#ms excel setup

[starpains]

A deep dive into AO3 stats

I was feeling a bit bored today, so I decided to create something awesome for myself!

Some of you might already know that I work in data analytics, and I’m not sure if everyone realizes this, but you can actually connect MS Excel Power Query to AO3 to sync your stats and perform in-depth analysis—far beyond what AO3’s built-in stats offer.

My stats aren’t exactly impressive since I only joined the fandom six months ago, but here’s a glimpse of the kind of insights you can generate with this setup:

I analyzed reader engagement with my fics by calculating the percentage of people who comment, leave kudos, or bookmark each fic relative to the total number of hits it received. This gave me three measures of engagement: Comment Threads per Hit (CTpH), Kudos per Hit (KpH), and Bookmarks per Hit (BpH).

To avoid skewed results caused by differences in scale across these measures, I standardized them. I did this by dividing each value by the maximum value in its column, which normalized the data and made the metrics comparable. These standardized values were then combined to calculate an Average Engagement per Hit (AVGpH) for each fic. This single metric allowed me to rank my fics from best to worst based on overall engagement per reader.

Here’s the surprising part: my best-performing fic in terms of engagement isn’t my most kudosed one (ranked 4th), nor is it the most commented (ranked 2nd), or the most bookmarked (ranked 8th). This highlights that pure volume of kudos, comments, or bookmarks doesn’t always reflect the quality of reader engagement relative to the fic’s visibility (hits). Instead, it’s the balance across all three engagement types that determines which fic truly resonates most with readers.

I also analyzed my stats per word to see how the length of my fics influences engagement. While it’s still early to draw definitive conclusions—especially since my longest fic is still a work in progress (I’ll definitely revisit the stats once it’s finished!)—there are already some interesting patterns emerging.

By breaking things down into metrics like Comments per Word (CTpW), Kudos per Word (KpW), Bookmarks per Word (BpW), and Hits per Word (HpW), I could compare how readers interact with fics of different lengths. I combined these into an Average Engagement per Word (AVGpW) to rank my fics by their engagement efficiency.

Key Takeaways

Shorter fics tend to have higher engagement per word. Some of the shorter fics perform exceptionally well, with high Hits per Word and strong kudos and bookmarks per word. On the other hand, longer works show diluted engagement per word, likely because their length makes them a bigger commitment for readers.

Balanced fics perform the best overall. Fics with solid kudos, bookmarks, and hits per word are ranked as the most engaging across the board.

Length affects engagement differently. Shorter or mid-length fics often generate more impact per word, likely because they’re easier for readers to consume quickly. Longer works, while attracting more total engagement, tend to have lower per-word metrics, likely due to their scale.

My top-ranked fic in terms of engagement per word is, interestingly, the one with the most kudos. However, it also has the fewest comments! It’s ranked 7th for bookmarks and has the lowest number of hits among all my fics.

I’m curious to see how these trends shift once my longest fic is complete—it’s a factor that could change these results significantly. For now, though, this analysis highlights how length can influence the way readers engage with your work!

[shutupineedtothink]

X files mini review/analysis 3x02 "Paper clip"

Coming as the final part of what is basically a trilogy of episodes starting with the s2 finale, this was easily the craziest ep and probably the best I've seen in the show so far. I actually watched it twice!

First of all this ep covers hella ground. The amount of stuff they packed in here from mulder showing back up and the Spiderman face off with Skinner to secret files on anyone and everyone apparently including our scully and Samantha mulder to wait there were aliens in there?? To Melissa Scullys death at the end and MS final convo + hug was crazy. With cameos from the lone gunmen, scullys mom, Albert, CSM, etc etc. Lots going on and it still felt coherent and well paced to me.

Some highlights:

- how did you know? I just knew. -> biggest "we are about to kiss" energy I've seen so far. Also i more or less predicted this scene before we saw it from previous episodes, but it was no less excellent.

- scully verbally gunning for nazis was not something I knew i needed until now, please do more

- secret rich guy organization is kinda meh overall but I like the British guy

- Albert is the real hero of this ep for flying to DC just to pray over Missy

- love an old spooky mine, very scooby doo of them

- also the music? Went off this ep

- scully is really sweet for her concern over what they will find about mulders dad, but sweetie this is not the time also this man is out for answers

- sassy Skinner is my favorite skinner

- the file room/mine area gives ark of the covenant vibes slightly

- i love that mulder is immediately looking for her file and then his sisters

- fox mulder do not leave your partner behind in the creepy mine to chase aliens

- omggg the aliens running past scully got me

- looove the spaceship rising through the windows

- so that was a fuckin ufo and we're just gonna move on cool cool cool

- this shootout was fun ngl, v 80s action movie energy

- hm they kinda just get away, I think it'd be fun if there were some leftover aliens that took out the swat guys

- they really just hitchhiked to this diner huh

- they both have food but neither are eating, that feels deliberate

- what are you hoping to find agent Mulder? Why they killed my father. And what happened to my sister. And what they did to agent scully. She's his Family!! My heart.

- this convo is sooo good. Gillian acting the shit out of it as always

- interesting that mulder can't quite bring himself to make the deal, but he leaves it to scully basically already knowing what she'll do

- Actually, it is like he's giving up his family for hers in that moment, Jesus. And then Missy dies anyway. Fuck.

- so im not getting the white buffalo logic. If the mother died and the baby lived, wouldn't that mean Missy should live? Wait are they saying because mulder lived Missy had to die? I'm confused.

- krycekkkk!!!! Sucks!! Get blown to hell mf see if I care

- mulder finally getting "the truth" and maybe it wasn't what he wanted hmm

- so krycek has the tape now. You know what that is kind of interesting. And csm is lying about it. OK yes this is good setup.

- so mulders dad AND mom knew that Samantha would be taken??? Jesus.

- again, sassy Skinner is my favorite skinner.

- I like Albert being the living file but what is stopping them from killing all those guys really. I guess unless Skinner really is bluffing?

- i LOVE LOVE LOVE this ending hospital scene, specifically the lighting and the framing of the shot. Her sitting in the chair, him kneeling next to her, the light between them but they're both in darkness from the back, ugh it's so good.

- I think its about fate... idk if you should say that to someone after their sister just died.

- I've heard the truth mulder, now what i want are the answers. Banger line!

- I wonder if they planned that hug or he just went for it but I appreciate it either way.

- I hope scully gets to shoot krycek. Let her have revenge i would love to see it.

Overall great ep. A little all over the place but in a good way. Rip Missy I didn't think they would actually kill you.

[alfietalksaboutcomics]

NYX #1 Explores Life After Krakoa

Hey! It's been awhile since I posted but I'm still around! Late July I did a reivew for Graphic Policy on NYX #1. I posted the link but I'm also going to try something new and post the text of the review here on Tumblr! I also would just like to add that as of this posting the series has gone up to issue #3 and so far it's my favorite book in the From the Ashes relaunch! Anyhow with all that said I'll leave you with the review!

How do you cope with the loss of paradise? This is the question at the heart of the From the Ashes relaunch of X-Men, and no title so far exemplifies that question more than NYX. The mutant island nation of Krakoa is no more and its diaspora is left to pick up the pieces. And like so many of the world’s diasporas, many Krakoans find their new home in New York City, holding onto what community they have left.

This first issue of NYX is told largely through the perspective of Ms. Marvel. She is an interesting character to hinge the first issue on seeing as she never quite got to experience the promise of Krakoa and is still exploring her newfound mutant identity. Writers Jackson Lanzing and Collin Kelly pick up the thread of Kamala attending college courses in NYC that was established in her last run of solos. The school that once was receiving funding from an anti-mutant hate group now is host to a ethnic studies course on Krakoa and its diaspora, taught by Xavier’s own Prodigy, now going by Professor Alleyne. Kamala is attending this course alongside her new friend and Prodigy’s former classmate at Xavier’s, Sophie of the Stepford Cuckoos. Other Xavier’s alumni like Anole and Laura Kinney the Wolverine also make appearances in the  comic, as a bartender and vigilante respectively. Seeing Kamala bounce off between these characters is fun and interesting. Alongside these more positive budding relationships Kamala runs into several threats in this issue, one being a anti-mutant group called the “Truthseekers” and another being the mysterious self proclaimed Krakoan dressed in a mix of Magneto and Professor X’s Krakoan costumes, who may or may not have a connection to members of the books cast that should provide for some interesting drama. 

