#WSL command error fix | Explore Tumblr posts and blogs

veworkk · 3 years ago

Text

Configure forward and reverse lookup zones ubuntu 16.04

#CONFIGURE FORWARD AND REVERSE LOOKUP ZONES UBUNTU 16.04 UPDATE#

#CONFIGURE FORWARD AND REVERSE LOOKUP ZONES UBUNTU 16.04 WINDOWS 10#

The DNS servers can be pinged successfully in WSL terminal by ICMP. 202 is the IP address of secondary DNS server. It’s originally developed … Ubuntu – DNS Resolve is not working on 18. For a long time, this file allowed quick and easy configuration of DNS nameservers, as can be seen in an example resolv. Ubuntu by default runs its own copy of dnsmasq locally to do name resolution, so the inherited configuration doesn't work (the kube cluster dnsmasq would need use the ubuntu instance of dnsmasq, which is not possible as it is bound on the lo … This means that if a local installation already uses 3 nameservers or uses more than 3 searches while your glibc version is in the affected list, some of those settings will be lost. The config for DHCP is all in one file and a little less verbose. If you are not using Ubuntu and using some other Linux, then you can also use nscd. But I think this circumvents entries in /etc/hosts/ and it seems to revert to default after reboot anyways. conf is the main configuration file for the DNS name resolver library. Open a terminal and run the below command.

#CONFIGURE FORWARD AND REVERSE LOOKUP ZONES UBUNTU 16.04 UPDATE#

To make sure the system is using dnsmasq, you have to update the /etc/resolv.

#CONFIGURE FORWARD AND REVERSE LOOKUP ZONES UBUNTU 16.04 WINDOWS 10#

The DNS servers and suffixes configured for VPN connections are used in Windows 10 to resolve names using DNS in the Force Tunneling mode (“Use default gateway on remote network” option enabled) if your VPN connection is active. This is wokring for local server perfectly. In this way, DNS alleviates the need to remember IP addresses. You can restart the nscd service on Ubuntu 16. "Ubuntu" and "Debian" Set one to WSL version 1, and the other to WSL version 2 wsl -set-version Ubuntu 1 wsl -set-version Debian 2 Comments: Threaded Linear. 1 and the DNS settings on the router point to 192. (for multiple DNS addresses, a comma-separated list should be used) The forward dns servers can also be altered after enabling the addon. ip link set dev enp0s25 up ip link set dev enp0s25 down. conf”, which will limit the binding to the local interface (lo) so it does not interfere with the libvirt bindings on other interfaces. BIND is the Berkeley Internet Name Domain, DNS server. Ping the IP address of the host you are trying to get to (if it is known) A quick way to prove that it is a DNS issue and not a network issue is to ping the IP address of the host that you are trying to get to. To fix this, create file Add content … If you encounter a network issue in Linux OS such as Ubuntu, the first thing you need to do is to check whether your network configuration is correct or not. The domain controller is acting as an authoritative DNS server for the domain. MulticastDNS is implemented by nss-mdns4_minimal and Avahi. The Nameserver fields are looking for a Domain Name Server (DNS) entry, and not your AD IP. com It should respond with a result similar to the one below. Alter Avahi's configuration to change the mDNS domain from. 04 changed to use systemd-resolved to generate /etc/resolv. Usually flushing the DNS cache can help resolve most of the issues but if it is not working for you then changing the DNS settings might help you because changing the DNS settings in Ubuntu can help us resolve a lot of errors. I have a piHole set up on my network with address 192. In this case, you cannot resolve DNS names in your local network or have Internet access using your internal LAN. local, which is included … Setting DNS Nameservers on Ubuntu Desktop # Setting up DNS nameservers on Ubuntu 18. As I stated - for the most part this works. I find it really weird that a stable release has … B. DHCP subsystem: Provide support for DHCPv4, DHCPv6, BOTP and PXE. PageKite is an open-source tunneled reverse proxy that is capable of bypassing NATs (network address translation), firewalls and making local web servers and SSH servers visible to … About Ubuntu Not Working Dns Wsl. So all my devices couldn´t resolve the other local addresses. Perfect ping response when pinging within local. The configuration of DNS nameservers in Linux were the same for many years, but all things change. Changing local DNS settings does not work as WSL2 has no route to any of the DNS servers I set. 04, add the following repositories to your sources. conf) and I can access the website from the local network but not from the internet. That should display the DNS statistics showing you all the cache in its database.

#Configure forward and reverse lookup zones ubuntu 16.04

0 notes

pinerdish · 3 years ago

Text

Freefilesync windows 8.1

#FREEFILESYNC WINDOWS 8.1 INSTALL#

#FREEFILESYNC WINDOWS 8.1 PORTABLE#

Fully localized user interface available in 30+ languages:.

Serialize multiple users accessing the same (network) folder via folder locking.

Handle daylight saving time changes on FAT/FAT32.

#FREEFILESYNC WINDOWS 8.1 PORTABLE#

FreeFileSync portable and local installation available.Prevent disc space bottlenecks via optimal sync sequence.Access variable-drive-letters by volume name (USB sticks).Expand environment variables like %UserProfile%.Cross-platform: Runs on Windows, Linux, macOS.Fail-safe file copy prevents data corruption.Support long file paths with more than 260 characters.Copy NTFS extended attributes (compressed, encrypted, sparse).Comprehensive and detailed error reporting.Configure handling of Symbolic Links, NTFS Junctions and WSL Symlinks.Detect conflicts and propagate deletions.Copy locked files (Volume Shadow Copy Service).Show drive space usage as a directory tree.Compare and synchronize multiple files in parallel.Manage versions and keep a history of deleted/updated files.Get sync results as an email notification.Detect moved and renamed files and folders.No artificial limits on the number of files to sync.Access files online using SFTP (SSH File Transfer Protocol).Free FTP client: synchronize via FTP (File Transfer Protocol) and FTPS (SSL/TLS).Synchronize mobile devices via MTP (Android, iPhone, tablet, digital camera).Synchronize folders on network shares and local drives.How can I get the download link for the Donation Edition after donating?.Why are some files still different after synchronization?.How can I fix the error "Cannot read/write permissions of "?.Why does Windows Explorer show a different number of items?.Why are network shares not found when synchronizing via Task Scheduler?.How can I record a trace file for troubleshooting file access errors?.FreeFileSync has crashed/is hanging! How can I help with trouble shooting?.How can I report bugs or suggest new features?.My virus scanner/firewall shows a scary warning.

