#SPI Controller IP core

[dondadon8]

UBTECH UGOT kit-AI Space Exploration version - ROBOSTEAM

https://robosteam.ro/product/ubtech-ugot-kit-ai-space-exploration-version/

Arduino GIGO R1 WIFI is the moat powerfull Arduino board ever, the GIGA R1 is based on the same microcontroller as thr Portenta H7, the STM32H747. The Arduino I/O pin can handle 40ma as an absolute maximum without damage to the Arduino. The STM32H7x7 lines combine the performance of the Cortex-M7 (with double-precision floating point unit) running up to 480 MHz and the Cortex-M4 core (with single-precision floating point unit)

- PERFORMANCE

480 MHz fCPU on the Cortex-M7, 240 MHz on the Cortex-M4, 3224 CoreMark / 1327 DMIPS executing from Flash memory with 0-wait states thanks to its L1 cache

L1 cache (16 Kbytes of I-cache +16 Kbytes of D-cache) boosting execution performance from external memories

- Security

Crypto/hash hardware acceleration, secure Firmware Install (SFI) embedded, security services to authenticate protect your software IPs while performing initial programming

Secure Boot Secure Firmware Update (SBSFU)

Power efficiency multi-power domain architecture enables different power domains to be set low-power mode to optimize the power efficiency. Embedded SMPS to scale down the supply voltage, supply external circuitry , combined with the LDO for specific use cases. USB regulator to supply the embedded physical layer (PHY).

145 µ/MHz typical @VDD = 3.3 V and 25 °C in Run mode (peripherals off) and SMPS

2.43 µA typical in Standby mode (low-power mode)

460 nA typical in VBAT mode with RTC (low-power mode)

- Graphics

LCD-TFT controller interface with dual-layer support MIPI-DSI interface for driving the DSI display Chrom‑ART Accelerator™. boosts graphical content creation while saving core processing power, thus freeing up the MCU for other application needs JPEG hardware accelerator for fast JPEG encoding and decoding, off-loading the CPU

- Embedded peripherals

Up to 35 communication interfaces including FD-CAN, USB 2.0 high-speed/full-speed. Ethernet MAC, Camera interface

Easily extendable memory range using the flexible memory controller with a 32-bit parallel interface, or the Dual-mode Quad-SPI serial Flash memory interface.

Analog: 12-bit DACs, fast 16-bit ADCs

Multiple 16- and 32-bit timers running at up to 480 MHz on the 16-bit high-resolution timer

[howzitsa]

TP-Link Archer AX20 AX1800 Dual Band Wifi 6 Router FEATURES: Dual-Band Wi-Fi 6: Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity, and reduced network congestion Next-Gen 1.8Gbps Speeds: Enjoy smooth streaming, downloading, and gaming all without buffering with Wi-Fi speeds of 1.8Gbps Connect More Devices: Wi-Fi 6 technology communicates more data to more devices using revolutionary OFDMA technology while simultaneously reducing lag Quad-Core Processing: The 1.5GHz quad-core CPU ensures communications between your router and all connected devices are smooth Extensive Coverage: Beamforming, independent FEM, and four antennas combine to deliver focused reception to devices far away Increased Battery Life: Target Wake Time technology reduces your devices’ power consumption to extend their battery life USB Easy Sharing: A USB 2.0 Port enables easy file sharing within your network or building private Cloud Storage Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App Backward Compatible: Supports all previous 802.11 standards and all Wi-Fi devices WIRELESS Standards Wi-Fi 6 IEEE 802.11ax/ac/n/a 5 GHz IEEE 802.11ax/n/b/g 2.4 GHz WiFi Speeds AX1800 5 GHz: 1201 Mbps (802.11ax) 2.4 GHz: 574 Mbps (802.11ax) WiFi Range 3 Bedroom Houses 4× Fixed High-Performance Antennas Multiple antennas form a signal-boosting array to cover more directions and large areas Beamforming Concentrates wireless signal strength towards clients to expand WiFi range High-Power FEM Improves transmission power to strengthen signal coverage WiFi Capacity High Dual-Band Allocate devices to different bands for optimal performance OFDMA Simultaneously communicates with multiple Wi-Fi 6 clients Airtime Fairness Improves network efficiency by limiting excessive occupation 4 Streams Connect your devices to more bandwidth Working Modes Router Mode Access Point Mode HARDWARE Processor 1.5 GHz Quad-Core CPU Ethernet Ports 1× Gigabit WAN Port 4× Gigabit LAN Ports USB Support 1× USB 2.0 Port Supported Partition Formats: NTFS, exFAT, HFS+, FAT32 Supported Functions: Apple Time Machine FTP Server Media Server Samba Server Buttons WPS/Wi-Fi Button Power On/Off Button LED On/Off Button Reset Button Power 12 V ⎓ 1.5 A SECURITY WiFi Encryption WPA WPA2 WPA3 WPA/WPA2-Enterprise (802.1x) Network Security SPI Firewall Access Control IP & MAC Binding Application Layer Gateway Guest Network 1× 5 GHz Guest Network 1× 2.4 GHz Guest Network VPN Server OpenVPN PPTP SOFTWARE Protocols IPv4 IPv6 Parental Controls URL Filtering Time Controls WAN Types Dynamic IP Static IP PPPoE PPTP L2TP Quality of Service QoS by Device Cloud Service Auto Firmware Upgrade OTA Firmware Upgrade TP-Link ID DDNS NAT Forwarding Port Forwarding Port Triggering DMZ UPnP IPTV IGMP Proxy IGMP Snooping Bridge Tag VLAN DHCP Address Reservation DHCP Client List Server DDNS TP-Link NO-IP DynDNS Management Tether App Webpage PHYSICAL Dimensions (W×D×H) 10.2 × 5.3 ×1.5 in (260.2 × 135.0 × 38.6 mm) Package Contents Wi-Fi Router Archer AX20 Power Adapter RJ45 Ethernet Cable Quick Installation Guide OTHER System Requirements Internet Explorer 11+, Firefox 12.0+, Chrome 20.0+, Safari 4.0+, or other JavaScript-enabled browser Cable or DSL Modem (if needed) Subscription with an internet service provider (for internet access) Certifications FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉ ~104℉) Storage Temperature: -40℃~70℃ (-40℉ ~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing TEST DATA WiFi Transmission Power CE:

[techtease]

PiSquare: RP2040 & ESP-12E-based board for all Raspberry Pi HATs

PiSquare is a compact, wireless communication board designed for Raspberry Pi that enables you to wirelessly connect and communicate with multiple Raspberry Pi HATs including SPI, I2C, and SPI HATs. It is based on two powerful components:

⦁ The RP2040 microcontroller (the same chip used in the Raspberry Pi Pico). ⦁ The ESP-12E Wi-Fi module for seamless wireless communication.

By using socket programming, PiSquare can wirelessly interact with Raspberry Pi HATs through TCP/IP communication, allowing you to connect as many devices as you need, without worrying about physical stacking or GPIO conflicts.

