#CompactDesign

[adafruit]

mini Sparkle Motion prototype - a tiny, fully-featured WLED board ✨🔌📏💡🌈

We're doing a lot of serious testing with our WLED mega-board, code-name Sparkle Motion .

While doing some holiday lighting projects, we also wanted something slim enough to slip into any design. It still uses an ESP32 for the best support, with USB-serial programming, 5A fuse, 5V level shifting + 100 ohm series resistors for pixel drivers, user/reset buttons, a user LED and onboard neopixel, JST SH analog/digital connector, QT I2C connector, 4 GPIO plus power/ground breakouts, and USB type C power/data input.

However, this version is made simpler and less expensive by dropping the DC jack and USB PD support: it's only for 5V strips if you want to power them directly (you could still drive 12V or 24V pixels, but you'll need separate power for them). Instead of a full set of terminal blocks for 3 signals, we only have two outputs, and they have to share the power and ground pins. It could also be used for a single two-pin dotstar LED setup. We kept the built-in I2S mic but dropped the on-board IR sensor - if you want an IR sensor, you'll be able to plug it into the JST SH port with a simple cable or solder it into the breakout pads.

The trade-off is that it's much smaller and slimmer, especially when no terminal blocks are soldered in by default: only 1.2" long x 0.785" wide (~1 sq in) x 0.3" thick vs. the original's 2" x 1.3" (2.6 sq in) x 0.55". To get it that small, we went 4-layer to give us a nice big ground and 5V plane in the middle and double-sided assembly. Coming soon.

[honeyfeed]

Exciting New Look for the Novel Details Page

The Novel Details page has undergone a refreshing redesign, offering users a more streamlined and organized experience. The update brings a cleaner layout, compacting key information at the top and introducing a tabbed interface for better navigation. Here's a breakdown of the changes:

Key Information Compacted at the Top

One of the most noticeable updates is how essential details are now consolidated in a more efficient space at the top of the page. This includes:

Cover Image Resize: The novel’s cover image has been resized for a sleeker display. You can still see the full-size image by clicking on it.

Author Name and Writing Status: Both the author's name and the novel's writing status (e.g., finished or ongoing) are prominently shown. Clicking the author name will redirect you to their profile.

All Counters Moved to Top: View count, reactions, and word count are now grouped together for easy reference.

Last Updated Date and Genres: These details, which were previously shown by scrolling under the chapters, are now compacted and more accessible.

Introduction of Tabbed Interface for Chapters and Novel Details

One of the biggest changes is the shift to a tabbed interface, dividing the page into two main sections: Chapters and Details. This tabbed design declutters the layout, making navigation smoother and more intuitive. Here's how the new tabs function:

Chapters Tab (Default View): Upon visiting the page, users are greeted with the Chapters Tab, displaying the first five chapters of the novel. A link at the bottom—"All Chapters"—allows easy access to the full list of published chapters.

Details Tab: This section has been redesigned to store more in-depth information about the novel. Once clicked, the tab reveals:

Synopsis

Note from the Author

Showcase

This update makes it easier for readers to quickly glance at all the key information without unnecessary scrolling. With the organization of important novel content and a clearer structure, we hope to please both new and returning readers. Please enjoy these changes and look forward to more updates that improve your reading experience! Before:

After:

[lotusyiyen]

[jerdazenglobal]

Many media and users have recommended and praised the JZ200! 👍

The JZ200 is a compact air purifier designed for smaller spaces, featuring an efficient filtration system that ensures you breathe the cleanest air all day long. Additionally, its low noise level, real-time air detection, and screen-off functionality are highly practical.

Click any link to see their reviews: https://androidguys.com/news/jerdazens-jz200-air-purifier-offers-pure-air-and-peace-of-mind/

🛍️ Shop Link: https://linktr.ee/jerdazenglobal

[tubaajuhainah1989]

🚨Introducing the Tank007-E16 Mini Flashlight! 🚨

🚨Introducing the Tank007-E16 Mini Flashlight! 🚨 Your ultimate portable companion is here! 🌟 Compact yet powerful, this multifunctional flashlight offers: 🔦 Mini and portable design 🔦 Adjustable aperture for focused or wide beams 🔦 Adjustable brightness for every situation 🔦 Magnetic tail for hands-free use Perfect for camping, emergency kits, or everyday carry. Back our Kickstarter and be the first to get your hands on this versatile tool!