#FREEFILESYNC WINDOWS 8.1 INSTALL#

How can I install FreeFileSync silently via command line?.

How does the portable installation work?.

What is the FreeFileSync Donation Edition?.

Is FreeFileSync still showing an advertisement in its installer?.

Do I need to uninstall FreeFileSync before installing a newer version?.

May I distribute the FreeFileSync installation package?.

Is FreeFileSync free for commercial use?.

Are there limitations on the number of files to sync?.

Which operating systems does FreeFileSync support?.

Which features make FreeFileSync unique?.

Where can I find information about FreeFileSync's advanced features?.

What are the basic steps to use FreeFileSync?.

#Freefilesync windows 8.1

1 note · View note

cextra-loz · 3 years ago

Text

I spent all day trying to download the Twilight Princess decompilation project on my computer I had to learn about linux and WSL and cmd command lines and bullshit and files and whatever the hell and files and python and executables and downloads and things --and I can't do it because there's a read write permission error that's kicking my ass and I can't seem to fix it with CHMOD oh wait no I can if I CHMOD the specific file but there's like 30 billion files i'd have to chmod specifically hell nooo, sorry twilight princess homies I let you down but I tried

#then i'd have to learn binary #and more software stuff #nah #i did my part i tried at least thats as much as you get

1 note · View note

acirwornai · 3 years ago

Text

Windows 10 home single language no remote desktop 無料ダウンロード.Windows 10 Home (Download)

Windows 10 home single language no remote desktop 無料ダウンロード.Windows 10, version 21H1

Windows 10 November 2021 Update.Windows用のリモートデスクトップソフトウェア – AnyDesk

Buy Windows 10 Home and get the best PC experience possible. Explore features for added security and more, and download the latest Windows 10 Home : Microsoft Jan 12, · Windows 10 Home Single Language Edition does not allowed you to install or change languages. The only way to get different languages is to upgrade to Windows 10 PRO Single Language edition. Not actually true - you can install a different language version of Home with same licence key, but each install only has one language Sep 10, · Release Preview channel: Preview fixes and key features on the next version of Windows just before its available to the general public. Additional resources. Windows Command Line Blog: Install WSL with a single command now available in Windows 10 version and higher; Feedback

Windows 10 home single language no remote desktop 無料ダウンロード.Chrome Remote Desktop

Buy Windows 10 Home and get the best PC experience possible. Explore features for added security and more, and download the latest Windows 10 Home : Microsoft Windows 8/ Single Language Windows 8 Single Language with Bing Windows 10 Home Windows 10 Pro Windows 10 の ISO ファイルをダウンロードするためにメディア作成ツールを使用した場合は、これらの手順に従う前に、ISO ファイルを DVD に書き込む必要があ Apr 04, · To start a Remote Desktop Connection, Hold Windows key and Press R. Type mstsc and Click OK. Type the computer name or IP address of the system you are going to access and click Connect. Make sure the account through which you are going to access a system remotely has a password as accounts with no passwords cannot access a computer

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support. Feedback will be sent to Microsoft: By pressing the submit button, your feedback will be used to improve Microsoft products and services. Privacy policy. Find information on known issues and the status of the rollout for Windows 10, version 21H1. Looking for a specific issue?

Want the latest Windows release health updates? Follow WindowsUpdate on Twitter. Skip to main content. This browser is no longer supported.

Download Microsoft Edge More info. Contents Exit focus mode. Save Edit Share Twitter LinkedIn Facebook Email. Please rate your experience Yes No. Any additional feedback? Windows 10, version 21H1 is designated for broad deployment. As always, we recommend that you update your devices to the latest version of Windows 10 as soon as possible to ensure that you can take advantage of the latest features and advanced protections from the latest security threats.

For more details, see How to get the Windows 10 May Update. Windows 11 is now available Explore this latest release. How to get Windows 11 Explore the upgrade experience. This table offers a summary of current active issues and those issues that have been resolved in the last 30 days. After installing KB or later updates, Microsoft Installer MSI might have issues repairing or updating apps.

Apps that are known to be affected include some apps from Kaspersky. Affected apps might fail to open after an update or repair has been attempted. Workaround: To mitigate this issue, you will need to uninstall the affected app, then install the latest version of the app. Resolution: This issue was resolved in KB This update should prevent the issue from occurring again, but you might need to reinstall affected apps, if they will not open.

After installing KB or a later update, certain apps might have unexpected results when rendering some user interface elements or when drawing within the app. After installation of KB , Windows print clients might encounter the following errors when connecting to a remote printer shared on a Windows print server:.

Note: The printer connection issues described in this issue are specific to print servers and are not commonly observed in devices designed for home use. Printing environments affected by this issue are more commonly found in enterprises and organizations. Workaround : You can take steps to workaround this issue on print servers that meet the following prerequisite:.