Key Specifications:

⦁ Microcontroller: Raspberry Pi RP2040

Core Architecture: Dual-core ARM Cortex-M0+ microcontroller

Clock Speed: Up to 133 MHz

Flash Memory: 2MB onboard QSPI Flash (for program storage)

RAM: 264KB SRAM

GPIO Pins: 26 multi-function GPIO pins with support for PWM, SPI, I2C, UART, and other peripherals

⦁ Wi-Fi Connectivity: ESP-12E

Wi-Fi Standard: 802.11 b/g/n

Wireless Frequency: 2.4 GHz

Wi-Fi Chipset: ESP8266 (with 4MB of onboard Flash)

Data Rate: Up to 72.2 Mbps (with 802.11n support)

Communication Interface: UART (Universal Asynchronous Receiver Transmitter)

⦁ Wireless Communication via Socket Programming

Protocol: TCP/IP (Transmission Control Protocol/Internet Protocol) via socket programming

Connection Type: Full-duplex, bi-directional communication

Network Type: Local Area Network (LAN) or Wi-Fi based network for device communication

Number of Supported Devices: Configurable for communication with multiple (n) Raspberry Pi HATs over Wi-Fi without the need for physical stacking

Socket Layer: Raw socket-based communication for sending and receiving data over the network

⦁ HAT Compatibility

Supported Protocols: SPI (Serial Peripheral Interface): Full-duplex, synchronous communication for connecting peripherals

I2C (Inter-Integrated Circuit): Multi-master, multi-slave communication for sensors, actuators, and peripheral devices

GPIO-based HATs: Supports a variety of devices and sensors with GPIO pin control

Pin Multiplexing: Flexible I/O pin assignment allowing for easy configuration of multiple communication protocols simultaneously

Addressing: Supports unique addressing for SPI and I2C devices to avoid conflicts

⦁ Power Supply

Voltage: 5V DC ±5% (typical operating voltage range)

Power Consumption: Low-power operation suitable for remote or battery-powered applications

Regulation: Onboard linear voltage regulator to provide stable power for the microcontroller and Wi-Fi module

⦁ Form Factor

Dimensions: 65mm x 30mm x 20mm (compact design suitable for integration into small devices)

Mounting: Compatible with standard Raspberry Pi connectors (via external interface) without the need for physical GPIO stacking

⦁ I/O and Expansion

Interface: UART, SPI, I2C (for communication with external peripherals)

GPIO: 26 GPIO pins for signal input/output, including support for digital, analog, PWM, and interrupts

Use Cases

Here are a few ways PiSquare can revolutionize your Raspberry Pi projects:

Multi-HAT Robotics: Easily connect multiple HATs for motor control, sensor arrays, and communication modules in a wireless setup.

IoT Projects: PiSquare can communicate with several sensor HATs in remote locations, sending data back to a central Raspberry Pi for processing or cloud storage.

Home Automation: Connect a variety of home automation HATs wirelessly, creating a smart home system that’s efficient and scalable.

Distributed Sensor Networks: Set up multiple sensors across a large area without worrying about physical connections or pin conflicts.

The Pisquare RP2040 with the onboard ESP-12E Wi-Fi module is a powerful and compact solution for anyone looking to build wireless IoT projects. Its support for multiple HATs, including SPI and I2C, makes it versatile enough to handle a wide variety of peripherals, while its ability to implement socket programming provides you with the flexibility to create robust networked applications.

Whether you're creating a smart home system, an industrial IoT device, or a robotics project, the Pisquare by SB Components can be the perfect foundation for your next creation.

[ovaga-technologies]

ATMEGA128-16AI Datasheet, Features, Pinout, and Applications

Update Time: Jun 20, 2024      Readership: 321

Overview of the ATMEGA128-16AI

The ATMEGA128-16AI is a highly integrated microcontroller, equipped with a rich set of peripherals and a robust instruction set, making it suitable for a wide range of applications from industrial automation to consumer electronics.

Specifications and Features

ATMEGA128-16AI Specifications

Core: 8-bit AVR

Flash Memory: 128 KB

SRAM: 4 KB

EEPROM: 4 KB

Clock Speed: Up to 16 MHz

Operating Voltage: 4.5V to 5.5V

Package: 64-pin TQFP

Operating Temperature Range: -40°C to 85°C

ATMEGA128-16AI Features

High-Performance AVR RISC Architecture: 133 Powerful Instructions

Peripheral Features: 53 Programmable I/O Lines, 8-channel 10-bit ADC, 4 PWM Channels

Timers: 4 Timer/Counters

Communication Interfaces: USART, SPI, TWI (I2C)

Power Management: Multiple Sleep Modes, Power-on Reset, Brown-out Detection

Development Support: JTAG Interface for On-Chip Debugging

ATMEGA128-16AI Pinout

Pin NameDescriptionFunctionVCCPower SupplyPowers the microcontrollerGNDGroundGround reference for the microcontrollerPORTAPA[0:7]Port A: Analog Inputs/General Purpose I/OPORTBPB[0:7]Port B: General Purpose I/OPORTCPC[0:7]Port C: General Purpose I/OPORTDPD[0:7]Port D: General Purpose I/OPORTEPE[0:7]Port E: General Purpose I/OPORTFPF[0:7]Port F: General Purpose I/OPORTGPG[0:4]Port G: General Purpose I/ORESETResetResets the microcontrollerXTAL1Crystal OscillatorExternal clock inputXTAL2Crystal OscillatorExternal clock outputAVCCAnalog SupplyPowers the ADCAREFAnalog ReferenceReference voltage for the ADCADC[0:7]Analog InputsInputs for the Analog-to-Digital ConverterJTAGJTAG InterfaceFor debugging and programmingTWISCL, SDAI2C Communication LinesUSARTTXD, RXDUART Communication LinesSPIMISO, MOSI, SCK, SSSPI Communication Lines

ATMEGA128-16AI Applications

Embedded Systems

The ATMEGA128-16AI is widely used in embedded systems for applications such as robotics, automation, and control systems, thanks to its rich set of peripherals and robust performance.

Industrial Automation

In industrial automation, the ATMEGA128-16AI provides the processing power and flexibility needed for controlling machinery, monitoring processes, and interfacing with sensors and actuators.

Consumer Electronics

This microcontroller is also found in consumer electronics, where it helps manage functions in devices like remote controls, home automation systems, and portable gadgets.

Automotive Systems

In automotive applications, the ATMEGA128-16AI can be used for engine control units (ECUs), infotainment systems, and other in-vehicle electronics requiring reliable and efficient operation.

Communication Systems

The ATMEGA128-16AI supports multiple communication protocols, making it suitable for use in networking and communication systems where reliable data transfer is crucial.

ATMEGA128-16AI Package

The ATMEGA128-16AI is available in a 64-pin TQFP package, which supports surface-mount technology (SMT). This package facilitates high-density PCB designs and efficient use of board space.

ATMEGA128-16AI Manufacturer

The ATMEGA128-16AI is manufactured by Microchip Technology, a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. Microchip offers extensive support and documentation for the ATMEGA128-16AI, ensuring ease of use and integration into electronic designs.

ATMEGA128-16AI Datasheet

Download ATMEGA128-16AI datasheet.

Conclusion

The ATMEGA128-16AI is a versatile and efficient microcontroller, suitable for a wide range of applications, from embedded systems to industrial automation and consumer electronics. Its combination of high performance, rich peripheral set, and robust development support makes it a valuable component in electronic designs. Microchip's commitment to quality ensures the ATMEGA128-16AI provides consistent and dependable results in various environments.

[digitalblocksinc09]

The AXI Direct Memory Access (AXI DMA) IP gives high-data transmission coordinate memory access between memory and AXI4-Stream-type target peripherals. We offer 1-16 Channels with identical features to the AXI version, with full AHB support but without the extra capacities of the AXI Interconnects offers. To get more details please visit us at https://www.digitalblocks.com/ or  call us at 201-251-1281

[digiblogs1-blog]

What is a SPI Controller IP core?

The Serial Peripheral Interface (SPI) permits fast synchronous serial information exchange between microprocessors / microcontrollers and peripheral devices. The SPI-MS center can work either as a Master or a Slave SPI bus device. Digital Blocks offers full highlighted SPI Controller IP Verilog Cores, with discharges containing Master/Slave, Master-and Slave-just capacities, and QSPI Flash Memory Controller Verilog IP Cores. QSPI Flash Memory Controllers get to QSPI Flash by CPU with choice for Execute-In-Place (XIP) and boot.