Kickstarter Campaign: https://www.kickstarter.com/projects/tank007/tank007-mini-portable-dimmable-multifunctional-flashlight?ref=1orokl

[padmavahini]

Padmavahini Pad-Mount Transformers: Compact and Secure Solutions for Urban Power Distribution

What is a Pad-Mount Transformer? A pad-mount transformer is a ground-mounted electric power distribution transformer enclosed within a locked steel cabinet, typically installed on a concrete pad. Designed for urban distribution systems, these transformers efficiently step down primary voltage from underground distribution lines to a lower secondary voltage suitable for utility customers. Their compact and fully sealed design ensures maintenance-free operation and reliable personal safety.

Purpose: Padmavahini's pad-mount transformers are engineered to:

Facilitate efficient power distribution in urban areas with limited space.

Provide a safe and maintenance-free solution for stepping down high-voltage electricity to usable levels.

Ensure reliable operation in underground distribution networks.

Key Features:

Compact Design: Ideal for urban distribution systems and locations with space constraints.

Fully Sealed Structure: Ensures maintenance-free operation and enhances personal safety.

Double Fuse Protection: Incorporates a temperature and current-sensitive plug-in bayonet fuse to safeguard against short circuit faults on the secondary side.

Grounded Metal Housing: Securely encloses all energized connection points, minimizing exposure risks.

Elbow Connectors: Facilitate flexible repair and maintenance, even when the system is energized.

Benefits:

Safety: The fully enclosed design provides reliable protection for personnel and equipment.

Flexibility in Installation: Can be ground-mounted on a concrete pad, offering versatile installation options.

Ease of Maintenance: Elbow connectors allow for straightforward maintenance without system downtime.

Efficient Voltage Regulation: Effectively steps down primary voltage to meet specific secondary voltage requirements.

Conclusion: Padmavahini's pad-mount transformers offer a robust and efficient solution for urban power distribution needs. Their compact, sealed design ensures safety and reliability, making them an ideal choice for modern electrical infrastructure. With features like double fuse protection and ease of maintenance, these transformers are tailored to meet the demands of contemporary urban environments.

[ukvapeworlds]

[radobjectdreamland]

Enclosed Motor Starter Market Trends: Growing Demand for Compact and Efficient Motor Starters in Industrial Automation

Introduction to the Enclosed Motor Starter Market

The Enclosed Motor Starter Market is experiencing significant transformation as industries worldwide accelerate the adoption of automation technologies. These starters, essential for motor control, are evolving to meet demands for higher efficiency, safety, and compactness. Industrial sectors such as manufacturing, automotive, and energy are increasingly integrating enclosed motor starters to optimize equipment performance and reduce downtime.

Rising Demand for Compact Motor Starters

One of the most prominent trends shaping the market is the shift towards compact motor starters. As factories adopt automation and smart manufacturing practices, space constraints and the need for streamlined panel designs push manufacturers to innovate smaller, more integrated motor starters. Compact designs not only reduce installation space but also simplify wiring and maintenance processes, making them highly favored in modern industrial settings.

Enhanced Efficiency and Energy Savings

Energy efficiency remains a critical factor influencing the development of enclosed motor starters. Newer models incorporate advanced electronic components and intelligent controls that optimize motor start-up and operation. These enhancements reduce energy consumption and lower operational costs, aligning with global efforts to improve industrial sustainability. Energy-efficient motor starters also contribute to minimizing heat generation, thus improving the lifespan of connected equipment.

Integration with Industrial Automation Systems

The rise of Industry 4.0 and the Industrial Internet of Things (IIoT) is significantly impacting the enclosed motor starter market. Modern starters are designed to seamlessly integrate with automation systems, enabling remote monitoring, diagnostics, and control. This connectivity enhances operational efficiency by allowing real-time data analysis and predictive maintenance, which helps prevent unexpected failures and reduces downtime.