Ensure that network security and VPN solutions allow print clients to establish RPC over TCP connections to print server over the following port range:. You also benefit from using client side rendering for print jobs. The 'Render print jobs on client computers' option is available from the printer's device Properties, and it is recommended that its checkbox is selected on the print server.

Note this step will not help if clients have overwrites which prevent the server setting from taking effect. After installing KB or later updates, when connecting to devices in an untrusted domain using Remote Desktop, connections might fail to authenticate when using smart card authentication. You might receive the prompt, "Your credentials did not work. The credentials that were used to connect to [device name] did not work.

Please enter new credentials. Resolution: This issue is resolved using Known Issue Rollback KIR. Please note that it might take up to 24 hours for the resolution to propagate automatically to consumer devices and non-managed business devices.

Restarting your Windows device might help the resolution apply to your device faster. For enterprise-managed devices that have installed an affected update and encountered this issue, it can be resolved by installing and configuring a special Group Policy linked below.

Note Devices need to be restarted after configuring the special Group Policy. For help, please see How to use Group Policy to deploy a Known Issue Rollback. For general information on using Group Policies, see Group Policy Overview. Important Verify that you are using the correct Group Policy for your version of Windows. In this article. Connections to printers shared via print server might encounter errors This issue is observed when print clients try to connect to a remote printer shared on a print server.

OS Build Resolved KB Microsoft Installer might have issues updating or repairing apps Affected apps might fail to open after an update or repair has been attempted.

Smartcard authentication might fail when attempting to connect using Remote Desktop Devices attempting to make Remote Desktop connections to devices in untrusted domains might be unable to connect. Microsoft Installer might have issues updating or repairing apps. Originating update. Affected platforms: Client: Windows 11, version 21H2; Windows 10, version 21H2; Windows 10, version 21H1; Windows 10, version 20H2; Windows 10, version ; Windows 10, version ; Windows 10, version ; Windows 10 Enterprise LTSC ; Windows 10 Enterprise LTSC ; Windows 10, version ; Windows 10 Enterprise LTSB; Windows 8.

UI elements and drawing within some apps may not work as expected. Affected platforms: Client: Windows 11, version 21H2; Windows 10, version 21H1; Windows 10, version 20H2; Windows 10, version ; Windows 10, version ; Windows 10, version ; Windows 10 Enterprise LTSC ; Windows 10, version ; Windows 10 Enterprise LTSB; Windows 8.

Connections to printers shared via print server might encounter errors. Workaround : You can take steps to workaround this issue on print servers that meet the following prerequisite: Print clients must have installed a Windows update released on or after January before the print server has installed KB Ensure that network security and VPN solutions allow print clients to establish RPC over TCP connections to print server over the following port range: Default start port: Default end port: Port Range: ports Please refer to these articles for further guidance: How to configure RPC to use certain ports and how to help secure those ports by using IPsec.

Affected platforms: Client: Windows 11, version 21H2; Windows 10, version 21H1; Windows 10, version 21H1; Windows 10, version 20H2; Windows 10, version ; Windows 10, version ; Windows 10, version ; Windows 10 Enterprise LTSC ; Windows 10 Enterprise LTSC ; Windows 10, version ; Windows 10 Enterprise LTSB; Windows 8. Smartcard authentication might fail when attempting to connect using Remote Desktop. Affected platforms: Client: Windows 10, version 21H1; Windows 10, version 20H2; Windows 10, version Server: Windows Server ; Windows Server, version 20H2; Windows Server, version Resolution: This issue is resolved using Known Issue Rollback KIR.

Group Policy installation files: Windows Server Windows 10, version , Windows 10, version 20H2 and Windows 10, version 21H1 Important Verify that you are using the correct Group Policy for your version of Windows.

0 notes

kidblog191 · 4 years ago

Text

Docker Bundle Install

Estimated reading time: 15 minutes

Docker Ruby On Rails Bundle Install

Docker Bundle Install Not Working

Install OpenProject with Docker. Docker is a way to distribute self-contained applications easily. We provide a Docker image for the Community Edition that you can very easily install and upgrade on your servers. Docker: version 1.9.0 or later; Running Docker Image sudo docker run -i -t -d -p 80:80 onlyoffice/documentserver Use this command if you wish to install ONLYOFFICE Document Server separately. To install ONLYOFFICE Document Server integrated with Community and Mail Servers, refer to the corresponding instructions below. Configuring Docker Image. The Docker Desktop menu allows you to configure your Docker settings such as installation, updates, version channels, Docker Hub login, and more. This section explains the configuration options accessible from the Settings dialog. Open the Docker Desktop menu by clicking the Docker icon in the Notifications area (or System tray).

Welcome to Docker Desktop! The Docker Desktop for Windows user manual provides information on how to configure and manage your Docker Desktop settings.

For information about Docker Desktop download, system requirements, and installation instructions, see Install Docker Desktop.

Settings

The Docker Desktop menu allows you to configure your Docker settings such as installation, updates, version channels, Docker Hub login,and more.

This section explains the configuration options accessible from the Settings dialog.

Open the Docker Desktop menu by clicking the Docker icon in the Notifications area (or System tray):

Select Settings to open the Settings dialog:

General

On the General tab of the Settings dialog, you can configure when to start and update Docker.

Start Docker when you log in - Automatically start Docker Desktop upon Windows system login. Macos mojave installer size.

Expose daemon on tcp://localhost:2375 without TLS - Click this option to enable legacy clients to connect to the Docker daemon. You must use this option with caution as exposing the daemon without TLS can result in remote code execution attacks.

Send usage statistics - By default, Docker Desktop sends diagnostics,crash reports, and usage data. This information helps Docker improve andtroubleshoot the application. Clear the check box to opt out. Docker may periodically prompt you for more information.

