#Feed Pellet Machine

[hermmachinery]

Factors Influencing the Production Benefits of Feed Pellet Machines

Due to challenges in process design and operational technology, the feed factory faced issues with the quality and output of its finished products. The particles exhibited uneven surfaces, high powder content, brittleness, and inconsistency. A comprehensive practical analysis revealed several critical factors influencing granulation efficiency:

Raw Materials:

Starch Content: High starch content facilitates gelatinization, which, when combined with proper conditioning, creates a conducive, viscous state for effective molding.

Crude Fiber: Elevated crude fiber increases friction in the ring die. The addition of a specific amount of grease aids material passage through the die hole and enhances the surface finish of the final product.

Crushing Diameter: Optimal crushing diameters vary based on raw materials. For instance, using a 2.5-3mm sieve plate is recommended for crushed corn in livestock and poultry feed.

Feed Control:

Comprehensive Monitoring: During periods of reduced production efficiency, addressing pelleting issues alone is insufficient. Comprehensive monitoring of incoming material control is crucial.

Production Operation:

Precise Adjustments: Fine-tuning each part of the poultry feed pellet machine, including the die and pressure roller (controlled at 0.05~0.30 mm), prevents issues such as excessive noise and ensures optimal material granulation.

Gap Control: Maintaining a controlled gap of 2-3 mm between the upper edge curve of the scraper and the die and die cover is critical for smooth pellet feed machine operation.

Start-Up Observations: Careful observation during start-up helps identify irregularities in particle discharge. Preventing the introduction of contaminants into the die contributes to a more efficient granulation process.

Ring Die:

Factors Influencing Material Ejection: Factors like the friction coefficient between the material and the die wall, moisture content, particle size, temperature, plasticity, and compressibility influence the smooth ejection of material.

Conditioning Factors:

Blade Wear Impact: Worn conditioner blades negatively impact material conditioning, affecting particle output and steam absorption.

Material Softening: Proper softening of conditioner material is crucial for achieving the desired pulverization rate and output.

Temperature Control: Specific temperature recommendations, like 70~88°C for livestock and poultry feed, optimize conditioning effects.

Steam Factor:

Steam Conveyance Challenges: Saturated steam entry during conveying results in energy loss and condensed water formation, negatively affecting conditioning.

Condensed Water Management: Discharging condensed water before conditioning and converting it into low-pressure dry hot steam through a pressure-reducing valve enhances conditioning effects.

Pressure and Temperature Control: Maintaining steam pressure above 0.2 MPa and a temperature not lower than 120 ℃ post-decompression ensures an optimized conditioning process.

By addressing these factors systematically, the feed factory can optimize the performance of the feed pellet machine, improving product quality and increasing overall output.

Henan Herm Machinery Co., Ltd was established in 2010 and has been devoted to the research and development of Feed Mill Machinery ever since. With more than 10 years of experience, Herm® has become a leading manufacturer and supplier of animal feed machines and complete animal feed production lines, cattle feed plants, poultry feed plants, animal feed pellet production lines, etc. It always endeavored to improve the quality of products and aims to meet the new requirements of the international market. 

If You Are Ready to Start a Feed Pellet Plant Business, please contact us for the feed mill machine. We Can Provide Professional Design and Comprehensive Guidance According to Your Needs. Get in touch with us now!   Welcome Contact Us! Henan Herm Machinery Co., Ltd Email: info@hermmachinery.com Phone/Whatsapp: 0086-18037508651

[jollyangelhottub]

Best Feed Pellet Machine - Professional Manufacturer & Supplier - Pelletmachine.com

Looking for the best Feed Pellet Machine? Look no further than Pelletmachine.com! As a professional manufacturer and supplier, we offer top-quality equipment. For more information, call us on +86-156 6279 9469 or visit our website.