Highlights of SPI Controller IP core:

• Support for both SPI Master and Slave.

• Multi Master Support.

• In Master Mode – bit rate created is System Clock/2.

• In Slave Mode – bit rate upheld is ≤ System Clock/8.

• Programmable SCK Phase and Polarity.

• Supports Repeated Start and Fast Read Operation.

• Transaction Layer actualized in HDL Source code too.

• Programmable interior information way width from 1 byte to 64 bytes.

• Technology free HDL Source code.

• Supports all FPGA gadgets.

• Well demonstrated IP against numerous SPI gadgets.

SPI Controller Reference Designs and Evaluations:

For FPGA configuration groups, we offer AMBA Interfaces to CPUs in all Master/Slave, Master- only and Slave-only discharges. For Altera® FPGAs, we furthermore offer the Avalon Interface to the Nios® II inserted processor. All SPI Controller IP Cores are accessible in Verilog RTL or, for bring down costs, Altera® or Xilinx® net list groups.

For ASIC, ASSP, Custom IC configuration groups, we offer AMBA Interfaces to CPUs in all Master/Slave, Master-only, and Slave-only discharges. All SPI Controller IP Cores are accessible in Verilog RTL. For organizations first seeking after FPGA emulation, Digital Blocks services will completely help. To take in more about the SPI Controller IP Core please contact Digital Blocks @ https://www.digitalblocks.com/spi-ip-core-reference-design.html

[t2mip]

Peripheral IP Cores Targeting Automotive Applications for Reliable Performance

T2MIP, the global independent semiconductor IP Cores provider & Technology experts, a leading provider of electronic design services and IP solutions, is proud to offer a comprehensive range of Peripheral IP cores, including CAN, LIN, UART, SPI, and I2C. These IP Cores have been in Production in multiple chipsets with a robust and high-speed interface.

Peripherals IP cores such as CAN Bus, LIN Bus, UART, SPI and I2C IPs for automotive are designed to increase and expand a computer's functionality without changing the system's essential parts. These IP cores are essential building blocks for any embedded system, enabling communication between various devices and facilitating data transfer between different subsystems. With our cutting-edge IP cores, designers can achieve higher performance, greater flexibility, and improved reliability in their designs.

CAN (Controller Area Network) is a widely used communication protocol that enables the exchange of data between multiple devices in real-time. Our CAN IP cores is designed to be highly configurable and scalable, making it a versatile solution for a wide range of applications. We have CAN FD, CAN 2.0 and CAN XL available for automation.

The LIN bus is a polled bus with one master device and one or more slave devices. Both a master task and a slave task are present on the master device. With one slave job on each slave device. The master task in the master device controls all aspects of communication across the LIN bus. Our LIN IP cores provides robust and reliable communication between devices, with support for a variety of LIN versions and modes.

In UART communication, the transmitting UART transforms parallel data into the serial form, sends it serially to the receiving UART, and the latter transforms the serial data back into parallel data. Our UART IP cores offers high-speed, reliable communication with low power consumption, making it an ideal solution for many applications.

SPI is primarily utilized by a device to communicate between various circuit components. between a controller and peripheral ICs. Our SPI IP cores offers support for multiple devices and configurations, making it a highly flexible solution for a wide range of applications. We have the other versions of SPI eSPI, QSPI and FSPI for the automation.

I2C (Inter-Integrated Circuit) is a two-wire communication protocol commonly used in low-speed applications. Our I2C IP cores offers support for multiple devices and configurations, making it a highly versatile and cost-effective solution for many applications.

In addition to Peripheral IP Cores, T2M‘s broad silicon Interface IP Cores Portfolio includes many Wired Interface IP Cores available in major Fabs in process geometries as small as 7nm. They can also be ported to other foundries and leading-edge process nodes on request.

Availability: These Semiconductor Peripheral Interface IP Cores are available for instant licensing stand-alone and multiple IPs can be provided as a bundle package. For more information on licensing options and pricing please drop a request / MailTo

About T2M: T2MIP is the global independent semiconductor technology expert, supplying complex semiconductor IP Cores, Software, KGD and disruptive technologies enabling accelerated development of your Storage, Automotive, Modem Interface, Low Power Applications, Industrial and Communication Systems.

For more information, please visit: www.t-2-m.com

[tech2cool]

Netgear GS716TPP 16-Port PoE Plus Gigabit Smart Switch (two SFP Ports)

Vendor: Netgear Type: Hubs and Switches Price: 708.41

Review Highlights

Fully integrated cloud-manageable devices

Supports Energy Efficient Ethernet (IEEE 802.3az). Saves power

Desktop and rackmount placements

CPU

700 MHz single core

128 MB RAM

32 MB SPI Flash

Power over Ethernet

16 X 802.3at PoE+ Gigabit Ethernet (10/100/1000 Base-T) RJ-45 copper ports

Max PoE power output 300W. Dynamic PoE budget allocation

Deploy routers, VoIP conference phones, PTZ HD IP security cameras, wireless access points, proximity sensors, LED lighting, door locks, IoT devices etc

PoE on/off

PoE power priority setting

PoE power usage metering

PoE scheduling

IPv6 Management

IPv6 QoS

IPv6 ACL

IPv6 multicast

Static and dynamic IPv6 address assignment

Advanced Quality of Service (QoS) To Prioritise Traffic

Port based

802.1p based

L2/L3/L4 DSCP based

Low System Acoustic Noise

Two fixed internal fans

Temperature- and load-based fan speed control

Max 28.2 dB. At full power. And 25 deg C ambient

Features

Two dedicated Gigabit (1000 Base-X) SFP fiber uplink ports

Auto denial-of-service (DoS) prevention

IGMP Snooping and Querier. For multicast optimization

Egress rate limiting and priority queuing. For better bandwidth allocation

Port mirroring. For network monitoring

Cable test. To troubleshoot connection issues

Web browser-based management GUIo

Front LEDs

Per device: Power (with Cloud Mode Indicator), Fan, PoE Max and LED Mode

Per port: Speed/Link/Activity/PoE status

Internal power supply

Warranty

Switch: Lifetime Singapore return-to-base (customer carry-in) limited hardware warranty

Power Adapter: Two-year Singapore return-to-base (customer carry-in) limited hardware warranty

from Tech2Cool https://ift.tt/3ck3NUD

[stockstory]

2025년까지 성장세 지속 전망! 시스템 반도체 관련주는?

오늘의 무료 급등주 관련주 확인

http://m.site.naver.com/0J8eV

테마개요

시스템반도체란 다양한 기능을 집약한 시스템을 하나의 칩으로 만든 반도체로 메모리반도체와 달리 논리적인 정보처리 기능을 담당하고 있으며, 비메모리의 대부분을 차지함에 따라 통상 비메모리반도체라고 불림. 스마트폰, 태블리PC, 스마트 TV, 자동차 등 IT 융/복합 기기에 사용되며, 첨단 IT제품에 대한 수요가 급증하면서 활용범위가 크게 확대 됨. 이에 따라 수혜가 예상되는 종목군임. 

  12월 테마 주요 이슈 ❗❗

(12-30일)

11월 반도체 생산 호조 및 글로벌 파운드리 사장 성장 전망 등에 강세 (SFA반도체, 삼성전자, 네패스, SK하이닉스)

(12-28일)  

2025년까지 성장세 지속 전망 등에 상승 (DB하이텍, 네패스아크, 엘비세미콘, 고영)

(12-15일)  

ICT 수출 6개월 연속 증가 소식 및 D램 업황 회복 전망 등에 상승 (아이에이, 한미반도체, 테스나)

(12-2일)

미국 마이크론 테크놀로지 실적 가이던스 상향 조정 및 반도체 업황 개선 전망 등에 상승 (SFA반도체, 삼성전자, SK하이닉스)

  관련종목

- SFA반도체     (036540)

 반도체 조립 및 TEST 제품을 주력으로 생산하는 반도체 후공정 전문업체. 과거 Low level 비메모리 반도체 생산에서 점차 경박단소, 적층, 고용량의 High-end 제품생산 및 SiP(System-in-Package), SSD용 부품 등 차세대 제품을 생산중.   