Resources

The Resources tab allows you to configure CPU, memory, disk, proxies, network, and other resources. Different settings are available for configuration depending on whether you are using Linux containers in WSL 2 mode, Linux containers in Hyper-V mode, or Windows containers.

Advanced

Note

The Advanced tab is only available in Hyper-V mode, because in WSL 2 mode and Windows container mode these resources are managed by Windows. In WSL 2 mode, you can configure limits on the memory, CPU, and swap size allocatedto the WSL 2 utility VM.

Use the Advanced tab to limit resources available to Docker.

CPUs: By default, Docker Desktop is set to use half the number of processorsavailable on the host machine. To increase processing power, set this to ahigher number; to decrease, lower the number.

Memory: By default, Docker Desktop is set to use 2 GB runtime memory,allocated from the total available memory on your machine. To increase the RAM, set this to a higher number. To decrease it, lower the number.

Swap: Configure swap file size as needed. The default is 1 GB.

Disk image size: Specify the size of the disk image.

Disk image location: Specify the location of the Linux volume where containers and images are stored.

You can also move the disk image to a different location. If you attempt to move a disk image to a location that already has one, you get a prompt asking if you want to use the existing image or replace it.

File sharing

Note

The File sharing tab is only available in Hyper-V mode, because in WSL 2 mode and Windows container mode all files are automatically shared by Windows.

Use File sharing to allow local directories on Windows to be shared with Linux containers.This is especially useful forediting source code in an IDE on the host while running and testing the code in a container.Note that configuring file sharing is not necessary for Windows containers, only Linux containers. If a directory is not shared with a Linux container you may get file not found or cannot start service errors at runtime. See Volume mounting requires shared folders for Linux containers.

File share settings are:

Add a Directory: Click + and navigate to the directory you want to add.

Apply & Restart makes the directory available to containers using Docker’sbind mount (-v) feature.

Tips on shared folders, permissions, and volume mounts

Share only the directories that you need with the container. File sharing introduces overhead as any changes to the files on the host need to be notified to the Linux VM. Sharing too many files can lead to high CPU load and slow filesystem performance.

Shared folders are designed to allow application code to be edited on the host while being executed in containers. For non-code items such as cache directories or databases, the performance will be much better if they are stored in the Linux VM, using a data volume (named volume) or data container.

Docker Desktop sets permissions to read/write/execute for users, groups and others 0777 or a+rwx.This is not configurable. See Permissions errors on data directories for shared volumes.

Windows presents a case-insensitive view of the filesystem to applications while Linux is case-sensitive. On Linux it is possible to create 2 separate files: test and Test, while on Windows these filenames would actually refer to the same underlying file. This can lead to problems where an app works correctly on a developer Windows machine (where the file contents are shared) but fails when run in Linux in production (where the file contents are distinct). To avoid this, Docker Desktop insists that all shared files are accessed as their original case. Therefore if a file is created called test, it must be opened as test. Attempts to open Test will fail with “No such file or directory”. Similarly once a file called test is created, attempts to create a second file called Test will fail.

Shared folders on demand

You can share a folder “on demand” the first time a particular folder is used by a container.

If you run a Docker command from a shell with a volume mount (as shown in theexample below) or kick off a Compose file that includes volume mounts, you get apopup asking if you want to share the specified folder.

You can select to Share it, in which case it is added your Docker Desktop Shared Folders list and available tocontainers. Alternatively, you can opt not to share it by selecting Cancel.

Proxies

Docker Desktop lets you configure HTTP/HTTPS Proxy Settings andautomatically propagates these to Docker. For example, if you set your proxysettings to http://proxy.example.com, Docker uses this proxy when pulling containers.

Your proxy settings, however, will not be propagated into the containers you start.If you wish to set the proxy settings for your containers, you need to defineenvironment variables for them, just like you would do on Linux, for example:

For more information on setting environment variables for running containers,see Set environment variables.

Network

Note

The Network tab is not available in Windows container mode because networking is managed by Windows. Install ipsw macos catalina installer.

You can configure Docker Desktop networking to work on a virtual private network (VPN). Specify a network address translation (NAT) prefix and subnet mask to enable Internet connectivity.

DNS Server: You can configure the DNS server to use dynamic or static IP addressing.

Note

Some users reported problems connecting to Docker Hub on Docker Desktop. This would manifest as an error when trying to rundocker commands that pull images from Docker Hub that are not alreadydownloaded, such as a first time run of docker run hello-world. If youencounter this, reset the DNS server to use the Google DNS fixed address:8.8.8.8. For more information, seeNetworking issues in Troubleshooting.

Updating these settings requires a reconfiguration and reboot of the Linux VM.

WSL Integration

In WSL 2 mode, you can configure which WSL 2 distributions will have the Docker WSL integration.

By default, the integration will be enabled on your default WSL distribution. To change your default WSL distro, run wsl --set-default <distro name>. (For example, to set Ubuntu as your default WSL distro, run wsl --set-default ubuntu).

You can also select any additional distributions you would like to enable the WSL 2 integration on.

For more details on configuring Docker Desktop to use WSL 2, see Docker Desktop WSL 2 backend.

Docker Engine

The Docker Engine page allows you to configure the Docker daemon to determine how your containers run.

Type a JSON configuration file in the box to configure the daemon settings. For a full list of options, see the Docker Enginedockerd commandline reference.

Click Apply & Restart to save your settings and restart Docker Desktop.

Command Line

On the Command Line page, you can specify whether or not to enable experimental features.

You can toggle the experimental features on and off in Docker Desktop. If you toggle the experimental features off, Docker Desktop uses the current generally available release of Docker Engine.

