

Features

Wall bar of 600mm

1600mm flex hose

Slider with horizontal & vertical adjustable bar with soap dish.

Includes fixing kit.

4S hand-held shower DN 15

Quick lime deposit cleaning system

Several Spray Modes 

Saturating spray/Misty spray/Massage spray/Saturating spray and Massage spray.

Logo flex hose, plastic coated with metal effect, and conical nuts.

1/2-inch x 1/2-inch x 1600 mm

[ecorusaus]

Creating an Urban Oasis With Eco R Us’s Vertical Garden Kits in Australia

Vertical gardens are a great way to bring life into any living space while adding a touch of sophistication and class. Plus, they don’t require much effort or energy, as all you need to do is set them up once and enjoy the vibrant colours for years to come. 

Eco R Us vertical garden kits are designed to be hassle-free as you don’t need any additional tools for assembly; everything you need comes with your kit. The self-watering system ensures that your plants remain healthy and lush without needing manual daily watering. We offer top-notch vertical gardens, planters and terrariums that are stylish, affordable and easy to maintain. Our products are made of high-quality materials that can withstand even the harshest weather conditions—sun, rain, wind or snow.

Experience Hassle-Free Gardening With Eco R Us Vertical Garden Kits

The vertical garden range from Eco R Us allows you to create an outdoor or indoor wall planter easily. You get the freedom to choose from a variety of sizes, shapes and designs according to your preferences and needs. All our products have been re-designed to hang off horizontal surfaces like walls, balconies or railings with utmost ease. These planters also come with different mounting options allowing flexible placement on any surface type imaginable!

Eco R Us offers more than just vertical garden kits in Australia; we also have a wide selection of accessories to design your customised oasis in the comfort of your home or office space. We have everything from plant stands, sunshades, and trellises to wheeled carts! With our comprehensive range of products and friendly customer service team, Eco R Us helps you create the perfect green escape wherever you go! Visit us at Ecorus.com.au for more information.

Source: https://justpaste.it/6dis9

[stair-warehouse]

Elevating Interior Design: The Allure of Horizontal Railings in Staircases

Interior design is a dynamic field where trends evolve over time. In recent years, the use of horizontal railings in staircases has emerged as a trend that captivates homeowners, architects, and interior designers. Horizontal railing kits introduce a fresh and modern twist to interior design, creating a unique aesthetic that continues to gain popularity.

The Aesthetic Appeal of Horizontal Railings

Horizontal railings, also known as cable railings or flat bar railings, provide a contemporary alternative to traditional vertical balusters and handrails. They are characterized by their sleek and minimalist design, often featuring thin bars or cables running horizontally between posts. This design choice offers several aesthetic advantages:

Openness and Space: Horizontal railings create a sense of openness, visually expanding the space and making it appear larger and more airy. This effect is particularly beneficial in smaller homes or confined spaces.

Clean Lines: The horizontal lines of these railings instill a sense of order and symmetry, which is especially appealing in modern and minimalist design schemes. They contribute to a clean and uncluttered appearance.

Modern Elegance: Horizontal railings exude a modern, sleek look that adds an air of elegance and sophistication to your home. This aesthetic can harmonize with various interior styles, ranging from contemporary to industrial.

Integration into Interior Staircases

Incorporating horizontal railings into your interior staircase involves several key design considerations:

Material Choice: Horizontal railings can be crafted from various materials, including steel, aluminium, glass, or wood. The choice of material should align with the overall design and aesthetic of your home.

Baluster Spacing: The spacing between the horizontal bars or cables is crucial. It must comply with safety codes and, from a design perspective, create a balanced and visually pleasing effect.

Handrail Design: The handrail can be seamlessly integrated into the horizontal railing system or stand out as a contrasting element. You can choose materials that either complement or contrast with the horizontal bars to add visual interest.

Impact on Home Aesthetics

The incorporation of horizontal railing kits in interior staircases can profoundly impact your home's aesthetics:

Modern Sophistication: Horizontal railings can instantly transform a traditional staircase into a contemporary masterpiece. They introduce an element of surprise and flair to your interior, exuding modern sophistication.

Personalization: These railings offer a high degree of customization. You can select materials, finishes, and designs that align with your personal style and the overall look of your home.

Enhanced Resale Value: Homes with unique and aesthetically pleasing features often command higher resale values. Horizontal railings can make your property stand out in a competitive real estate market.

Conclusion

Best Horizontal railing kits have gained popularity among homeowners looking to infuse modern elegance and sophistication into their living spaces. Their clean lines, open design, and customization options make them a versatile addition to various interior styles. Whether you're aiming for a sleek contemporary look or seeking to enhance your home's resale value, horizontal railings offer a compelling solution for elevating your interior design.

[home-vacuum]

Rail sewing machine

One of the devices that has become one of the most popular devices in the world of packaging due to its high speed and the ability to simultaneously print date and price, is the rail sewing machine. In this article, in addition to learning about the applications and how to use the rail sewing machine, you will also learn about the features, advantages and disadvantages of this machine. Rail sewing machine The rail sewing machine is one of the most widely used machines used in the industry for packaging all kinds of products and goods. This machine has the ability to sew all kinds of plastic films. Another feature of rail sewing machines is that they can be connected to a counter and can count the number of sewn files. The price of the rail sewing machine is not that high compared to the unique service it provides. In the following, we will examine this feature.

Features of the rail sewing machine The rail sewing machine has special features that include: • Ability to adjust the temperature of the device • Ability to adjust the speed of the device • Ability to print date and price with very high resolution and quality • High drying speed of the date printed on the product • Ability to print dates and specifications with different colors on products • Economic price. Rail sewing machine has a much lower price than other packaging machines, and packaging products with this machine is very affordable. • Ability to bear the weight of heavy products

Application of rail sewing machine The rail sewing machine has brought about many changes in the packaging industry. Proper packaging of different products ensures that the quality and health of the products are maintained and the products reach the consumer in perfect health. The rail sewing machine can be used for packing all kinds of parts, powder materials (such as spices), sugar, bread, dry cake and pastry products, chemical and electronic materials.