  - 네패스     (033640)

 후공정 및 IT부품소재 전문업체. 비메모리 후공정(WLP) 및 Fan-out WLP(FOWLP) 기술을 보유중.   

  - 한미반도체     (042700)

 반도체, 태양광 및 LED 제조장비의 제조, 판매 업체. 반도체 제조용 장비를 국내외 반도체 관련 제조업체에 공급중. 반도체 후공정 장비업체로 시스템 반도체 투자 확대에 따른 수혜.   

  - 시그네틱스  (033170) 

  영풍그룹의 계열의 반도체 패키징(테스트포함) 전문 업체. 독자개발 및 특허를 취득한 STBGA (signetics tape ball grid array) 양산체제를 구축. 또한, CSP 계열인 FBGA 제품과 eMCP제품 등을 수주하고, 첨단 신규 PKG 제품인 FLIPCHIP LINE을 증설하여 가동중. 신규 패키지 기술인 flip chip 패키징을 개발함으로서, 향후 매출증가의 기반을 마련. 주요 거래처는 삼성전자, SK하이닉스 등.   

  - 아이에이     (038880)

 비메모리 반도체 설계 전문기업. 자동차 전장 분야를 중심으로 사업을 전개중이며, 현대/기아차와 자동차용 반도체를 국산화하는 계약을 체결하여 차량 인포테인먼트 분야에 적용할 수 있는 맞춤형 반도체를 국산화하는 등 다양한 반도체를 개발. 이 외에도 멀티미디어 통신 및 ASIC(주문형반도체설계) 분야와 관련된 사업을 영위중.   

  - 디아이     (003160)

  반도체 검사장비 등 초정밀 시험장비의 제조 및 수입업을 영위하는 업체. 삼성전자 향 시스템(비메모리) 반도체 검사장비 공급.   

  - 실리콘웍스     (108320)

 평판 디스플레이용 시스템 반도체 부품 제조업체. 생산설비가 없는 팹리스(Fabless)업체로 전량 반도체 전문생산업체(Foundry)에서 외주생산. 주요제품으로 다양한 방식의 디스플레이 구동에 필요한 핵심부품인 패널 구동 IC 와 Data 신호전달 및 제어부품(T-CON), 전원관리IC(PMIC) 등.   

  - 아이앤씨     (052860)

 팹리스(Fabless) 반도체 업체. 스마트에너지사업(한전 AMI, 민수 AMI, LED조명제어), 무선사업(IoT, Wi-Fi 칩&모듈), 멀티미디어사업(Mobile TV, Digital Radio) 등을 주요 사업으로 영위.   

  - 삼성전자     (005930)

 DS 사업부문(DRAM, NAND Flash, 모바일AP, TFT-LCD, OLED 등)에서 반도체 사업을 영위. 미국 오스틴의 시스템반도체(LSI) 전용라인을 보유. 신규 시스템반도체 라인인 화성 17라인을 보유.   

  - DB하이텍  (000990) 

 DB그룹 계열의 시스템 반도체 전문업체. 주요 사업으로 웨이퍼 수탁 생산 및 판매를 담당하는 Foundry 사업과 디스플레이 구동 및 Sensor IC 등 자사 제품을 설계, 판매하는 Brand 사업을 운영.   

  - 텔레칩스     (054450)

  디지털미디어 프로세서 등 멀티미디어와 통신관련 시장의 다양한 어플리케이션 제품에 필요한 핵심 칩 및 토탈솔루션을 개발/판매하는 비메모리 반도체 전문업체. 주요 제품으로 DMP(스마트 기기에 적용 되는 Application Processor 및 오디오/카메라/비디오 등 멀티미디어 기능을 지원하는 Digital Media Processor), Mobile TV 수신칩 등.   

  - 리노공업     (058470)

  검사용 PROBE(SPRING CONTACT PROBE:LEENO PIN)와 반도체 검사용 소켓(IC TEST SOCKET)을 자체브랜드로 개발하여, 제조 판매하는 사업을 영위하는 업체. 다품종 소량의 비메모리 반도체 칩에 대응할 수 있는 IC TEST SOCKET의 수요가 증가중.   

  - 티엘아이  (062860) 

 LCD 패널의 핵심부품인 Timing Controller와 LCD Driver IC등 시스템반도체 설계 전문 업체.   

  - SK하이닉스     (000660)

 SK그룹 계열의 세계적인 메모리 반도체 전문 제조업체. 주력 생산제품은 DRAM과 낸드플래시 및 MCP(Multi-chip Package)와 같은 메모리 반도체 제품이나, 2007년부터는 시스템 LSI 분야인 CIS(CMOS Image Sensor) 사업에 재진출하여 종합반도체 회사로 영역을 확대중.   

  - 하나마이크론     (067310)

  삼성전자 반도체 부문에서 분사한 반도체(메모리/비메모리) 패키징 전문 업체. 반도체 산업의 후공정 분야인 반도체 조립 및 TEST 제품을 주력으로 생산하고 있으며, 삼성전자, SK하이닉스 등이 주요 거래처임.   

  - 앤씨앤     (092600)

 영상보안장비에 특화된 멀티미디어 팹리스(Fabless) 반도체 설계업체. CCTV카메라와 DVR과 같은 영상보안기기의 영상처리 반도체를 주로 생산.   

  - 고영     (098460)

 전자제품 및 반도체 생산용 검사장비업체(3차원 정밀측정 검사 기술 보유). 주요 제품으로 3D SPI 장비와 3D AOI 장비 등을 보유.   

  - 에스앤에스텍     (101490)

 블랭크 마스크 제조업체. 블랭크마스크는 반도체 및 LCD, OLED 노광 공정의 핵심재료인 포토마스크의 원재료임. 시스템반도체 육성에 따른 블랭크마스크 매출 증가 기대.   

  - 어보브반도체     (102120)

 비메모리 반도체 중 주로 가전/전기 제품의 두뇌역할을 하는 반도체 칩(Microcontroller Unit) 생산/설계 팹리스 업체. 삼성 및 LG, 위니아대우 등 국내 가전사를 비롯하여 중국의 Midea, Xiaomi 등에 제품을 공급중.   

  - 알파홀딩스     (117670)

  시스템반도체 개발 전문기업. 다양한 분야(모바일, 자동차, CCTV 등)에서 시스템반도체 제품을 설계하는 팹리스 회사에 IP 및 개발에 필요한 모든 솔루션을 제공중. 삼성전자와 디자인서비스 Partner 계약을 체결하여 팹리스 회사에 완성된 시스템반도체 제품을 공급중. 제품 생산은 삼성전자에 위탁생산을 진행.   

  - 아이텍     (119830)

  시스템 반도체 테스트 전문업체. 패키지테스트(조립이 완료된 반도체에 대한 최종 양품/불량 판정 테스트)와 웨이퍼테스트(Fab에서 나온 Wafer를 조립진행 전 양품/불량 판정 테스트)를 주요사업으로 영위.   

  - 아나패스     (123860)

  비메모리 반도체의 일종인 시스템 반도체 특히, 주문형 반도체(ASIC)를 주력으로 개발, 공급하는 팹리스 업체. 주력제품으로 타이밍콘트롤러(T-con)를 개발/생산하고 있으며, 주 매출처로는 삼성디스플레이, SEC 등.   