Experimental features

Experimental features provide early access to future product functionality.These features are intended for testing and feedback only as they may changebetween releases without warning or can be removed entirely from a futurerelease. Experimental features must not be used in production environments.Docker does not offer support for experimental features.

For a list of current experimental features in the Docker CLI, see Docker CLI Experimental features.

Run docker version to verify whether you have enabled experimental features. Experimental modeis listed under Server data. If Experimental is true, then Docker isrunning in experimental mode, as shown here:

Kubernetes

Note

The Kubernetes tab is not available in Windows container mode.

Docker Desktop includes a standalone Kubernetes server that runs on your Windows machince, sothat you can test deploying your Docker workloads on Kubernetes. To enable Kubernetes support and install a standalone instance of Kubernetes running as a Docker container, select Enable Kubernetes.

For more information about using the Kubernetes integration with Docker Desktop, see Deploy on Kubernetes.

Reset

The Restart Docker Desktop and Reset to factory defaults options are now available on the Troubleshoot menu. For information, see Logs and Troubleshooting.

Troubleshoot

Visit our Logs and Troubleshooting guide for more details.

Log on to our Docker Desktop for Windows forum to get help from the community, review current user topics, or join a discussion.

Log on to Docker Desktop for Windows issues on GitHub to report bugs or problems and review community reported issues.

For information about providing feedback on the documentation or update it yourself, see Contribute to documentation.

Switch between Windows and Linux containers

From the Docker Desktop menu, you can toggle which daemon (Linux or Windows)the Docker CLI talks to. Select Switch to Windows containers to use Windowscontainers, or select Switch to Linux containers to use Linux containers(the default).

For more information on Windows containers, refer to the following documentation:

Microsoft documentation on Windows containers.

Build and Run Your First Windows Server Container (Blog Post)gives a quick tour of how to build and run native Docker Windows containers on Windows 10 and Windows Server 2016 evaluation releases.

Getting Started with Windows Containers (Lab)shows you how to use the MusicStoreapplication with Windows containers. The MusicStore is a standard .NET application and,forked here to use containers, is a good example of a multi-container application.

To understand how to connect to Windows containers from the local host, seeLimitations of Windows containers for localhost and published ports

Settings dialog changes with Windows containers

When you switch to Windows containers, the Settings dialog only shows those tabs that are active and apply to your Windows containers:

If you set proxies or daemon configuration in Windows containers mode, theseapply only on Windows containers. If you switch back to Linux containers,proxies and daemon configurations return to what you had set for Linuxcontainers. Your Windows container settings are retained and become availableagain when you switch back.

Dashboard

The Docker Desktop Dashboard enables you to interact with containers and applications and manage the lifecycle of your applications directly from your machine. The Dashboard UI shows all running, stopped, and started containers with their state. It provides an intuitive interface to perform common actions to inspect and manage containers and Docker Compose applications. For more information, see Docker Desktop Dashboard.

Docker Hub

Select Sign in /Create Docker ID from the Docker Desktop menu to access your Docker Hub account. Once logged in, you can access your Docker Hub repositories directly from the Docker Desktop menu.

For more information, refer to the following Docker Hub topics:

Two-factor authentication

Docker Desktop enables you to sign into Docker Hub using two-factor authentication. Two-factor authentication provides an extra layer of security when accessing your Docker Hub account.

You must enable two-factor authentication in Docker Hub before signing into your Docker Hub account through Docker Desktop. For instructions, see Enable two-factor authentication for Docker Hub.

After you have enabled two-factor authentication:

Go to the Docker Desktop menu and then select Sign in / Create Docker ID.

Enter your Docker ID and password and click Sign in.

After you have successfully signed in, Docker Desktop prompts you to enter the authentication code. Enter the six-digit code from your phone and then click Verify.

After you have successfully authenticated, you can access your organizations and repositories directly from the Docker Desktop menu.

Adding TLS certificates

You can add trusted Certificate Authorities (CAs) to your Docker daemon to verify registry server certificates, and client certificates, to authenticate to registries.

How do I add custom CA certificates?

Docker Desktop supports all trusted Certificate Authorities (CAs) (root orintermediate). Docker recognizes certs stored under Trust RootCertification Authorities or Intermediate Certification Authorities.

Docker Desktop creates a certificate bundle of all user-trusted CAs based onthe Windows certificate store, and appends it to Moby trusted certificates. Therefore, if an enterprise SSL certificate is trusted by the user on the host, it is trusted by Docker Desktop.

To learn more about how to install a CA root certificate for the registry, seeVerify repository client with certificatesin the Docker Engine topics.

How do I add client certificates?

You can add your client certificatesin ~/.docker/certs.d/<MyRegistry>:<Port>/client.cert and~/.docker/certs.d/<MyRegistry>:<Port>/client.key. You do not need to push your certificates with git commands.

When the Docker Desktop application starts, it copies the~/.docker/certs.d folder on your Windows system to the /etc/docker/certs.ddirectory on Moby (the Docker Desktop virtual machine running on Hyper-V).

You need to restart Docker Desktop after making any changes to the keychainor to the ~/.docker/certs.d directory in order for the changes to take effect.

The registry cannot be listed as an insecure registry (seeDocker Daemon). Docker Desktop ignorescertificates listed under insecure registries, and does not send clientcertificates. Commands like docker run that attempt to pull from the registryproduce error messages on the command line, as well as on the registry.

Docker Ruby On Rails Bundle Install

To learn more about how to set the client TLS certificate for verification, seeVerify repository client with certificatesin the Docker Engine topics.

Where to go next

Try out the walkthrough at Get Started.

Dig in deeper with Docker Labs example walkthroughs and source code.

Refer to the Docker CLI Reference Guide.

