#uv vis sensor

[kimberlabtron]

Analytical HPLC-A7835 system is equipped with a flow rate range of 0.0001 to 10 ml per minute. Integrated with a single and dual wavelength UV-Vis detector with a range of 190 to 800 nm that analyzes sample’s absorption at different wavelengths and a high pressure pump providing continuous consistent flow. Built in column heater provides reproducible retention time.

[circumlocutive]

Fuckin

Semi masturbatory caffeinated ramble reflecting on skills acquired in my PhD

Thinking about how broad and interdisciplinary my project is and the kinda of things I have to be familiar with or an expert in. I get down on myself sometimes for progress but looking at all the shit I've learned.... Without formal classes or a senior grad student or (for the majority of it) no post doc. And a PI who can't help bc she's really a business lady at this point not a professor. Maybe shouldn't be hard on myself?

Like. I did completely different projects in undergrad (biotech/proteins/genetics/regenerative medicine, advanced manufacturing/composite fabrication/CNC/welding/process statistics, translational neuropharma studies of addiction/rodent handling and operant training and behavioral video analysis/neural tissue slicing n staining/hand making neuroelectrodes for implantation, design and fabrication of impedance spectroscopy based electrochemical sensors/automation of sensor fab and use w a micro fluidic flow cell)

Like. Since I've started I've learned:

- how to do multi-step air-free water-free chemical synthesis (with glove box and schlenk line) and purification (extraction, filtration, chromatography) of light sensitive amphiphiles (extra tricky)

- how to get and read NMR even for massive fucking molecules and interpret weird peaks (I can casually see if I've got water or any of my common solvents contaminating the spectra without referencing a table at this point)

-how to fucking take down and set up and fix everything in our chemical synthesis lab (because we moved and all our shit was abused for years) and all the intricate non-unified and sometimes conflicting rules for hazardous chemical storage

- the theory/math and how to actually use the equipment to do optoelectronic/photophysical characterization (e.g. using the UV vis spectrometer and writing python to convert the data files into readable tables and figures, learning theory so I can develop equations to relate photon flux to change in absorbance of an actinometer ((light sensitive molecule with a consistent quantum yield)) then obtain quantum yield of charge transfer in a different molecule but same setup, how to use the fluorimeter and get intensity and quantum yield, how to set up lasers and LEDs, what cuvettes to use, how to get fluorescence lifetimes or take two photon excitation data, how to spin coat wafers n do thin film transistor studies), more theory about how photo induced electron transfer voltage sensors work and the importance of angle of insertion on sensitivity (and how to measure it with polarization microscopy) other voltage sensing dye mechanisms like FRET or electrochromic dyes and why to use intensity vs lifetime vs whatever when interpreting signal readouts and the extrinsic and intrinsic factors affecting that interpretation.

- how to do vesicle fabrication and immobilize for imaging, typical membrane compositions and dynamics (e.g. phase orders depending on cholesterol concentrations, significance of packing parameters to membrane organization), measurimg particle radius with DLS, controlling inner cargo and gradients over a membrane by manipulating the bulk solution, the interplay between non radiative decay and the stiffness of the membrane microenvironment around a fluorophore

- the math and bio behind electrophysiology/advanced neuroscience pertaining to modeling and calculating and quantifying signalling/equivalent RC circuit analysis, what spatiotemporal requirements there are for studying this shit <- though this was through a class, not self taught

- I already had cell culture experience and did some adherent and suspended cultures, some live dead imaging assays, etc, but I've learned new facets like how to go about picking electrically exciteable lines (ease of growing? What media requirements? time to multiply and differentiate? What agent to differentiate? How to induce firing without a patch clamp?) and troubleshooting uptake/optimizing staining and imaging parameters (what media or buffer for growth vs staining vs washing vs imaging? Can it have serum? Can it have calcium and magnesium? What salts, how is it buffered, whats the osmolarity I can get away with? What concentrations work for what # of cells? What dilution factors? Do I need to admix equivolumes of dye solution and cell solution? Do I prep the organic solvent+ dye + aqueous solution with sonication or filtration or vortexing before mixing? Is DMSO or ethanol or DMF a better organic for dispersal or biocompatibility? What's the Ideal incubation time for uptake and viability? How long before I absolutely need to image or the dye gets internalized? If it's retained long, how many days could I image for?) for my tricky aggregation-prone non-diffusive thermodynamically-partitioned dye. Also stuff like what commercially available live imaging dyes can I compare to or complement my visualizations with or use for colocalization studies (other lipophilic membrane dyes that insert in the bilayer with preferences for diff order regions? What about comparison with surface adhering dyes like WGA-iFluor that bind surface sugars, to show that our dye can laterally diffuse to areas blocked by cell-cell contacts?), what fluorescence specific parameters do I need to characterize (photo toxicity/photo bleaching time?)

And then there's other shit I've picked up like. Idk. How to make orders in the particular institute I'm in. Better citation managers and ways to search literature. Recognizing what groups and journals and conferences are major players in the fields I'm touching. Getting comfy presenting my shit.

I need to learn a little more about microscopy (especially FLIM and how to build a polarizer module into the scope we have for polarization microscopy), and a little more about the state of the art for voltage dyes and live-imaging dye characterization but man. I think I'm getting somewhere. I'm starting to know enough to see the end of this project and pick my directions moving forward and argue when my PI is wrong

Gahhhhhh

[comfortflowtech]

Innovations in Indoor Climate Control

Maintaining a comfortable indoor environment is more important than ever, especially with rising global temperatures and shifting weather patterns. As technology advances, indoor climate control systems are becoming smarter, more efficient, and more sustainable. This article explores the latest innovations in indoor climate control, from intelligent thermostats to energy-saving HVAC technologies that are transforming how we heat, cool, and ventilate our spaces.

What is Indoor Climate Control?

Indoor climate control refers to managing the temperature, humidity, and air quality within a building. Traditional systems relied heavily on manual thermostats and basic HVAC units. However, modern innovations are introducing smart automation, energy efficiency, and enhanced user comfort.

Smart Thermostats and AI Integration

The Rise of Intelligent Thermostats

Smart thermostats have revolutionized the way homeowners and businesses control indoor environments. Devices like the Nest, Ecobee, and Honeywell Smart Thermostats allow users to set schedules, monitor energy use, and adjust settings remotely via mobile apps.

These thermostats learn user behaviors over time and make automatic adjustments. For example, if the thermostat detects that no one is home, it can reduce energy use by adjusting the temperature accordingly.

AI and Machine Learning in Climate Control

One of the most impressive innovations in indoor climate control is the integration of Artificial Intelligence (AI). AI-powered systems can analyze weather forecasts, occupancy data, and energy consumption trends to optimize indoor conditions automatically. This not only improves comfort but significantly reduces energy waste.

Zoned Climate Control Systems

What is Zoned HVAC?

Zoned HVAC systems divide a building into multiple areas (zones), each with its own thermostat. This allows for personalized temperature settings in different parts of the house or office.

For instance, the bedroom can be kept cooler at night while the living room stays warmer during the day. This precise control enhances comfort and helps reduce energy bills.

Benefits of Zoning Technology

Energy efficiency: Avoids heating or cooling unused rooms.

Personalized comfort: Each room occupant can enjoy their preferred temperature.

Reduced wear and tear: The HVAC system doesn’t have to work as hard, extending its lifespan.

Eco-Friendly HVAC Technologies

Use of Renewable Energy

Modern HVAC systems are being designed to integrate with renewable energy sources like solar and geothermal. Geothermal heat pumps, for example, utilize the stable underground temperature to provide efficient heating and cooling, even in extreme weather conditions.

Inverter Technology in Heat Pumps

Inverter-driven heat pumps adjust their motor speed based on current demand rather than running at full power all the time. This results in:

Lower energy usage

Less noise

Greater temperature stability

These systems are now widely used in modern air conditioning units and have become a core part of innovations in indoor climate control.

Air Purification and Ventilation Advances

Indoor Air Quality (IAQ) Sensors

Indoor air pollution can be up to five times worse than outdoor air pollution. Recent innovations include IAQ sensors that detect pollutants like carbon dioxide (CO2), volatile organic compounds (VOCs), and fine particulate matter (PM2.5). These sensors communicate with HVAC systems to adjust airflow and filtration automatically.

UV Light and HEPA Filters

Advanced HVAC systems are incorporating:

UV-C lights: Kill bacteria, mold, and viruses in the ductwork.

HEPA filters: Capture 99.97% of airborne particles, improving overall air quality.

These innovations are especially important for people with allergies or respiratory conditions.

Internet of Things (IoT) Integration

Smart Homes and Climate Control

IoT-enabled climate systems allow for seamless integration with other smart home devices. Voice commands via Alexa, Google Assistant, or Siri can be used to change settings, and climate control can be linked with security systems or lighting.

Real-Time Monitoring and Alerts

IoT devices provide real-time data and alerts about:

Air filter status

Unusual temperature fluctuations

Humidity levels

System performance

This helps homeowners address issues proactively, reducing maintenance costs.

Mobile Apps and Remote Control

Climate Management on the Go

One of the most user-friendly innovations in indoor climate control is the ability to manage your indoor environment remotely. Mobile apps connected to smart thermostats and HVAC systems let users:

Adjust temperatures

Set vacation modes

Monitor energy usage

Receive maintenance reminders

This adds convenience and allows for more efficient use of energy.

Smart Windows and Building Materials

Electrochromic Glass and Smart Blinds

Smart windows, also known as electrochromic glass, can automatically tint based on sunlight intensity. This reduces the need for air conditioning on sunny days. Combined with automated blinds and window sensors, these systems help regulate indoor temperature without relying solely on HVAC systems.

Insulated Building Materials

New materials like phase change materials (PCMs) and vacuum insulated panels (VIPs) store and release heat slowly, helping maintain indoor temperatures and reducing the load on heating/cooling systems.

Predictive Maintenance and System Automation

Condition-Based Maintenance

Instead of relying on periodic checks, predictive maintenance uses sensors and software to monitor system health in real time. If a component is likely to fail or requires service, users are notified before the issue worsens.

Automation of Climate Systems

Automated systems that can manage climate conditions based on data from sensors, user habits, and weather reports are becoming increasingly popular in both residential and commercial buildings. Automation ensures consistency and reduces human error in energy management.