The rail sewing machine is mostly used in the following industries:

Food industry and edible products

Pharmaceutical industries and chemical products

Household product packaging industries

Types of rail sewing machines There are different types of rail sewing machine and every person can find and buy the desired machine according to the price of the machine and the required facilities and equipment. In general, rail sewing machine is divided into two categories: horizontal rail sewing machine and vertical rail sewing machine. Horizontal rail sewing machine The price of the horizontal rail sewing machine is lower than other models and it is one of the most affordable sewing machines in the market. This machine has the ability to sew horizontally as well as vertically. Sewing using this machine is done at a high speed and is very clean and elegant. One of the disadvantages of the horizontal rail sewing machine is that it cannot be very fast in packing liquid and powder products. The reason for the slowness of the machine is that the operator needs more time to pack these products and must pack more carefully. This machine is mostly used for solid and dry products and has much better speed and performance in packing these products. Vertical rail sewing machine The price of the vertical rail sewing machine is higher than other sewing machines. This device is equipped with a height adjustment kit and it is possible to place products standing and vertically on this device. To sew packaging using a vertical rail sewing machine, it is enough to place the product vertically on the machine and sew them. The vertical rail sewing machine is very suitable for packaging and sewing products that are in liquid or powder form. For example, suppose spices, pickles or olives are to be packed in one of the packaging industries. These products cannot be packed horizontally. As a result, the packaging of these products is only possible using a vertical rail sewing machine.

[mommytitta]

Aqua illuminations hydra 52

#AQUA ILLUMINATIONS HYDRA 52 FULL#

With their parent/child relationship and wireless. With their easy to use app for IOS, Android or any other internet connected device you can have the ability to control your light from anywhere their is internet access. The HMS features a slim profile with integrated cord management to minimize visual clutter and complement the clean look of your Hydra fixtures. HYDRA 52 HD LED Aqua Illumination has always been known for producing easy to use, attractive and functional LED lights. Slide and swivel your lights to exactly where you want them, then fasten them in place to best illuminate your livestock. AquaIllumination Hydra 32 HD LED Reef Light (Black Body) 4.4 out of 5 stars.

#AQUA ILLUMINATIONS HYDRA 52 FULL#

Width, height, and even the angle of the light is able to be fine-tuned. SMATFARM LED Aquarium Light - Updated Program Coral Reef Light Dimmable 95Watts (5) Full Spectrum Sunrise Sunset for Marine Fish Tanks Coral Reef Lamp with Timer Function. Alternatively you can create a custom multilight hanging solution with a rail (b) the correct type and number of mounts (c) and a HMS hanging kit (a). For tank mounting simply combine an arm kit (a) with the appropriate rail (b) and the correct number and type of mounts (c). Brackets allows you to mount one Hydra TwentySix or TwentySix HD to the HMS Rail (sold. The newest innovation in the Hydra line, the Hydra HD Series brings more power and colour. Aqua Illumination AI HMS Bracket for Hydra 52/64HD. Multi light mounting employs a modular approach. Aqua Illumination Hydra 52 HD Unleash Your Tanks Full Potential. The HMS features a slim profile with integrated cord management to minimize visual clutter and complement the clean look of your Hydra fixtures. The HMS allows for vertical, horizontal, and rotational adjustment. The Hydra Mounting System (HMS) is specifically designed to provide an easy to use, highly effective adjustable tank mount solution for Hydra TwentySix, FiftyTwo and Hydra HD model lights. The Hydra Mounting System (HMS) is designed to provide an easy to use, adjustable tank mount solution for the Hydra TwentySix, Hydra FiftyTwo and Hydra HD LEDs.

[justcss]

Crossbow tripod

#Crossbow tripod professional#

#Crossbow tripod free#

#Crossbow tripod windows#

#Crossbow tripod windows#

While hunting in Texas last fall, shooting a crossbow after shoulder surgery, I occupied a hard blind set on an elevated platform and holding horizontal windows that provided bench-rest stability.

NOTE: Keep in locked position at all times to assure yoke or optics are secure. Tripod stands and hard-side ground or tower blinds are also crossbow ready.

New Heavy Duty look with Dark Earth Accents.

Backbone Strengthened Rotating Joint for Smooth Panning.

New Quick Detach Yoke System with Integrated Lock.

Ability to support a variety of different crossbows.

And youll get a more stable, accurate shot.

Specifically designed for the crossbow hunting/shooting market Gen 3 Crossbow shooting sticks have a smooth panning action to help you find your perfect shot at any angle.

THE ONLY SHOOTING STICK WITH A QUICK AND EASY ONE-HAND ADJUSTMENTS. The Crossbow Trigger Stick® Gen 3 is the ultimate solution for making your shot accurate no matter where you are. the 3CCD Hi8 video camera and tripod, the fivehundredwatt pinspots and. Use it with the Trigger Stick Gen 3 Optics/Accessory mount for quick and easy detaching on the hunt or at the range. had hunted field mice with a crossbow in the remote mountains of Nagano. The widened V-Yoke gives you quick and stable support to keep your shot steady and accurate. The smooth panning action helps you rotate, scan and find your perfect shot effortlessly. The Crossbow Trigger Stick® Gen 3 is the ultimate solution for making your shot accurate no matter where you are or what you are shooting. The legs are also adjustable in height and are fitted with rubber feet to prevent scratching.The Crossbow Trigger Stick Gen 3 shooting sticks are engineered to support a wide variety of crossbows and rifles. The Crossbow Trigger Stick Gen 3 shooting sticks are engineered to support a wide variety of crossbow models and makes. The Final Rest can easily accommodate most guns.A crossbow can be a tack driving machine, but keeping the crossbow stable can be difficult. The final rest shooting system works great for crossbow hunters and gun hunters. This bipod is entirely made of metal and is easily foldable. The tripod and the shooting rest can easily fit in a backpack so hunters on the go can quickly pack and unpack the system.