Docker Bundle Install Not Working

windows, edge, tutorial, run, docker, local, machine

0 notes

luckyloading560 · 4 years ago

Text

Docker Commands Windows

Docker Commands Windows Server 2016

MongoDB document databases provide high availability and easy scalability. You do not need to push your certificates with git commands. When the Docker Desktop application starts, it copies the /.docker/certs.d folder on your Windows system to the /etc/docker/certs.d directory on Moby (the Docker Desktop virtual machine running on Hyper-V). Docker Desktop for Windows can’t route traffic to Linux containers. However, you can ping the Windows containers. Per-container IP addressing is not possible. The docker (Linux) bridge network is not reachable from the Windows host. However, it works with Windows containers. Use cases and workarounds.

Estimated reading time: 15 minutes

Welcome to Docker Desktop! The Docker Desktop for Windows user manual provides information on how to configure and manage your Docker Desktop settings.

For information about Docker Desktop download, system requirements, and installation instructions, see Install Docker Desktop.

Settings

The Docker Desktop menu allows you to configure your Docker settings such as installation, updates, version channels, Docker Hub login,and more.

This section explains the configuration options accessible from the Settings dialog.

Open the Docker Desktop menu by clicking the Docker icon in the Notifications area (or System tray):

Select Settings to open the Settings dialog:

General

On the General tab of the Settings dialog, you can configure when to start and update Docker.

Start Docker when you log in - Automatically start Docker Desktop upon Windows system login.

Resources

Advanced

Note

Use the Advanced tab to limit resources available to Docker.

CPUs: By default, Docker Desktop is set to use half the number of processorsavailable on the host machine. To increase processing power, set this to ahigher number; to decrease, lower the number.

Swap: Configure swap file size as needed. The default is 1 GB.

Disk image size: Specify the size of the disk image.

Disk image location: Specify the location of the Linux volume where containers and images are stored.

Download Apple MacOS High Sierra for Mac to get a boost with new technologies in the latest Mac OS update coming fall 2017. Apple download sierra.

File sharing

Note

The File sharing tab is only available in Hyper-V mode, because in WSL 2 mode and Windows container mode all files are automatically shared by Windows.

File share settings are:

Add a Directory: Click + and navigate to the directory you want to add.

Apply & Restart makes the directory available to containers using Docker’sbind mount (-v) feature.

Tips on shared folders, permissions, and volume mounts

Docker Desktop sets permissions to read/write/execute for users, groups and others 0777 or a+rwx.This is not configurable. See Permissions errors on data directories for shared volumes.

Shared folders on demand

You can share a folder “on demand” the first time a particular folder is used by a container.

You can select to Share it, in which case it is added your Docker Desktop Shared Folders list and available tocontainers. Alternatively, you can opt not to share it by selecting Cancel.

Proxies

For more information on setting environment variables for running containers,see Set environment variables.

Network

Note

The Network tab is not available in Windows container mode because networking is managed by Windows.

You can configure Docker Desktop networking to work on a virtual private network (VPN). Specify a network address translation (NAT) prefix and subnet mask to enable Internet connectivity.

DNS Server: You can configure the DNS server to use dynamic or static IP addressing.

Note

Updating these settings requires a reconfiguration and reboot of the Linux VM.

WSL Integration

In WSL 2 mode, you can configure which WSL 2 distributions will have the Docker WSL integration.

You can also select any additional distributions you would like to enable the WSL 2 integration on.

For more details on configuring Docker Desktop to use WSL 2, see Docker Desktop WSL 2 backend.

Docker Engine

The Docker Engine page allows you to configure the Docker daemon to determine how your containers run.

Type a JSON configuration file in the box to configure the daemon settings. For a full list of options, see the Docker Enginedockerd commandline reference.

Click Apply & Restart to save your settings and restart Docker Desktop.

Command Line

On the Command Line page, you can specify whether or not to enable experimental features.

You can toggle the experimental features on and off in Docker Desktop. If you toggle the experimental features off, Docker Desktop uses the current generally available release of Docker Engine. Final cut pro mac app store.

Experimental features

For a list of current experimental features in the Docker CLI, see Docker CLI Experimental features.

Run docker version to verify whether you have enabled experimental features. Experimental modeis listed under Server Adobe photoshop 2020 patcher windows. data. Sonos controller mac 10.6.8 download. If Experimental is true, then Docker isrunning in experimental mode, as shown here:

Kubernetes

Note

The Kubernetes tab is not available in Windows container mode.

For more information about using the Kubernetes integration with Docker Desktop, see Deploy on Kubernetes.

Reset

The Restart Docker Desktop and Reset to factory defaults options are now available on the Troubleshoot menu. For information, see Logs and Troubleshooting.

Troubleshoot

Visit our Logs and Troubleshooting guide for more details.

Log on to our Docker Desktop for Windows forum to get help from the community, review current user topics, or join a discussion.

Log on to Docker Desktop for Windows issues on GitHub to report bugs or problems and review community reported issues.

For information about providing feedback on the documentation or update it yourself, see Contribute to documentation.

Switch between Windows and Linux containers

For more information on Windows containers, refer to the following documentation:

Microsoft documentation on Windows containers.

Build and Run Your First Windows Server Container (Blog Post)gives a quick tour of how to build and run native Docker Windows containers on Windows 10 and Windows Server 2016 evaluation releases.

To understand how to connect to Windows containers from the local host, seeLimitations of Windows containers for localhost and published ports

Settings dialog changes with Windows containers

When you switch to Windows containers, the Settings dialog only shows those tabs that are active and apply to your Windows containers:

Dashboard

Docker Hub

Docker Commands Windows

Select Sign in /Create Docker ID from the Docker Desktop menu to access your Docker Hub account. Once logged in, you can access your Docker Hub repositories directly from the Docker Desktop menu.