Integration with Building Management Systems (BMS)

Commercial Applications

In large buildings, innovations in indoor climate control are integrated into sophisticated BMS. These systems control HVAC, lighting, security, and fire safety in one platform. Features include:

Centralized monitoring

Energy usage analytics

Automated system optimization

This approach increases operational efficiency and contributes to achieving sustainability goals.

Future Trends in Indoor Climate Control

Green Buildings and LEED Certification

More buildings are now being designed to meet green building standards such as LEED (Leadership in Energy and Environmental Design). These standards emphasize:

Reduced energy consumption

Use of non-toxic materials

Efficient indoor climate control systems

Smart Fabrics and Wearables

Emerging research in smart textiles suggests that future innovations might involve clothing that adjusts to temperature, reducing the need for high-energy indoor systems. Wearable devices could also sync with home systems to adjust climate settings based on biometric feedback.

Conclusion

The field of innovations in indoor climate control is evolving rapidly, driven by a need for comfort, energy efficiency, and sustainability. From AI-powered thermostats and zoned HVAC systems to eco-friendly technologies and IoT integration, these advancements are making our indoor environments smarter and healthier.

Investing in modern indoor climate solutions not only enhances quality of life but also contributes to long-term savings and environmental responsibility. As technology continues to progress, the future of indoor climate control looks cooler, cleaner, and much more intelligent.

[elmalo8291]

Project Iron Spine: Technical Blueprint

Concept Summary: Iron Spine is a lifelong, bio-integrated spinal augmentation unit designed to interface with the human nervous system using ionic and laser-based micro-needle technology. The system interprets brain signals non-invasively and assists with physical support, nerve stimulation, and strength augmentation. It draws inspiration from the durability of early twentieth-century mechanical design while leveraging cutting-edge medical, AI, and materials science advancements.

I. Structural Framework

Material: Aerospace-grade titanium alloy chassis

Support Frame: Carbon-composite skeletal harness with flexible segments and vibration-damping micro-pivots

Surface Shell: Graphene-infused smart fabric over memory metal honeycomb

Function: Lightweight, corrosion-resistant, shock-absorbent, long-term biocompatibility

II. Sensory & Needle Interface

Needles: Medical-grade laser-sharpened ionic micro-needles

Function: Penetrate dermal layer for neural stimulation or suppression without tissue damage

Sterilization: Self-cleaning ports using UV-C micro-pulse tech; retractable needle array

Infection Control: Antibacterial nano-coating around all ports and skin contact points

III. Comfort and Environmental Control

Temperature Regulation: Phase-changing thermogel padding

Sweat Management: Breathable, moisture-wicking graphene mesh lining

Adaptive Fit: Muscle-tracking smart-fabric straps with microservo adjusters

IV. Neural Interface System

Signal Interpretation: Non-invasive dry EEG sensors on upper neck and scalp perimeter

AI Core: Onboard redundant learning model interprets brain-to-spine electrical signals

AI Safety Layer: Fail-safes for nerve misfire prevention and automatic shutoff under stress

Interface Port: Optional external plug-in for diagnostics and software updates

V. Mobility and Strength Augmentation

Actuation: Artificial muscle fibers along spinal channel augment movement and strength

Load Bearing: Dynamic load distribution module for spinal pressure relief

Balance Assist: Internal gyro-sensor array linked to AI for stability monitoring

VI. Power and Energy

Primary Source: Solid-state lithium-ceramic power cell (20-year life)

Backup System: Kinetic energy recovery loop (walking, movement) and solar skin panels

Efficiency Management: Smart power routing and auto-shutdown of non-critical systems

VII. Durability and Longevity

Philosophy: Built to outlast its wearer if maintained

Maintenance: Modular internal units with user-friendly access points

Diagnostics: AI-run integrity scans with manual override

Design Principle: Repairable, not disposable. Parts are standardized and field-serviceable.

VIII. Optional Modules and Future Add-ons

Wireless Comms: Low-range neural command module for use with external devices

Emergency Protocol: Shock-dampening fail-safes, fall detection, and SOS beacon

Integrated Tools: Micro-med modules for basic injections, localized numbing, etc.

Aesthetic Philosophy: Steampunk-meets-space-age—visible gears, elegant form, and a timeless, practical beauty. A living relic that performs like a machine from the future, but feels like it came from the hands of an artisan.

Status: In Conceptual Prototyping Phase Ready for refinement with biomechanics experts, AI interfacing engineers, materials scientists, and medical device regulators.

Owner: [User] Codename: Iron Spine Initiative

[healthcare-updates-with-sns]

Process Analytical Technology Market: Industry Trends and Forecast 2024-2032

The Process Analytical Technology Market was valued at USD 3.36 billion in 2023 and is projected to reach USD 6.89 billion by 2031, growing at a CAGR of 9.3% over the forecast period. This rapid growth is being propelled by increasing demand across pharmaceutical, biotechnology, and food & beverage sectors for efficient, real-time analytical techniques that enhance quality assurance and streamline manufacturing processes.

Market Overview

Process Analytical Technology (PAT) refers to the systems used to design, analyze, and control manufacturing through timely measurements of critical quality and performance attributes. Its application allows for real-time monitoring, reduced production cycle times, minimized waste, and improved overall efficiency, making it a crucial component in modern manufacturing ecosystems.

Get Free Sample Report @ https://www.snsinsider.com/sample-request/3957

Regional Analysis

North America currently leads the global PAT market, thanks to a robust pharmaceutical industry, early technology adoption, and strong regulatory backing.

Europe follows closely, driven by advanced research infrastructure and increasing investments in biotechnology.

Asia-Pacific is expected to witness the fastest growth during the forecast period due to expanding pharmaceutical manufacturing capabilities in countries like China and India, along with favorable government policies promoting quality and safety.

Latin America, Middle East, and Africa are emerging markets with growing industrial sectors and gradual adoption of PAT tools.

Market Segmentation

By Product & Services:

Products (Analyzers, Sensors, Samplers)

Software and Services

By Measurement Technique:

Spectroscopy (NIR, Raman, UV-Vis, etc.)

Chromatography

Particle Size Analysis

Capillary Electrophoresis

Others

By End-User:

Pharmaceutical Manufacturers

Biotech Firms

Food & Beverage Companies

Chemical and Petrochemical Industries

KEY PLAYERS:

The key market players are Focused Photonics Inc., ABB Ltd, Mettler Toledo, Endress & Hauser AG, Emerson Electric Co., Extrel CMS LLC, Bruker Corporation, Hach Company, Siemens AG, Horiba Ltd & other players.

Key Highlights

Rising demand for consistent product quality in pharmaceutical and biopharmaceutical manufacturing.

Increasing emphasis on regulatory compliance and real-time product quality monitoring.

Technological advancements in spectroscopy and sensor technologies.

Growth of Industry 4.0 and smart manufacturing practices driving PAT adoption.

Integration of PAT with automation and artificial intelligence for process optimization.

Future Outlook

The future of the Process Analytical Technology market looks promising, with digital transformation playing a central role. As industries move toward greater automation and predictive analytics, the role of PAT will be further enhanced. Its integration with machine learning and AI is anticipated to offer unprecedented control over production environments, reduce human intervention, and improve regulatory compliance. Moreover, the shift toward continuous manufacturing over batch processing is expected to increase the reliance on real-time analytical technologies.

Conclusion

The Process Analytical Technology Market is on an upward trajectory, driven by its ability to optimize production, improve quality, and reduce operational costs. As global industries continue to emphasize quality control and efficiency, PAT is set to become a cornerstone of modern manufacturing strategies across multiple sectors.

Contact Us: Jagney Dave - Vice President of Client Engagement Phone: +1-315 636 4242 (US) | +44- 20 3290 5010 (UK)

Other Related Reports:

Cell Viability Assay Market

Medical Power Supply Market

Post Traumatic Stress Disorder Treatment Market

MRI Guided Neurosurgical Ablation Market

[engineering-materials]

Key Quartz Glass Products

A. Quartz Tubes

Quartz tubes are cylindrical structures used in high-temperature and corrosive settings:

Semiconductor Industry: Serve as reaction chambers in diffusion furnaces for doping silicon wafers with boron or phosphorus.

Lighting: Core components of infrared heating lamp tubes (e.g., industrial drying systems) and ultraviolet germicidal lamp tubes (water/air purification).

Chemical Processing: Transport aggressive media like chlorine gas or sulfuric acid.

B. Quartz Plates

Flat, polished panels with applications in:

Optics: Windows for UV lithography machines and laser systems.

Solar Energy: Protective covers for photovoltaic panels, enhancing UV light utilization.

C. Quartz Rods

Cylindrical solid bars utilized for:

Laboratory Tools: Stirrers in high-temperature molten salt experiments.

Fiber Optics: Preforms drawn into low-loss optical fibers.

D. Quartz Crucibles

Containers designed for melting and crystallizing materials:

Solar Silicon Production: Hold molten polysilicon at 1,400°C to grow monocrystalline ingots.

Pharmaceuticals: Synthesize high-purity active ingredients without contamination.

E. Quartz Instruments

Custom-designed apparatus such as:

Spectrophotometer Cells: Enable UV-Vis spectroscopy in chemical analysis.

Thermocouple Protection Sheaths: Shield sensors in molten metal processing.

Quartz Ingots

F. Quartz Ingots

Raw material blocks for machining precision components:

Optical Lenses: Ground into lenses for deep-UV lithography systems.

Semiconductor Wafers: Sliced into substrates for MEMS (micro-electromechanical systems).

G. Quartz Crystal Singing Products

Artistic and functional devices leveraging quartz’s piezoelectric properties:

Resonators: Frequency control in watches, radios, and IoT devices.

Sonic Cleaners: Generate ultrasonic waves for industrial part degreasing.

H. Infrared Heating Lamp Tubes

Quartz tubes optimized for IR radiation:

Food Industry: Dry and sterilize packaging materials.

Automotive: Cure coatings on car bodies.

I. Ultraviolet Germicidal Lamp Tubes

Engineered to emit UV-C (254 nm) light:

Healthcare: Disinfect surgical instruments and hospital air.

Wastewater Treatment: Eliminate pathogens without chemicals.