[richipelletmachine]

undefined

[sanjivaniagromachnery]

[jinanguanbeimachine]

The Newest GXL 560 Pellet Machine Made In China #pelletmachine

Today we will show you our newest wood biomass pellet machine, the GXL 560 pellet machine. You can see this kind of machine has a stainless steel guards and divide the materials below. The 560 pellet machine equipped with a 132kw power, has a production capacity of 1.5t to 2t per hour, and the pellets diameter can be 4-12mm. The production capacity of a 90kw machine is 1t to 1.5t, and the pellets diameter can be 4-12mm. Our company is JINAN SHARE PRECISION MACHINERY CO.,LTD.We are producing pellet machine and complete lines already for 17 years, and our key machines are biomass pellet machine, wood pellet mill, wood chipper, wood crusher, wood hammer mill, rotary dryer, pellet cooler and the complete lines. The output is from several kgs to several tons per hour. If any interest, feel free to connect us. TEL/Wechat/ Whatsapp: +86 15053177578 Email: info@chinapelletline.com megansun@188.com web: www.jnshare.com www.chinapelletline.com

[laxmienterprises]

Feed pellet making machine,chattle animal feeding machine,animal feed pellet making machine.

[vinglobgreentech]

Agriculture Equipments Manufacturers in India | Farm Equipments | Garden Equipments - Vinglob Greentech

Agriculture Equipments Manufacturers in India | Farm Equipments | Garden Equipments - Vinglob Greentech

Elevate Your Farming and Gardening Efforts with Vinglob Greentech: Leading Agriculture Equipments Manufacturers in India

Agriculture is the backbone of India, and the role of modern equipment in enhancing productivity and sustainability cannot be overstated. Vinglob Greentech stands at the forefront as one of the premier Agriculture EquipmentsManufacturers in India, dedicated to revolutionizing farming and gardening practices across the nation.

The Significance of Agriculture Equipment in India

India's agriculture sector is diverse and complex, encompassing a wide range of crops and practices. Whether you are a smallholder farmer or part of a large agribusiness, the right agriculture equipment can make a world of difference. Here's why agriculture equipment is crucial in India:

Enhanced Productivity: Modern agriculture equipment significantly boosts productivity, allowing farmers to produce more with less manual labor.

Time Efficiency: Farming equipment saves time, enabling farmers to focus on multiple tasks and achieve higher crop yields.

Cost Efficiency: By reducing labor costs and increasing output, agriculture equipment contributes to cost-efficiency, benefiting both farmers and consumers.

Sustainability: Many modern farming equipment and techniques are designed to be environmentally friendly, reducing the environmental impact of agriculture.

Precision Agriculture: Equipment like precision seeders and harvesters enables precise planting and harvesting, optimizing resource utilization.

Vinglob Greentech: Pioneering Agriculture Equipment Manufacturers in India

Vinglob Greentech is a name synonymous with innovation, quality, and reliability in the field of agriculture equipment manufacturing. Here's why they are the preferred choice for farmers and gardeners across India:

Wide Range of Equipment: Vinglob Greentech offers an extensive range of agriculture equipment, catering to diverse farming and gardening needs. Whether you're cultivating crops, tending to a garden, or managing a sprawling farm, they have the right tools for you.

Innovative Solutions: The company is committed to staying at the forefront of agricultural technology. They continuously innovate and adapt their equipment to meet the evolving needs of Indian farmers.

Quality Assurance: Vinglob Greentechplaces a premium on quality. Their equipment undergoes rigorous testing and quality checks to ensure durability and performance in the field.

Affordability: The company believes that modern agriculture equipment should be accessible to all. They offer competitive pricing without compromising on quality.

Dedicated Customer Support: Vinglob Greentech is not just about selling equipment; they are committed to providing comprehensive support to their customers. From product selection to after-sales service, they are there every step of the way.