This book should be a particular treat for fans of the Academy X run of comics, that subsect of the X-Men fandom have long been asking for a book that centers around characters from that series and NYX seems like the answer to their prayers. 

I find myself in a curious position vis à vis this book. I myself am a twenty-something queer New Yorker college student. The characters in this book are largely teenager to twenty-something allegorically (and in some cases literally) queer New Yorker college students who are members of a diaspora. This is a setup that is quite similar to my own life. Thus I feel a certain draw to this book that’s subject matter so closely relates to my lived experience. I will admit to getting a kick out of seeing the imfamous Highline sculpture, the Vessel in the issue. I eagerly anticipate seeing more NYC landmarks throughout the following issues. The characters feel pretty authentic to my lived experience, Lanzing and Kelly pretty solidly land the voice of my generation.��

The art by Francesco Mortarino feels like a step up from his work on Avengers, the first page in particular is quite stunning, partly due to Raul Angulo’s quite excellent colors. The characters look appropriately youthful and the rendering of NYC is well done. I’d compare Mortarino’s faces to Luciano Vecchio’s work, but while it’s similar in the angler nature of the faces it’s still suitably different and it’s own thing. In general the issue doesn’t have so much visual spectacle but the art team makes it a compelling visual treat. 

Overall NYX #1 isn’t the most flashy of first issues but it’s laying down a lot of interesting tracks, the characters aren’t really a team yet but honestly I think that’s not exactly what the book is going for. NYX seems to be telling a story about a group of young mutants finding their place in a world post the fall of their homeland, and it does a pretty damn compelling job doing it. This is definitely a book to keep an eye on.

Story: Jackson Lanzing, Collin Kelly Art: Francesco Mortarino Color: Raul Angulo Letterer: Joe Sabino Story: 8.5 Art: 7.5 Overall: 8.0 Recommendation: Read 

[mcsquared987]

Mysterious Affair at Styles — Ch 1

Alright, this is it! The beginning of a little book club blog where I attempt to read and document every Agatha Christie novel I can in order to attempt to solve it. And then, I'll likely review and rate the book at the very end.

We start with the very first novel Christie ever wrote, which is also the only one I've ever read to completion almost two years ago. I know a few of the details, but my memory is very hazy — so this will be a good chance to refresh it, as well as to establish the format I will be taking for this blog in regards to all the other books!

This should be fun. Keep reading to see me cover the first chapter... and if you're interested in following along, feel free to follow. :)

Based on what I know of Agatha Christie, I am aware that she has gone much further than any other in the murder mystery genre to become immortalised as the queen of crime. I am seeing the roots of that in her writing in these first chapters: I think the mystery will be pretty straightforward, and most of the characters can be summed up in one or two traits. But that simplicity makes it work — and they are still written to appear at least human in the way they talk to each other, even if they keep on dropping obvious hints that something is going to go wrong. I mean, how many times can they keep referring to poison in the same line as the death of Ms. Inglethorp? It's almost like a Greek tragedy.

Hastings is also a pretty neat narrator, seeing that the prose is blissfully composed of mainly facts and insights from him and the other characters, without slowing down the plot at all. I really like that! — especially while it's all written with the perspective of hindsight. Like he implies in the beginning, I can really see Hastings giving most of this as a statement in court. I am aware that he won't be present in every story however, so I am curious to see what will replace him later on. (Maybe it's for the best that he doesn't somehow end up in EVERY murder lol.)

All being said, I also do see things that have not aged well for this book — mainly for example, how Miss Raikes is described and the distrust the English characters have towards her. Not great. For her sake, I at least hope that her role in all this will be minor.

This is the beginning of the timeline I have created that will mark the progress of events. It's pretty small for now, but HAVE NO DOUBT that it will balloon out significantly. Most of the chapter is setup to introduce the characters and lay the framework for the murder in Ch3, so there's not much to talk about at the moment. But soon...

And here's the main family tree. My impression: I think a core part of the motivation for the murder will absolutely be about the inheritance of Styles, which seems to have been ripped away from John (and Mary) and Lawrence. And poison has to be the method too, from all the clear hints to it, to Cynthia being a dispensary and there also being a doctor who has a CLEAR knowledge of poisons. However, I think that doctor is very much a red herring. I think he may be more crucial to solving the mystery.

Okay, I think that's everything! As I go on, there will be more mystery solving and less discussion of what I think about the book. But this chapter serves as an excellent introduction.

Thanks for reading this! If you like what you see, let me know. And stay tuned for more.

[incomingalbatross]

@aslanscompass Thank you for your interest! A lot of the details on the Mel in my head are a little vague, but here's what I've got...

(IMPORTANT NOTE: We brainstormed a fair amount of this together, but at LEAST half of it is my sister's. Due credit to MissAppropriation!)

First of all, Twelve and River definitely had kids on Darillium. This is important to all the rest.

Mel (named after Melody, more or less) is either the daughter or granddaughter of one of these children. The hair obviously comes from the Pond side, and her taste for shenanigans comes from ALL sides. Both traits run in the family.

We're not saying Ms. Frizzle is one of her cousins but we're not saying she's NOT. That's a different story, though.

Mel goes out into the wide cosmos as an adult and gets up to some Adventuring.

Ainley Master, meanwhile, is getting concerned about the increasing amount of Gallifrey Intrigue trying to catch the Doctor in its webs. He's caught wind of the Valeyard plot and is trying to get to the bottom of that before it come to fruition, but he ALSO wants an eye on the Doctor.

He finds Mel, currently presenting herself as a Space Adventuress looking for work, and whose bubbly demeanor reminds him of Jo (which means of COURSE the Doctor will like and trust her). He offers her a job as his inside man in the TARDIS.

Mel, with all the chaos instincts of her lineage, thinks this is absolutely hilarious and also a golden opportunity to be friends with her Grandad when he's younger! Of course she accepts, like a shot.

The "Oh, we're meeting out of order, I'm definitely your companion though" setup at the Trial was at least half a con run by her and the Master. Probably mostly a con. Mel's idea, and no she did NOT properly credit her grandmother.

Anyway, Mel proceeds to have an excellent time with Six and eventually Seven, feeding the Master mostly-harmless information while he, in turn, keeps trying to unravel WHAT exactly was up with the Valeyard and what Gallifrey's gathering darkness might mean for him and the Doctor (HIS best enemy! No one gets to touch him and CERTAINLY not Gallifrey).

Eventually Mel has to leave. Reports are divided on whether she ACTUALLY went on to have adventures with Glitz, or whether she walked into a mysterious object waiting halfway between the TARDIS and the hangars, that soon disappeared without a trace...

[dimalink]

May-Summer racing competitions MSRC

Pixel art for today based on videogame Network Q Rally for game console Super Nintendo. It is 16 bit Racing game. I played for myself this game at PC MS DOS. With my 486Dx2 computer, SVGA graphics. So, game looks similar. But, anyway, I think it is a little another game.

But I remember it, I and my bro, we play it. We like this racing game a lot. Beautiful three-dimensional graphics. Different views. From car, 3d view. And such a track along casual roads. As we think about it. Forest, field. Not exotic views, with super views. And about a casual views. Forest, river, bridge. We like this game for these things. And I remember green track, it was there. Lots of forest and grass. So, this is impression from this game. It is a very good racing game. And, I think, that version for Super Nintendo is also excellent! 16 bits variation!