[tecnoandroidit]

Le tende a rullo oscuranti sono una delle soluzioni più efficaci usate nelle abitazioni moderne. Esse vengono adottate di frequente per garantire privacy, migliorare il comfort termico e proteggere dagli sguardi esterni. Sono ideali per chi desidera un ambiente controllato, dove la luce viene gestita in modo preciso e senza limiti. Parlando di questo prodotto, la SwitchBot Roller Shade risulta essere sicuramente una delle opzioni più innovative presenti sul mercato. In quanto in grado di integrare funzionalità smart, efficienza energetica e design moderno. In questo articolo esploreremo nel dettaglio le caratteristiche di questo prodotto. Il suo funzionamento, i vantaggi e gli svantaggi. Ma soprattutto, come possa trasformare qualsiasi posto in un ambiente confortevole e tecnologicamente avanzato. Cosa si trova nella confezione Al momento dell’acquisto, il pacco consegnato include tutto il necessario per installare e utilizzare la SwitchBot Roller Shade in modo semplice ed immediato. All'interno della confezione è presente il motore smart, progettato per essere fissato direttamente alla tenda a rullo esistente. Insieme al supporto di montaggio che ne garantisce la stabilità. Vi è anche un cavo di ricarica per la batteria integrata. In grado di offrire un’autonomia prolungata. Oltre ad un manuale di istruzioni dettagliato per la guida all’installazione. A seconda del modello scelto, potrebbe essere incluso anche un telecomando per il controllo manuale. In alcuni casi, invece, è possibile trovare un sensore di luce. Capace di regolare l’apertura e la chiusura in base alla luminosità dell' ambiente. Tutti i componenti sono realizzati con materiali resistenti e progettati per durare nel tempo. SWITCHBOT ROLLER SHADE: DESIGN E COSTRUZIONE La SwitchBot RollerShade è stata progettata per combinare estetica e funzionalità. Infatti, si adatta perfettamente a qualsiasi ambiente e stile di arredamento. Proprio grazie al suo design semplice e moderno. La sua struttura compatta permette un’installazione semplice e veloce. Il cuore della tenda è sicuramente il rullo e il suo funzionamento. Il quale rappresenta l’elemento centrale del sistema di apertura e chiusura. Questo componente generalmente è realizzato in alluminio anodizzato. Un materiale scelto per la sua leggerezza e resistenza alla corrosione. Ciò le garantisce una maggiore longevità e un aspetto sempre impeccabile anche nel corso del tempo. La sua struttura cilindrica è progettata per ridurre l’attrito durante l'avvolgimento del tessuto. Assicurando così un movimento estremamente fluido e silenzioso. Il rullo è regolabile. Si adatta infatti a qualsiasi finestra con una larghezza compresa tra i 58cm e i 185cm. Dunque è compatibile con diverse tipologie di infissi. A seconda delle esigenze di ognuno, è possibile gestire l’apertura e la chiusura con precisione. Permettendo di filtrare la luce in modo personalizzato. Alcuni modelli offrono anche la possibilità di regolare la tensione della tenda. Evitando così pieghe o allentamenti indesiderati. Il materiale utilizzato è un altro elemento caratterizzante ed è disponibile in diverse varianti. Tra cui tessuti con isolamento termico, protezione UV o oscuramento totale. Assicurano tutti un'ottima resistenza all’usura e una perfetta gestione della luce. Poiché realizzati con tessuti di alta qualità come poliestere ad alta densità o misto lino. È possibile anche scegliere tra diverse opzioni di trasparenza. Dai tessuti completamente oscuranti a quelli filtranti. L’intero sistema è progettato per garantire una manutenzione minima. In quanto, come detto, i materiali sono appositamente scelti per evitare che si deformino nel tempo. In più non richiedono particolari attenzioni nemmeno per la pulizia. INSTALLAZIONE E STRUMENTI NECESSARI Il montaggio della SwitchBot Roller Shade è un processo relativamente semplice e alla portata di tutti. Il tempo richiesto dipende dall’esperienza personale, ma in genere non supera i 30-45 minuti. Il procedimento prevede pochi passaggi fondamentali. Ovvero il fissaggio dei supporti a parete o a soffitto, l’inserimento del rullo con il tessuto e il collegamento del motore o del sistema di controllo. Per un'installazione corretta è fondamentale avere a disposizione alcuni strumenti di base. Come un trapano per praticare i fori nei punti di fissaggio, un cacciavite per serrare le viti di supporto e una livella per assicurarsi che la tenda sia perfettamente allineata. È consigliabile anche un metro a nastro. Per misurare con precisione la distanza tra i supporti e garantire una perfetta simmetria. Una volta posizionati i supporti di fissaggio e inserito il rullo, è possibile testare il meccanismo per verificare che la tenda scorra in modo fluido. Se la versione acquistata è motorizzata, sarà necessario completare la configurazione con l’app SwitchBot. APP E FUNZIONAMENTO La SwitchBot Roller Shade può essere controllata in diversi modi. Basta installare l'app SwitchBot oppure utilizzare il telecomando. Sono previsti anche comandi vocali tramite assistenti come Alexa o Google Assistant. Oltre che un sensore di luce che regola l’apertura e la chiusura in base alla luminosità esterna. Il telecomando incluso è molto intuitivo e facile da usare. Esso comunica senza fili con il motore integrato nel rullo della tenda. Permettendo di alzarla o abbassarla con un semplice tocco di un pulsante. Offre poi anche la possibilità di memorizzare alcune impostazioni. Così che possano essere richiamate rapidamente senza dover impostarle di nuovo ogni volta, quando se ne ha bisogno. Il metodo principale però resta sicuramente l’app-SwitchBot. Disponibile sia per dispositivi Android che iOS e scaricabile gratuitamente. L’installazione dell’applicazione è semplice ed immediata. Una volta completata, è sufficiente creare un account e seguire la procedura guidata per associare la tenda al sistema. Il collegamento avviene tramite Bluetooth. Oppure, se si dispone dell’hub SwitchBot, anche con il Wi-Fi. Questa piattaforma virtuale rappresenta il centro di comando della tenda. Offre infatti numerose funzionalità per poterla adattare alle proprie esigenze. Attraverso l’interfaccia intuitiva, è possibile impostare la tenda in varie posizioni. Ma anche programmare timer per automatizzare l’apertura e la chiusura in base agli orari della giornata. Un’opzione molto utile è anche la possibilità di sincronizzare la tenda con il ciclo del sole. Ovvero regolando automaticamente il livello di apertura in base all’orario e alla luminosità esterna. La compatibilità con gli assistenti vocali come Alexa, Google Assistant e Siri permette poi di gestire tutto il meccanismo semplicemente tramite la voce. L' interazione, in questo modo, diventa ancora più pratica ed immediata. Oltre ai controlli di base, è possibile monitorare lo stato della tenda, verificare il livello di batteria del motore (se presente) e ricevere notifiche relative al suo funzionamento. Tale versatilità rende la SwitchBot RollerShade una soluzione estremamente pratica e intelligente. In grado di adattarsi perfettamente alle esigenze quotidiane di ogni individuo migliorando il comfort e l’efficienza energetica della casa. AUTONOMIA E ENERGIA SOSTENIBILE Un altro aspetto interessante della Roller Shade è la sua autonomia. La quale gioca un ruolo fondamentale nel determinare la praticità e l’efficienza del dispositivo. Questa tenda motorizzata infatti, è progettata per essere il più possibile autonoma. Essa è alimentata da una batteria ricaricabile agli ioni di litio, una delle tecnologie più avanzate nel campo delle batterie ricaricabili. In quanto molto apprezzate per la lunga durata e per la capacità di gestire un numero elevato di cicli di ricarica. In media, una batteria di questo tipo ha una vita utile di circa 3-5 anni. Un periodo sufficiente per garantire un utilizzo prolungato senza necessità di sostituirla frequentemente. Questo tipo di batterie sono particolarmente efficienti dal punto di vista energetico. Poiché consumano meno energia rispetto ad altre tipologie, godono quindi di un’autonomia ancora più avanzata. La durata della batteria è proprio una delle caratteristiche che rendono la SwitchBot particolarmente comoda. Con una sola carica completa, la tenda è in grado di funzionare per un massimo di 8 mesi. Persino in condizioni di utilizzo normale, ad esempio aprendola e chiudendola almeno una o due volte al giorno. La sua autonomia però può variare leggermente in base a diversi fattori. Come la frequenza di utilizzo, il tipo di tessuto della tenda e le condizioni ambientali, come la temperatura. In ambienti particolarmente caldi o freddi, ad esempio, la batteria potrebbe scaricarsi più velocemente. Quando arriva il momento della ricarica l’operazione è facile e rapida. Può infatti essere utilizzato un semplice cavo USB, che consente di collegarla a una fonte di alimentazione. Una ricarica completa richiede circa 2-3 ore. Non è necessario rimuovere la tenda dal supporto per effettuare questa operazione. L' app e il telecomando forniscono sempre informazioni precise sullo stato della batteria, per sapere sempre quando è arrivato il momento di ricaricare. In ogni caso, si consiglia la ricarica durante la notte. Così che la mattina seguente il dispositivo possa essere già pronto per un nuovo funzionamento. Ma non è ancora tutto. Poiché un’altra caratteristica ancora più innovativa riguarda la possibilità di ricaricarla utilizzando l'energia solare. Infatti, utilizzando un pannello solare opzionale, è possibile ridurre al minimo la necessità di ricariche manuali. Rendendo la tenda ancora più autonoma e sostenibile. Il pannello solare è progettato per raccogliere la luce del sole durante il giorno e trasferirla alla batteria. Essa si mantiene quindi costantemente carica. Utilizzando i pannelli solari si riduce quindi la dipendenza dalla rete elettrica. Ma si contribuisce anche a un consumo energetico più ecologico e sostenibile. Riducendo l'impronta ecologica complessiva della casa. Manutenzione e Pulizia La manutenzione e la pulizia della SwitchBot sono necessarie per garantire un funzionamento ottimale e prolungato della tenda nonostante il trascorrere del tempo. Essa richiede operazioni semplici e poco invasive. Il motore e i componenti elettronici sono protetti in una custodia resistente, quindi non richiedono particolari attenzioni. Ma la parte più importante da curare è la tenda stessa. Quest' ultima generalmente è realizzata in tessuti resistenti e facili da pulire. Ma è sempre consigliato fare attenzione al materiale utilizzato. Poiché ogni tessuto ha specifiche esigenze di manutenzione. In linea di massima, è possibile pulire la tenda con un panno morbido e asciutto per rimuovere polvere e sporco. Se necessario, si può usare un panno umido con una soluzione di acqua tiepida e detergente delicato. Evitando però di bagnare eccessivamente il tessuto. In quanto potrebbe danneggiare il materiale o compromettere il funzionamento del motore. È fondamentale evitare l'uso di solventi aggressivi o prodotti chimici che potrebbero compromettere l’integrità del tessuto o delle parti elettroniche. Ancora, è importante pulire regolarmente il motore e l'area circostante. Soprattutto se la tenda è installata in un ambiente polveroso o in zone con umidità elevata. Un'accurata pulizia delle ventole di ventilazione e dei componenti esterni del motore aiuterà a prevenire il surriscaldamento e a mantenere l'efficienza del dispositivo. Da non trascurare nemmeno la pulizia del pannello solare. Bisogna infatti sempre assicurarsi che sia pulito e privo di detriti che possano impedire la corretta ricarica. PREZZO E CONCORRENZA La SwitchBot Roller Shade rappresenta senz'altro un prodotto di alta qualità nel settore delle tende motorizzate. Il suo prezzo varia a seconda del modello e delle dimensioni. Ma in media si aggira intorno ai 139-149€ per una tenda di dimensioni standard. Si tratta di un ottimo rapporto qualità-prezzo. Soprattutto se consideriamo che molti prodotti simili sul mercato possono costare molto di più. Il prezzo può variare a seconda dei negozi e delle eventuali offerte promozionali. Ma acquistarla direttamente sullo store SwitchBot potrebbe garantire l' accesso a pacchetti con accessori aggiuntivi. Come il pannello solare opzionale. In più acquistare dal sito ufficiale consente di ottenere una garanzia diretta del produttore e di beneficiare di eventuali promozioni esclusive. Per quanto riguarda la concorrenza, la SwitchBot Roller Shade si inserisce in un mercato diventato sempre più competitivo negli ultimi anni. Tra i principali concorrenti, troviamo marchi come Somfy. Il quale risulta essere molto conosciuto per i suoi sistemi di automazione delle tende e per la sua rete di distribuzione mondiale. L'azienda offre una vasta tipologia di motori per tende, persiane e tapparelle. Ma i suoi prezzi possono essere molto più alti. La RollerShade si differenzia però anche per la sua facilità di installazione. A dispetto invece di altre soluzioni che necessitano di interventi professionali. Un altro concorrente importante è IKEA, che con il suo sistema Kadrilj, propone tende motorizzate a un prezzo generalmente più basso. Ma spesso manca della stessa integrazione smart e della personalizzazione che offre SwitchBot. Esse infatti sono pensate principalmente per un pubblico che cerca soluzioni semplici e economiche. Ma non offrono le stesse opzioni di controllo tramite app o integrazione con assistenti vocali. Anche Lutron e Hunter Douglas sono marchi noti nel settore delle tende motorizzate. Ma tendono ad avere prezzi più elevati. Dunque adatti per un pubblico che cerca soluzioni premium. PRO E CONTRO Arrivati a questo punto, non ci resta che evidenziare quelli che sono gli aspetti positivi e negativi di questo dispositivo. In modo da avere le idee ancora più chiare in caso di un ipotetico acquisto. Uno dei principali vantaggi della SwitchBot Roller Shade è, come ripetuto più volte, la sua straordinaria facilità di installazione. Ciò contribuisce infatti a renderla una scelta ideale per chiunque cerchi una soluzione immediata. Senza dover richiedere l'intervento di un esperto. Un altro elemento a suo favore è rappresentato sicuramente dalla possibilità di controllare la tenda tramite app, voce e telecomando. In più la compatibilità con assistenti vocali come Alexa, Google Assistant e Siri permette di integrarla facilmente in un ambiente domestico smart. Offrendo comodità e controllo a distanza. Un altro aspetto positivo della SwitchBot è la sostenibilità. Infatti anche se il dispositivo funziona a batteria, l’azienda offre anche un pannello solare opzionale. E come se non bastasse la batteria ha una durata notevole. Non mancano però alcuni aspetti meno vantaggiosi che bisogna comunque prendere in considerazione. Sebbene l’installazione sia facile e accessibile, la SwitchBot Roller Shade non è adatta per tutti i tipi di finestre. È compatibile principalmente con tende di tipo a rullo e potrebbe non essere utilizzabile su modelli di tende più complessi. Oppure su finestre di dimensioni particolarmente grandi. In più la tenda non è progettata per supportare tessuti troppo pesanti. Il che può limitare la scelta di materiali per chi cerca soluzioni particolarmente robuste. Un altro punto che potrebbe rappresentare un limite per alcuni utenti riguarda la compatibilità. Anche se la Roller Shade si integra bene con i sistemi di automazione domestica più comuni, ci potrebbero essere delle limitazioni o difficoltà di configurazione con piattaforme meno diffuse o con impianti domestici più complessi. Ad esempio, l'integrazione con sistemi proprietari o di altri brand potrebbe non essere immediata. E per finire il prezzo, per alcune persone infatti potrebbe risultare, malgrado tutto, piuttosto alto. Ed anche il costo per un eventuale pannello solare opzionale aumenterebbe il valore complessivo del sistema. CONCLUSIONE Insomma, dopo aver esaminato ogni aspetto della SwitchBot Roller Shade possiamo affermare che si tratta senz'altro di una soluzione smart ed efficace. Perfetta per chi desidera automatizzare la gestione della luce e migliorare la privacy. Grazie alla sua tecnologia avanzata, alla lunga autonomia e all’integrazione con i principali sistemi di domotica, rappresenta un’ottima scelta per chi cerca comfort e innovazione. Dunque se si desidera un prodotto affidabile, facile da installare e capace di migliorare l’efficienza energetica della casa, questa tenda smart è la scelta giusta. Read the full article