#Crossbow tripod professional#

Outstanding product, Excellent response from Midway USA, price and shipping. This bipod is suitable for almost all professional crossbows because it can be mounted on either a lower rail or a swivel stud mount. Set up in a ground blind in Missouri opening day 2020 firearms season, had the shooting sticks ready, easy to use and move around in the blind ,steady mount, made a successful shot on a buck at 100 yards. The DeathGrip UltraLite mounts to any Arca-Swiss Tripod head with.

#Crossbow tripod free#

All Orders Ship FREE in the continental U.S.A. An infantryman armed with an arquebus is called an. Gen3 Crossbow Tall TriPod (1) Get Free Shipping. Features : DIMENSIONS: 20 40 of height adjustment and weighs 1.64 lbs. This lower rail comes with a new swivel stud mount, so you can still use your sling. From 46.17 - Ameristep has given hunters for over 20 years: ground blinds & accessories that cleverly conceal positions from up above and down below. Comments about Primos Gen 3 Trigger Stick Crossbow Tripod 24' to 62' Ground Swat Camo. An arquebus is a form of long gun that appeared in Europe and the Ottoman Empire during the 15th century. BOG Havoc Camo Tripod Shooting Rest with Lightweight Aluminum Construction, High Density Foam Grips, Twist-Style Lock Legs, and Universal Shooting Rest Head for Hunting, Shooting, and Outdoors. A kit is provided to convert the swivel stud mount to a lower rail. This bipod is suitable for almost all professional crossbows because it can be mounted on either a lower rail or a swivel stud mount. The lightweight aluminum legs use twist locks to adjust height independently height adjustment is 20 inches to 40 inches, so this bipod is ideal for sitting butt on the ground. If you let it rest on a chair for example, it can easily wobble back and forth. The Bog Havoc Bipod (MSRP: 49.99) features a Universal Shooting Rest (USR) yoke that swivels 360 degrees, and it has rubber padding that holds a crossbow solidly. With this bipod you can keep your crossbow stable while aiming. The UTG crossbow bipod is an essential accessory for any professional crossbow shooter.

[skyfire85]

FLIGHTLINE: 195 - SNECMA COLÉOPTÈRE ("BEETLE")

-The SNECMA Coléoptère on its specially designed cradle/erector. | Photo: USN

FLIGHTLINE: 195 - SNECMA COLÉOPTÈRE ("BEETLE")

Designed by French engine manufacturer SNECMA, the Coléoptère was an experimental VTOL aircraft using an annular wing.

In the wake of WWII, a number of aircraft design and manufacturing organizations around the world sought to create an aircraft capable of taking off and landing vertically (VTOL), using a number of cutting edge technologies, including turbojet engines. One such company was SNECMA (Société nationale d'études et de construction de moteurs d'aviation , now Safran Aircraft Engines), which along with its own R&D work, integrated the research of Austrian-born Helmut von Zborowski, who had designed an annular wing he felt was capable of acting "as power plant, airframe of a flying wing aircraft and drag-reducing housing". SNECMA began design work of an aircraft incorporating von Zborowski's wing with their own jet engines into a ramjet interceptor, capable of taking off vertically and accelerating to supersonic speeds. This work culminated in the C.450 Coléoptère. Prior to building the Coléoptère, however, a number of test vehicles were built, known as the Atar Volant (either "Shuttlecock" or "Flying Atar").

-The second Atar Volant (C.400 P.2), on display at the Musée de l'air et de l'espace in Le Bourget, France. | Photo: ignis

Essentially an Atar 10DV engine with a metal skin providing space for fuel and remote control equipment, the first Volant, model C.400 P.1, had its first tethered flight on 22 September 1956 and completed 205 flights to validate control systems, which included an early thrust vectoring nozzle.

-Cutaway of the P.1. | Illustration: SNECMA

-Photo of the P.2 (L) and P.1 (R) in the late 1950s. | Photo: Nico Braas

The P.1 was followed by the P.2, which was also powered by a 10DV, but had a platform above the intake for an ejection seat and controls, allowing a pilot to fly the Volant. The P.2 supplemented the nozzle control of the P.1 with control jet nozzles on the landing legs. a 500kg capacity fuel tank gave an endurance of almost 5 minutes. The first tethered flight was on 8 April 1957, with the first free flight on 14 May 1957. The P.2 made 102 flights by 1958, after which it was displayed at the Paris Air Show before being preserved at the Museum of Air and Space in La Bourget. A third Volant, the P.3, used a more powerful 101E engine, and had a fully-enclosed cockpit atop the stack, which also had a tilting ejection seat for both vertical and horizontal flight.

-The C.400 P.3 during an early tethered flight. | Photo: SNECMA

The P.3 was used in two separate phases, one testing vertical flight, then a second stage with the engine mounted in a horizontal position on a rail car to test airflow and other aspects of horizontal flight.

-The P.3 being prepped for a horizontal test. | Photo: SNECMA

THE BEETLE

After the conclusion of the Volant test series, SNECMA proceeded with the construction and testing of the full annular wing aircraft, designated the C.450-01 Coléoptère. Lacking the needed experience with manufacturing a full airframe, SNECMA contracted Nord Aviation to complete the Coléoptère, with the aircraft being ready for its maiden flight in 1959.

-Orthograph of the C.450-01. | Illustration: aviastar.org

The C.450 stood eight meters tall on four small swiveling caster wheels, and while the diameter of the wing was just over three meters, four small fins for maneuvering in horizontal flight increased the 'wingspan' to 4.5 meters from tip to tip. At maximum weight the Coléoptère weighed 3,000 kilos, while the Atar EV 101E engine produced 3,700kg of thrust. An annular tank provided 700kg of fuel. Two small retractable canards on either side of the nose aided with stability during the transition from vertical to horizontal flight, while deflection of the exhaust provided directional control during vertical flight. As with the P.3 test rig, the seat and instrument panel tilted with the aircraft, keeping the pilot relatively upright in all phases. Two windows were added to the fuselage to give the pilot a frame of reference for the ground during landing and takeoff, and auxiliary doors would open to direct air into the engine as needed.