  - 에이티세미콘     (089530)

  반도체(메모리 및 시스템 반도체) 패키징 사업 및 테스트사업을 영위하는 반도체 후공정업체. 주거래처는 삼성전자와 SK하이닉스 등 대형 IDM 업체와 일본의 후지쯔, 샤프 등 해외 팹리스 업체.   

  - 오디텍     (080520)

 비메모리반도체 Chip과 센서 및 센서모듈 등을 생산.   

  - 테스나     (131970)

  시스템반도체 테스트 전문업체. Logic 및 Mixed Signal IC를 포함한 SoC, CMOS 이미지센서(CIS), Micro Controller/Smart Card IC 및 Analog 반도체 테스트를 주요 사업 영역으로 영위.   

  - 아진엑스텍     (059120)

  모션제어 칩을 핵심경쟁력으로 하는 Fab-less 반도체 설계 전문업체. 모션제어 칩(Chip)을 이용해 다양한 모션제어 모듈, 모션제어 시스템, 로봇제어기 제품을 자체 기술로 개발/제조/판매/서비스중. 반도체 장비 및 스마트폰 장비와 같은 제조/검사 자동화 장비의 제어기 국산화 및 제조용 로봇제어기 전문기업.   

  - 에이디테크놀로지  (200710) 

  반도체소자 설계 및 제조(ASIC) 업체. 고사양/고집적도 시스템 반도체를 개발 및 양산중이며, 저전력 시스템반도체 개발을 위한 인프라를 확보하고 있음. 세계 최고 파운드리 기업인 TSMC와 VCA(Value Chain Aggregator) 계약을 20년3월 해지. 다만, TSMC와 비즈니스 협력관계는 계속 유지되며, 기존 개발 과제 및 양산도 진행. 20년10월 삼성전자 파운드리 에코시스템 파트너인 SAFETM DSP(Design Solution Partner)로 선정.   

  - 엘비세미콘     (061970)

  평판 디스플레이용 Driver IC(DDI) 및 CMOS Image Sensor(CIS) 등 비메모리반도체의 범핑(Bumping) 및 패키징(Packaging) 사업을 영위.   

  - 다믈멀티미디어     (093640)

  소비자(Consumer)용 멀티미디어 반도체를 개발, 판매하는 기능형 반도체 설계전문회사. SoC(System On a Chip) 설계기술을 바탕으로 Optical IC 및 Multimedia Interface IC 등의 제품을 개발 및 판매. AP(어플리케이션 프로세서) IC와 DAB IC 등의 제품도 개발.   

  - 에이디칩스     (054630)

  반도체 설계 및 비메모리 반도체 판매 업체로 EISC MCU Core IP 라이센싱 사업과 ASSP 개발/판매 및 이를 이용한 보드/시스템 개발/판매 사업 영위. 엠코어(emCORE) 소프트 설계자산이 삼성전자 시스템LSI 파운드리사업부의 파운드리 서비스 목록에 등재.   

  - 테크윙     (089030)

  반도체 테스트핸들러 장비 전문 기업. 메모리 테스트핸들러 장비 기술 경쟁력 기반, 비메모리 테스트핸들러 장비 시장으로 사업 확대.   

  - 피에스케이     (319660)

  기존 피에스케이에서 반도체 전공정 장비 사업부문이 인적분할됨에 따라 재상장된 업체. 주요 제품으로 Dry Strip, Dry Cleaning, New Hard Mask Strip, Etch Back 등이 있으며, Dry Strip 장비분야 세계시장에서 시장점유율을 확고히 하는중. 메모리반도체 시장 內 점유율 확대시키며 시장 성장에 따른 수혜 기대감 부각.   

  - 지니틱스     (303030)

  시스템 반도체 팹리스 설계 회사로, 시스템 반도체의 가장 기본이 되며 핵심인 터치 컨트롤러 IC(Touch Controller IC), Auto Focus & OIS Driver IC (‘AF Driver IC’), Haptic IC, Fintech MST IC, AMOLED DC-DC IC 등을 개발.   

  - 라닉스 (317120) 

  자동차와 사물인터넷(IoT)의 핵심기술인 무선통신과 보안 및 인증 관련 시스템반도체 및 LPWAN(Low-Power Wide-Area Network) 플랫폼 사업 등을 영위하는 토털 시스템반도체 솔루션 업체.   

  - 코아시아     (045970)

  시스템반도체 파운드리 디자인솔루션 전문업체인 코아시아 세미를 자회사로 보유한 사업지주회사. 코아시아 세미를 통해 20년 4월 삼성전자 파운드리 사업부의 SAFE DSP(디자인 솔루션 파트너)로 등록.   

  - 네패스아크     (330860)

  시스템반도체 생태계의 중요한 한 축을 담당하는 반도체 테스트 전문기업. PMIC(Power Management IC), DDI(Display Driver IC), SoC(System on Chip) 등 영역의 반도체 테스트를 주력으로 영위하고 있으며, 특히 PMIC에 대해서는 국내 독점적 지위 확보. 네패스를 모회사를 두고 네패스 고객사(삼성전자 등)의 Test 물량을 확보해 웨이퍼 테스트(Wafer Test), Package Test, Final Test(FT)를 진행.

Copyright by www.infostock.co.kr. All rights Reserved 본 정보는 해당종목의 매수/매도신호가 아니며, 이를 근거로 행해진 거래에 대해 책임을 지지 않습니다.

여의도정보통 RS프리미엄에서는 자세한 관련주 상황, 코로나 백신 속보, 종목 매수매도 리딩을 실시간으로 드리고 있습니다. 

매일 장 전 무료 급등주 받아보시고 좋은 정보 얻어가세요~

http://m.site.naver.com/0IOvT

  2020/12/24 - [관련주 모음 ] - 얀센 백신 600만명분 계약! 얀센 관련주는?

  얀센 백신 600만명분 계약! 얀센 관련주는?

오늘의 무료 급등주 관련주 확인 http://m.site.naver.com/0J8eV 정부가 글로벌 제약사 얀센(존슨앤존슨)과 화이자로부터 신종 코로나19 백신 1600만명분을 추가로 확보했다는 소식입니다. 정세

yeo2do.tistory.com

2020/12/23 - [관련주 모음 ] - 애플카 수혜로 LG전자 주가 폭등! 관련주는?

  애플카 수혜로 LG전자 주가 폭등! 관련주는?

오늘의 무료 급등주 관련주 확인 http://m.site.naver.com/0J8eV LG전자가 세계적인 자동차 부품 업체인 캐나다 마그나인터내셔널과 10억달러 (약1조1094억원) 을 투입해 전기차 부품을 생산할 합작

yeo2do.tistory.com

2020/12/22 - [관련주 모음 ] - 애플 2024년 까지 자율주행 승용차 생산 목표! 관련주는?

  애플 2024년 까지 자율주행 승용차 생산 목표! 관련주는?

오늘의 무료 급등주 관련주 확인 http://m.site.naver.com/0J8eV 세계 시총 1위기업 애플이 자율주행차 시장에 뛰어든다고 로이터 통신을 통해 보도 됐습니다. 애플은 2024년까지 자율주행 승용차를

yeo2do.tistory.com

2020/12/21 - [관련주 모음 ] - 서울시장 출마선언! 안철수 관련주는?

  서울시장 출마선언! 안철수 관련주는?

오늘의 무료 급등주 관련주 확인 http://m.site.naver.com/0J8eV 국민의당 안철수 대표가 내년 4월 서울시장 보궐선거에 출마 하겠다고 공식 선언! ' 지금은 대선을 고민할 때가 아니라 서울시

yeo2do.tistory.com

2020/12/17 - [관련주 모음 ] - 2차전지 연일 상승세, 2차전지 소재 관련주는?

