Simple skin & accent tutorial!
I'm only familiar with making accents in CSP so some of the things you see here might be program specific, but for the most part it should be generally applicable.
Okay with that being said, here's a very basic tutorial, under a readmore because it got long (image heavy)
Assuming you already know roughly what you want to make and what breed pose you want to make it on, go to the custom skins page on the sidebar then download PSDs. For this step I'm choosing coatl F!
It should download automatically, the file will be compressed (zipped). I normally just open the folder and move the top file (without elements_friendly) to my accents folder to access it from my art program:
Open your preferred art program and open the file! It is a PSD file so it should be compatible with most art programs. When you open it, everything should look like this:
The layers probably look complicated, and it isn't super clear where you can and can't draw- but I promise it will get easier to understand! Before I even start drawing I do two things: I resize the image (changing the image resolution) to 700px by 700px. This means the image the resize better later on when I need to downscale it to 350px by 350px. Next, I make a new folder under both the existing folders with a single, full white layer in it. And set everything in "Through Skin Parts" to 50% opacity.
Lastly, put the bottom two folders completely out of your mind, we won't be touching them at all. The only folder that matters is "Through Accent Parts". As I'm drawing the accent itself, I make the lines and shadows layer invisible because they can just be distracting, like this:
That layer beneath both lines and shadows layers? The one labelled "Accent Goes Here"? That's where you draw, and you can make more layers to draw more on later. For now you can sketch your design on that layer. Here's my sketch for my skin Strawberry Pavlova:
It's pretty rough at the moment so I want to add another layer to draw my clean line art on, in CSP this means just adding another layer and turning off clipping which automatically applies as the layers above it have clipping turned on. When that's done it should look like this:
(You can absolutely use more layers for lining if that's what you prefer!)
Next is adding colour. An important thing to note for this step is to avoid using colours that are very close to black, and to avoid using black altogether. This is against skin and accent rules as you need lines and shadows to remain visible over your design, and very dark colours make this a lot harder!
When I typically colour my skins and accents I will separate out design elements (so for example all plants on one layer, all blue cloth into another layer, all jewellery on another, etc etc.) into different layers- this is purely to make recolouring easier and isn't necessary. In this case I didn't have my colours separated out as I had no intention of recolouring this skin! This is what this skin looked like when I was finished colouring:
Now I just need to do some final finishing polish on the design! For this one it involves adding a bit of pink transparent colour behind the strawberries, adding pale transparent colour under my lace and of course- adding sparkles! One of the final things I do is recolour my own line art to a red-pink colour (in this case I had it set to multiply as well- but this isn't needed!) this takes some of the harsh edges out of the accent and make the design feel more cohesive imo!
And the design is finished! The final step before we can submit this is a big one! We have to change the lines and shadows that we've been ignoring this whole time. For this I flatten all the art work into one layer, like this:
Why do we have to change the lines and shadows? Well...
The default shadows are pretty high opacity and very grey, they cover up my accent and make the details harder to see. And the default line art is black. You can edit these layers to make them much nicer. You can edit them manually- making sure to lock transparent pixels so you don't edit the coverage of the lines and shadows. Or you can do this: (You can ignore this next part if you're finding it overwhelming) Duplicate your accent design twice (so you have three layers with it on total), set both your lines and shadows layers to normal and unclip them. Your layers will look like this:
Ignore what the accent looks like for now. Next move the copied layers so one is above the lines and one is above the shadows, keeping only one in the original position. And then clip these duplicated accent layers to the layers directly beneath them, it will look like this:
Merge the accent copy layers with its corresponding lines or shadows layer, you should still have 3 separate layers when you're done: The lines, the shadows and your original accent design. Like this:
Then clip both of the lines and shadows onto your accent design layer and set both lines and shadows layers to multiply. Like this:
If you've done it all correctly your accent should now look like this:
This is a lot better than the default lines and shadows already! It's pretty dark in spots and my lines are definitely too light in other places though. So next I usually start by setting my shadows layer to 50% opacity and then going over both lines and shadows layers manually recolouring the lighter parts to a darker colour so they are visible on top of my final design. When you downscale your art to submit it, lines and shadows that were super obvious suddenly vanish- so don't be afraid to downscale it and keep editing the lines and shadows.
Here's what the final product, downscaled to 350 pixels, looks like:
This got accepted first try by skin mods (just in time for valentines!) Important things to note: places where my design is less opaque the lines and shadows are also less visible, this is completely fine! You don't have to fix this. Lines should always be visibly darker than the shadows they're on top of, this means sometimes they will have to be black to get them to show up or you may even have to make your accent underneath lighter to get everything to conform to the rules! Lastly, lines and shadows are subjective and you may end up getting rejected a few times before they're to skin mods liking. Its one of the harder parts of skin making and you won't always get it right.
Community feedback is your best friend, don't create in a vacuum! Go join discord servers where other people are making accents too, ask for help! Now go forth and make!