-The C.450 resting in the transporter/erector, with pilot Auguste Morel in the pilot's seat. | Photo: SNECMA

The C.450 arrived at Melun Villaroche Aerodrome for testing in 1958, with the first tethered test occurring in December. Test pilot Auguste Morel, who had also flown the Volant during its test phase, found almost immediately that the Coléoptère had a tendency to slowly rotate during hover (likely a result of torque from the engine), that the vertical speed indicator was inaccurate, and that the control system was almost ineffective during vertical flight. Dead stick (i.e.: engine off) landings were impossible. Adjustments were made to the aircraft, and the first free flight was undertaken on 6 May 1959. Seven more successful test flights were completed, with the aircraft demonstrating its ability to hover before a public audience. The C.450 established a maximum ceiling of 800m (2,600 feet).

-The Coléoptère in a hover. | Photo: SNECMA

The ninth and final flight occurred on 25 July 1959, and was intended to be the first full transition from vertical to horizontal flight. Poor instrumentation and a lack of visual references resulted in Morel becoming disorientated however, and the Coléoptère began to stall. The aircraft entered a series of oscillations and Morel triggered the ejection seat at 150m (490') altitude. The C.450 impacted the ground and was destroyed, and Morel was injured but survived. SNECMA had planned on having a second Coléoptère built, but the funds were never provided, and the test program ended with the 450.1's destruction. SNECMA's brief entry into experimental aircraft ended as well, though the company continued to innovate within that field, working with Rolls-Royce on the Olympus 593 engine for Concorde as well as with GE on several airliner engines, and developing the SNECMA M53 for the Mirage 2000 as well as the M88 for the Rafale fighters. The company also branched out into rocket engines, developing the Viking and Vulcain motors for the Ariane series of launch vehicles. In 2016, after a series of acquisitions and mergers, the company was renamed Safran Aircraft Engines as a subsidiary of Safran S.A.

-Box art for a contemporary model kit of the Coléoptère, released by French company Heller. | Illustration Heller SA

[lifeofkaze]

When Stars Ignite - Chapter 11

HPHM Rockstar AU

A/N: As always, the lovely KC (only in mention) belongs to the beautiful @kc-and-oc . Thank you for everyone holding my blushing little hand through this and listening to me whine about it. Also thank you for all the ones providing me with research information 👀. You know who you are! 💛

General Warning: This whole fic has a general warning of being NSFW / 18+. We will give specific warnings for every chapter in itself, but several adult themes will be more or less present in every chapter, may it be explicitly or in mention. These include sexual topics, drug abuse, (ab)use of alcohol, smoking and a whole lot of cursing.

Specific Warning: Langague, depiction of alcohol consumption, depiction of drug abuse, graphic depiction of explicit NSFW content - do NOT read if under the age of 18!

~~~

Find the masterpost here, the previous chapter here and the next one here. The songs featured before every chapter can be found on this pretty badass playlist here.

~~~

This work is a collaboration with @the-al-chemist

Taglist: @slytherindisaster @night-rhea @carewyncromwell

And we were trying different things

We were smoking funny things

Making love out by the lake to our favorite song

Sipping whiskey out the bottle, not thinking 'bout tomorrow

Singing Sweet home Alabama all summer long

~ Kid Rock - All Summer Long ~

~ 10 months prior ~

It had been an unusually hot day, even for the middle of August. The heat hazes over the scalding hot streets were omnipresent, and people everywhere were trying to find some relief from the burning sun.

Lizzie loved every second of it.

She didn’t mind the high temperatures at all and relished the warmth on her skin as she stepped outside the old house in Kensington. It belonged to Ethan Parkin and Equinox had been keeping their rehearsal rooms in his converted cellar ever since Lizzie could remember.

They had just finished a long day of putting together the last details for their upcoming European tour. It had taken them all day until everyone had been satisfied with the results. Finally outside again, Lizzie intended to make the most out of the remaining hours of daylight.

It had suited her just fine when Orion had mentioned the poetry slam happening just around the corner of where he was living. He had invited all of them to come, but all except Lizzie had already made plans for the evening. Skye had wanted to come as well, but after receiving a text, she had abruptly changed her mind again.

So now it was only the two of them riding on the West Kensington tube station towards Gloucester Road. Orion was casually carrying a huge bag containing one of his guitars over his shoulder.

“Why are you taking that with you?” Lizzie asked him curiously. “You usually keep them in the rehearsal room.”

“Everything has its time, may it be little or large. The time of the strings on this guitar are almost over; I need to replace them,” Orion said. “I don’t have any suitable ones at the rehearsal room though. I’ll just drop the guitar off at home and we’ll be on our way again.”

They had just hopped onto the Circle Line that would take them to Notting Hill; Orion watched her from across his seat. “Why do you look so surprised?”

Lizzie tilted her head to one side. “In all these years, none of us has ever been at your place before. Except for Merula, of course,” she added matter-of-factly.

They were about to reach Notting Hill Gate and Orion motioned for her to get up. “Then it’s about time.”

They had to walk a bit from the tube station to the house where Orion was living. Although it took them about fifteen minutes to get there, Lizzie didn’t even notice. They passed through bustling streets, several of them lined with market stalls selling food and curious little trinkets. The colourful terraces and fronts that made Nottinghill so famous brightened Lizzie’s mood even further.

She and Orion were talking about all kinds of things, the band, the tour, the fact that Lizzie had never been to a poetry slam before; something, Orion told her, they would definitely need to change.

When they arrived at their destination, Lizzie dipped her head back and looked up at the brightly painted front of the old house. It was bigger than the ones surrounding it and Lizzie presumed it was made up of several flats.

“Are you coming?” Orion called over to her; he was waiting in the doorway, holding the door open for her.

Lizzie smiled as she followed him into the cool darkness of the stairwell. “I just thought this place fits you.”

He laughed softly as he climbed the stairs behind her. “What makes you think that?”

“It’s a mix of so many different things,” Lizzie explained, “traditional, but also free-spirited and unconventional, old-fashioned and modern at the same time; just like you.”

She heard Orion laugh again. “Well, if you think so.”