Agriculture Equipment Offerings

Vinglob Greentech's product portfolio spans a wide spectrum of agriculture and gardening equipment. Here are some of their key offerings:

Tractors and Tillers: Vinglob Greentech manufactures a range of tractors and tillers, from compact models suitable for small farms to powerful tractors for large-scale agriculture.

Seeders and Planters: Their precision seeders and planters ensure accurate and efficient planting, reducing seed wastage and optimizing crop yield.

Harvesters: The company offers a variety of harvesters for different crops, making the harvesting process faster and more efficient.

Irrigation Equipment:Vinglob Greentech provides a range of irrigation solutions, including drip irrigation systems, sprinklers, and pumps, to ensure optimal water management.

Garden Tools: For gardening enthusiasts, they offer a selection of garden tools and equipment, including lawnmowers, hedge trimmers, and more.

Cultivators and Ploughs: Their cultivators and ploughs are designed to prepare the soil for planting, ensuring a healthy and productive crop.

Embrace Modern Agriculture with Vinglob Greentech

As India's agriculture sector continues to evolve, embracing modern farming and gardening practices becomes increasingly important. Vinglob Greentech empowers farmers and gardeners with high-quality, innovative agriculture equipment that enhances productivity, sustainability, and profitability.

Whether you're a traditional farmer looking to modernize your operations or a gardening enthusiast seeking efficient tools, Vinglob Greentech has you covered. Contact them today to explore their wide range of agriculture and gardening equipment and embark on a journey towards more productive and sustainable farming and gardening practices. Elevate your agricultural endeavors with Vinglob Greentech, your trusted partner in agriculture equipment manufacturing in India.

For More Information

https://www.vgtindia.in/products.php

A/2, Bharat Small Industrial Estate, Pin Code :- 382445

B/H. Gujarat Offset, Vatva, Ahmedabad,

7984030141 | 9909793721

vinglobgreentech2016dd@gmail.com

visiongreentechindia@gmail.com

[deekayoverseas]

Deekay Overseas is a leading manufacturer and exporter of animal feed pellet machine. We offer a wide range of pellet machines in various sizes and models to suit the needs of different types of animals. Our machines are designed to produce high-quality feed pellets with minimum labor and cost. The machines are also equipped with advanced safety features to ensure the safety of operators. Deekay Overseas also offers after-sales service and maintenance of their machines.

[sagarg889]

Fish Feed Pellet Making Machine Market Outlook, Current and Future Landscape Analysis 2023 to 2033

The global fish feed pellet making machines market is expected to reach US$ 2,167.9 million in 2033, growing at a 5.6% CAGR between 2023 and 2033. The market is expected to reach $1,257.2 million by 2023.

According to FMI, increased exports of fish and other seafood products from various countries around the world are expected to drive market sales. International companies are expected to enter emerging economies in order to capture the overall industry.

Furthermore, rising awareness of the importance of sustainability as well as animal welfare is expected to boost sales of organic farming. As a result, fish farmers use organic farming methods to provide chemical-free and genetically modified products.

The growing consumer preference for organic foods is expected to compel key manufacturers to increase their organic feed production capacity. Other factors that would accelerate market sales include changing eating habits and lifestyles of consumers in both developed and developing countries.

Request a Sample to Obtain Authentic Analysis @ https://www.futuremarketinsights.com/reports/sample/rep-gb-16533

Key Takeaways from the Fish Feed Pellet Making Machine Market Study:

Top 3 countries in the global fish feed pellet making machine market are projected to generate a share of 8% in the next ten years.

The global fish feed pellet making machine market is estimated to be valued at US$ 1,190.5 million by the end of 2022 from a valuation of US$ 1,006.0 million in 2018.

The USA fish feed pellet making machine market is anticipated to generate the lion’s share of nearly 8% by 2033.

Germany fish feed pellet making machine market is predicted to account for a considerable share of about 3% in Europe during the estimated time frame.

In Asia Pacific, India is likely to witness moderate growth and exhibit a CAGR of 3% from 2023 to 2033.