And this is my drawing about the same theme. Racing starts in may and will continue all the summer season. It is a cycle of road competitions. Tracks are made special ways for this competition. But they are about a casual roads. Through the forest. Field. Bridge. River. And never through the cities. And more about an open space. Like forest, field. Road though the forest.  And one moment, it is all the time a lots of grass by the sides of the road.  And, maybe, a road though forest. A bridge across the river. Of course, you can to make a stop. And look a views. To make some photos. Your car. Yourself. And go next. Racing is about rally idea. All starts one by one, after some time. Using some pause between each new starting car. There are control points, check points.

And so it is going a racing time. And a well-known forests and fields. Racing is about a middle level of cars. They are no special setup for racing. And about a casual cars, that you can see at the streets. So, any one, who likes the idea can take a part in a racing.

 Between racings there are some time to restore powers. And then - next race. It is its own class of racing competitions. It is very good about cars from 80s, 90s and so on. But you need to be ready for different road type. And take into account, a low or badly asphalt roads, or sand roads, soil roads. But asphalt, of course, it will be a lot, a lots of asphalt roads to be here.

So, racing will be intense. And sport uniform is very good to have. Gloves of a car driver. A helmet. To avoid some difficulties. And racing, anyway, it will be with comfort and relax too. And, from time to time, it will be hard about a making turns. And try to make a better position on the roads, and overspeed another racers, sometimes. And at some moments, it will be a tracks with almost straight roads, and rare turns. But, distance is more long. So, it is a mixed typed of tracks.

Dima Link is making retro videogames, apps, a little of music, write stories, and some retro more.

WEBSITE: http://www.dimalink.tv-games.ru/home_eng.html ITCHIO: https://dimalink.itch.io/ GAMEJOLT: https://gamejolt.com/@DimaLink/games

BLOGGER: https://dimalinkeng.blogspot.com/

[msmachining1]

Stretch Forming Process: Revolutionizing Metal Fabrication

In the ever-evolving landscape of metal fabrication, innovation plays a pivotal role in enhancing efficiency, accuracy, and overall quality. One such transformative technique that has significantly influenced modern metalworking is the stretch forming process. This advanced method has redefined how manufacturers shape and form complex components, particularly in aerospace, automotive, architecture, and other precision-driven industries. Among the leaders in this domain is MS Machining, known for delivering cutting-edge solutions that embrace the power of stretch forming and its specialized variant—stretch roll forming.

What is Stretch Forming?

The stretch forming process is a metal forming technique in which a sheet or extrusion of metal is stretched and simultaneously bent over a die to form a specific contour or shape. Unlike conventional bending, where metal is pressed into a form, stretch forming ensures that the metal is under tension throughout the process. This results in a smoother, more uniform curvature, free from wrinkles, buckling, or internal stress concentrations.

This technique is especially suitable for producing large and complex contoured parts that demand high accuracy and aesthetic finish, making it ideal for aircraft skins, building facades, automotive panels, and even modern art installations.

How the Stretch Forming Process Works

The stretch forming process can be broken down into several key stages:

Clamping: The metal sheet or extrusion is securely clamped at both ends using powerful hydraulic jaws.

Tensioning: The material is then pulled to a specified elongation, applying precise tensile forces.

Forming Over Die: While under tension, the metal is gradually wrapped over a die or form block.

Release and Springback: Once the shape is formed, the metal is released. The process is designed to account for minor springback (elastic recovery), ensuring the final shape matches design specs.

The result is a component with high structural integrity, dimensional stability, and excellent surface quality.

What is Stretch Roll Forming?

A specialized version of the stretch forming process is stretch roll forming. This technique combines the stretching action with the rolling process to gradually form the metal into a desired shape over a series of rolls, rather than a single die.

Stretch roll forming is particularly effective for producing long, continuous shapes with uniform cross-sections, such as curved beams, structural supports, and paneling for aerospace or construction applications. It provides added versatility in forming intricate curves and variable radii without the need for multiple setups or complex tooling changes.

Advantages of Stretch Roll Forming

The advantages of stretch roll forming are numerous and contribute significantly to its growing popularity in the fabrication sector:

Superior Accuracy: The process offers excellent control over the shape and curvature of the final part, minimizing errors and material waste.

Improved Surface Finish: Since the metal is formed under tension, it reduces the chances of wrinkles or buckling, delivering a clean and smooth finish suitable for visible applications.

Cost Efficiency for Long Runs: Especially for projects requiring long and consistent parts, stretch roll forming reduces material waste, increases throughput, and minimizes rework.

High Repeatability: The process provides consistent results across multiple parts, which is critical in industries like aerospace and automotive.

Material Flexibility: Compatible with a wide range of materials, including aluminum, steel, titanium, and high-strength alloys.

Reduced Tooling Costs: Since fewer tools are required compared to traditional stamping or press forming, it leads to significant savings in both cost and production time.

Lightweight Component Fabrication: Ideal for industries aiming to reduce weight without compromising strength—particularly relevant in aerospace and transportation.

Applications of the Stretch Forming Process

Thanks to its precision and versatility, the stretch forming process finds applications across a variety of sectors:

1. Aerospace Industry

Aircraft fuselages, wing panels, window frames, and engine components often demand seamless curves and stress-free surfaces. Stretch forming ensures dimensional precision and load-bearing strength essential for flight safety.

2. Automotive Manufacturing

For sleek, aerodynamic car body panels, hoods, and trim, stretch forming offers a wrinkle-free and high-quality finish. The ability to form both aesthetic and functional shapes with minimal tooling makes it a top choice in the automotive industry.

3. Architecture and Construction

Metal panels used in modern buildings for aesthetic facades or structural purposes are frequently formed using this technique. Stretch forming enables complex, artistic curves that define contemporary architectural styles.

4. Railway and Transportation

Trains, subways, and trams utilize stretch-formed components for their lightweight strength and resistance to fatigue.

5. Energy and Power

From wind turbines to solar panel frames, stretch forming ensures reliable, strong, and lightweight components that contribute to efficient energy systems.

MS Machining: Pioneering Precision Fabrication

MS Machining has established itself as a leader in precision metal fabrication services. With a strong commitment to quality, innovation, and customer satisfaction, the company has embraced the power of stretch forming and stretch roll forming to deliver high-performance components across demanding industries.

By leveraging state-of-the-art equipment and a skilled team, MS Machining ensures each component meets the most rigorous standards. Whether you require complex aerospace structures or custom-formed architectural panels, MS Machining provides end-to-end solutions tailored to your needs.

To learn more about their stretch forming capabilities, visit: https://ms-machining.com/stretch-forming-process/

Why Choose Stretch Forming Over Traditional Methods?

Traditional forming methods like stamping or press bending can struggle with producing complex curves, especially in large parts. They often lead to issues such as:

Wrinkling or tearing

Uneven material distribution

Poor repeatability

High tooling costs

In contrast, the stretch forming process offers a controlled and precise solution. When integrated with stretch roll forming, the benefits multiply, especially for long and continuous production. It strikes the perfect balance between strength, aesthetics, and efficiency—qualities crucial for modern engineering.

Final Thoughts

The stretch forming process and its advanced variant, stretch roll forming, are revolutionizing the world of metal fabrication. They provide unmatched precision, quality, and efficiency—factors that are critical in industries driven by innovation and performance.

With companies like MS Machining at the forefront, businesses can now access top-tier fabrication capabilities that push the boundaries of design and functionality. As technology continues to evolve, stretch forming is poised to remain a cornerstone technique in the next generation of metalworking.

[kishansingh2524education]

📍 About Krishna Mohan Medical College and Hospital

Krishna Mohan Medical College and Hospital, located in Mathura, Uttar Pradesh, is a leading private medical college recognized by the National Medical Commission (NMC) and affiliated with Atal Bihari Vajpayee Medical University. The college is well-known for its commitment to high academic standards and practical training.

With a focus on research, community service, and student development, Krishna Mohan Medical College and Hospital prepares students not just to pass exams, but to excel in real-world medical practice.