  2차전지 연일 상승세, 2차전지 소재 관련주는?

오늘의 무료 급등주 관련주 확인 http://m.site.naver.com/0J8eV 안녕하세요 여의도정보통 입니다. 12월 16일자 양극재 업체 엘앤에프의 1조원이 넘는 계약 규모와 최종 고객사가 테슬라라는 기

yeo2do.tistory.com

2020/12/16 - [관련주 모음 ] - 2021년 신규상장 예정, 대어급 종목 정리

  2021년 신규상장 예정, 대어급 종목 정리

오늘의 무료 급등주  관련주 확인 http://m.site.naver.com/0J8eV 안녕하세요 여의도정보통입니다. 하반기 국내 증시에 새로 입성한 종목들이 수익률 60%대를 기록하는 등 고공행���을 이어가고 있

yeo2do.tistory.com

2020/12/15 - [관련주 모음 ] - 비대면 진료 시행! 원격의료 관련주는?

  비대면 진료 시행! 원격의료 관련주는?

오늘의 무료 급등주 관련주 확인 http://m.site.naver.com/0J8eV 안녕하세요 여의도정보통 입니다. 감염병관리법 오늘 공포!! 비대면 진료 즉시 시행 코로나19 3차 확산세가 지속되고 있는 가운

yeo2do.tistory.com

  이 자료는 투자자의 증권투자를 돕기 위해 당사 고객에 한하여 배포되는 자료로서 저작권이 당사에 있으며 불법 복제 및 배포를 금합니다. 그 정확성이나 완전성을 보장할 수 없으므로 투자자 자신의 판단과 책임하에 최종결정을 하시기 바랍니다.  따라서 어떠한 경우에도 본 자료는 고객의 주식투자의 결과에 대한 법적 책임 소재의 증빙자료로 사용될 수 없습니다.

        from 여의도정보통 https://ift.tt/3n6hx85

[howzitsa]

TP-Link Archer AX20 AX1800 Dual Band Wifi 6 Router FEATURES: Dual-Band Wi-Fi 6: Equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity, and reduced network congestion Next-Gen 1.8Gbps Speeds: Enjoy smooth streaming, downloading, and gaming all without buffering with Wi-Fi speeds of 1.8Gbps Connect More Devices: Wi-Fi 6 technology communicates more data to more devices using revolutionary OFDMA technology while simultaneously reducing lag Quad-Core Processing: The 1.5GHz quad-core CPU ensures communications between your router and all connected devices are smooth Extensive Coverage: Beamforming, independent FEM, and four antennas combine to deliver focused reception to devices far away Increased Battery Life: Target Wake Time technology reduces your devices’ power consumption to extend their battery life USB Easy Sharing: A USB 2.0 Port enables easy file sharing within your network or building private Cloud Storage Easy Setup: Set up your router in minutes with the powerful TP-Link Tether App Backward Compatible: Supports all previous 802.11 standards and all Wi-Fi devices WIRELESS Standards Wi-Fi 6 IEEE 802.11ax/ac/n/a 5 GHz IEEE 802.11ax/n/b/g 2.4 GHz WiFi Speeds AX1800 5 GHz: 1201 Mbps (802.11ax) 2.4 GHz: 574 Mbps (802.11ax) WiFi Range 3 Bedroom Houses 4× Fixed High-Performance Antennas Multiple antennas form a signal-boosting array to cover more directions and large areas Beamforming Concentrates wireless signal strength towards clients to expand WiFi range High-Power FEM Improves transmission power to strengthen signal coverage WiFi Capacity High Dual-Band Allocate devices to different bands for optimal performance OFDMA Simultaneously communicates with multiple Wi-Fi 6 clients Airtime Fairness Improves network efficiency by limiting excessive occupation 4 Streams Connect your devices to more bandwidth Working Modes Router Mode Access Point Mode HARDWARE Processor 1.5 GHz Quad-Core CPU Ethernet Ports 1× Gigabit WAN Port 4× Gigabit LAN Ports USB Support 1× USB 2.0 Port Supported Partition Formats: NTFS, exFAT, HFS+, FAT32 Supported Functions: Apple Time Machine FTP Server Media Server Samba Server Buttons WPS/Wi-Fi Button Power On/Off Button LED On/Off Button Reset Button Power 12 V ⎓ 1.5 A SECURITY WiFi Encryption WPA WPA2 WPA3 WPA/WPA2-Enterprise (802.1x) Network Security SPI Firewall Access Control IP & MAC Binding Application Layer Gateway Guest Network 1× 5 GHz Guest Network 1× 2.4 GHz Guest Network VPN Server OpenVPN PPTP SOFTWARE Protocols IPv4 IPv6 Parental Controls URL Filtering Time Controls WAN Types Dynamic IP Static IP PPPoE PPTP L2TP Quality of Service QoS by Device Cloud Service Auto Firmware Upgrade OTA Firmware Upgrade TP-Link ID DDNS NAT Forwarding Port Forwarding Port Triggering DMZ UPnP IPTV IGMP Proxy IGMP Snooping Bridge Tag VLAN DHCP Address Reservation DHCP Client List Server DDNS TP-Link NO-IP DynDNS Management Tether App Webpage PHYSICAL Dimensions (W×D×H) 10.2 × 5.3 ×1.5 in (260.2 × 135.0 × 38.6 mm) Package Contents Wi-Fi Router Archer AX20 Power Adapter RJ45 Ethernet Cable Quick Installation Guide OTHER System Requirements Internet Explorer 11+, Firefox 12.0+, Chrome 20.0+, Safari 4.0+, or other JavaScript-enabled browser Cable or DSL Modem (if needed) Subscription with an internet service provider (for internet access) Certifications FCC, CE, RoHS Environment Operating Temperature: 0℃~40℃ (32℉ ~104℉) Storage Temperature: -40℃~70℃ (-40℉ ~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing TEST DATA WiFi Transmission Power CE:

[perfectirishgifts]

Lattice Semiconductor Launches New FPGA For Cyber-Resilient Systems

New Post has been published on https://perfectirishgifts.com/lattice-semiconductor-launches-new-fpga-for-cyber-resilient-systems/

Lattice Semiconductor Launches New FPGA For Cyber-Resilient Systems

Earlier this week, Lattice Semiconductor announced its newest product built on the Lattice Nexus FPGA platform, the Mach-NX. The Mach-NX FPGA product family addresses the growing threat of firmware hacking attempts on systems, leading to the loss of customer IP. Moor Insights & Strategy have written a lot about this growing threat, funded by nation-states with “as a service” business models.

As bad actors continue to attack firmware, companies like Lattice Semiconductor need to constantly be upping its games to enable their customers to create cyber-resilient systems. Enter a new FPGA from Lattice. The Mach-NX is a high performance, low power FPGA product family aimed at dynamic, real-time, and end-to-end platform protection. This launch is the next logical step for Lattice on its low power FPGA journey and marks the third Nexus launch in a year. The company is uniquely positioning itself as a leader, if not the leader in low power FPGA security solutions, and this launch helps reinforce that. 

Lattice has been delivering new security-focused FPGAs at a faster cadence than we are used to. Since FPGAs are incredibly flexible, it also gives Lattice the ability to expand its presence into different markets that need programmable security solutions. In recent memory, Lattice launched CrossLink-NX in late 2019, Certus-NX this past summer, and now Mach-NX. You can read my full write up on the Certus-NX launch here. Lattice was ambitious when it promised to speed up its launch cadence by 3x, and it has done just that in 2020. The company seems hyper focused on low power FPGA dominance as 2020 comes to an end, and its future seems bright. 