“Key companies in the fish feed pellet making machine market are anticipated to invest huge sums in the manufacturing of dry pelleted fish feed. This type of feed is projected to be extensively used for improving digestibility and balance of nutrients for matching specific needs of various fish species,” says a lead analyst at Future Market Insights.

Competition Landscape: Fish Feed Pellet Making Machine Market

Leading players in the fish feed pellet making machine market are CPM Asia, Andritz Group, Buhler AG, Salmco Ltd., and Zhengchang Group among others. These companies are aiming to strengthen their positions in the global market by launching state-of-the-art equipment. A few other players are striving to generate more shares by joining hands with local companies across the globe.

Get Valuable Insights into Fish Feed Pellet Making Machine Market

FMI, in its new offering, provides an unbiased analysis of the fish feed pellet making machine market presenting historical demand data (2018 to 2022) and forecast statistics for the period from (2023 to 2033). The study divulges compelling insights on the demand for fish feed pellet making machine market based on type (ring die pellet mill, flat die pellet mill), by application (small-scale aquaculture, large-scale aquaculture, others), by sales channel (online, offline), and by region (North America, Europe, Asia Pacific, Latin America, the Middle East and Africa).

For More Information on this Report @ https://www.futuremarketinsights.com/reports/fish-feed-pellet-making-machine-market

Fish Feed Pellet Making Machine Market Outlook by Category

By Type:

Ring Die Pellet Mill

Flat Die Pellet Mill

By Application:

Small-Scale Aquaculture

Large-Scale Aquaculture

Others

By Sales Channel:

Online

Offline

By Region:

North America

Europe

Asia Pacific

Latin America

MEA

RoW

[hermmachinery]

HMLH350 Feed Pellet Mill

Feed Pellet Mill Introduction The HMLH350 feed pellet machine is one of the indispensable pieces of equipment in the feed mill plant. It can be used alone or in the feed pellet production line. The feed pellet maker machine can make various animal feeds: ruminant feed, such as cattle feed, sheep feed, and camel feed; livestock feed, such as horse feed, pig feed, rabbit feed; poultry feed, such…

[westkisswigs]

Add green roughage to grass chickens

With the continuous rise of feed prices, it is necessary and feasible to add a certain amount of green roughage to the diet of grass chickens, but the following issues need to be paid attention to during the addition process:

Different feeding methods are adopted according to different growth stages of grass chickens. Chickens are fed with concentrate, and about 20% of chopped green vegetables can be added to the concentrate from the age of 4 days. Due to the small capacity of the esophagus, it should be fed less frequently, so that the chicks can form a good conditioned reflex for food, and lay the foundation for them to forage grassy food in the pasture after dewarming.

When the grass chickens are 36 to 80 days old, grazing can be adopted if conditions permit. During the grazing period, pay attention to supplementing the grass chickens with full-price ingredients in the morning and evening. If there is no condition for stocking flocks, green roughage can be added to the diet at a ratio of 1:1. The feeding method is to feed a single full-price feed to the chickens first, and then put the same amount of green roughage in the feeding bucket after 1 hour, so that the chickens can eat freely. The feeding amount of green roughage can be appropriately reduced 15 days before the grass chickens are released to help shorten the fattening period and increase the daily weight gain. And you can use the animal feed machine.

The use of green roughage should be combined in a variety of ways to ensure quality. None of the green forages have comprehensive nutritional value. If they are matched in various ways, they can complement each other, improve the utilization rate of various amino acids in the feed, and reduce the cost of the feed. For example, legume feed is matched with grass feed, aquatic feed is matched with sweet potato vine powder or flour, but straw powder should not be matched with husk, rice husk, and bran.

Pay attention to the processing and modulation of green roughage. The green roughage is best to be chopped, beaten and mixed with the concentrated feed. If it is stored for too long or is simmered, it may cause nitrite poisoning or even death of grass chickens. Forages such as sweet potato vine, bitter vine, peanut vine, alfalfa and champagne grass should be dried immediately after harvesting, and their integrity should be kept as far as possible.