🎓 MBBS Course Overview

The MBBS program at Krishna Mohan Medical College and Hospital is a 5.5-year undergraduate medical course that includes 4.5 years of academic study and a 1-year mandatory rotating internship.

✅ Key Highlights:

Duration: 5.5 years (Including 1-year internship)

Total Intake: 150 students per year

Medium of Instruction: English

Affiliation: Atal Bihari Vajpayee Medical University

Approval: Recognized by NMC

The course is divided into three phases: pre-clinical, para-clinical, and clinical. Students get early exposure to hospital settings and start interacting with patients under the supervision of experienced doctors.

🧪 World-Class Infrastructure & Facilities

One of the biggest strengths of Krishna Mohan Medical College and Hospital is its modern campus. The college offers advanced labs, lecture halls with digital teaching aids, and well-stocked libraries.

Facilities at a Glance:

720-bed teaching hospital

Modern operation theatres

Intensive Care Units (ICUs)

Simulation labs for practical training

Central library with digital access

Separate hostels for boys and girls

Cafeteria and sports facilities

This setup ensures that students not only study from books but also learn through practical experience in real-time healthcare settings.

📝 Admission Process for MBBS

To get admission to Krishna Mohan Medical College and Hospital, students must follow the NEET UG (National Eligibility cum Entrance Test) process.

Eligibility Criteria:

You must be at least 17 years old

You must have passed 10+2 with Physics, Chemistry, Biology, and English

You must qualify for NEET UG

Admission Steps:

Appear and qualify in NEET UG

Participate in UP NEET Counseling

Choose Krishna Mohan Medical College and Hospital as your preferred college

Submit required documents and pay the admission fee

💰 Fee Structure

Compared to other private medical colleges, the fee structure at Krishna Mohan Medical College and Hospital is competitive and transparent. While the exact fee may vary yearly, here’s an approximate idea:

Tuition Fee: ₹11-12 lakhs per annum (subject to change)

Hostel & Mess: ₹1-1.5 lakhs per annum

Scholarships and educational loan facilities are also available for eligible students.

👩‍⚕️ Internship & Career Opportunities

After completing the MBBS course, students undergo a one-year internship at the hospital attached to the college. During this period, they gain hands-on experience in all departments like Medicine, Surgery, Pediatrics, Obstetrics & Gynecology, Orthopedics, and more.

Graduates of Krishna Mohan Medical College and Hospital are well-prepared to:

Work as medical officers

Pursue PG courses (MD/MS)

Apply for government jobs

Join hospitals or clinics

Start their own practice

The college has an active placement and guidance cell to assist students in career planning and higher studies.

🏫 Why Choose Krishna Mohan Medical College and Hospital?

Still wondering if this is the right choice? Here’s why students are choosing Krishna Mohan Medical College and Hospital:

✅ High-quality education and faculty

✅ Modern hospital for clinical training

✅ Affordable fee structure

✅ Strong academic record and results

✅ Comfortable hostel life

✅ Regular seminars and workshops

✅ Focus on overall personality development

🗓 Important Dates (Tentative)

NEET Exam: May

Counseling: June-July

Admissions & Reporting: August

Always check the official website or UP NEET portal for the latest updates.

🔚 Final Thoughts

If you’re dreaming of becoming a successful doctor and want to study in a well-equipped college that focuses on both academics and practical skills, then Krishna Mohan Medical College and Hospital is a smart choice.

Start preparing for NEET, aim for a good score, and take the first step toward your medical career!

[sunwaymedicalcentre]

Ankle Arthroscopy in Chennai

Ankle Arthroscopy in Chennai is gaining popularity as a highly effective solution for those struggling with persistent ankle pain. If you’ve been dealing with discomfort due to sports injuries, sprains, chronic degeneration, or undiagnosed ankle issues, you’re not alone—many Chennai residents face similar challenges. Often, people turn to medications and rest, only to find that the pain returns, limiting their mobility and affecting their daily life. That’s where the minimally invasive yet powerful ankle arthroscopy procedure offers new hope. This advanced surgical technique doesn’t just mask symptoms—it targets the root cause of pain, helping you regain strength and return to a pain-free, active lifestyle. Let’s explore what makes ankle arthroscopy effective, how the procedure works, and why Ankle Arthroscopy in Chennai is becoming a trusted option for long-term relief.Let me know if you'd like this keyword added to other parts of the article as well for SEO

What Is Ankle Arthroscopy?

Ankle arthroscopy is a modern, minimally invasive surgical technique designed to diagnose and treat various problems within the ankle joint. This tool is inserted through small incisions, transmitting real-time images to a monitor. The high-resolution visuals allow the surgeon to examine joint surfaces, ligaments, cartilage, and other structures without the need for large surgical cuts. This precision contributes to faster healing, reduced discomfort, and minimal scarring compared to traditional open surgery.

Why Choose Ankle Arthroscopy in Chennai?

Chennai has become a hub for advanced orthopedic care, with several hospitals and specialists delivering world‑class treatment. Ankle arthroscopy in Chennai stands out due to:

State‑of‑the‑art surgical facilities

Experienced surgeons with specialized training in minimally invasive techniques

Efficient outpatient and day‑care procedure setups

One prominent expert in the field is Dr. Karthik P. Reddy, based at Sunway Medical Centre, Tamil Nadu. With extensive training and a patient‑focused approach, he consistently delivers excellent outcomes for ankle arthroscopy cases.

Common Indications for Ankle Arthroscopy

Ankle arthroscopy is typically recommended when patients experience ongoing pain, instability, reduced function, or other ankle-related issues that don’t resolve with conservative treatment. Dr. Reddy and his team use it to treat:

Ankle arthritis – removal of inflamed tissue or loose fragments to relieve pain

Ligament injuries and instability – repairing or tightening torn ligaments

Post‑fracture damage – assessing cartilage damage after fractures

Osteochondral defects – treating cartilage and underlying bone injuries, especially in the talus

Infections – debridement and drainage of infected joint tissue

Undiagnosed ankle pain – diagnosis and treatment of subtle conditions not visible on X‑ray or MRI

Early arthroscopic intervention can help halt joint degeneration and restore stability, mobility, and comfort.

Dr. Karthik P. Reddy – Expert Care

At the heart of this advanced treatment is Dr. Karthik P. Reddy, a leading orthopedic surgeon in Tamil Nadu, affiliated with Sunway Medical Centre. His credentials include:

MS (Ortho)

DNB (Ortho)

FIJR (Fellowship in Joint Replacement, Germany)

With over a decade of experience and a specialization in knee and hip joint replacements, Dr. Reddy brings a patient‑centric focus to ankle arthroscopy and ligament repairs. He values minimally invasive solutions, leveraging the latest arthroscopic technologies for optimal recovery, comfort, and function. His continuous learning ensures he stays updated with global best practices, and his warm bedside manner has earned him widespread trust.

The Procedure: What to Expect

Ankle arthroscopy usually takes about 45 minutes to 2 hours, depending on the complexity, and is performed under general or spinal anesthesia. The typical surgical steps include:

Small incisions – two or three punctures about 5–6 mm each, near the ankle

Arthroscope insertion – advanced imagery reveals joint surfaces, cartilage, ligaments, and debris

Joint inflation – sterile fluid expands the joint for enhanced visibility

Precision treatment – specialized tools remove loose bodies, repair torn ligaments, and clean diseased tissue

Real‑time feedback – live images guide the surgeon, improving accuracy

Wound closure – small incisions are stitched or sealed with steri‑strips

Because the incisions are small and soft tissue is preserved, the postoperative recovery is typically faster and more comfortable.

Benefits of Ankle Arthroscopy

Compared to traditional open surgery, ankle arthroscopy offers:

Minimal scarring due to small incisions

Less soft tissue trauma – reduces postoperative pain and swelling

Faster recovery – many patients begin walking with crutches or boots within days

Improved surgical accuracy – direct visualization promotes precise, effective treatment

At Sunway Medical Centre, Dr. Reddy combines advanced arthroscopic tools with a customized rehabilitation plan—maximizing recovery speed and long‑term joint health.