Growing Applications Across End-User Industries

Industrial automation spans diverse sectors, each with unique requirements for motor control. The enclosed motor starter market caters to industries such as:

Manufacturing: Automated production lines demand reliable and efficient motor starters to control conveyors, pumps, and machinery.

Automotive: Precision and speed in assembly lines benefit from compact starters that provide rapid motor response.

Energy and Utilities: Starters that can withstand harsh environmental conditions are critical for power plants and water treatment facilities.

Construction: Portable and durable motor starters support heavy machinery used in building infrastructure.

The expanding use of motor starters across these sectors contributes to consistent market growth.

Technological Advancements Driving Market Innovation

Innovation in materials and electronics is driving the evolution of enclosed motor starters. Key developments include:

Solid-state starters: Offering silent operation, minimal wear, and enhanced control capabilities.

Smart starters: Featuring programmable logic and communication protocols compatible with modern automation platforms.

Improved enclosure designs: Providing better resistance against dust, moisture, and chemical exposure to ensure safety and reliability.

These advancements empower industries to meet stringent operational and safety standards while boosting productivity.

Challenges and Market Restraints

Despite the positive outlook, the enclosed motor starter market faces challenges such as:

High initial costs: Advanced starters may require significant upfront investment, limiting adoption among smaller enterprises.

Complexity in integration: Some industries may experience hurdles integrating smart starters into legacy systems.

Supply chain disruptions: Raw material shortages and geopolitical factors can impact the availability and pricing of motor starters.

Addressing these challenges through innovation and supportive policies will be essential for sustained market growth.

Future Outlook and Market Opportunities

Looking ahead, the enclosed motor starter market is expected to grow steadily, fueled by ongoing industrial automation and increasing emphasis on energy conservation. Opportunities lie in:

Developing modular and customizable motor starters tailored to specific industry needs.

Expanding adoption in emerging markets with growing industrial infrastructure.

Enhancing connectivity features for predictive maintenance and analytics.

Leveraging advancements in AI and machine learning to improve motor control strategies.

The continued convergence of automation, efficiency, and compact design will shape the future of enclosed motor starters globally.

Conclusion

The Enclosed Motor Starter Market is dynamically evolving, driven by the need for compact, efficient, and intelligent motor control solutions in industrial automation. As industries prioritize energy savings, safety, and operational excellence, enclosed motor starters will remain crucial components supporting the smart factories of the future.

[primeindustrialvalvesmfgco]

When precision and safety are non-negotiable, our Angle Type / Spring Loaded Safety Relief Valve has got you covered. With adjustable pressure, high-capacity flow, a compact design, and temperature compensation, it delivers unmatched reliability and performance, no matter the challenge. Built for those who demand the best in engineering and safety.

For more details, visit- https://www.primevalvesindia.com/products/angle-type-spring-loaded-safety-relief-valve

[netboon]

[oo60sec]

🎥 بروجكتر Magcubic HY450 🔥 دقة 8K وسطوع 900 ANSI ✨ بسعر 548.54 ريال 🚚 شحن مجاني

🎥 Magcubic HY450 Projector 🔥 8K Resolution and 900 ANSI Brightness ✨ For 548.54 SAR 🚚 Free Shipping

[entrepouch7]

Flat Pouch: Minimal Packaging, Maximum Efficiency – Embracing Sustainable Solutions for Today

Designed to hold small items with minimal bulk, a flat pouch offers a slim, compact profile. Made from materials like fabric or leather, it typically features a secure zipper or snap closure. The pouch flat is perfect for organizing essentials while maintaining a sleek and convenient design.

[multipromachines]

Upgrade Your Brake Servicing with Multipro’s High-Quality Brake Lathe Machines! Designed for noise reduction, vibration control, and extended brake pad life, our brake disc drum cutting machines ensure precision resurfacing for compact cars and SUVs. With a compact design and dual spindle functionality, these machines offer efficiency without taking up too much space.

For more details, visit- https://www.multipromachines.com/product/brake-lathes