Ensure the uniform supply of green roughage throughout the year. Affected by the seasons, the supply of green forage in many areas in our province is not balanced throughout the seasons, but as long as the planning of forage planting is strengthened, this problem can be solved. For example, plant chicory, Rumex, and alfalfa in spring; plant champagne grass and amaranth in early summer; plant vetch, winter cabbage, and cabbage in winter.

Any questions, you can come to lima contact.

[richipelletmachine]

undefined

[waterwavehair]

The ways of eworming chickens

Do you have a chicken farm? Maybe you can go to see the article which is about the ways of eworming chicken.

Deworming method:

1. In the process of first-line treatment, we often classify them into one category. Now the levamisole and other anthelmintics on the market can achieve very good prevention and control effects.

2. For free-range chickens, deworming starts at about 50 days of age. At this time, the chickens have basically been cold, and it is easy to ingest the eggs in the free-range state. At this time, the first deworming will begin. After the first deworming, 7 days later, another deworming will be carried out to ensure that the eggs in the chicken body will regenerate adults and be killed more thoroughly.

3. In the future, deworming will be performed every 40 days or so. This kind of flock will be healthier and grow evenly in the later period, and the farmers will reduce a lot of unnecessary damage.

4. Tobacco leaves repelling chicken insects: Feeding chickens with tobacco leaves soaked in water can repel chicken roundworms and chicken tapeworms. The method is: take an appropriate amount of yellow tobacco leaves, dry and crush them, add 2 kg of water to 1 kg of tobacco leaves and soak for one day and night, and wait until the tobacco leaves are reddish-brown in water. Be careful not to feed the chickens 14 hours before feeding the tobacco powder. For the first 4 hours, you can feed 2 spoons of 1% salt water and an appropriate amount of water. Then, fill each chicken with 5 ml of tobacco powder, 3 days apart, and then feed according to the above method. A few times, it can get rid of chicken roundworms and chicken tapeworms.

Treatment measures:

For roundworms and nematodes, use albendazole ivermectin powder and mix it evenly with the feed according to the usual amount. Allow chickens to eat or drink freely. The effect of taking the medicine on an empty stomach is better. This method has ideal deworming effect and is safe. During the deworming of chickens, the feces of the chickens should be cleared in time and accumulated and fermented to kill the eggs. At the same time, thoroughly clean and disinfect the chicken house, utensils, and grounds.

Deworming chickens

In addition, in order to prevent the occurrence of chicken parasitic diseases, we must pay attention to the management of the environmental sanitation of the chicken house. When medication, we must choose a wide range of deworming drugs. Try to use small doses that can be used for group deworming to prevent the worms from developing resistance. Sex, improve insecticidal effect.

And I must tell you that the feed pellet cooler, flat die feed pellet machine, and the feed dryer machine will be used in the processing line.

[morganas-pendragons]

how long | the master chief

people have been digging up my master chief fanfiction with the release of halo season 2. so. here's a new one shot ft my favorite shot of the show! Spoilers for episode 1!

this will be multiple parts as we span throughout season 2. this is loosely associated with you're losing me by Taylor Swift!

A couple of tags for people who've come my way recently wanting Chief fic... @silverpelt3600 @embarrassedauthornerd (who is still getting a Game!John fic at some point) and I know there were more but I literally can't remember :(

***

Being a part of Silver is unlike anything you’ve ever experienced before. It’s a team. A unit. You aren’t forced to rely on old instincts of survival on your own when you have Master Chief Petty Officer Sierra 117 covering your back.

John. Your John.

My beloved.

He hadn’t been the same since Cortana was removed from his head. You knew why. It was like losing a crucial part of himself, and no one still knew where she was. You both felt her loss so acutely.