For more information, refer to the following Docker Hub topics:

Two-factor authentication

Docker Desktop enables you to sign into Docker Hub using two-factor authentication. Two-factor authentication provides an extra layer of security when accessing your Docker Hub account.

You must enable two-factor authentication in Docker Hub before signing into your Docker Hub account through Docker Desktop. For instructions, see Enable two-factor authentication for Docker Hub.

Docker Desktop for Windows user manual. Estimated reading time: 17 minutes. Welcome to Docker Desktop! The Docker Desktop for Windows user manual provides information on how to configure and manage your Docker Desktop settings. The fastest and easiest way to get started with Docker on Windows. Docker Desktop is an application for MacOS and Windows machines for the building and sharing of containerized applications and microservices. Docker Desktop delivers the speed, choice and security you need for designing and delivering containerized applications on your desktop. I have the same thing, but I also noticed that Hyper-V has to be enabled. As in, if your copy of Windows 10 has Hyper-V, you can install it by simply enabling it because it’s already there. On Windows 10 Home, though, there is no Hyper-V to enable. I also have Windows 10 Home. The only option for Home edition users is to use Docker. Docker supports Docker Desktop on Windows for those versions of Windows 10 that are still within Microsoft’s servicing timeline. What’s included in the installer The Docker Desktop installation includes Docker Engine, Docker CLI client, Docker Compose, Notary, Kubernetes, and Credential Helper. https://luckyloading560.tumblr.com/post/653769899713380352/docker-windows-home-edition.

After you have enabled two-factor authentication:

Docker Commands Windows Server 2016

Go to the Docker Desktop menu and then select Sign in / Create Docker ID.

Enter your Docker ID and password and click Sign in.

After you have successfully signed in, Docker Desktop prompts you to enter the authentication code. Enter the six-digit code from your phone and then click Verify.

After you have successfully authenticated, you can access your organizations and repositories directly from the Docker Desktop menu.

Adding TLS certificates

You can add trusted Certificate Authorities (CAs) to your Docker daemon to verify registry server certificates, and client certificates, to authenticate to registries.

How do I add custom CA certificates?

To learn more about how to install a CA root certificate for the registry, seeVerify repository client with certificatesin the Docker Engine topics.

How do I add client certificates?

You need to restart Docker Desktop after making any changes to the keychainor to the ~/.docker/certs.d directory in order for the changes to take effect.

To learn more about how to set the client TLS certificate for verification, seeVerify repository client with certificatesin the Docker Engine topics.

Where to go next

Try out the walkthrough at Get Started.

Dig in deeper with Docker Labs example walkthroughs and source code.

Refer to the Docker CLI Reference Guide.

windows, edge, tutorial, run, docker, local, machine

0 notes

swimmingeaglestarlight · 4 years ago

Text

Visual Studio Code Apt

Visit the VS Code install page and select the 32 or 64 bit installer. Install Visual Studio Code on Windows (not in your WSL file system). When prompted to Select Additional Tasks during installation, be sure to check the Add to PATH option so you can easily open a folder in WSL using the code command. Visual Studio Code is a free and open-source, cross-platform IDE or code editor that enables developers to develop applications and write code using a myriad of programming languages such as C, C, Python, Go and Java to mention a few. To Install Visual Studio Code on Debian, Ubuntu and Linux Mint: 1. Update your system by running the command. Introduction to Visual Studio Code. Introduction to Visual Studio Code. Skip to Content Current Page: Blog About Contact FAQs. Now, to install the Visual Studio Code DEB package file, run the APT command as follows. $ sudo apt install. / code.deb The APT package manager should start installing the DEB package file. At this point, Visual Studio Code should be installed.

Visual Studio Code Apt

Visual Studio Code Apt Install

Apt Remove Visual Studio Code

Installation

See the Download Visual Studio Code page for a complete list of available installation options.

By downloading and using Visual Studio Code, you agree to the license terms and privacy statement.

Snap

Visual Studio Code is officially distributed as a Snap package in the Snap Store:

You can install it by running:

Once installed, the Snap daemon will take care of automatically updating VS Code in the background. You will get an in-product update notification whenever a new update is available.

Note: If snap isn't available in your Linux distribution, please check the following Installing snapd guide, which can help you get that set up.

Learn more about snaps from the official Snap Documentation.

Debian and Ubuntu based distributions

The easiest way to install Visual Studio Code for Debian/Ubuntu based distributions is to download and install the .deb package (64-bit), either through the graphical software center if it's available, or through the command line with:

Note that other binaries are also available on the VS Code download page.

Installing the .deb package will automatically install the apt repository and signing key to enable auto-updating using the system's package manager. Alternatively, the repository and key can also be installed manually with the following script:

Then update the package cache and install the package using:

RHEL, Fedora, and CentOS based distributions

We currently ship the stable 64-bit VS Code in a yum repository, the following script will install the key and repository:

Then update the package cache and install the package using dnf (Fedora 22 and above):

Or on older versions using yum:

Due to the manual signing process and the system we use to publish, the yum repo may lag behind and not get the latest version of VS Code immediately.

openSUSE and SLE-based distributions

The yum repository above also works for openSUSE and SLE-based systems, the following script will install the key and repository:

Then update the package cache and install the package using:

AUR package for Arch Linux

There is a community-maintained Arch User Repository package for VS Code.

To get more information about the installation from the AUR, please consult the following wiki entry: Install AUR Packages.

Nix package for NixOS (or any Linux distribution using Nix package manager)

There is a community maintained VS Code Nix package in the nixpkgs repository. In order to install it using Nix, set allowUnfree option to true in your config.nix and execute:

Installing .rpm package manually

The VS Code .rpm package (64-bit) can also be manually downloaded and installed, however, auto-updating won't work unless the repository above is installed. Once downloaded it can be installed using your package manager, for example with dnf:

Note that other binaries are also available on the VS Code download page.