Post‑Surgical Care & Recovery

Postoperative care is critical for successful outcomes. After the procedure, patients follow a structured recovery path designed by Dr. Reddy:

Pain management – tailored medications based on patient needs

Ice and elevation – helps reduce swelling and accelerate healing

Follow‑up visits – scheduled checks to monitor healing and remove stitches

Physiotherapy – progressive exercises to restore strength and flexibility

Adherence to the postoperative plan ensures optimal healing and reduces the risk of complications. Early signs of issues should be reported promptly.

Possible Risks & Complications

Ankle arthroscopy is generally safe, but like any surgery, there are potential risks. Dr. Reddy minimizes these through sterile techniques and real‑time monitoring:

Infection – rare, treatable with antibiotics

Bleeding – controlled intraoperatively

Compartment syndrome – rare increase in pressure within muscle compartments

Persistent pain/swelling – typically resolves with time and physiotherapy

A detailed pre‑surgery evaluation helps identify risks and optimize surgical planning.

Why Patients Prefer Arthroscopy

Many individuals choose arthroscopic ankle surgery in Chennai because it fits into their lifestyle goals:

Athletes can return to training and competition quickly

Working professionals benefit from shorter downtime

Older adults say goodbye to pain and regain independence

Active families resume normal lives without restrictions

Choosing the Right Center in Chennai

Facilities – modern operating theaters and day‑care setup

Surgeon expertise – specialized arthroscopy training

Patient support – comprehensive rehabilitation plans

Positive outcomes – verified results from past patients

At Sunway Medical Centre, Dr. Reddy and his multidisciplinary team offer all of the above. With access to cutting‑edge equipment and individualized care, they stand at the forefront of orthopedic excellence.

Making the Decision

 Combining advanced minimally invasive techniques with expertise and personalized care leads to:

Precise diagnosis

Effective treatment of ligament tears, cartilage damage, or loose bodies

Significantly faster recovery

Less pain and scarring

Lower risk of long‑term joint damage

By choosing a trusted specialist like Dr. Karthik P. Reddy at Sunway Medical Centre, you’re investing in a brighter, pain‑free future.

Your Next Steps

Book a consultation – Get an in-depth evaluation with Dr. Reddy at Sunway Medical Centre.

Discuss treatment options – Review arthroscopy versus conservative therapy, including timelines and expected recovery.

Plan your surgery and rehab – A tailored schedule ensures a smooth, safe recovery.

Regain mobility and fitness – Step-by-step physiotherapy will help you return to full function.

Final Word

With its minimally invasive techniques, enhanced recovery rates, and high precision, the procedure is transforming orthopedic care in the city. At Sunway Medical Centre, Dr. Karthik P. Reddy’s expertise and holistic approach ensure that patients receive not only a surgical solution but a path back to movement, activity, and life.Schedule your consultation today and take the first step toward healing, mobility, and a life without limits.

[icecricnews247]

Top Players with Most Catches in IND vs ENG Tests: Safe Hands in a Classic Rivalry

India vs England in Test cricket is one of the oldest and most intense rivalries in the sport. Over the decades, we’ve seen brilliant centuries, fiery spells, and legendary performances. But often overlooked in all the action are the fielders—those who quietly make the difference with sharp reflexes and safe hands.

In Test cricket, catches win matches. Especially in the slip cordon or close-in positions, one dropped chance can change the course of the game. Let's take a look at the top players with the most catches in IND vs ENG Tests—the unsung heroes who turned half-chances into match-defining moments.

1. Rahul Dravid (India)

Catches in IND vs ENG Tests: 30 Matches: 21

Known as “The Wall” with the bat, Rahul Dravid was equally dependable in the slips. His catching technique was textbook—soft hands, steady stance, and sharp focus. Dravid’s calm presence in the cordon made him India’s go-to slipper, especially against spinners.

Why He Stands Out:

Most catches by any fielder in IND vs ENG Tests

Consistently fielded at first slip for spinners and pacers alike

Rarely dropped a chance, no matter how tough

Dravid’s safe hands were as reliable as his straight drive.

2. Alastair Cook (England)

Catches in IND vs ENG Tests: 27 Matches: 30

Alastair Cook, England’s most capped player and leading run-scorer, was also a rock in the field. Often fielding at slip, Cook had excellent reflexes and awareness, especially while standing close for England’s seamers and spinners.

Why He Stands Out:

Always alert and committed in the field

Took crucial catches at key moments

Combined durability with sharp instincts

Cook’s contributions in the field added to his legendary status as a complete Test cricketer.

3. Joe Root (England)

Catches in IND vs ENG Tests: 25+ (and counting) Matches: 25+

Still an active player, Joe Root has become one of the most dependable fielders in the England setup. Whether in the slips or close-in, Root has safe hands and a good sense of anticipation, making him a consistent catcher in pressure moments.

Why He Stands Out:

Agile and quick with both high and low catches

Fields in key positions like first or second slip

Reliable during both pace and spin spells

Root continues to climb the catching charts with every Test he plays.

4. Virat Kohli (India)

Catches in IND vs ENG Tests: 20+ Matches: 25+

Virat Kohli, known for his energy and aggression, brings that same intensity to the field. Whether in the slips or outfield, Kohli has pulled off some stunning catches, showing his athleticism and razor-sharp reflexes.

Why He Stands Out:

Quick reaction time and excellent hand-eye coordination

Takes catches at crucial times, often breaking partnerships

Leads by example with his fielding effort

Kohli’s sharp presence adds value to any position he fields in.

Know More:- Rohit Sharma Profile: Career, Stats

5. Ajinkya Rahane (India)

Catches in IND vs ENG Tests: 20 Matches: 20+

Ajinkya Rahane is one of India’s best close-in fielders in the modern era. Particularly at gully and second slip, Rahane has a calm technique and soft hands that make tough chances look easy.

Why He Stands Out:

Excellent anticipation against both pace and spin

Rarely drops regulation chances

Trusted by captains in high-pressure situations

Rahane’s quiet efficiency in the field often goes underappreciated but is hugely impactful.

Honourable Mentions

Ben Stokes (England): Athletic and fearless, capable of game-changing grabs anywhere on the field.

MS Dhoni (India): While a wicketkeeper, his catches behind the stumps in IND vs ENG Tests deserve recognition.

Graeme Swann (England): A spinner who also took some sharp close-in catches when not bowling.

Cheteshwar Pujara (India): Dependable at short leg and silly point during spin-heavy sessions.

Why Fielding Matters in IND vs ENG Tests

Matches often swing on a dropped catch or a sharp take.

Both teams use spin and pace, so fielders must adapt quickly.

Slip cordons play a crucial role, especially in overseas conditions.

Good catching builds pressure and boosts team morale.

These fielders have proven that catching is not just a support act — it’s a frontline skill.

Final Thoughts

In the high-pressure world of India vs England Test cricket, it’s often the quiet moments — a flying catch, a diving stop, a sharp reflex — that define the outcome. The players listed above have consistently delivered in those moments.

They’ve shown that you don’t always need to score a century or take a five-wicket haul to win a Test — sometimes, all it takes is a safe pair of hands.

Know More:- The Story Of The Pataudi Family In Cricket

[technosunenergy]

Semi-Integrated Lights in Raipur, Chhattisgarh: Smart Lighting for Sustainable Outdoor Solutions

As cities like Raipur move toward smarter and greener infrastructure, solar-powered lighting solutions have become increasingly popular. Among the various options available, semi-integrated solar street lights offer an excellent balance of performance, durability, and cost-effectiveness. These lights are ideal for illuminating streets, residential colonies, pathways, gardens, and remote areas where traditional grid-based lighting is challenging or expensive to maintain.

At Techno Sun Energy, we offer advanced and affordable semi-integrated lights in Raipur, Chhattisgarh, customized to meet urban and rural outdoor lighting needs.