[corelaborg]

A Comprehensive Guide to Hydrogen Sulphide Testing Methods

Hydrogen sulphide (H₂S) is a colorless gas with a distinct rotten egg smell, commonly found in industrial processes, wastewater systems, and natural gas production. Due to its toxic nature and potential to cause serious health and environmental risks, conducting a reliable Hydrogen Sulphide test is essential for safety and compliance. This guide explores various testing methods and their applications.

What is Hydrogen Sulphide?

Hydrogen sulphide is a naturally occurring gas often produced by the breakdown of organic matter in anaerobic conditions. It is highly toxic, flammable, and corrosive, making it critical to detect and monitor its presence in various environments, including:

Industrial facilities

Wastewater treatment plants

Natural gas extraction sites

Agricultural settings

Why Conduct a Hydrogen Sulphide Test?

Testing for hydrogen sulphide is vital for several reasons:

Health and Safety: Prolonged exposure to H₂S can lead to serious health problems, including respiratory issues, eye irritation, and in high concentrations, it can be fatal.

Environmental Protection: H₂S contributes to air pollution and poses risks to water systems.

Compliance: Industries must adhere to environmental and occupational safety regulations, which often require regular monitoring of H₂S levels.

Common Hydrogen Sulphide Testing Methods

Gas Detection Tubes

Gas detection tubes are one of the simplest methods for measuring hydrogen sulphide levels. They contain a chemical reagent that changes color when exposed to H₂S.

Advantages:

Portable and easy to use

Cost-effective for quick, on-site testing

Limitations:

Limited accuracy and sensitivity

Not suitable for continuous monitoring

Electronic Gas Detectors

Electronic detectors are widely used for detecting H₂S in industrial settings. These devices use sensors, such as electrochemical or infrared, to measure gas concentration.

Advantages:

High accuracy and sensitivity

Real-time monitoring

Can be integrated into safety systems

Limitations:

Higher initial cost

Requires regular calibration and maintenance

Wet Chemical Methods

These methods involve using chemical reagents to react with H₂S and quantify its concentration. Examples include the iodometric and methylene blue methods.

Advantages:

Suitable for laboratory analysis

Provides detailed results

Limitations:

Time-consuming

Requires specialized equipment and expertise

Optical Methods

Optical techniques, such as UV-Vis spectroscopy, detect H₂S by measuring the absorbance of light at specific wavelengths.

Advantages:

High precision

Can detect low concentrations

Limitations:

Expensive equipment

Requires a controlled environment

Colorimetric Test Kits

These kits use color change to indicate the presence of H₂S. They are often used for water testing.

Advantages:

Simple and user-friendly

Suitable for field applications

Limitations:

Limited accuracy

May not detect very low concentrations

Choosing the Right Method

The choice of a Hydrogen Sulphide test depends on several factors:

Application: Is the test for air, water, or soil? Different methods are better suited for specific environments.

Required Sensitivity: Determine the detection limits necessary for your application.

Cost and Resources: Consider the budget and available equipment.

Frequency of Testing: Choose a method that aligns with the need for periodic or continuous monitoring.

Best Practices for Hydrogen Sulphide Testing

Regular Calibration: Ensure testing equipment is calibrated for accurate readings.

Follow Manufacturer Guidelines: Adhere to instructions for test kits and equipment.

Use Protective Gear: H₂S is hazardous; always use appropriate safety equipment.

Engage Professionals: For complex testing needs, consult certified labs or specialists.

Conclusion

Conducting a reliable Hydrogen Sulphide test is crucial for ensuring safety, environmental protection, and regulatory compliance. By understanding the various testing methods and their applications, you can select the most suitable approach for your needs. Whether it’s a quick field test or a detailed laboratory analysis, prioritizing regular H₂S testing helps mitigate risks and promotes a safer environment.

For expert hydrogen sulphide testing services, reach out to CoreLab.org and ensure your workplace or facility remains compliant and safe.