You still sometimes turned to call out, “Little love?” In the darkness of your quarters, and waited for “Soles..” to echo back at you. The nickname she’d given you herself.

She’s not dead, but she might as well be.

You had initially suspected that Parangonsky had something to do with it. The woman was as conniving as Halsey, choosing to own the facade of the imperfect military leader with a world of decisions on her shoulders to bear. Her own cross. Just like Halsey.

No one bothered asking though, so neither did you. You and Kai continued to work as The Master Chief's shadows as the months passed. Mission after mission became civilian evacuation after evacuation. ONI was not letting you into combat.

May have something to do with the fact that the entirety of Silver has taken out their inhibitor pellets.

You repositioned yourself between Kai and Vannak as the three of you peered out over the cliff face you were occupying on Sanctuary. "Babysitting duty," Vannak muttered. "Aren't we better than this?"

You snorted and flexed your finger against the trigger of your assault rifle. "We're here to keep an eye on Chief. And this complaint is coming from the guy who indulges in documentaries for fun," You mutter, to which Kai also breaks out into laughter. "And feeds his pigeons."

"I'll have you know-"

Kai nudged your shoulder as John and Riz approached the group of civilians where Captain Shepherd was currently trying to coax their leader, a native priestess, into evacuating. "Shut up and pay attention you two," She teased. "Looks like Captain Shepherd is trying to work on his negotiation skills."

The UNSC had sent the five of you to Sanctuary to evacuate before the Covenant arrived to glass it. That had been happening to a lot of colonies recently.

More often than not, you found yourself huddled next to John in his cot on the nights that the dead just would not stop screaming. It was easier to deal with when you were The Lone Headhunter. When you had your pellet.

When you were more machine.

"This would be so much easier if Cortana was around." You whisper to yourself, thankful that neither of them pay attention to your statement. The AI had become a welcome friend and presence in your life since you'd found yourself becoming closer to The Master Chief. Since you'd found yourself loving him. Loving John.

John hadn't been John in... six months. And you missed him.

They never did say loving from afar was easy.

By the time you were properly paying attention again, John was communicating his position through TEAMCOM as he took off toward the upward cliff face that would lead to where Bravo Team was at. A nagging feeling gnawed at your stomach as you stood to your feet.

"Where is he going?"

"To retrieve Bravo," Vannak replied as he pressed his hand against the side of his helmet. "Comm signal is static. Can't get a clear answer. Seems like there's some type of interference from the relay."

You were already on your way towards John’s location being displayed in your HUD. There was no way you were going to let him do something like that on his own. Especially with his emotions being at such a heightened state since Cortana’s removal, you didn’t quite trust him to make a logical decision right now.

You stopped at the base of the cliff. The fog above loomed above menacingly, like a bad omen waiting to make itself known. You still couldn’t shake the sinking feeling in your stomach.

“Silver One, this is Silver Five. Come in.”

Static.

Cursing under your breath, you steadied your feet and activated the grapple shot recently installed to your Mjolnir. The tech’s had done it per The Chief’s request. Something about needing his most lethal and stealthy team member to be able to utilize that skill to the best of their ability.

Quick, quiet.

The grapple shot up into the fog and took you along with it.

***

How long has it been?

You ask yourself this question every night you sneak into his bunk while Silver sleeps on either side of you. John sleeps at the far end, prone with his arms at his sides, hazel eyes cast toward the ceiling. This is your curse. You cannot sleep without hearing the screams of those you know who have died.

Those you failed to save.

How long has it been since I've seen John? The real John?

You wordlessly settle at his side when his arm comes up to allow you to tuck yourself into him. Despite being only a few inches apart in height, you automatically feel safer with your cheek pressed against his chest and the bulk of his muscle sheltering you from any outside threat.

It's the whisper of your name that catches you off guard. "Soles.." John's voice cracks in the darkness as you lift your head high enough to meet the gaze that stares back at you. Despite how much he's changed since losing Cortana, you can still see remnants of the very broken man he has been trying so hard to hide. "When does it end?"