They walked right to the top floor, where two dark blue doors branched off the landing. Orion unlocked the one on the left and stepped aside to let her enter his flat first.

Lizzie found herself standing in one huge, sun-filled room; her eyes were immediately drawn to the big skylights in the bare brick walls through which the light was filtering in. It was a lot tidier than she would have expected from someone with as much creative energy as Orion. But even though the furniture was pretty minimalistic, the room seemed to breathe Orion’s energy.

Everywhere she looked Lizzie could see something that was so inherently him; a half-finished travel book on India, a bowl full of colourful crystals, a small dreamcatcher hanging over his bed in the far corner of the room. Almost every free surface was occupied by plants of all forms and sizes; they added a pleasant pop of colour to the otherwise neutral toned place.

Everything Orion needed on a daily basis seemed to be in the room Lizzie was standing in right now; the only thing she was surprised to notice was the total lack of anything to do with music. While she kept her main drum kit at their rehearsal room when they weren’t on tour, she had a smaller one over at her own place, as well as some other percussion and a guitar for when she felt like a change.

Her unasked question was answered when Orion walked past her into an adjacent room Lizzie hadn’t noticed before, his guitar still strung over his shoulder. Curious, she followed behind and had to chuckle when she saw the reason why there were no traces of Orion’s love for music in the main room.

The whole second room of his flat had been turned into some kind of home studio. All of their awards and golden records were hung on the walls, alternating with several old guitars. All of them seemed to be in pristine condition.

On Lizzie’s left side was a huge table that was littered with notebooks, plectrums and a simple switchboard she assumed Orion used for recordings. What piqued her interest was located on the other side of the room, however; all the instruments featured in their band were set up there, including a worn looking, blue drum kit, almost similar to the one she had at home for practising.

Lizzie smiled and stepped closer to it as Orion deposited his guitar on the worktable. She ran her hand over the floor tom, one of the horizontally mounted drums. Something about it felt oddly familiar.

“Do you remember it?”

Lizzie looked up from the drums and saw Orion leaning against the doorframe, watching her. “You should, it’s the one you used on our first tour. The label let me have it for practically nothing.”

The memory made her smile and she tapped her fingers against the slightly worn drum head in a quick, alternating rhythm. “Why am I not surprised at all that you’re using half of your place for making music?”

He mirrored her smile. “Passion is like a living thing, it needs room to breathe and be free if it wants to thrive. Did you think I made up all the instrument parts for our songs only in my head?”

Lizzie picked up one of the drumsticks and flipped it, laughing as she caught it again. “And your neighbours are okay with you running your one-man band up here?”

“So far, no one has complained,” Orion grinned before pushing himself off the wall. He motioned to her to follow him. “Come on, the studio’s great but I want to show you the best part of this place.”

She followed him back into the other room, where he led her to one of the huge skylights. Lizzie noticed the steep, rickety looking steps beneath it. Orion reached up and undid the latch before quickly climbing upwards and vanishing through the window.

When she didn’t follow immediately, his head popped back into view. “What’s wrong?”

Lizzie eyed the steps sceptically. “These don't look really trustworthy.”

Orion laughed and extended his hand to her. “Don’t you trust me?” His eyes twinkled with amusement. “Or are you scared?”

“As if,” Lizzie snorted indignantly and climbed up after him, completely ignoring his offer for help.

Her momentary flare of stubborness died as quickly as it had come when she stepped past Orion and out onto a beautiful terrace, set back into the roof of the building. It wasn’t a particularly large space, but it was more than enough for a sunchair, a set of lounge chairs and a table. A huge parasol protected the area from the sun, but even so it was burning hot up here. The ground was laid with wooden floorboards and several chains of fairy lights and small lampions were fixed to the walls or wound about the railing of the sunshade.

Not one to be intimidated by the heat, Lizzie walked over to the wrought iron railing and leaned over it, admiring the breathtaking view stretching out in front of her. The skyline of London was glittering in the sunlight and she could make out the sea of green that was Kensington Gardens.

“Wow,” she breathed, “the view is fantastic.”

She heard Orion chuckle from somewhere behind her. “It is.”

Lizzie’s eyes fell to the many plant pots lining the length of the terrace. Like the plants inside, they added something peaceful to the atmosphere; she had never known Orion was so into gardening.

She ran her finger over the leaves of one of them. “Who’s taking care of these when we’re on tour?”

“My neighbour,” Orion answered, “she knows her way around plants. She is teaching botany at Queen Mary University.”

Lizzie had spotted a very familiar looking specimen with distinctly pinnate leaves. She turned to Orion with a grin. “And your professor neighbour is alright with watering this illegal little fellow here?”

Orion laughed. “She’s very liberal on the matter, really. Where do you think I got it from?”

“All for scientific reasons, I presume.”

“It does open the mind to a new level of creativity,” Orion shrugged, making Lizzie laugh out loud.

“That sounds so much like you. No wonder I don’t get the lyrics half the time.”

Lizzie stepped back from the railing and wandered over to the sunchair. The heated surface bit into the bare skin of her legs as she lounged into it, but she enjoyed the warmth as soon as the initial pain subsided.

“I can definitely see why this is your favourite place,” she sighed, “I could just stay here all day.”

“The poetry slam doesn’t start for another hour,” Orion said, “and it’s not far from here, so we don’t have to go just yet. Do you want a drink or something?”

Lizzie turned her head and shaded her eyes with her hand. “I like the sound of that.”

***

One glass of ice cold white wine turned into two, and then turned into a number Lizzie couldn’t possibly remember anymore. The sun had long gone down and the poetry slam had started ages ago, but they were still sitting on Orion’s rooftop terrace with no intention of going anywhere anytime soon.

With the sun gone, the air had grown cooler; the floor and walls were heated by the day’s sun, but Lizzie had found herself hugging her bare knees, shivering just a little. Orion had gone back inside to bring her something to keep her warm; he had come back with a plain black hoodie that she had gratefully accepted. Orion was much taller than Lizzie was, however and so the sweater hung loose around her shoulders and went down past beneath her hips. Lizzie had to roll up the sleeves several times until her hands were free again, but she was glad for the extra warmth it provided.