Lattice Semiconductor Mach NX

As hackers continue to attack firmware vulnerabilities with nation-state budgets and “as a service” models, companies need a flexible, secure solution that can adapt and serve different industries and applications. That problem is the exact reason that Lattice developed its new security-focused FPGA, Mach-NX. The new Mach-NX FPGA family will build on the previous product, the Lattice MachXO3D family. The new Mach-NX product family will address future server platforms, computing, communications, industrial, and automotive systems. Like other Lattice Nexus products, the new Mach-NX FPGA will utilize the same 28 nm FD-SOI fab process. While not a bleeding edge geometry, the specialized FD-SOI process technology allows Lattice to deliver extremely energy-efficient solutions without sacrificing performance. I also believe this solution is much smaller than competing solutions. High performance while maintaining low power matters a lot when you consider that traditionally high-density FPGAs trade power for size. I’ve talked enough about application and product introduction; let’s get into the nuts and bolts of the Mach-NX.

I listed the new features verbatim for the Mach-NX FPGA products from Lattice’s announcement. 

Up to 8.4K LC of user logic, 2669kbits of user flash memory, and dual boot flash feature. 

Up to 379 programmable I/O supporting 1.2/1.5/1.8/2.5/3.3 I/O voltages.

Secure enclave supports 384-bit cryptography, including SHA, HMAC, and ECC.

Lattice Semiconductor Mach-NX

The first goal of a security solution is establishing a Hardware Root of Trust upon boot, which the Mach-NX does. The Mach-NX FPGAs also give users real-time performance against security risks with real-time SPI monitoring. According to Lattice, the Mach-NX FPGAs can again recover firmware within microseconds, where other FPGAs can take 100s of milliseconds or even minutes to recover firmware.  

The 384-bit encryption is a significant security upgrade from the 256-bit encryption we saw with the last generation products. This security level becomes essential, especially when considering the longevity of end products that would adopt the Mach-NX, which could be up to 10 years.  As the number of attack vectors and cyber-attacks is increasing rapidly, security solutions need to adapt and become harder to hack. Another value that customers get from implementing Mach-NX FPGAs is customizing solutions specifically for their applications and use. Customers will be able to configure their FPGAs’ security using RISC-V and Lattice’s Propel Design Environment. I admire the way Lattice is positioning its Mach-NX solution as a first on, last-off, real-time, fully customizable solution for the customer’s unique needs. When you pair these solutions with Lattice’s security service, SupplyGuard, a customer’s system can be protected throughout the product life cycle’s duration. 

Lattice Semiconductor Mach-NX

Wrapping up 

All in all, Lattice’s new Mach-NX looks to deliver on its core value proposition and extends the capabilities of Lattice’s previous generation of secure control FPGAs. Attack vectors and hackers will continually evolve their attack methods, and as those change, I believe s Lattice’s solutions will volve to address those methods.

Since this time last year, Lattice has launched three FPGA product families built on its Lattice Nexus FPGA platform with no signs of slowing down. If you recall, since CEO Jim Anderson took the helm Lattice looks to have generated a tremendous amount of momentum with Lattice Nexus, as further reinforced by the launch of Mach-NX. Add to that the work the company has put in to round out its offerings with application-focused solutions stacks and software design tools, and it’s clear they are laser-focused on delivering on the promise of low power programmable leadership. 

Note: Moor Insights & Strategy writers and editors may have contributed to this article. 

Moor Insights & Strategy, like all research and analyst firms, provides or has provided paid research, analysis, advising, or consulting to many high-tech companies in the industry, including 8×8, Advanced Micro Devices, Amazon, Applied Micro, ARM, Aruba Networks, AT&T, AWS, A-10 Strategies, Bitfusion, Blaize, Box, Broadcom, Calix, Cisco Systems, Clear Software, Cloudera, Clumio, Cognitive Systems, CompuCom, Dell, Dell EMC, Dell Technologies, Diablo Technologies, Digital Optics, Dreamchain, Echelon, Ericsson, Extreme Networks, Flex, Foxconn, Frame (now VMware), Fujitsu, Gen Z Consortium, Glue Networks, GlobalFoundries, Google (Nest-Revolve), Google Cloud, HP Inc., Hewlett Packard Enterprise, Honeywell, Huawei Technologies, IBM, Ion VR, Inseego, Infosys, Intel, Interdigital, Jabil Circuit, Konica Minolta, Lattice Semiconductor, Lenovo, Linux Foundation, MapBox, Marvell, Mavenir, Marseille Inc, Mayfair Equity, Meraki (Cisco), Mesophere, Microsoft, Mojo Networks, National Instruments, NetApp, Nightwatch, NOKIA (Alcatel-Lucent), Nortek, Novumind, NVIDIA, Nuvia, ON Semiconductor, ONUG, OpenStack Foundation, Oracle, Poly, Panasas, Peraso, Pexip, Pixelworks, Plume Design, Poly, Portworx, Pure Storage, Qualcomm, Rackspace, Rambus, Rayvolt E-Bikes, Red Hat, Residio, Samsung Electronics, SAP, SAS, Scale Computing, Schneider Electric, Silver Peak, SONY, Springpath, Spirent, Splunk, Sprint, Stratus Technologies, Symantec, Synaptics, Syniverse, Synopsys, Tanium, TE Connectivity, TensTorrent, Tobii Technology, T-Mobile, Twitter, Unity Technologies, UiPath, Verizon Communications, Vidyo, VMware, Wave Computing, Wellsmith, Xilinx, Zebra, Zededa, and Zoho which may be cited in blogs and research.

From Cloud in Perfectirishgifts

[webrootsafe86]

USA Kaspersky download windows 10

USA Kaspersky download windows 10 offers you an extreme level of Internet Protection. This software deals with multi-layered security against Its advanced one license security suite helps you to get protection from webcam spies, financial scammers, and many more attackers. Below are the amazing features of this Kaspersky Product:

Email Alert

Internet Security

Desktop Notifications

Email Attachment Protection

Intrusion Detection System

Privacy Protection

Anti-Spam

Event Tracking

IP Protection

Web Security

Detect Viruses

Anti-Viruses

Internet Usage Monitoring

Web Threat Management

Safe Files

On the basis of Features, the main difference between Kaspersky Total Security and Internet Security is that Total Security provides extra features such as file backup encryption and secure password management while the Internet Security offers the Core protection features.  

General requirements:

480 MB of free disk space.

CD/DVD drive (for installation from CD).

Internet connection (for product activation and database update).

Pointing device.

Microsoft Internet Explorer 8.0 or later (for updating anti-virus databases and application modules over the Internet).

Microsoft Windows Installer 3.0.

Microsoft .Net Framework 4.

Requirements for netbooks:

CPU Intel Atom 1.6 GHz and faster (or a compatible equivalent)

Video adapter Intel GMA950 with at least 64 MB of video RAM (or a compatible equivalent)

Screen resolution of at least 1024×576 pixels.

Kaspersky Total Security features

Aimed at users who need additional protection for their personal data, USA Kaspersky download windows 10 is a complete solution for professional and regular users alike. You can get a license for three, five, or ten devices. The price is slightly higher, but you get more than what the previous packages have to offer.

Backup software

There are countless ways to lose important data, from virus attacks to hard drive failure. To prepare for such situations, the included backup software can help you create spare copies of any files you deem important, so if they ever get corrupted or accidentally deleted, you will be able to get them back quickly and easily. Also, thanks to the scheduling options, you won't have to run backup jobs yourself, because the software will do it for you automatically.

File shredder

Deleted files can be restored with specialized applications and your important documents are no exception. However, if you erase the files with Kaspersky's shredding tool, you can make sure the information is gone forever and it will never fall in the wrong hands.