[chenqintranslator]

Medical Translation: Chinese to English Translation of Product Manuals for Life Science Laboratory Equipment Systems

This weekend, I took on the challenge of translating a product manual for a biotech company, racking up around 3,300 words. The task revolved around transforming content from Chinese to English, focusing on the introduction of chromatography systems and various filtration products, structured as follows:

I. Company Overview

II. Team Credentials

III. Laboratory Chromatography System

1. Overview 2. Use Cases 3. Design Philosophy 4. Key Features of Each Model 5. Configuration Table, detailing model type, flow rate range, channel count, drive mode, maximum single-step volume, operational mode, flow rate precision, volume precision, chromatography type, supported solution count, batch processing capacity, operational mode, material collection, solution piping diameter, sample piping diameter, compatible chromatography column specs, working temperature and humidity range, power supply, dimensions & weight, operating pressure, UV monitor, pH monitor, conductivity monitor, temperature monitor, pressure monitor, and more.

IV. Laboratory Tangential Flow Filtration System 1. Overview 2. Key Features 3. Configuration Table, covering product number, model, equipment specs, sample mixing balance, filtration balance, main integrated pump, auxiliary pump replenishment, pressure sensors, automatic back-pressure valves, controllers, conductivity detector, pH detector, diaphragm pump peristaltic pump head, filter application suitability, treatment volume, system control mode, alarm mechanism, etc. 4. Product Benefits

V. Laboratory Microfiltration and Nanofiltration System 1. Overview 2. Configuration Table, including suitable application filters, processing volume, system control mode, alarm mechanism, gas inlet and outlet balance parameters, tank material, maximum inlet pressure, pressure sensor specs, piping interface, working temperature and humidity range, dimensions & weight, and power supply, etc.

VI. Multifunctional Laboratory Product

Pressure Detector Set, featuring an introduction, key features, and a configuration table (pressure monitoring range, readability, accuracy, pressure sensor material, connection, control mode, UV module specs, pH module specs, conductivity module specs, temperature module specs, communication interfaces, display, working temperature and humidity range, dimensions & weight, etc.)

[best-testing-lab-uae]

Key Technologies Used in Waste Water Testing Labs Across the UAE | +971 554747210

Wastewater testing is a cornerstone of environmental protection, public health, and resource management, especially in regions like the UAE, where water scarcity underscores the importance of conservation and reuse. Modern wastewater testing labs employ cutting-edge technologies to ensure accurate analysis, compliance with stringent regulations, and the sustainable management of water resources.

This blog explores the key technologies used in waste water testing lab across the UAE, highlighting their role in safeguarding water quality and promoting sustainability.

The Role of Wastewater Testing Labs in the UAE

Wastewater testing labs are vital for:

Monitoring and analyzing wastewater for contaminants.

Ensuring treated water meets regulatory and reuse standards.

Supporting industrial and municipal wastewater treatment processes.

Contributing to environmental sustainability and water recycling initiatives.

These labs rely on advanced technologies to deliver accurate and actionable insights into water quality.

Key Technologies in Wastewater Testing Labs

1. Spectroscopic Analysis

Spectroscopic techniques are widely used to identify and quantify contaminants in wastewater.

UV-Vis Spectroscopy: Measures the concentration of organic compounds by detecting light absorption.

Atomic Absorption Spectroscopy (AAS): Identifies trace metals like lead, arsenic, and mercury.

Fourier-Transform Infrared Spectroscopy (FTIR): Detects complex organic pollutants.

These methods provide precise data on water composition, enabling labs to assess pollution levels effectively.

2. Chromatography Techniques

Chromatography is essential for separating and analyzing chemical compounds in wastewater.

Gas Chromatography (GC): Detects volatile organic compounds (VOCs) and pollutants.

High-Performance Liquid Chromatography (HPLC): Analyzes non-volatile organic substances, including pesticides and pharmaceuticals.

Chromatographic analysis ensures that wastewater meets environmental discharge and reuse standards.

3. Microbial Testing

Microbial contamination is a critical concern in wastewater. Advanced testing methods include:

Polymerase Chain Reaction (PCR): Detects the DNA of harmful bacteria, viruses, and pathogens.

Colony Forming Unit (CFU) Count: Measures the concentration of microbial colonies in water.

Automated Microbial Analyzers: Provide real-time data on microbial activity.

These tools ensure the safety of treated wastewater, especially when it is reused for irrigation or industrial applications.

4. Mass Spectrometry

Mass spectrometry is a powerful tool for detecting trace contaminants in wastewater.

Inductively Coupled Plasma Mass Spectrometry (ICP-MS): Identifies heavy metals and other inorganic pollutants.

Liquid Chromatography-Mass Spectrometry (LC-MS): Analyzes pharmaceutical residues and emerging contaminants.

This technology offers unparalleled sensitivity, making it indispensable for regulatory compliance and environmental monitoring.

5. Real-Time Monitoring with IoT Sensors

The Internet of Things (IoT) is revolutionizing wastewater management by enabling continuous, real-time monitoring of water quality.

Smart Sensors: Measure parameters like pH, temperature, dissolved oxygen, and turbidity.

Data Analytics Platforms: Aggregate and analyze sensor data to identify trends and anomalies.

Remote Monitoring Systems: Allow labs to oversee multiple treatment facilities simultaneously.

IoT-driven solutions enhance efficiency and reduce the need for manual sampling.

6. Advanced Imaging and Microscopy

Visualizing contaminants provides valuable insights into wastewater composition.

Scanning Electron Microscopy (SEM): Examines the morphology of particulates in water.

Confocal Laser Scanning Microscopy: Analyzes biofilms and microbial communities.

Imaging technologies are particularly useful for understanding the biological and physical processes in wastewater treatment.

7. Automated Sampling Systems

Automated samplers streamline the collection of wastewater samples, ensuring consistency and accuracy.

Composite Samplers: Gather samples over a set period for a comprehensive analysis.

Discrete Samplers: Collect specific samples at designated times or locations.

These systems reduce human error and improve the reliability of testing results.

8. Artificial Intelligence and Machine Learning

AI and machine learning are increasingly being integrated into wastewater testing.

Predictive Analytics: Forecast contamination events based on historical data.

Anomaly Detection: Identifies irregularities in water quality data.

Automation of Data Interpretation: Speeds up the analysis process and reduces human error.

These technologies enhance the efficiency and accuracy of wastewater testing operations.

9. Electrochemical Analysis

Electrochemical techniques are cost-effective and highly sensitive for detecting pollutants.

Potentiometry: Measures ion concentrations to determine pH and alkalinity.

Conductometry: Analyzes the electrical conductivity of water to assess salinity.

Voltammetry: Identifies heavy metals and organic pollutants.

Electrochemical sensors are often portable, enabling on-site testing.

10. Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) Testing

BOD and COD tests are standard methods for evaluating organic pollution in wastewater.

BOD Testing: Measures the oxygen consumed by microorganisms in water over a specific period.

COD Testing: Quantifies the total amount of oxygen required to oxidize pollutants.

These tests provide a clear picture of the organic load in wastewater, guiding treatment processes.

Challenges Addressed by Advanced Technologies

Modern wastewater testing technologies help overcome common challenges such as:

Detecting Emerging Contaminants: Pharmaceuticals, microplastics, and endocrine disruptors.

Ensuring Regulatory Compliance: Meeting UAE federal and emirate-specific environmental standards.

Supporting Water Reuse Initiatives: Providing safe, high-quality treated water for non-potable applications.

By leveraging advanced tools, wastewater testing labs enhance their capability to address these critical issues.

Impact of Key Technologies on UAE Sustainability Goals

The UAE’s Vision 2030 and sustainability strategies emphasize water conservation and resource efficiency. Technologies in wastewater testing labs directly support these objectives by:

Reducing water pollution and protecting ecosystems.

Promoting wastewater reuse in agriculture and industry.

Minimizing the environmental footprint of water treatment processes.

These efforts contribute to the UAE’s leadership in global sustainability initiatives.

Case Studies: Technology in Action

1. Al Ain’s Municipal Wastewater Treatment Plant

By integrating IoT sensors and real-time monitoring, the facility has improved its treatment efficiency and reduced operational costs.

2. Dubai Municipality’s Water Reuse Program

Advanced spectroscopic and chromatographic techniques ensure the safety of recycled water used for landscaping and irrigation.

Future Trends in Wastewater Testing

Looking ahead, the industry is poised to adopt:

Nano-sensors: For ultra-sensitive contaminant detection.

Blockchain Technology: To ensure transparency and traceability in water quality data.

Green Testing Practices: Minimizing the environmental impact of lab operations.

These advancements will further strengthen the role of wastewater testing labs in the UAE.

Conclusion

Key technologies used in wastewater testing labs across the UAE are driving innovation in water quality analysis, resource management, and environmental protection. From advanced spectroscopy and chromatography to AI-driven analytics and IoT monitoring, these tools ensure the safety and sustainability of treated water.

As the UAE continues its journey toward a greener future, wastewater testing labs will remain at the forefront, leveraging cutting-edge technologies to meet the nation’s environmental goals and support its water conservation efforts.

[lifeclaveseo]

Autoclave UV/Vis light source preheating chamber technology Humidity regulation with capacitive humidity sensor and vapor humidification Inner chamber made of stainless steel Intuitive touchscreen controller with time-segment and real-time.

 UV Chambers manufacture in Delhi 

Find the available some color of UV chamber.

UV Chamber Grey

UV Chamber Blue

UV Chamber Orange

UV Chambers Black

UV Chambers Brown .

[headshotphotographernearme]

What's in a Wedding Photographers Camera Bag

I was shooting an 'out of territory' wedding a week ago (to me that is a wedding in excess of 20 miles from my home), went to get my camera pack and nearly had a hernia. It weighs so much that it helped me to remember being back in the Military with your life on your back. What's more, that is exactly what my camera pack is - all I require to shoot a wedding, or picture or simply individuals when I am away. A versatile studio in truth prepared for each projection.

You should ensure that your own wedding headshot photographer near me has the equipment needed with them, or in the vehicle, to adapt for any shot you may need!

Common Wedding Photographer's Unit (Standard Client)

Group EOS 5D Imprint II with 24-70mm L f2.8 (with UV channel)

Group EOS 5D Imprint II with 70-200mm L f2.8 IS (with UV channel)

Two Group 580EXII speedlights, with Stofen diffusers and mounts

Two extra 5D Imprint II batteries

Four arrangements of battery-powered batteries for the speedlights

One lot of graduated channels for those (less and less utilized) imaginative moments

4 enormous waterproof plastic see however sacks - just on the off chance that it downpours

Gary Fong light circle appended to the outside of the sack

Strobies streak diffuser for a situation appended to the outside of the sack

Manfrotto monopod tied to the outside of the pack

One little sack containing 'hair scrunch' with shimmering pieces and champagne plug for adding to the ring shots. (Makes them somewhat all the more intriguing!)

