#anthro doll

[otterloreart]

It's The Video. You know, the one I worked on for six months.

Where I show the making of this

and also

this

[obscuredollz]

🐾 Catwalk Kitties 🐾

[xiannavacaloura]

[dollsahoy]

This is Shep! Shep is a Barbie Extra #2 pet head on a My Scene guy body that was spray painted white to match.

The biggest challenge was getting this head--which only has a big squared-off cavity inside where it was attached without rotation to the original small dog body--attached to the old-style "the head has a flanged knob that goes into the otherwise flat neck" Ken body. I'm sure I could have rigged up something that would allow for tilt, but, since the body was being painted, a rotation-only cut joint was fine (there's less chance for paint rub with that kind of joint.)

Not too long ago, I realized that twisty lip balm tubes could be scavenged to make a cut joint, and this is the first project where I tried that out. I trimmed the tube down close to the base and puttied it into the body neck opening with the cut part down, making sure the end could still rotate freely. I put a small screw into the center of the end, to provide more for the putty to grip; I also put the lip balm cap into the head, open-end-up, to fill some of the space inside. (I'll mention here that I also Dremeled the head opening to be larger and rounder so it would fit without conflict where I wanted it.) Then I put more epoxy putty around the screw and smooshed the head onto it so it was low enough to hide the putty holding the lip balm end in place, then let it cure. The connection is solid and the head rotates freely, but with enough friction to hold a pose. I'm happy it worked!

[ooklet]

another weird little hybrid. an aphmau clip on cat head plush + a boxy girls rainbows goldie body. i hate blind box "surprise" toys but i figured you can't go wrong with a $5 cat head. the yellow one that we got happened to be a perfect match for goldie. i removed the tag and clip and restuffed her head more firmly, then cobbled together a neck peg for her out of quilting cotton, felt, a knitting stitch marker and a ton of glue (she can't tilt up and down but can look side to side). wife sewed her head back up around the janky peg and is gonna make her a bespoke outfit as well!

i'm not usually big on anthro dolls but she's so goofy lookin that i just love her. her name is yamdaisy!

[justacuppat]

Puppy! I’ve now got Pinkie and Pepper, I just need Ginger (and the girl’s pets).

[bjds--fantasy]

Dream Valley Olivia MSD

[the-woods-call-me]

Penny’s Box Antu “Dreamlike Teaparty”

[taybatwo2]

Measurements of my Trashion Alley doll. -under the cut-

A close up of her hip joint.

How tall she is sitting down.

How her tail is attached.

How far her joints can bend. Her arms can also go all the way above her head.

Height: 19.5 cm

Width (at widest part): 6 cm

Body w/tail depth: 9.2 cm

Body w/tail width: 8 cm

Tail-alone height: 15.5 cm

Tail- alone width: 7 cm

Tail circumference: 1.5 cm

Tail length (if unfurled): 23.5 cm

Tail insert: .5 cm

Foot width: 2 cm

Fore-foot length: 1.5 cm  

Foot length: 2 cm

Foot height: 3.5 cm

Ankle circumference: 3 cm

Calf circumference: 4.8 cm

Knee joint circumference: 3.5 cm

Thigh circumference: 5.5 cm

Thigh ball-joint: 4 cm

Leg height including joint: 13.5 cm

Leg height inseam w/out joint: 12.5 cm

Leg height minus feet: 10 cm

Calf height: 5 cm

Thigh height to tip of knee: 6 cm

Torso height including butt and neck peg: 7.2 cm

Torso height minus neck peg: 6.3 cm

Butt to base of tail hole: 1.2 cm

Hip circumference: 7.5 cm

Waist circumference: 5.1 cm

Under bust circumference: 5 cm

Bust circumference: 6.6 cm

Shoulder width: 2.8 cm

Shoulder depth: 1.2 cm

Shoulder with arm joints width: 3.7 cm

Upper arm circumference at shoulder joint: 3 cm

Upper arm circumference: 2.1 cm

Upper arm circumference at elbow joint: 2.4 cm

Elbow joint circumference: 2.5 cm

Wrist circumference: 1.8 cm

Hand length w/ball joint to middle finger claw: 2.7 cm

Hand length w/out ball joint to middle finger claw: 2.7 cm

Hand ball joint length: .3 cm

Palm length: 1 cm

Hand width w/out thumb: .8 cm

Hand width w/ thumb: 1.4 cm

Hand joint circumference: 1.7 cm

Finger length w/claws-

Thumb: 1 cm

Index: .8 cm

Middle: 1.1 cm

Ring: 1 cm

Pinkie: .8 cm

Arm length w/ball joint: 8 cm

Arm length w/out ball joint: 7 cm

Upper arm length w/ ball joint: 3.4 cm

Forearm length: 3 cm

Neck circumference: 2.8 cm

Neck height: 1 cm

Neck ball joint width: 1 cm

Neck ball joint circumference: 3.3 cm

let me know if anyone has any more questions on her. :)

Also, if you use these on any projects, I would love a shoutout, and I can add you to the list of people who have made 3D replicas with them: Check out @aelith-earfalas and @demonesskneesocks versions of Trashion Alley!!

[izasfaceups]

This little Dream Valley Zhao in white skin was fun to work on. My only sadness is that the wig the owner has on him hides his beautiful forehead painting.

Look below in the post for the video showcasing the beautiful shine of the gold paint!

Want to see more of my work or commission me? Then please check out my website at www[dot]IzasFaceUps[dot]com!

[degobrahh]

Doll repaint I have been working on for the past few months! Dawn!

[otterloreart]

Takara Pony model file (.blender)

Linked is the file for the Takara pony I made (pictured above in pink). As a reminder, this is made from scratch and I don't have my own takara pony but I used as many references as possible. The joints are ball-joints but will require some additional work to use them properly, the joints need a bar across the opening to attach a hook and elastic to.

see below, black bar is a metal rod, blue S is an S-Hook and red is an elastic.

And this would be roughly how to string it, this is inspired by Dollightful's bunny doll but I also advise that the elastic between the legs be pulled upto the hoop as well if possible. The head is not a ball joint, the head + body and head + nose are meant to come together with a peg-in-socket. For the head, the tightness of an elastic should keep it on ideally, but honestly I don't know if the nose will stick in perfectly and might need to be glued, I'm not sure.

In addition to the ball-jointed takara pony, who is 9 separate pieces, I included a simple little sculpt of the "baby pony" takaras. These are just 2-part sculpts and don't need elastics or anything, they have a "peg" and "hole"

Takara baby ponies are already common on the market so I'm not sure if anyone will actually want the babies but I included it anyway. The eyes + nose are just cosmetic, the whole head is just one piece.

Anyways, a reminder that I don't have a 3D printer so I haven't tested it but feel free to download and play with the files and print them yourself if you have a 3D printer! Please credit and also tag me so I can see if someone prints them!

[obscuredollz]

⚜️ French Kitty ⚜️

[xiannavacaloura]

[dollsahoy]

@cosmomoore sent a VIP Pets Roxy that I was holding on to until I got a body with fantasy white plastic, but yesterday I decided to try the head on this 14" "pale but not white" body that @queenofsquids sent--the head fit perfectly, no need to modify anything, and it's a pretty good match proportionally (I mean...well...fantasy dolls are pretty wide open for what seems right in terms of finished proportions 😅) that I think I can overlook the different plastic colors.

[bjd--nude]

Dream Valley Twintail Cat YosD Female