224 notes
·
View notes
Got my hands on a Ultra Analysis BNHA book from a library
Some points I liked (I focused more on 1B since they don't get a lot of attention)
1B once had a Tetsutetsu BBQ. They heated him up and cooked food on him. He proceeds to ruin it when he declares his sweat is the salt to their food
Yui is canonically the prettiest first-year
Mineta has no sex appeal at all, but he thinks being a hero will make him lucky
Class B does respect Monoma. He's sharp-minded, witty, and has a way with words
Monoma sometimes wanders into 1A's dorm just to throw down a mean speech, and heads back to 1B
Juzo probably isn't helping Monoma's confrontations with 1A, since he just always asks him why he can't say it to their faces whenever Monoma complains about them
Shiozaki tries to be polite even in a fight
Pony hosts anime parties, so 1B knows a lot about anime. Vice-versa, they teach her Japanese, and everything nasty is Monoma's fault
Tokage was a gyaru
Tsuburuaba, Kaibara, and Kuroiro get worked up whenever they talk about girls
Manga likes Kenranzaki
Awase's family runs a small factory. He also restrains Monoma whenever Kendo isn't available
1B likes hearing Rin say "Aiyah", so he does it for them
Kamakiri is obsessed with cutting into things
Class B's play was really successful
Tamaki is scared of Kirishima's energy
1C was planning a send-off party for Shinsou for his upcoming hero transfer. They didn't doubt he would make it, ever since the Sports Festival
Shishikura (meatball Shiketsu boy) might've chosen Shiketsu because he likes the uniform's hat
Nakagame and Yo are dating
Tsuyu's family gets to spend a lot of time together now, since their parents' busy jobs have calmed down
Tsubasa (devil wing kid in Midoriya's memories) suspiciously lost touch with Midoriya and Bakugo in middle school (his Wiki page confirms Garaki - his grandfather - turned him into a Nomu)
Torino likes goofy gags. This rubs off on All Might (ex. when Midoriya thought he died when Torino fell with ketchup. People don't know whether to laugh or be concerned)
Nighteye has yellow streaks in his hair as a homage to All Might
Nezu likes worming into tight, dark places, so he likes Aizawa's scarf. They went into detail, describing why Nezu likes it, such as material to crawling in, etc.
Recovery Girl has to travel around Japan regularly to help people with her Quirk (as in, she uses her Quirk to help them. Healing Quirks are SO rare)
Hojo, Tabe, and Sestuno are kept in the same jail, so at least they're not separated
53 notes
·
View notes
this is the least important thing on earth but sometimes the way we vocal synth fans try to explain what vocal synths are to people who know nothing about them is a little. flawed. LIKE ITS FINE people are doing their best but i keep seeing people explain them in like really vague ways or using confusing words in the definition like stuff like "well a vocaloid is a type of voicebank" or "its a type of virtual singer" and i get a bit frustrated because like Unfortunately if someone doesn't know what a vocaloid is they are definitely not going to know what a voicebank is.
again this isnt that big of a deal and doesnt matter That Much but im pretty good at explaining niche or old or unusual colloquial stuff to laymen so this is always on my mind LOL you have to tailor it to the context and person but i usually start by asking if they are familiar with electric keyboards and/or digital audio workstations like garageband (depending on age) and go from there, maybe explain that its a piece of software but also the importance of the mascot characters representing the software. if they're really interested in the technicalities then we're going back to the 60s with LPC speech coding. BUT ONLY if theyre really REALLY curious. and maybe point on japanese mascot character culture a bit if they're confused.
always remember when expaining niche stuff to people to listen to their questions and try to answer thoughtfully, with consideration to the other person's understanding... (guy who is neurodivergent voice) i think about human interaction in a normal way and my explanation skills are immaculate.
10 notes
·
View notes
Theory: All For One gave Tomura the Decay Quirk
I was thinking this for a while. Midoriya learned that Tenko was originally Quirkless, already being five, so there was no way for him to have the Decay Quirk; All For One gave it to him
Isn't it awfully convenient that right as Midoriya wonders "Who is this guy?", that All For One showed up?
All For One knew Tenko was a blank slate without a Quirk (yet, or at all).
Going back to ch. 235, we see that after Tenko was playing heroes with other kids, he got walked home by a man in a suit
Suit, shadowed face, hat, tall, and Tenko still has black hair? This matches this memory, and we can see there's a lot of shading in the palms
All For One walked home Tenko. He could've given him a Quirk during that time. Right after he brought him home, Kotaro got mad that Tenko was playing and talking about heroes. Already, while Kotaro is upset at him, we see Tenko scratching. According to Nao, his allergies got worse, and if he was just given a Quirk, his allergies could've been fueled by the new Quirk as his body adjusts
Even if it's just a mutation, we do know that his itchiness was related to Decay, since the itching went away after he destroyed what he didn't like (his Quirk revolves around de-constructing and destroying, so natural leanings toward those urges, etc)
Yes, Tenko's Decay may very well just be a mutation like Eri, but I just want to bring one more thing to attention about the theory (All For One gave Decay when walking Tenko home):
When Tomura used Decay and was fighting Re-Destro, back when he only had Decay, Machia was in shock, because it reminds him of All For One long ago. Not only his figure as a ruler that Machia remembers, but All For One could've done the same thing as Tomura (Decay), long ago
22 notes
·
View notes