Manuals for both camera and blaze units - well you never know!

Leatherman instrument for a situation on the shoulder lash

A few climbing karabiners on the pack - come in convenient when you have to tie down stuff to tables/seats

One blower

Two cleaning fabrics

Container of cleaning liquid

3 sensor swabs

100Gb of memory cards

320Gb outside HD

100-business cards

25 advertising handouts (for those guerrilla showcasing moments!)

5 x 1Gb USB memory sticks

2 x 5Gb DVD-RW

DVD marker pen

Hello Vis vest

Move of gaffer tape outwardly

Lightweight mount lashed to outside of the sack

Manfrotto stand and joystick ball head outwardly of the sack

Little vanity case - I generally convey hairspray, hair holds, brush, brush and so on It is a lot simpler to ensure the lady looks amazing before the photo is taken than in Photoshop subsequently.

PC Case - Sounds clear yet it bodes well to back up the photos as and when I can during the day. I likewise convey a compact 320Gb Hard Drive giving me three arrangements of the wedding photos. Set 1 is on the memory cards. Set 2 is on the convenient HD and set 3 is on the PC. Obviously every one of the three are typically in better place with the memory cards kept in my pockets the entire day. I likewise utilize the PC to flaunt a determination of rapidly altered photos to the glad couple and their visitors.

Information Projector - on the off chance that there is space at the setting, at that point this is an extraordinary apparatus. Associated with the PC I can flaunt the wedding photos, for the most part during the night, to visitors promotion evening visitors.

It might appear to be a great deal however as an expert it bodes well to guarantee you have all the unit you will require instead of saying "Sorry - I need xxxx for that shot and it is in the studio."

Check with your wedding photographer what they will bring so no shots are missed!

Wedding Photography Bundles in South Ridges and the UK. Mid week photography bundles from £399 with Wedding Photography and Collection bundles beginning at £800.

Andrew has been taking photos for a long time and shooting weddings and taking wedding photos for nearly 15 years.

He is a favored provider to the Cwrt Bleddyn in Usk so in the event that you are contemplating getting hitched there he can offer you some extraordinary cash sparing arrangements.

[malumsmermaid]

Attachments (CH)

A/N: So, been watching a lot of Ghost Adventures, wanted to do something with ghost hunting, and uh, so this happened out of it. It’s in the same universe as Toxic Valentine because that world is already started so uh yeah. Anyway it’s a fun one and I have an idea I’m gonna explain more at the end.

Word Count: 5,336

Warnings: language? not really much else tbh

Description: Demon!Calum x Ghost Hunter

Calum settled into his large leather sofa with a sigh, kicking his feet up onto the coffee table. He flipped on his tv, snapping his fingers, smiling as his now open beer landed on the coaster next to his foot as the refrigerator door slammed shut. He scrolled through the guide, settling on a rerun of Cutthroat Kitchen.

He had finished off this month’s list of people who owed debts to the king and other higher ranking demons, the final four all ending up at the same coffeeshop, sitting at the counter waiting for their coffee, each looking tired and hunted. When Calum got their attention, his brown eyes shifting to pure black, they all followed him quietly. When they appeared at the office, they each had their coffee order in hand, Calum figuring he’d give them a slight reward for not making him chase them down. Allowing them to at least have something to fiddle with while they had to stand in the check-in line.

He gave them a quick warning about what would happen if they chose to try and sneak out, thanked them for the long weekend he was about to begin, and then turned to walk to the elevators, his whole day now clear, so he had time to take the long ride back up to the surface, slipping his phone out of his pocket to make plans.

For tonight though, his only plans involved his couch and some tv. He was halfway through his beer and Simon was just about to announce who was not going to be in the final round when Ashton appeared on the couch next to him. Both demons sat quietly for a moment, Calum waiting until the show cut to break to ask, “We got a case?”

Neither demon were typically delivery boys, at least not anymore, but things were quiet at the moment and they hadn’t risen as far as they had in the past couple centuries by slacking off. Ashton shook his head in response, fingers running through his tousled red hair before he spoke. “I need you to cover for me. I’m supposed to check in on one of the portals tonight, but-“ He paused and Calum raised his eyebrows slightly, looking at the fidgeting demon next to him. “It’s just, it’s one year since Angel and I started officially seeing each other and I wanted to do something for them.”

Calum smiled, letting out a soft chuckle, joking, “Neither of you are human, time doesn’t really matter.” Ashton’s hazel eyes widened at his response, flicking upwards as if to remind him of why the anniversary was important, and Calum hummed. “Yeah, I get it, don’t worry, but you owe me two cases of beer, alright?”

“There’s a ghost hunting team there tonight.”

Calum laughed quietly, shaking his head, “Ok, one case of beer, just because I like to fuck with the ghost hunters. But you’re up to three if they bring a spirit box, those things are fucking annoying.”

Ashton grinned, clapping his friend on the shoulder in gratitude before turning into shadow, leaving Calum to his show.

*******

Rose smiled into Matt’s camera as they did a final check on their gear, making sure that, at least for the moment, the batteries were all charged up and everything was functioning. A few strange things had already happened while they were shooting their interviews and going over the history of the location, so she hoped that now, as the full moon was shining down in all her glory, the activity would be on the rise. She pocketed her ovilus as Violet walked up, holding the thermal cam and spirit box. Once Erin and Sid walked back into their command center and confirmed that everything was rolling and ready to go, they made plans, initially splitting up into three different areas of the building to do solo investigations while Erin and Sid watched the live feed of the X cams they’d already set up, to be where the other three couldn’t. They’d regroup at the command center and go over they’d experienced so far in three hours, then Matt, Vi, and Rose would all go into the room where the alleged portal was located.

The ghost hunters were so focused on checking everything that they didn’t notice the temperature sensor on the other side of the room go off as Calum appeared in their base camp, keeping himself invisible to the humans in the room for the moment. The demon rested his hand on the back of one of the office chairs in front of the monitors, scoping out which rooms they had cameras in. One corner of his mouth pulled up when he noticed that one of the stationary cameras was unsurprisingly pointed at the portal he was supposed to be checking on. He shook his head before looking up in surprise at the sound of a camera shutter. He looked towards the group, noticing that one of the women was holding a full spectrum camera and doing a few test snaps around the room. The camera went off again while Calum was frozen, this time pointed straight at him. Fortunately, they didn’t seem to be checking the photos in that moment, maybe not expecting anything to be in the control room with them, though Calum was aware of two weak spirits, cowering in the corner, trying to not be noticed by the demon in the room. He straightened his suit and gave a quick salute to the two ghosts and disappeared, having decided to go wait in one of the rooms for the team to get started.

He didn’t have to wait long, watching as Matt slowly made his way into the dark room, switching off his flashlight so that the night vision camera in his hand could actually do its job. Calum hummed, listening to Matt drone on about using his energy to appear and that he wasn’t there to hurt the spirits and whatever else he had to say to what he believed to be in the room with him. Calum rolled his eyes, lobbing a small stick towards the stationary cam in front of him, nodding at the ghosts whose forms were growing stronger as Matt spoke to the room, and disappeared, letting out a bored sigh into the digital recorder as he did so.

He appeared with the next person, trying to decide what he should do when the purple UV lights of the full spectrum and the static screech of the spirit box covered him. “Ok, guys, there’s a shadow in the room with me now, I’m seeing it on the full spectrum. I’m going to attempt communication with this entity. Hello, if you are the shadow in the room, can you tell me your name? Do you mean any of us harm?”

Calum’s hands went to shield his ears as he said, “ow, shit.” The words made their way out of the spirit box and he took the young woman’s freak out over his communication to vanish, this time just running out into the hallway to get away.

He decided to take a quick stop in on the portal to do his actual job before continuing to mess with the hunters. He refreshed the incantations that kept it under their control and fixed up a few other issues he noticed as he took in the portal, humming quietly as he did so.

Once he finished everything he needed with the portal he strolled over to where the team’s equipment reading this room was. He looked at the main camera, another full spectrum lighting the room purple. It made sense that there would be one of those in the most active room in the building. He turned his attention to the other piece of equipment, looking at the large screen. He let out a chuckle, shaking his head as he noticed that in addition to mapping the room, it was reading the atmospheric conditions. “Definitely set some of that stuff off.” he murmured, glancing at the temperature and humidity readings which were slowly moving back to where they had originally been now that he had finished his work on the portal.

He knew things wouldn’t fully stabilize until he left the room, his thoughts going to the bright red haired woman he had yet to see. She had clearly been the leader of the investigation, which would make her the most fun for Calum to fuck with. His mind flicked back to a tale from a ghost at a hotel Calum had visited once, telling him how he had once thrown a large man with spiked black hair down the hall and sent him crying for the rest of his team, shaken up from their meeting.

He was about to go to the other room with a stationary cam that he hadn’t visited yet when he heard a woman from the doorway, speaking into her walkie talkie, “Yeah, I’m heading into the portal room to check out what you guys have been seeing, I’ll be in touch if anything gets crazy and I need backup.”

She panned the room with her infrared camera, calling out, “Hello? Is anyone in here? My friends are using this piece of equipment we set up earlier tonight and they saw the conditions in this room going crazy. Did you want our attention? Do you want me in here?”

“Not really,” Calum stated, not caring whether his voice was captured only on the audio for later or if the red haired woman he’d just been thinking about heard him herself. “Was just trying to do what my buddy sent me here to do.”

He paused, standing behind the two different cameras, listening to the silence that had taken over. Clearly she had yet to hear him. He glanced to his right at the screen and saw a little stick person appear, labeled “anomaly detected.” Shit. He’d possibly been seen doing his work as well. He glanced over his shoulder to see a new ghost, an old woman, smiling at him, as if she were enjoying the show that he was now involved in. He sighed, throwing his arm out away from his body, dispelling the spirit temporarily. He could hear voices coming over the radio the girl had on her hip, but she seemed to be paying more attention to the room itself than her friends’ updates on the stick figure.