What Are Semi-Integrated Solar Lights?

Semi-integrated lights are a type of solar street light where the solar panel is separate from the LED light unit but is connected via a cable. The LED light, battery, and controller are integrated into one compact housing, while the solar panel is mounted independently, often on the same pole.

This setup offers more flexibility in solar panel positioning and better heat management compared to fully integrated systems.

Key Components Include:

High-efficiency monocrystalline or polycrystalline solar panel

Lithium-ion or LiFePO4 battery

Smart charge controller with motion sensor (optional)

High-lumen LED lighting

MS/GI pole (as required)

Benefits of Semi-Integrated Solar Lights in Raipur

Raipur enjoys over 300 sunny days a year, making it an ideal location for solar lighting. Whether it's an urban street or a remote village, semi-integrated lights bring numerous advantages:

✅ Energy Efficient & Eco-Friendly

Uses solar energy, reducing reliance on grid power and lowering carbon emissions.

✅ Flexible Installation

Separate solar panel allows optimal positioning for maximum sun exposure, enhancing performance.

✅ Cost-Effective

Lower maintenance and no electricity bills. Perfect for government and private projects with tight budgets.

✅ Reliable Lighting

Automatically turns on at dusk and off at dawn. Ideal for areas with power cuts or no grid access.

✅ Smart Operation (Optional)

Available with motion sensors to increase brightness only when movement is detected—saving battery life and reducing light pollution.

✅ Durable Build

Weather-resistant and designed to handle harsh Indian climate conditions.

Applications of Semi-Integrated Lights in Raipur

At Techno Sun Energy, we provide semi-integrated solar lights for a wide range of applications:

Urban and rural street lighting

Housing societies, colonies, and parks

Campus pathways in schools, colleges, and universities

Temples, mosques, and community centers

Factories, warehouses, and industrial zones

Bus stops, parking areas, and farm roads

Remote villages and tribal regions under development schemes

Whether you need 9W, 12W, 18W, or 24W systems, we offer lighting solutions tailored to your needs and budget.

Techno Sun Energy – Leading Supplier in Raipur

With over 7 years of experience in solar energy solutions, Techno Sun Energy is a CREDA-registered and MNRE-compliant supplier of semi-integrated solar lights in Raipur and across Chhattisgarh.

What We Offer:

Site assessment and consultation

Customized lighting solutions for urban and rural settings

High-quality components from trusted brands

Installation services with skilled local technicians

Warranty and AMC options

Bulk supply for government tenders, NGOs, and CSR projects

We have successfully supplied and installed thousands of lights across villages, townships, and panchayats under state and central government schemes.

Success Story: Village Lighting Project in Tilda Block, Raipur

Under a rural development initiative, Techno Sun Energy installed over 150 semi-integrated solar lights in five villages near Tilda, Raipur. These lights now provide safe, reliable, and bright illumination at night, drastically improving road safety and community life. Maintenance costs have dropped, and the villagers are no longer dependent on unreliable electricity.

Government Support for Solar Lighting Projects

The Chhattisgarh Renewable Energy Development Agency (CREDA) supports solar street light installations under various schemes. Subsidies and financial assistance are available for:

Rural electrification

Smart village development

CSR initiatives

Government and panchayat projects

Techno Sun Energy assists with all documentation, approvals, and subsidy processes.

Conclusion

If you're looking for affordable, low-maintenance, and energy-efficient outdoor lighting, then semi-integrated lights in Raipur, Chhattisgarh are the ideal solution. With proven reliability and government support, these systems are lighting up streets, pathways, and public spaces across the region.

Ready to illuminate your area the smart way? Contact Techno Sun Energy today to get expert consultation, competitive pricing, and professional installation of semi-integrated solar lights in Raipur.

[rattanindustriali07]

Rattan Industrial – One of the Leading Storage Tank Manufacturers in India for Industrial Excellence

In industries where safe and efficient storage of liquids, chemicals, and raw materials is essential, storage tanks play a critical role in ensuring operational continuity and product integrity. Across India’s expanding industrial landscape, Rattan Industrial India Pvt. Ltd. has emerged as a trusted name among storage tank manufacturers in India, delivering high-performance tanks for diverse sectors with unmatched quality and customization.

Setting the Benchmark in Industrial Storage Solutions

With decades of experience and a modern manufacturing setup, Rattan Industrial designs and fabricates storage tanks that meet the highest standards of safety, durability, and performance. Each tank is tailored to the specific needs of the client, considering the material to be stored, operating conditions, and regulatory requirements.

From pharmaceuticals to distilleries and chemicals to food processing, Rattan’s tanks are engineered to serve a wide range of industrial purposes.

Wide Range of Storage Tanks

Rattan Industrial manufactures an extensive variety of storage tanks, including:

Stainless Steel (SS) Tanks – Ideal for hygiene-sensitive applications like food, beverages, and pharma

Mild Steel (MS) Tanks – Rugged and cost-effective, suitable for non-corrosive materials

Jacketed and Insulated Tanks – For temperature-sensitive products requiring heating or cooling

Vertical and Horizontal Tanks – Based on space availability and process requirements

Pressure Vessels and Reactors – Designed for chemical reactions and high-pressure storage

Every tank is manufactured with high-grade materials and undergoes strict quality testing to ensure long-lasting performance in even the harshest environments.

Applications Across Industries

Rattan Industrial’s tanks are trusted by businesses in:

Distilleries and Breweries – For fermentation, spirit storage, and blending

Food and Beverage Units – For milk, juice, oil, and syrup storage

Pharmaceutical Companies – For purified water, API ingredients, and chemical solvents

Chemical Plants – For acids, bases, and other industrial chemicals

Water Treatment Facilities – For raw water, treated water, and sludge storage

Rattan ensures all tanks comply with industry-specific regulations including ISO, GMP, and pollution control norms.

Why Choose Rattan Industrial?

Customization: Every tank is engineered based on your plant layout, capacity needs, and operating parameters

Precision Engineering: Superior design, welding, and surface finish ensure performance and longevity

Turnkey Capabilities: From design and fabrication to on-site installation and testing

Proven Track Record: Trusted by leading industrial clients across India and neighboring countries

Strong After-Sales Support: Maintenance, upgrades, and expert technical guidance available

Built for Performance, Designed for Trust

Rattan Industrial stands tall among storage tank manufacturers in India, not just for its manufacturing capabilities, but for its commitment to delivering value. Their tanks are more than just containers—they’re engineered systems that ensure safety, reliability, and process efficiency.

Whether you need storage for chemicals, food products, or industrial fluids, Rattan offers the right solution—delivered on time, every time.

Visit:- https://www.liquorbottlingplants.com/storage-tank.html

[neurosurgeonindore]

Why is Dr Amit Deora the Best Neurologist In Indore Offering Transforming Treatment?

When searching for the Best Cardiac Surgeon in Indore, many patients also discover Dr. Amit Deora—a top-rated neurosurgeon offering expert care in brain and spine conditions. With over 15 years of experience, Dr. Deora brings together precision surgery, advanced technology, and genuine patient empathy. As the Head of Neurosurgery at Choithram Hospital, he is known for delivering transformative results in complex neurological cases.

Rich Academic Background

Dr. Deora’s strong educational journey highlights why he is one of the most respected names in his field. He earned his MBBS in 2003, followed by an MS in General Surgery and an MCh in Neurosurgery. To further refine his skills, he completed a Clinical Fellowship in the UK. He is also a proud member of global medical societies like AO Spine and the Neurological Surgeons Society of India.

Treating Complex Neurological Conditions

Dr. Deora is skilled in handling a wide range of issues—from brain tumors and skull base surgeries to spinal deformities, aneurysms, and pediatric neurosurgical needs. He applies endoscopic and neuro-navigation techniques to ensure minimal invasion and faster recovery. His emergency care for head trauma is widely trusted, and he consistently delivers excellent outcomes across all age groups.