It didn’t surprise her that Orion didn’t grow the weed plant out of sheer botanical interest; accompanying the wine, they were sharing a joint with a mixture he had created himself. Lizzie couldn’t tell if she was primarily drunk or high at this point, the only thing she knew was that she had never in her life seen anything so fascinating as the fairy lights reflected in her wine glass.

“Like teeny tiny fireflies,” she giggled as she twirled the glass between her fingers, delighted by the way the light sparkled in the cold drink.

“I think you’ve caught a bit too much,” Orion chuckled but handed her the joint back anyway. Although he had been wearing a very detached grin on his face for the last half an hour or so, he wasn’t nearly as giddy as Lizzie; but then again, he was probably much more used to smoking than she was.

“And besides,” he continued, holding his own glass up against the lights, “they’re clearly little stars; how can you not see that?” His face grew pensive. “A whole, tiny wine glass galaxy.”

“You’ve no idea what you’re talking about,” Lizzie declared firmly. She lounged deeper into her armchair and took a deep drag. She dipped her head back and slowly blew the smoke into the air; the way it made the lights hazy was really pretty. “And it’s called a teacup galaxy.”

“Aren’t we all galaxies in our own teacups, in one way or another?”

Lizzie hummed in response. “In that case, I’d actually prefer the wine glass.”

She closed her eyes and let the sensation of the cushions in her back envelope her for a moment. From somewhere in the neighbourhood music was drifting up to them; from what she could hear, it sounded tropical, Caribbean maybe. Her thoughts being deliciously hazy, Lizzie could just imagine not being on a rooftop in London, but on a beautiful beach somewhere far, far away.

She smiled to herself; there could be worse company on a tropical island than Orion. The smile turned into a smirk as she thought about the many different tattoos she knew were decorating his well-toned upper body; she could most definitely imagine having worse company.

Indulging the idea of lounging in the warm sand with a drink and the rushing of the waves in the air a few moments longer, a sudden thought struck her and she sat upright.

“I just had the most brilliant idea.”

Surprised by her unexpected outburst of energy, Orion almost dropped his glass. “I told you smoking broadens the mind,” he said after regaining his composure. “What is it?”

“We should so change our tour display. It’s boring.”

A mixture of intrigue and scepticism showing on his features, Orion tilted his head. “So your suggestion would be?”

Excited by her flash of genius, Lizzie placed her now empty glass on the table between them and leaned forward. “Two words: steel drums.”

Orion didn’t say anything for a moment, a crease forming on his forehead. Then, he broke into a dazzling smile. “That must be the best idea you’ve ever had.”

“I know, right? But it gets even better.”

“How could it get better than steel drums? More steel drums?”

Lizzie contemplated that possibility for a moment but discarded it quickly. “No, I don’t think so.” Her eyes lit up as she thought about her idea. “But you and Ev could totally play ukulele.”

Orion sighed. “Totally.”

A thought seemed to cross his mind. “But I’m not sure Ev can play the ukulele.”

Lizzie was dismayed by this. “I thought if you can play the guitar you can automatically play the ukulele.”

“If you want to call what Ev does playing.”

She had to snort with laughter at Orion’s dry tone. “We’ll just replace him with KC, she’s the prettier one anyway.” The thought of KC performing a hula dance on stage had her laugh even harder.

“There’s a problem though,” Orion broke her out of her entertaining thoughts.

“What’s that?”

“You can’t play the steel drums.”

“Who says that I can’t?”

“Well, can you?”

“I can learn,” Lizzie replied stubbornly. “How hard can that be? You only have one steel drum and I have... “ She frowned as she was trying and failing to envision her drum kit in her head. “How many drums do I have? I can’t remember.”

“More than one, in any case,” Orion laughed and extended his hand towards her empty glass. “You go think about that, and I’ll get you a refill.”

Lizzie was quicker though, snatching the glass out of his reach and getting up. “Don’t worry, I can go myself.”

She walked towards the skylight leading back into the flat but had underestimated the effect of both the drugs and the alcohol on her body. Shaking her head a little, Lizzie took a moment to steady herself.

Just when she thought she had found her balance again, her foot caught in the wire of one of the fairy lights. She stumbled forward with a jolt, ripping the plug right out of its socket and plunging a good portion of the rooftop into darkness.

Luckily for her, Orion didn’t feel the effects of their smoke as much as she did. His reaction time was still quick enough to catch her before she could hit the ground. She could hear the breath leaving his lungs as she collided with his chest; at least he was softer than the floorboards would have been.

He laughed as she straightened up again. “Careful, drummer girl, that was close.”

Lizzie tilted her head as she looked up at him curiously. “You’re close.”

Only now realising their position, Orion mumbled an apology and started to move away from her but Lizzie was quicker. She had already scrambled up onto the seat next to him, still feeling a little dizzy. Her feet were resting on the arm of the lounge chair, her legs lying draped across Orion’s thighs.

“No, it’s alright,” she giggled and leaned against him, “you’re more comfortable than my chair anyway.”

Leaning towards the table to retrieve Orion’s glass, Lizzie’ head started spinning again and she had to grip his shoulder for support. She was glad when she felt Orion’s arm come around her back for added support.

“And besides,” she held the glass up triumphantly before bringing it to her lips, “that way, it’s easier to share this.”

They were sitting like that for a while, Lizzie leaning against Orion’s chest, her head nestled into the crook of his neck, while he had his arms around her. The music she had been hearing earlier was still playing, faintly carrying up towards them. Lizzie had her eyes closed, alternating between listening to the upbeat melody and the calm rhythm of Orion’s heartbeat.

Now that she was relaxing, she became increasingly aware of the combined effects of the many glasses of wine and the spliff they had relit again. She felt as if she was floating through a haze on the soft sound of the steel drums, as if she could fly right into the night sky until she was surrounded by a glittering sea of stars.

The only thing anchoring her was Orion, the steady rising and falling of his chest, the ends of his hair brushing against her cheek when he moved, the touch of his fingers against hers when he handed her back the wine they were sharing.