“I have a device in my hand, it’s an Ovilus III. You can scroll through it to find the words you want to use to answer my questions, do you understand?”

Calum grinned, he much preferred this sort of device. He floated over, trying to keep from crunching the scattered bits of rock and broken glass that covered the floor by hovering above it. However, as he landed behind her he landed on a large piece of glass, making a loud crunch as it was caught between the bottoms of his Docs and the floor. He let out a breath, leaning over her to put his hand on the device.

“I’m feeling a heavy presence around me.” Rose said into her camera, turned toward her face as she skimmed the room.

Calum just smiled, finding two words he wanted to say.

“You’re cute,” the ovilus slowly spat out in its robotic voice.

She gasped, camera pointed at the display screen now, showing only the world ‘cute.’ She closed her eyes for a moment, licking her lips before asking, “Are you the presence I feel around me?”

“Yes,” both Calum and the ovilus said.

“Can you tell me what you are?”

“Don’t wanna scare you yet.” Calum smiled, smirk falling when the ovilus only managed ‘don’t…scare.’

“Is something scaring you, or do you not want to scare me?” Rose asked after a moment, trying to make sense of Calum’s message.”

‘Second.’ he willed the ovilus to respond, staring at the dark black line under the word. His focus on finding the right word seemed to have used a lot of power, if what he understood about the device was correct.

“Okay,” the ghost hunter said shakily, “I understand. Thank you.” An alarm went off and Rose glanced down at her watch. She chewed her lip before asking, “I have to go meet with the rest of my team now. We’re going to come right back into this room after we change batteries and talk for a little while. Can you stick around and talk to all of us when we come back?”

“Course doll.” Calum said, satisfied that the device actually caught both words this time and not just the affirmation or the term of endearment.

“Th-thank you,” she said and Calum pulled back off of her, allowing her to leave the room without running through him.

Calum hummed, watching her until she turned a corner. He smiled to himself, floating upwards and just resting on one of the rafters. He leaned his head back against the wooden beam. He knew he’d made a lot of noise tonight and perhaps should’ve waited a little longer to start his work, but he did halfway just want to go curl back up on his sofa with his hell hound, seeing what other torturous things Alton Brown could come up with for those who dared to brave his kitchen.

He considered for a moment summoning Duke here, but the dog was about as old as Calum was, which was pretty damn old for a hell hound. If Calum hadn’t taken Duke in he probably would’ve been dispelled as he started to slow down, not able to shadow travel as well anymore. Calum’s heart was still a little soft, so he’d allowed the dog to live out the rest of his days in comfort, disguised as a small fluffy dog so that his human neighbors wouldn’t freak out over the shadowy dog romping through his yard.

So he decided against summoning the dog here, even if he could technically carry Duke through the portal to go home, choosing to just let the dog sleep. It was the middle of the night anyway. He wondered if he’d rather they use the spirit box when they came back in. As much as it hurt his ears, at least he could completely communicate his thoughts to his company.

“How long are they going to sit around and talk about things?” he groaned, glancing to the open door.

He was a demon, he didn’t have to keep the promise he’d made to the girl, but then again, he felt compelled to keep his word. He decided instead to focus on the other presences in the room. Several were just impressions, stuck forever in a time loop, repeating a few moments in their life over and over until the end of time. The other three were intelligent, two of them drawn by the energy and power radiating from Calum. The third was the old woman, returned from wherever in the building Calum had sent her earlier. He hummed, eyebrows furrowing as he focused in on her.

He hopped down from his rafter, gracefully landing in front of her. “Pardon me ma’am, but there’s something familiar about you. Did you create the portal?”

The old woman nodded, shifting her silver braids over her shoulder. “Thank you for maintaining it. I prefer you to the others who have come in years past.”

Calum smiled at her, “You got lucky tonight. My friend was supposed to come tonight, but he got me to cover for him.”

She hummed, grasping Calum’s wrist. He jumped in shock, she was probably just as powerful, if not more powerful, in death as she was in life. Very few ghosts were able to touch him at all, and her grip was firm. Her eyes were closed and she nodded slowly, “I like him too. He’s nice to talk to. You both have potential to be good, to ascend from your current state.”

Calum laughed, “Luke and Michael say the same thing.” He smiled as he looked up at the ceiling, shaking his head as he went on, “Don’t think their boss would see things the same though.”

The woman shrugged again, “never know if you don’t try.”

He hummed, nodding quietly before continuing to talk with the old woman. Soon enough they both heard footsteps coming towards them down the corridor. She smiled up at Calum, “You’ve kept your promise to the ghost hunter. We’ll talk again next time.”

Calum just stared as she faded from the room, taking the other spirits with her. He sighed, quietly settling into the old rickety chair as he listened to spirit box girl talk to the camera, giving a recap of the room’s importance and what the other girl had experienced earlier in the night.

“Is the entity I was speaking to earlier still here? I didn’t introduce myself earlier, I’m Rose, I brought my friends Matt and Violet with me. I have the same device we were using when we spoke earlier. Can you tell me your name?”

Calum smiled, walking over slowly.

“Rose, there’s some black mist showing up on my camera! It’s coming toward us.” Matt called.

Calum stopped a few feet from Rose, humming quietly as he put a finger to the ovilus, pulling up his name.

“Calum.” The ovilus droned and Rose grinned.

“Are you the spirit I was talking to earlier, Calum?”

“Yes.”

“Are you the mist my friend is seeing on his camera?”

Another “yes.”

“Is it ok if we use a different device to communicate with you? It may allow you to answer our questions more completely.”

Calum shook his head, he’d had a feeling this was coming, and he was debating how many beers Ashton may owe him over this. “If…Must,” the ovilus rattled out and Calum sighed.

“Okay then…” Rose said, glancing at her other friends, who were staring at her in shock. Even having seen the footage from earlier they still couldn’t believe what was happening.

Violet stepped forward in a daze, switching on the spirit box before looking over at Rose. She just nodded at her friend and continued on, “Ok Calum, use our energy and the energy being put out by this new device to continue communicating with us. It’s ok if you need a second to shift your focus.”

Calum just laughed, they really had no idea what they were dealing with. “Sounds dangerous, sweetheart.” he stated, smiling at the echo of his voice through the speaker of the box.

Rose took a deep breath, eyes glued to the spirit box. “Earlier you said you didn’t want to scare me by telling me who or what you are, I have my friends here now, so I might be less scared. Can you tell me now?”

“Darkness.” Calum replied simply with a shrug.

“We got that from the mist I’m seeing, Calum. Can you give us any other sort of sign as to what you are?” Matt asked, calling across the room while he kept his camera trained on the two women.

Calum took a moment to think about his next move. He tried to pull his focus from the screeching of the spirit box, to bring his attention to anything other than the white noise filling the cavernous room. “God, I know that thing makes it easier for ghosts to talk, but…”

He paused mid sentence, draining the battery of the spirit box before appearing before them in his human form, also killing Matt’s camera just for the hell of it, “It hurts my fucking ears.”

The trio stared at him in shock, completely frozen as they took him in. He grinned at them, gently taking Rose’s hand and pressing it to her lips. “Was nice to meet you Rose. I was just s’posed to check on our portal and head out, but it’s been nice helping the ghosts show you three a good time.” Rose found her voice again, “What are you? You keep avoiding it. You killed our spirit box to appear, and you said ghosts, like you aren’t one.”

Calum just laughed, his brown irises glowing orange, so that the humans could actually see the change in his eyes. “Do you really wanna know, doll? Probably could’ve appeared without killing the spirit box, but like I said, it’s annoying and it hurts my ears. Also killed your buddy’s camera for fun. Left everything else alone.”

Violet stared at his glowing eyes, letting out a little whimper of “demon.”

Calum just nodded at her in response, giving her an encouraging smile.

“Do-do you plan on attaching to any of us?” Matt gulped out.

Calum smiled, shaking his head, “No, this is just more fun than sitting on my couch watching Food Network reruns. May run into you guys sometime later though, just for fun. I’ll let you know if I’m there. ‘Specially you, cutie.”