Patient-Centric, Technology-Driven

What sets Dr. Deora apart is how he merges cutting-edge tools with personalized care. His operating setup includes neuro-navigation, intraoperative monitoring, and modern imaging, ensuring every step of treatment is precise and safe. This technical excellence, paired with clear and empathetic communication, is a major reason he is recommended by so many patients.

Real Patient Experiences

Patients regularly praise Dr. Deora for his surgical skill and transparency. From saving lives in emergency surgeries to resolving chronic headaches and spinal issues, the feedback is overwhelmingly positive. Testimonials speak to his dedication, timely diagnosis, and respectful handling of every case.

Where and When to Consult

Dr. Deora is available Monday to Saturday at Choithram Hospital, Manik Bagh Road, Indore. Whether you’re dealing with neurological symptoms or need a second opinion, early consultation can prevent complications and ensure better health outcomes. For those looking beyond the Best Cardiac Surgeon in Indore, he stands out in neurosurgical care.

[vijaysalescorpin]

Everything You Need to Know About MS Pipe Fittings, Flanges, and Pipe Prices in 2025

When it comes to industrial construction, infrastructure development, and plumbing solutions, MS Pipe Fittings and MS Flanges play a vital role in ensuring a secure and leak-proof connection between pipelines. The increasing demand for durable and cost-effective piping systems has brought reputed suppliers like Vijay Sales Corporation and manufacturers like Jindal Hissar Pipes into the spotlight. In this blog, we’ll delve into the world of mild steel pipes, fittings, and flanges, and examine the current trends in MS Pipe Prices Per Kg.

What Are MS Pipe Fittings?

MS Pipe Fittings refer to the various components used to connect, redirect, or terminate sections of mild steel (MS) pipes. These fittings are crucial in maintaining the integrity of pipeline systems in industries ranging from water supply and gas distribution to oil refineries and construction.

There are several types of MS Pipe Fittings, such as:

Elbows – To change the direction of flow.

Tees – To branch the flow.

Reducers – To connect pipes of different diameters.

Couplings and Unions – For easy disconnection and maintenance.

These fittings are known for their strength, durability, and ability to withstand high pressures and temperatures, making them ideal for both above-ground and underground applications.

Understanding MS Flanges

MS Flanges are another critical component in pipework systems. They provide a method for assembling and disassembling pipelines without any need for welding. Common types of MS Flanges include:

Slip-On Flanges

Weld Neck Flanges

Blind Flanges

Socket Weld Flanges

Flanges made from mild steel are especially favored due to their affordability, easy installation, and excellent machinability. MS Flanges are widely used in industries like petrochemicals, pharmaceuticals, and power generation.

Jindal Hissar Pipes: A Trusted Name in the Industry

When discussing high-quality mild steel products, Jindal Hissar Pipes deserves a special mention. A brand under the Jindal Group, Jindal Hissar Pipes are known for their precision, durability, and consistent performance. Their pipes are manufactured under strict quality control and conform to international standards.

Available in various sizes and thicknesses, Jindal Hissar Pipes are extensively used in structural applications, irrigation systems, sewage lines, and industrial pipelines. The company’s reputation for producing corrosion-resistant and mechanically strong pipes has made them a preferred choice for engineers and contractors across India and beyond.

Vijay Sales Corporation – Your Reliable Supplier

Finding a trustworthy supplier is crucial when purchasing industrial components. Vijay Sales Corporation has emerged as a reliable name for sourcing MS Pipe Fittings, MS Flanges, and Jindal Hissar Pipes. With a strong presence in the Indian market, Vijay Sales Corporation ensures timely delivery, competitive pricing, and top-notch customer service.

Their catalog features a wide range of products, including precision-engineered pipe fittings and flanges suitable for both small-scale projects and large industrial setups. Partnering with Vijay Sales Corporation ensures you get genuine products with full compliance to industry standards.

MS Pipe Prices Per Kg in 2025

One of the most common questions among contractors and buyers is about the MS Pipe Prices Per Kg. As of 2025, MS Pipe Prices Per Kg vary depending on several factors:

Pipe Thickness and Diameter

Quality and Grade of Steel

Market Demand and Supply

Location and Transportation Costs

Typically, the MS Pipe Prices Per Kg range from ₹55 to ₹75, depending on the above parameters. Branded pipes such as those from Jindal Hissar Pipes may cost slightly more due to their superior quality, but they offer better performance and longer service life, making them a cost-effective investment in the long run.

To get the best deals, it’s advisable to request quotations from reputable suppliers like Vijay Sales Corporation, who offer competitive pricing and bulk discounts.

Why Choose Mild Steel for Your Projects?

Mild steel remains one of the most popular materials for piping systems due to its numerous advantages:

Affordability: Compared to stainless steel or copper, mild steel is budget-friendly.

Ease of Fabrication: MS is easy to weld and shape.

Strength and Durability: Perfect for heavy-duty industrial applications.

Versatility: Suitable for plumbing, structural work, and high-pressure systems.

Whether you’re constructing a high-rise building or setting up an irrigation system, MS Pipe Fittings, MS Flanges, and Jindal Hissar Pipes offer a reliable and long-lasting solution.

Conclusion

In conclusion, investing in the right pipe fittings and components can significantly impact the safety and efficiency of your project. Trusted brands like Jindal Hissar Pipes, coupled with reliable suppliers such as Vijay Sales Corporation, ensure quality and peace of mind. While the MS Pipe Prices Per Kg may fluctuate, the value these products provide is constant.

For engineers, builders, and infrastructure developers looking for dependable piping solutions, MS Pipe Fittings and MS Flanges remain indispensable. Make informed choices, and always opt for quality over short-term savings—it’s a decision that pays off over time

[manufacturing-hub]

MS Pipe Uses & Price in India – Complete Buyer’s Guide [2025]

Introduction

Mild Steel (MS) Pipes are one of the most widely used steel materials in India across sectors like construction, plumbing, automotive, and infrastructure. With 2025 bringing more demand and new pricing trends, knowing the latest MS pipe uses, types, and prices becomes essential for contractors, engineers, and bulk buyers.

In this blog, Udhhyog brings you a comprehensive buyer's guide covering the current MS pipe rate, industry usage, standard sizes, and where to get the best deals in India.

What is MS Pipe?

MS Pipe is made from low carbon steel, offering excellent weldability, moderate strength, and easy fabrication. It is commonly used for carrying water, gas, or structural loads in both residential and industrial projects.

Key Features:

Cost-effective

Durable & rust-resistant (with coating)

Easy to cut, weld, and install

Available in round, square, and rectangular sections

Top Uses of MS Pipe in India

MS Pipes are versatile and suitable for various applications. Here are the top sectors that rely heavily on MS Pipes:

1. Construction Industry

Used as scaffolding, support structures, frames, and beams

Common in building frameworks and trusses

2. Water & Plumbing Systems

Widely used in water distribution systems and sewage pipelines

Compatible with both residential and industrial plumbing

3. Automobile Industry

Used in chassis frames, silencers, and exhaust systems

Lightweight yet strong enough for transportation components

4. Furniture Manufacturing

MS square and rectangular pipes are ideal for steel furniture

Used in modular office setups and fabrication units

5. Agriculture

For irrigation systems, borewells, and greenhouses

Durable for outdoor use with coating

6. Industrial Applications

Used in oil refineries, gas pipelines, and mechanical engineering setups

Suitable for transporting low-pressure fluids

MS Pipe Price in India [2025]

Prices vary depending on the pipe size, thickness, brand, and location. Here's an approximate MS pipe price per kg and meter for 2025:SizeThickness (mm)Price per Kg (INR)Price per Meter (INR)15mm1.6₹55 – ₹65₹40 – ₹6025mm2.0₹58 – ₹68₹55 – ₹7540mm2.5₹60 – ₹70₹90 – ₹12050mm3.0₹62 – ₹72₹110 – ₹140100mm3.2₹65 – ₹75₹180 – ₹220

💡 Prices may vary based on region, transportation cost, and quantity ordered. For bulk rates, connect with trusted dealers like Udhhyog.