"When does what end, John?"

"The war."

You know very well he isn't talking about the Human-Covenant War. He's talking about the internal war that Spartans face when they're able to feel too much. The conflict of being made to be more machine then man. More soldier. Being forced to execute orders despite knowing they're morally wrong.

"I don't know.. but I don't think it ever will."

How long has it been, since the two of you had been able to just enjoy each other? To be at peace?

***

Too long.

You were barely able to get your footing before a hand was wrenching you into the dark. Your visor tipped upward to meet the glowing gold of The Master Chief's before you, just barely concealing the lone marine who stood petrified behind him.

"You shouldn't have come, Silver Five."

You shrug noncommittally. "I don't care, Chief. Sitrep." You remarked sharply as the two of you moved to pull the girl between you. It was the only way she'd be protected without any kind of armor to shield her from the threat in the fog.

"Something's in the fog. The Covenant were here before we were-"

It's only then that you see the Elites lingering in the shadows. Decades of instincts and training immediately kick into gear as you remove your weapon from your belt - a newly obtained energy sword, courtesy of the last high ranking Elite who'd tried to rush you - and activated the blade before charging at your nearest opponent.

Blood spattered against your armor while John continued to cover you from behind. They yell at you. Mock you. Call you Demon. You know enough to understand that singular word in their mother tongue.

You cut them down anyway. You are Sierra-343. You are built for this.

But ONI is determined to keep you from it.

***

The glassing beam is terrifying. You haven't quite been afraid for your life in a long, long time... but the stinging heat that comes from it sears the back of your armor as you sprint across the field to the Condors.

The Priestess was not about to let The Master Chief leave the planet without prophesying over him.

"Find your faith, Spartan. I have seen your death." Her eyes slowly shift to your fingers wrapped around The Master Chief's wrist, desperately urging him forward to the Condors where Kai and Vannak were waiting for you. "You are not long for this world. It comes soon. "

How long?

You're running against the clock as the three of you sprint into the Condor just in time for it to take off. Breathless, you cast aside your helmet to stare at the amber hue of fire as Sanctuary is overcome by the glassing beam from the Covenant Carrier.

***

Ackerson spent the first several days of his time in ONI working on you. As his Lone Headhunter, he saw you as an asset to utilize with a skill that far outweighed Silver Team combined.

"Do you think that at his core.. The Master Chief is broken?"

Unarmored and dressed in your civilian clothing, you stared out at the open expanse of Reach City right beyond the window.

“I think that The Chief is a human being who had undergone a significant amount of trauma in a very short amount of time. I think ONI overlooks that because the only use he has to them is to be the hero you need on the front lines of a war we’re not going to win,” You replied coldly, turning around to face Colonel Ackerson with your hands neatly folded behind you. “Do you have any other questions that pertain to my role in Silver Team or my history as a Headhunter, sir?”

“I am not your enemy here. You know that. You’ve undergone some of the most extensive types of torture under covenant hands from your time on The Exalted.” You froze at the remark, disdain and anger flashing across your gaze as you met his eyes. “You are remarkable. Resilient. I want that for the future of what we have here. I do not wish for such contempt to come between us.”

“Then I would prefer you keep my past and my trauma out of conversation.” You motion towards the door to ONI’s main office. “Am I free to go?”

Ackerson flashed a tight-lipped smile. He knew you would be the most difficult to crack on Silver Team. Kai had said as much. Given your involvement with the Spartan Two program and how quickly you'd taken to working with a team, he'd anticipated you would be loyal to them.

He hadn't anticipated the extent of how loyal you'd be to The Master Chief though. There must've been something there. Something else the others didn't know about.

"Yes, you are. Thank you for speaking with me."

You bit the inside of your cheek so hard that you tasted blood as you and John locked eyes passing one another in the main doorway of the ONI office.