Her head was spinning and she hooked her finger underneath one of Orion’s woven bracelets, as if the physical holding on to him could prevent the rooftop from revolving around her. The breathy sigh leaving her lips turned into a giggle.

“I don’t know what you’ve put in that stuff but, damn, it packs a punch.”

Orion chuckled, the hand around her back playing with a strand of her ponytail; she had to laugh as he tickled her neck with the ends of it. “There’s nothing out of the ordinary in there.”

She leaned a little away from him so as to better see his face. “So, what is it? Spill it!”

His smile turned into a smirk. “Who am I to tell you all my secrets? A little mystery only adds to the fun.”

Intrigued by his evasiveness, Lizzie raised her eyebrows. “Is that a challenge?”

A curious expression flickered over Orion’s face for a moment. “Maybe.”

“Whatever it is, it’s thoroughly wrecking me,” Lizzie declared; that didn’t stop her from taking another sip of wine, however.

She could hear the laughter ringing in Orion’s voice. “That’s got less to do with the grass and more with all that wine. And the fact that you’re really, really small.”

“I’m not really, really small!” Lizzie replied indignantly.

“Of course you are, look at you; you’re basically a midget.”

Lizzie shoved him playfully, trying to keep a straight face but failing. “I’m not a midget and I’m not small!”

Orion caught her hand without so much as an effort. “Just look at you, you could wear my sweater as a dress.”

“I don’t know what you’re talking about, I’m the perfect size.”

There it was again, that curious expression Lizzie had seen just a moment before. A crooked smile appeared on Orion’s face as his eyes flickered from her face over the rest of her body.

“I can hardly argue with that.”

Lizzie regarded him for a moment, trying to take his measure. The mood had shifted from the relaxed cuddle they’d shared into something entirely different. There was a sudden tension hanging in the air that made Lizzie’s skin tingle and she was sure that it had nothing to do with either the grass or the alcohol.

The corner of her mouth quirked up. “Is that so?”

She leaned forward again to put the wine glass away, using the momentum to shift her position. Turning slightly, she straddled Orion’s thighs, one arm resting lightly on his shoulder.

His dark eyes followed her every movement as she plucked the joint from his lips, gave it one slow, deliberate drag before putting it out against the wall, never breaking their eye contact. Holding the smoke inside her mouth for one long moment, she dipped her head back and blew it against the night sky. When she looked back at Orion again, his eyes on her were intense, making a shiver run down her spine. His hands were holding her hips, waiting on what she would do. Her lips curved into a smirk as she leaned in, her lips close to his ear.

“Only one way to find out.”

There was nothing hesitant about the way their lips found each other for the first time. Lizzie could taste the same fruity sweetness of the wine on his lips that was still hanging on hers.

Orion’s grip on her waist intensified and she could feel the rough skin of his hands as they found their way underneath her shirt, his fingers feeling deliciously cool against her heated skin. Her breath accelerated as their kiss deepend, her lips parting willingly as Orion’s tongue brushed against her lower lip.

She buried her hands in his long hair, as he pulled her closer, their bodies pressed together as closely as their position would allow. A low moan left Orion’s lips as she softly pulled at his hair, the movement of his head following her lead as he dipped it back into his neck.

Breaking their kiss, Lizzie’s lips started moving over his cheek to his jawline, her breath ghosting over his bare neck. She could see the goosebumps on his skin and feel his fingers dig into her waist as she teasingly ran her tongue over his collarbone. He sucked in his breath in surprise as her teeth nipped the sensitive skin and Lizzie couldn’t help but grin as her lips travelled upwards again.

Capturing his lips in another searing kiss, Lizzie’s breath hitched as his hands were sliding down from her waist over her hips. They came to rest on her bum, squeezing it tightly for a moment. She could feel his jeans becoming tighter as she ran her hand over him, coaxing another moan from his mouth. The sound made the heat spread from her stomach through her chest and into the rest of her body; she wanted to hear more of that.

Her fingers started working to undo his belt when he suddenly stopped her, gently pulling her hand away. Her eyes flew towards his face, a crease appearing on her brow.

“You not okay with this?”

Orion’s eyes were sparkling as he pulled her in for another kiss that took her breath away. When he pulled back, Lizzie’s head was spinning.

“Let’s take this inside,” he muttered into her ear. His voice sounded a lot deeper than what she was used to and she shuddered in anticipation.

Lizzie reluctantly climbed off him to let him get up. Orion couldn’t resist kissing her again, as he walked past her. Taking her hand, he pulled her towards the skylight that led down into the darkness of his flat. He climbed down the steps without a moment of hesitation; Lizzie, however, had to channel her concentration on something different than the burning need to feel Orion’s hands on her skin before tackling the unfamiliar steps.

And sure enough, two steps down, she misplaced her foot and felt herself falling for a moment. But for the second time that evening Orion was there, his hands providing her with something to hold onto.

Standing on the steps, Lizzie was a little taller than him. She gave in to the urge to pull him towards her and steal another kiss from him. His hands ran over her exposed thighs, leaving a trail of goosebumps behind. Lizzie’s muscles tensed when he lifted her off the stairs, her legs wrapping around his midsection as he carried her over to his bed with a few short steps.

He lowered her down onto it and got rid of his shirt. There was no light in the room except for what was falling through the windows from the streetlights outside, but it was enough for Lizzie to see all of the countless tattoos decorating his skin, all the thoughtful quotes and intricate patterns.

She propped herself up on her elbows, locking eyes with him as he joined her on the bed. Reaching for his belt again, this time Orion let her undo it without objection. The deep moan she drew from him as she ran her hand over him a second time made her breathing speed up as well.

Much to her surprise, now that they’d changed location, their roles had reversed themselves. Where Lizzie had been in charge up on the rooftop, it was all she could do to keep her wits together as Orion let his hands roam her body.