Popular Types of MS Pipes

1. MS ERW Pipe

Electric Resistance Welded

Used in structural and engineering applications

2. MS Seamless Pipe

Manufactured without welding; ideal for pressure applications

3. MS Square Pipe

Used for aesthetic furniture and structural purposes

4. MS Rectangular Pipe

Suitable for frames, fencing, and modular works

Standard MS Pipe Sizes & Weight Chart

Nominal BoreOuter Diameter (mm)Wall Thickness (mm)Approx Weight (Kg/m)20mm26.92.01.2040mm48.32.62.8480mm88.93.26.59150mm168.34.015.05

Where to Buy MS Pipes in India?

You can source MS Pipes from:

Local hardware markets (like Chawri Bazar in Delhi, Lohar Chawl in Mumbai)

Authorized suppliers and manufacturers

Online B2B platforms such as IndiaMART, TradeIndia

Directly from Udhhyog – a verified and experienced supplier offering MS Pipes in bulk across India

🏷️ Looking for the best MS pipe deal? Contact Udhhyog for wholesale pricing and custom orders.

Tips to Choose the Right MS Pipe

Check ISI Certification: Ensure quality and safety standards

Consider Pipe Thickness: Match it with your load/pressure requirements

Order in Bulk: Saves on per kg and per meter cost

Choose Coated Pipes: For corrosion resistance in outdoor use

Frequently Asked Questions (FAQs)

✅ Is MS pipe rustproof?

MS pipe is prone to rust but can be galvanized or painted for corrosion resistance.

✅ What is the full form of MS in MS Pipe?

MS stands for Mild Steel.

✅ Which is better – MS ERW or Seamless?

MS Seamless is better for high-pressure systems, while ERW is cost-effective for general applications.

✅ What is the current MS pipe rate per kg in Delhi?

It ranges from ₹58 to ₹72 per kg depending on the size and thickness.

Conclusion

MS Pipes remain a cost-effective, reliable, and versatile material choice in 2025 for various industries. Whether you’re building infrastructure, managing water flow, or setting up modular designs, MS pipes deliver performance and affordability.

For bulk orders or dealer-level pricing, Udhhyog is your trusted partner for MS pipes and fittings across India.

[msmachining1]

Stretch Forming Process: Revolutionizing Metal Fabrication

In the ever-evolving landscape of metal fabrication, innovation plays a pivotal role in enhancing efficiency, accuracy, and overall quality. One such transformative technique that has significantly influenced modern metalworking is the stretch forming process. This advanced method has redefined how manufacturers shape and form complex components, particularly in aerospace, automotive, architecture, and other precision-driven industries. Among the leaders in this domain is MS Machining, known for delivering cutting-edge solutions that embrace the power of stretch forming and its specialized variant—stretch roll forming.

What is Stretch Forming?

The stretch forming process is a metal forming technique in which a sheet or extrusion of metal is stretched and simultaneously bent over a die to form a specific contour or shape. Unlike conventional bending, where metal is pressed into a form, stretch forming ensures that the metal is under tension throughout the process. This results in a smoother, more uniform curvature, free from wrinkles, buckling, or internal stress concentrations.

This technique is especially suitable for producing large and complex contoured parts that demand high accuracy and aesthetic finish, making it ideal for aircraft skins, building facades, automotive panels, and even modern art installations.

How the Stretch Forming Process Works

The stretch forming process can be broken down into several key stages:

Clamping: The metal sheet or extrusion is securely clamped at both ends using powerful hydraulic jaws.

Tensioning: The material is then pulled to a specified elongation, applying precise tensile forces.

Forming Over Die: While under tension, the metal is gradually wrapped over a die or form block.

Release and Springback: Once the shape is formed, the metal is released. The process is designed to account for minor springback (elastic recovery), ensuring the final shape matches design specs.

The result is a component with high structural integrity, dimensional stability, and excellent surface quality.

What is Stretch Roll Forming?

A specialized version of the stretch forming process is stretch roll forming. This technique combines the stretching action with the rolling process to gradually form the metal into a desired shape over a series of rolls, rather than a single die.

Stretch roll forming is particularly effective for producing long, continuous shapes with uniform cross-sections, such as curved beams, structural supports, and paneling for aerospace or construction applications. It provides added versatility in forming intricate curves and variable radii without the need for multiple setups or complex tooling changes.

Advantages of Stretch Roll Forming

The advantages of stretch roll forming are numerous and contribute significantly to its growing popularity in the fabrication sector:

Superior Accuracy: The process offers excellent control over the shape and curvature of the final part, minimizing errors and material waste.

Improved Surface Finish: Since the metal is formed under tension, it reduces the chances of wrinkles or buckling, delivering a clean and smooth finish suitable for visible applications.

Cost Efficiency for Long Runs: Especially for projects requiring long and consistent parts, stretch roll forming reduces material waste, increases throughput, and minimizes rework.

High Repeatability: The process provides consistent results across multiple parts, which is critical in industries like aerospace and automotive.

Material Flexibility: Compatible with a wide range of materials, including aluminum, steel, titanium, and high-strength alloys.

Reduced Tooling Costs: Since fewer tools are required compared to traditional stamping or press forming, it leads to significant savings in both cost and production time.

Lightweight Component Fabrication: Ideal for industries aiming to reduce weight without compromising strength—particularly relevant in aerospace and transportation.

Applications of the Stretch Forming Process

Thanks to its precision and versatility, the stretch forming process finds applications across a variety of sectors:

1. Aerospace Industry

Aircraft fuselages, wing panels, window frames, and engine components often demand seamless curves and stress-free surfaces. Stretch forming ensures dimensional precision and load-bearing strength essential for flight safety.

2. Automotive Manufacturing

For sleek, aerodynamic car body panels, hoods, and trim, stretch forming offers a wrinkle-free and high-quality finish. The ability to form both aesthetic and functional shapes with minimal tooling makes it a top choice in the automotive industry.

3. Architecture and Construction

Metal panels used in modern buildings for aesthetic facades or structural purposes are frequently formed using this technique. Stretch forming enables complex, artistic curves that define contemporary architectural styles.

4. Railway and Transportation

Trains, subways, and trams utilize stretch-formed components for their lightweight strength and resistance to fatigue.

5. Energy and Power

From wind turbines to solar panel frames, stretch forming ensures reliable, strong, and lightweight components that contribute to efficient energy systems.

MS Machining: Pioneering Precision Fabrication

MS Machining has established itself as a leader in precision metal fabrication services. With a strong commitment to quality, innovation, and customer satisfaction, the company has embraced the power of stretch forming and stretch roll forming to deliver high-performance components across demanding industries.

By leveraging state-of-the-art equipment and a skilled team, MS Machining ensures each component meets the most rigorous standards. Whether you require complex aerospace structures or custom-formed architectural panels, MS Machining provides end-to-end solutions tailored to your needs.

To learn more about their stretch forming capabilities, visit: https://ms-machining.com/stretch-forming-process/

Why Choose Stretch Forming Over Traditional Methods?

Traditional forming methods like stamping or press bending can struggle with producing complex curves, especially in large parts. They often lead to issues such as:

Wrinkling or tearing

Uneven material distribution

Poor repeatability

High tooling costs

In contrast, the stretch forming process offers a controlled and precise solution. When integrated with stretch roll forming, the benefits multiply, especially for long and continuous production. It strikes the perfect balance between strength, aesthetics, and efficiency—qualities crucial for modern engineering.

Final Thoughts

The stretch forming process and its advanced variant, stretch roll forming, are revolutionizing the world of metal fabrication. They provide unmatched precision, quality, and efficiency—factors that are critical in industries driven by innovation and performance.

With companies like MS Machining at the forefront, businesses can now access top-tier fabrication capabilities that push the boundaries of design and functionality. As technology continues to evolve, stretch forming is poised to remain a cornerstone technique in the next generation of metalworking.