He'll have questions for you later.

***

Kai caught John's gaze wandering to you as you and Riz continued working on your hand-to-hand on the gym floor. There was just something so graceful about the way you moved, and the way you looked...

"Hey, Chief," Kai's voice broke through his reverie as John turned away from you to gaze at the monitors near the lockers. "Come take a look at this."

You narrowly avoided an uppercut to the jaw as you attempted to tune into Keyes speech where he was awarding Talia Perez a Colonial Cross. You knew the truth though. A truth that Ackerson was not hearing, and a truth that John had attempted to get Ackerson to reveal during their meeting.

He didn't breathe a word. And unfortunately, when he'd intercepted you an hour later, neither did you.

How long since you stopped trusting me, Soles?

"Turn it off." Vannak demanded. "I've heard enough from this guyat debrief."

"What questions did he ask you?"

The main point of conversation between you both again rang in your ears as Riz moved to sweep your legs out from beneath you. Do you think that The Master Chief is, at his core, broken?

Dread bubbled in your stomach. Did he know?

Did Ackerson know about you two?

You didn't have enough time to react as Riz swept your legs out from underneath you just as Cobalt Team walked into the room. You didn't bother learning any of their names. You just knew you hated the blonde one the most.

Riz extended a hand to you just as she approached you both. "You see, this is why you don't go taking your pellet out. Makes you emotional." Cold blue eyes regarded you as you both stepped into her space. "Makes you weak."

Your eyes narrowed. "You know, for someone who's barely encountered The Covenant.. Tell me. Who endured torture at the hands of high-ranking Elites aboard a Covenant Cruiser for months before I got myself out?"

"And who's to say you're not a whining Covenant sympathizer now?"

Rage flashed behind your eyes as you lunged and very nearly caught Val, had it not been for John winding his arms through yours to keep you from making a rash decision.

You weren't paying attention to anything else that was said until Cobalt was gone. John bent to whisper in your ear, "Stop trying to get yourself killed, Soles."

You wrenched yourself from his grasp and jabbed your finger into his chest angrily. You weren't mad at him, persay. You were mad at the place that loving him had put you in. That loving him was now a way to be exploited. And you swore you wouldn't be in that position again when Halsey was gone. When you became part of Silver.

"Then stop trying to protect me, Master Chief."

But they had spent years telling you a very simple truth: You were a machine created to serve a singular purpose. Machines were not conditioned to feel.

And they certainly did not love.

***

You didn't come to John's bed that night. You didn't come for quite a while after that, and he then determined that you were the one thing he feared you to be.

A liar.

And he didn't understand why you were hiding it. Why were you hiding what happened on Sanctuary, and why were you avoiding Ackerson? What had he asked you?

Why were you running?

***

He wasn't expecting this. The whole point of coming to this place was to find some semblance of her, something that offered comfort in the way Cortana would have if she were here.

She wasn't dead, but she may as well be.

He swiped his credit chit and sat down with his hands in his lap. "I don't really know what people say to each other. And the one person I want to talk to right now is..." John swallowed the knot in his throat. "Isn't themselves. And I'm-"

"Lost?"

"Yeah. I think there might be something wrong with me. That's why they ran. They figured out there's a part of me that's missing. Sometimes there's a sound like something in my head is there that doesn't belong. And maybe it's part of you that got embedded in me."

"Oh, sweetie... You miss them, don't you?"

John grimaced. He did. He did miss you and Cortana. He'd give anything to go back to that medical table where he'd kissed you the first time.

He was so deeply engrossed in his memory of Sanctuary, of seeing Makee, of hearing her voice, that he didn't even notice you come in. You stood in the doorway with your hood concealing your face and slowly lowered it as John stared up at you in shock.

There wasn't just shock there though. There was... desperation.

How long since you willingly let someone in?

"Soles?"

"John. We need to talk."

part two?

[sanjivaniagromachnery]