Rose blushed at the attention of the demon and he smiled, gently fixing a stray strand of her hair before waving goodbye, disappearing into the shadows once more.

~~~~~~~~

A few weeks later, Calum was hanging around in some small town in the bible belt, chasing down the kid of one of his bosses who had been skipping out on school. She seemed to be choosing to hide in a place where her mom couldn’t follow, but she didn’t seem to realize that that didn’t mean that Calum couldn’t. He hadn’t seen the kid yet, so he was just sitting on a brick wall that allowed one of the little flower gardens to stay level with the patio it was based off of while the sidewalk sloped downward. He kicked his legs back and forth, letting his chucks bounce off the wall as he stared at the clouds rolling by.

His attention was brought back to earth suddenly. He hummed, scanning around when his eyes landed on a familiar person. He smiled as he watched her. Her bright red hair had faded, dark roots showing through. He frowned a little when he noticed that her energy was much different from last he saw her. He didn’t sense anything attached to her though, so he knew it wasn’t from her job. So the next thing he did was the most logical, hopped off the wall and called to her.

Rose jumped, eyes narrowing when she noticed Calum. He frowned at her reaction but continued walking towards her. “Kept my promise, I swear, I’m here on business. Just wanted to say hi, you seem off.” Calum said, holding his hands up as he smiled at her.

“So you don’t have a buddy here keeping tabs on me?” Rose asked. She sounded genuinely curious and it threw Calum off.

“No, is someone following you? You don’t have any attachments. First thing I checked when I saw you and noticed your different energy.”

She scoffed, shaking her head before humming. “No, just being home sweet home can do that to me.”

Calum nodded, eyes now scanning the area for anyone who seemed to be paying them any attention. However it was midmorning in a small town, not too many people had come into town yet. “I’ll get you a coffee and you can talk to me about this guy who’s been following you. Maybe he’s just a human I can scare off.”

Rose was reluctant but nodded, following him into the coffeeshop he’d been sitting outside of. Once they’d ordered and received their breakfast they stepped outside to sit on the patio to eat. They were both quiet for a few minutes, before Calum spoke up. “So being here, brings up some ghosts for you, huh? And even though the kind you’re looking for are present, you’re more worried about the ones from your past?”

Rose swallowed down the lump in her throat that had nothing to do with her breakfast sandwich before nodding. “Yeah, curse of a one stoplight town, huh?” she tried to joke and Calum gave her a sympathetic chuckle, smiling over his coffee cup.

He reached over the table, stilling her fidgeting hand and hummed, concentrating on her energy. “Complicated relationship with mom, and with religion, makes sense, growing up in a town where everyone’s at the same church and they’ve known you since they were changing your diapers. But that’s not all of why your mom and you are having issues…she doesn’t like the ghost hunting does she?”

Rose was just staring at him before she whispered, “Or my hair, or piercings…just everything I’ve done since I turned eighteen in general, why I don’t come back here much.”

He nodded slowly, pulling his hand back, he wasn’t trying to pry. He instead took a long gulp of his coffee. Rose sighed, putting her own coffee down for a moment, “Just…only reason I’m back here is my grandma’s sick, like real sick, so, y’know, in case.” Calum just nodded, squeezing her hand quickly since she’d offered it. Rose sighed as his fingers trailed away, actually meeting Calum’s eyes. “Have a couple months off before we shoot for our next location, though I do have to go back to LA next week, editors noticed that uh, after our encounter with you, all we have on the stationary cam after you drained Matt’s camera battery is a shadowy figure and then snow. So we’ve gotta just do a little explanation of what happened after that, would love to figure out what exactly to say about that if you get the chance.”

Calum sighed, “I didn’t intentionally do that. But when I’m not working, say tomorrow, or something, we can chat about it? I’ll let you know somehow.”

Rose smiled in response and Calum could practically feel her mood lifting throughout their chat. “So, important question,” she started and Calum nodded, having a feeling where she was going, “if you’re a demon, that means that angels are real too.”

Calum smiled and said, “Yeah, some of ‘em are righteous assholes too.” He laughed as he shook his head. “Did get stuck with two for a month quite a few years back and we’ve been friends ever since. Then my best friend has to go and start dating a different one and they’re not too bad either. Do have plans with my buddy Michael this weekend, thanks for reminding me to think about him.”

Rose nodded, humming as she looked around the square, searching for another topic when her eyes landed on someone staring at them. “Don’t be too obvious, but the guy who’s been following me is here.”

Calum just simply grabbed her hand again, closing his eyes and focusing on seeing who she saw. He got an image of a tall man with bleached blonde hair, swept to the side and hidden under a baseball cap, comfy looking white shirt and black pants and he just laughed. “Speak of the angel…” he muttered, turning around in his chair to smile at the figure who he was expecting to still be across the street.

“Fuckin hell man.” Calum said when he practically knocked into his friend as he spun in his chair.

“Kid you’re after saw me and took off down Fifth.” Michael said simply and Calum rolled his eyes.

“Right back then. Don’t talk about anything too important without me.” He winked at Rose and disappeared and Michael took his seat.

Michael looked over awkwardly at Rose, the woman he’d been watching for the past month, on shifts with Luke. “So, see you’ve met my friend.” he started, fidgeting with the sleeves of his shirt.

“And you’re not someone he sent to keep an eye on me, nor are you just some creepy human guy following me around.” Rose stated evenly, looking at the blonde.

Michael nodded, “Yeah, Calums not a demon who’s big on attaching to anyone. Your mom was worried about you a month ago and asked for someone to keep an eye on you, and uh, Luke and I got assigned to that…surprisingly Luke is better at being covert than I am.”

Rose hummed, “Guess she was right to be worried. Month ago was my first encounter with our mutual big bad demon.”

Michael bit his lip, nodding slightly. “Look, I love Calum, known him for like maybe fifty years now, he’s got potential to be redeemed if he works towards it, but he’s still a demon, and a powerful one at that. Just…be careful.”

Rose nodded slowly, “I know what I’m dealing with. Think we just happened to run into each other. If it happens again…maybe it’s the universe attaching us, maybe it’s trying to give him that chance you want him to have.” She sighed, shaking her head and grabbing her coffee, “I should probably get going anyway, check on grandma. Nice knowing you’re not a creepy stalker. See you around sometime, yeah?”

Michael laughed softly, nodding before standing and wrapping Rose in a hug. “Stay safe, alright? Think about what I said about Calum.”

Rose thought she could stay in his arms forever, Michael definitely felt safe and she just nodded against his warm chest. “Yeah, I’ll think about it.”

He smiled and gently ran a hand through her faded hair, giving it back some of its life and color. He released the embrace and watched as she walked off, noticing Luke flying along after her and he hummed, letting the sunbeams fall on his skin while he waited for Calum to come back, mulling over Rose’s statement before she decided to leave.

~~~~~~~~

Calum had had his own talk with Michael after he returned from delivering the young girl back to her mother, disappearing as soon as she dismissed him to go back to the coffeeshop. By that time it was noon and Rose had been long gone, but Michael stayed to give him the whole “you’re great and I love you, but back off this girl” spiel.

There was just something about her though, so Calum left a note in Rose’s mom’s old, single story farmhouse, in the room, Rose grew up in, asking Rose to meet him in the woods that night. If she wanted to, of course. So now he was just sitting on a low tree branch, hanging over the water, hoping she’d show.

Sure enough, there came some soft footfalls in the pine needles behind him and he turned, smiling at Rose. “Dyed your hair again.” he noted and she smiled, shaking her head no.

“Think Michael touched it up, I didn’t do anything.”

He nodded and patted the spot next to him, which she easily took. “So about that new interview. Uh, guess since I didn’t actually show up fully…just kind of say you had made contact with some sort of dark spirit from the portal, it screwed with the equipment, and you three went home and got a cleansing to get rid of it.”

Rose sighed, “But I don’t want to lie about you.”

“Not a whole lie, just the part about the cleansing, right? I promised to leave you guys alone, did that, nothing from there went home with you. Besides, it’s probably better for everyone not to know everything that happened.”

Rose sighed, she knew what Calum had to say was true. “So, other thing, are we going to listen to Michael?”

Calum laughed, feeling the branch shake beneath him as the sound tore through him. “When he talked to me, saying to stay away, he was looking around like ‘just so you can say I did my job.’ But there’s something about you that I don’t think I want to stay away from. Something bigger than you, me, and Michael. Don’t care what happens if you don’t.”

“I’m fine with that.” Rose responded with a smile, leaning closer to Calum and connecting their lips in the gentlest kiss that would be shared by the two that night.

Tags: @irwinkitten @calpops @dammitbands @empathycth @gorgeouslygrace

Ok, so what I’m thinking is doing one more part to this world that was originally just “let’s fuck with Laura” for toxic valentine and having a redemption for our demon boys with the help of Mikey, Luke, Rose, and Angel. Just all the important beings in Calum and Ashton’s lives.  That idea hit from my ghost friend and so...we’ll see what happens with that. Anyway, hope you enjoyed! Idk, haven’t done author’s notes on shit since high school wattpad days lol. Bye.

[materialscience-crimson]

Is the Brus Equation Correct?

Short Communication

Metal oxides were widely used in the domains of materials, physics, and chemistry and have been extensively used in catalysts, fuel cells, piezoelectric materials, sensor materials, and optical components. Among various metal oxides, CeO2 is one of the extensively applied and discussed. It has a face-centered cubic structure with a high melting point (2400-2700 ℃) and possesses remarkable properties such as the number of effective redox Ce3+/Ce4+ sites and their ability to exchange oxygen [1]. Therefore, it has good optical properties, thermal stability and electrical conductivity, and oxygen storage function [2,3]. For instance, the optical property of UV-vis spectroscopy for the CeO2 nanoparticles exhibits a blue shift with respect to the bulk material due to quantum confinement, which have two limiting case, depending on the ratio of the crystallite radius to the effective Bohr radius of the electron-hole pair [4].

Therefore, the crystal size and energy gap measurements were significant in applications. Thus, a discussion of crystal size with energy gap was required. The relationship between crystal size and energy gap can be described by the Brus Equation [5]. In addition, a modified Brus equation was proposed by Ferreira et al. [4], where the modified values were smaller than that obtained from the Brus equation. In order to conduct comparisons between the Brus equation, several reported data in the literature were collected.

Read More About This Article:  https://crimsonpublishers.com/rdms/fulltext/RDMS.000902.php

Read More Crimson Publishers google Scholar Articles: https://scholar.google.com/citations?view_op=view_citation&hl=en&user=HyV_IokAAAAJ&citation_for_view=HyV_IokAAAAJ:OU6Ihb5iCvQC

[electrica-conexion]

Puede crear la ilusión de espacio y carácter adicionales en una habitación con techos bajos, o grandeza y gracia a una con techos más altos con esta lámpara Bucaramanga VI, modelo 6YDLED430MV65B, de la marca #Tecnolite. Esta lámpara para interior es de acento, para empotrar en techo; cuenta con LED integrado de 6 watts de potencia, iluminación a 6500 Kelvin o luz de día que brindará a tus espacios una sensación fresca, amplia, dinámica e ideal para trabajar. Fabricada en aluminio con terminado en blanco; cuenta con tiempo de vida de 15000 horas, 5 años de garantía, flujo luminoso de 320 lúmenes, ángulo de dispersión de 120°. No genera calor, no emite rayos UV, no es dimerizable/atenuable, no es compatible con sensores de movimiento infrarojo. Incluye accesorios de conexión y montaje Este producto lo encuentras en #EléctricaConexión 🔌 tu tienda 🏠 de #MaterialesEléctricos ⚡️💡

¡Pásale la lista al especialista! ✍️ ✅ 👷 🏠 Sierra de Zempoaltépetl 310, Sector I, Santa Cruz #Huatulco, #Oaxaca 📞 958 583 4907 🌐 econexion.cnx.mx

[novusfire07]

Flame detector Tester Lamp - Novus UAE Dubai

https://www.novus.ae/flame-detector-testers/

The Novus Flame detector Tester is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The Flame Detector exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR Detectors and Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions.

For More Details:

Address:304, SUNSHINE BUILDING ABOVE EMIRATE ISLAMIC BANK, SHEIK RASHID ROAD, AL GARHOUD – DUBAI – UAE Email: novusuae@eim.ae Call:7142504343 Website:https://www.novus.ae/ Facebook:https://www.facebook.com/Novus-Fire-and-Security-103813075333113/?ref=pages_you_manage