File encryption

You can lock and password-protect files that you don't want others to open. Your documents, project files, or any other data can be encrypted with the latest algorithms, making it impossible for anyone to read them, regardless of how hard they try.

Password manager

Kaspersky Total Security's password manager is an excellent solution if you keep forgetting your passwords. Even if you have long and complex passwords, you can write them down in an encrypted database and retrieve them when you need to sign in to your accounts. You only need to remember one password, to keep all your login credentials safe.

System optimizer

The software can remove temporary files, clear browser caches, and deal away with other unnecessary bits of data that are clogging up your hard drive and affecting your computer's speed. Clicking one or two buttons is all the effort you need to put in, to improve your system's performance by a noticeable margin.

Online storage

If you find Kaspersky's backup utility useful, you will also appreciate the fact that it provides you with free secure cloud storage. You can choose to store your backups in the cloud or use the space to store the data you want to access from work, while on the road or from any other location in the world.

Here are the steps to reach Kaspersky download setup wizard

First of all, open a browser in your computer and type there usa.kaspersky.com/download.

If you are using an Internet explorer browser ( Blue E ) then it will show you two or three options in the bottom “Run” “save” “cancel”. Now click on run if it is there otherwise click on save.

After, if you clicked on save you will get a “run” option also. And if you already get clicked on “run” then the program will start installing on the computer.

Seems like you got a green box on your screen, which is asking for a key code then you are going in the right direction.

Now put your key code in the box. The key code is 20 digit alphanumeric characters which are actually situated on the back of your card. If you have not peeled it yet, peel it gently and you will find the key code.

Seems like you got the key code now, so just put it, into the box which is appearing in your computer screen. And click on, agree, and install on the downside.

Now your computer will show you a prompt ” do you want to allow this program to make changes in your computer ” Click on “yes”.

Also, put your email when a box comes to your screen after clicking “yes” on the prompt.

Now your product is completely installed, and you can use it. And it will scan your computer for the first time automatically.

Frequently Asked Questions

Is Kaspersky a good antivirus?

If you want antivirus software that protects your computer against malware, Kaspersky is the best of the best. It may be slightly more expensive, but you won’t have any problems with viruses.

Is Kaspersky Safe 2019?

Kaspersky Lab’s Total Security 2019 is an excellent security suite with a great detection engine and numerous extra features for power users. It also works to protect your privacy by controlling which programs can access sensitive hardware like your webcam.

Is Kaspersky still safe to use?

Yes, It’s Still Safe to Use Kaspersky Antivirus Software.

[digitalblocksinc09]

The Digital Arena Will Be The Backbone Of Future Earth

MIPI I3C Basic contains the most commonly used I3C features for developers and other standards organizations. As an alternative to I2C, the smartphone ecosystem and the wider device integrator community can make effective use of these capabilities. Digital Blocks is a leading developer of silicone-proven Intellectual Property cores that design various generations of IP versions as needed.

MIPI I3C basic is a versatile, medium-speed utility and control bus interface that is used to connect peripherals to an application processor, thereby streamlining integration and increasing cost efficiencies. It provides developers with unparalleled opportunities to create revolutionary prototypes for any electronic product, from smartphones to wearable to automotive systems.

Some Basic Features of I3C Basic:

●        I2C backward compatibility.

●        A multi-drop bus that, at 12.5 MHz, is more than 12 times faster than I2C through using much less fuel.

●        In-band interrupts allow slaves to alert masters of interrupts, eliminating the need for a separate general-purpose input/output (GPIO) for each slave and thereby lowering system cost and complexity.

●        Dynamic address assignment eliminates the need for overlapping static addresses while still ensuring consistency and pin savings.

●        Standardized bus discovery, setup, and control.

●        Standard low-cost pads are used, and logic costs are kept to a minimum.

MIPI I3C combines core features of the standard I2C and SPI interfaces to provide a single, high-performance, very-low-power approach, as well as a stable, scalable upgrade roadmap to I3C for I2C and SPI implementers. I3C Basic v1.0 has introduced new technologies for integrating mechanical, sound, biometric, thermal, and other types of sensors. MIPI I3C v1.1 expands on that with new functionality for peripheral guidance, control, and connectivity to a host processor over a short distance, as well as device manageability.

MIPI I3C Basic is a serial communication interface specification that enhances I2C features, performance, and power consumption while preserving backward compatibility for the majority of devices. For more details, visit us at https://www.digitalblocks.com/

[digiblogs1-blog]

Buy DMA IP Core With AMBA Interconnects

Digital Blocks DMA Controller IP Cores offer a flexible CPU programming interface and high-performance transfer rates with leading AMBA Interconnects and standard or customized peripheral interfaces. Contact us on- http://www.digitalblocks.com, info@digitalblocks.com, 201-251-1281.

[t2mip]

SD, eMMC Host and Device Controller IP Cores Available for License

T2MIP, the global independent semiconductor IP Cores provider & Technology experts, is pleased to announce the immediate availability of its partner’s JEDEC standard SD/eMMC Host and Device Controllers with Matching PHY IP Cores which are silicon proven in major Fabs and Nodes and has been in Production in multiple chipsets with High storage capability making it a viable solution to integrate and implement in a varied range of applications.

SD/eMMC v5.1 Host & Device IP Cores are an embedded non-volatile memory system, comprised of both flash memory and a flash memory controller, which implements the Host and Device Controller IPs with high-speed processing power by complementing each core and makes the interface design with the Physical layer a lot less complex. This exempts Product developers from the hassle of integration, following to a diminished time-to-market. 

Our SD/eMMC Host & Device Controllers and PHY IP Cores are specially designed for the eMMC v5.1 to augment its storage with SD v5.1 features to address the increasing storage needs of mobile, consumer, IoT and automotive applications. The eMMC 5.1 is compliant with JEDEC Standard JESD84-B51 and the Secure Digital (SD) part supports SD5.1 and later specifications (Class 1, Video Speed Performance) allowing the selection of either SD or SPI mode. To store and transfer data securely, the SD/eMMC IP Cores provide both data write protection and password protection. The multiple bus-width feature allows Host and Device design flexibility and higher data transfer bandwidth.

The SD/eMMC Host & Device Controllers with matching PHY IP Cores supports High-Speed Dual Data Rate transfer (52MHz), Single date rate transfer (200MHz) for eMMC and Default Speed mode (25 MHz, up to 12.5 MB/sec), High Speed mode (50 MHz, up to 25 MB/sec) for SD. The SD/eMMC IP Cores boasts low cost, low power and comparably low area making it feasible for portable and space-constrained products.

SD/eMMC Host & Device Controllers and PHY IP cores have been used in semiconductor industry’s Cellular Electronics, IoT Sensors, Navigational systems, Consumer electronics, handheld computers, and other industrial uses…

In addition to SD/eMMC IP Cores, T2M ‘s broad silicon Interface IP Core Portfolio includes USB, HDMI, Display Port, MIPI (CSI, DSI, UniPro, UFS, Soundwire, I3C), PCIe, DDR, 10/100/1000 Ethernet, V-by-One, programmable SerDes, OnFi and many more, available in major Fabs in process geometries as small as 7nm. They can also be ported to other foundries and leading-edge processes nodes on request.

Availability: These Semiconductor Interface IP Cores are available for immediate licensing either stand alone or with pre-integrated Controllers and PHYs. For more information on licensing options and pricing please drop a request / MailTo

About T2M: T2MIP is the global independent semiconductor technology experts, supplying complex semiconductor IP Cores, Software, KGD and disruptive technologies enabling accelerated development of your Wearables, IOT, Communications, Storage, Servers, Networking, TV, STB and Satellite SoCs. For more information, please visit: www.t-2-m.com