The sweater she had still been wearing went almost instantly, quickly followed by her shirt and her shorts. Lizzie closed her eyes and held her breath as Orion worked his way from her lips over her neck, trailing kisses down between her breasts, lingering there for a sweet moment before moving on even lower. His soft lips combined with the bite of his beard almost drove her insane, but Lizzie just so managed to pull herself together.

Pushing him off her, she used his moment of confusion to flip him over, straddling him again. She shuddered at the feeling of him through her pants but pushed the thought aside; not just yet.

“Did you really think I was going to make this so easy for you?” she purred as she twirled his necklace around her finger. She smirked as she slightly repositioned herself on top of him, creating a delicious friction between them that had not only Orion exhale very slowly.

Lizzie pulled her hair tie out, enjoying the tickle as her light brown curls fell down beneath her shoulder blades. She bent forward to kiss Orion again, but he was simply staring at her.

“What?” she asked with a slight chuckle.

“You’re so beautiful,” he whispered, brushing her hair that had fallen over her shoulder and was almost reaching his bare chest out of her face. Lizzie enjoyed the light pull as he raked his fingers through her mane. “So damn fucking beautiful.”

Lizzie felt a smile form on her lips before she kissed him, teasingly biting his lip. She could feel Orion’s hand wandering up her bare back to where her bra was still hooked. With a practised movement that didn’t surprise her in the least, he undid the clasp and Lizzie shrugged it off. The cool air coming in from the still open skylight hit her bare breasts and made her shiver from more than cold.

Orion’s hands danced over her thighs and up her sides until they found her breasts. Lizzie shuddered as his fingers grazed her sensitive spot at their base, her eyes closed to enjoy the sensation fully, when he suddenly stopped.

Opening her eyes again, she saw a curious look forming on his face as he turned her slightly so the light would better shine on her. Lizzie chuckled to herself; she knew exactly what he was so surprised to see.

“I never knew you had a tattoo,” Orion said, his eyes wandering over the black writing.

He traced his fingers over the inked words sneaking over her ribcage to the base of her breasts; the touch of his calloused fingertips made her sigh.

“You recognise the words?” she whispered with a smile, running her hand over one of Orion’s own tattoos on his chest.

“Unbounded like water, burning like wildfire,” he smiled, “of course I do; I wrote them after all. I had no idea you had them inked.”

She smiled back at him; the quote was taken out of one of her favourite songs Orion had ever written. “They’ve pulled at something in me ever since I heard them for the first time. I wanted to carry them with me wherever I go.”

A series of different emotions flickered over Orion’s face, much too quick for Lizzie to distinguish in the half-light of the room. He sat up, wrapping his arms around her, keeping her close. He kissed her with a passion that took her breath away.

“I want you,” he whispered into her ear, his voice low and husky in his throat, making Lizzie draw a shivering breath as she leaned her forehead against his.

“Then come and take me.”

It was all Orion needed to hear. He let himself fall back onto the bed, drawing her down with him. Their lips met in a passionate kiss before he flipped them around, so he was on top of her.

His head dipped against her shoulder as Lizzie reached down, tracing the edge of his boxers before her fingers disappeared beneath it. She ran them up and down his length, noting how his breath hitched, his arms tensing around her as she worked against him.

He stopped her after a few more strokes and moved away from her hand. Repaying her in kind, he ran his fingers over her pants, so very slowly, his eyes never leaving hers as she moaned at his touch. Hooking his fingers underneath the fabric, he pulled them off, leaving her fully exposed to him, but there wasn’t a single moment Lizzie felt vulnerable at all.

She gasped as Orion began to touch her properly; the touch of his rough fingertips was surprisingly soft, and combined with the trail of kisses he left on her hot skin, he made her feel like she was on fire. Her breathing strained, she managed to rasp out his name just before she would lose it completely.

Never stopping the movement of his hand, Orion looked up at her with a wicked grin on his lips.

“Anything the matter?”

All she wanted was to feel him by now but her words died on her lips as Orion slightly twisted his hand, making her inhale sharply.

With a low chuckle he withdrew his hand, making her miss his touch immediately. That short moment of regret was instantly forgotten when she felt Orion position himself before slowly pushing inside her.

For a fraction of a second, the reality that she was sleeping with one of her best friends hovered on the border of Lizzie’s mind, threatening to hit her; but when Orion started moving against her, their bodies instantly found a common rhythm. They were in tune with each other from the very first moment, all thoughts forgotten.

Their ragged breaths, her sweet sighs and his deep moans were a music of their own. Lizzie had her legs wrapped around Orion, her nails digging into his forearms; she could feel his muscles working underneath her fingers as he supported his weight with his arms. Even through the haze of her drunk and drugged mind, she was impressed with how flawlessly they were working together; his body against hers was feeling so incredibly natural, like they were meant to be that way.

She had no idea how, but just like before, Orion managed to hit all the right spots at the same time. Lizzie had trouble focusing on anything but the fire building inside her. She couldn’t form a coherent thought anymore, wasn’t able to think any further than the next breath, the next shock of pleasure Orion sent through her body as they moved.

Feeling she was almost there, her hold on him tightened as he picked up the pace, shifting slightly to take a little strain off his arms. Taken by surprise at the suddenly different angle, digging her fingers into Orion’s shoulders was all Lizzie could do as her high crashed over her like a tidal wave. Her body shook as she buried her face against Orion’s chest, clinging to him as if for dear life.

Hearing his name fall from her lips in a broken moan with her nails biting into his back, Orion couldn’t last much longer either. Their rhythm became an off-beat one, his movements more erratic than before. Lizzie could feel the muscles in his back tremble as he rode out his own high. His head dipped into the crook of her neck as both their breathings were starting to slow.

Orion stayed on top of her for a moment longer and kissed her one last time before pushing himself off of her. Lizzie breathed in deeply, running her hand over her tangled hair.

“Huh,” she chuckled, “who would’ve thought.”

“Who indeed,” Orion smirked.

The sizzling tension between them from before was gone and it just felt like it had always done between them; relaxed, familiar and completely natural.

They looked at each other for a moment before simultaneously bursting into laughter, nothing more than friends again, the sound carrying through the dark, out of the window and into the black night sky.