Updates

VS Code ships monthly and you can see when a new release is available by checking the release notes. If the VS Code repository was installed correctly, then your system package manager should handle auto-updating in the same way as other packages on the system.

Note: Updates are automatic and run in the background for the Snap package.

Node.js

Node.js is a popular platform and runtime for easily building and running JavaScript applications. It also includes npm, a Package Manager for Node.js modules. You'll see Node.js and npm mentioned frequently in our documentation and some optional VS Code tooling requires Node.js (for example, the VS Code extension generator).

If you'd like to install Node.js on Linux, see Installing Node.js via package manager to find the Node.js package and installation instructions tailored to your Linux distribution. You can also install and support multiple versions of Node.js by using the Node Version Manager.

To learn more about JavaScript and Node.js, see our Node.js tutorial, where you'll learn about running and debugging Node.js applications with VS Code.

Setting VS Code as the default text editor

xdg-open

You can set the default text editor for text files (text/plain) that is used by xdg-open with the following command:

Debian alternatives system

Debian-based distributions allow setting a default editor using the Debian alternatives system, without concern for the MIME type. You can set this by running the following and selecting code:

If Visual Studio Code doesn't show up as an alternative to editor, you need to register it:

Windows as a Linux developer machine

Another option for Linux development with VS Code is to use a Windows machine with the Windows Subsystem for Linux (WSL).

Windows Subsystem for Linux

Visual Studio Code Apt

With WSL, you can install and run Linux distributions on Windows. This enables you to develop and test your source code on Linux while still working locally on a Windows machine. WSL supports Linux distributions such as Ubuntu, Debian, SUSE, and Alpine available from the Microsoft Store.

When coupled with the Remote - WSL extension, you get full VS Code editing and debugging support while running in the context of a Linux distro on WSL.

See the Developing in WSL documentation to learn more or try the Working in WSL introductory tutorial.

Next steps

Once you have installed VS Code, these topics will help you learn more about it:

Additional Components - Learn how to install Git, Node.js, TypeScript, and tools like Yeoman.

User Interface - A quick orientation to VS Code.

User/Workspace Settings - Learn how to configure VS Code to your preferences through settings.

Common questions

Azure VM Issues

I'm getting a 'Running without the SUID sandbox' error?

You can safely ignore this error.

Debian and moving files to trash

If you see an error when deleting files from the VS Code Explorer on the Debian operating system, it might be because the trash implementation that VS Code is using is not there.

Run these commands to solve this issue:

Conflicts with VS Code packages from other repositories

Some distributions, for example Pop!_OS provide their own code package. To ensure the official VS Code repository is used, create a file named /etc/apt/preferences.d/code with the following content:

'Visual Studio Code is unable to watch for file changes in this large workspace' (error ENOSPC)

When you see this notification, it indicates that the VS Code file watcher is running out of handles because the workspace is large and contains many files. Before adjusting platform limits, make sure that potentially large folders, such as Python .venv, are added to the files.watcherExclude setting (more details below). The current limit can be viewed by running:

The limit can be increased to its maximum by editing /etc/sysctl.conf (except on Arch Linux, read below) and adding this line to the end of the file:

The new value can then be loaded in by running sudo sysctl -p.

While 524,288 is the maximum number of files that can be watched, if you're in an environment that is particularly memory constrained, you may wish to lower the number. Each file watch takes up 1080 bytes, so assuming that all 524,288 watches are consumed, that results in an upper bound of around 540 MiB.

Arch-based distros (including Manjaro) require you to change a different file; follow these steps instead.

Another option is to exclude specific workspace directories from the VS Code file watcher with the files.watcherExcludesetting. The default for files.watcherExclude excludes node_modules and some folders under .git, but you can add other directories that you don't want VS Code to track.

I can't see Chinese characters in Ubuntu

We're working on a fix. In the meantime, open the application menu, then choose File > Preferences > Settings. In the Text Editor > Font section, set 'Font Family' to Droid Sans Mono, Droid Sans Fallback. If you'd rather edit the settings.json file directly, set editor.fontFamily as shown:

Package git is not installed

This error can appear during installation and is typically caused by the package manager's lists being out of date. Try updating them and installing again:

The code bin command does not bring the window to the foreground on Ubuntu

Running code . on Ubuntu when VS Code is already open in the current directory will not bring VS Code into the foreground. This is a feature of the OS which can be disabled using ccsm.

Under General > General Options > Focus & Raise Behaviour, set 'Focus Prevention Level' to 'Off'. Remember this is an OS-level setting that will apply to all applications, not just VS Code.

Visual Studio Code Apt Install

Cannot install .deb package due to '/etc/apt/sources.list.d/vscode.list: No such file or directory'

This can happen when sources.list.d doesn't exist or you don't have access to create the file. To fix this, try manually creating the folder and an empty vscode.list file:

Cannot move or resize the window while X forwarding a remote window

If you are using X forwarding to use VS Code remotely, you will need to use the native title bar to ensure you can properly manipulate the window. You can switch to using it by setting window.titleBarStyle to native.

Using the custom title bar

The custom title bar and menus were enabled by default on Linux for several months. The custom title bar has been a success on Windows, but the customer response on Linux suggests otherwise. Based on feedback, we have decided to make this setting opt-in on Linux and leave the native title bar as the default.

Apt Remove Visual Studio Code

The custom title bar provides many benefits including great theming support and better accessibility through keyboard navigation and screen readers. Unfortunately, these benefits do not translate as well to the Linux platform. Linux has a variety of desktop environments and window managers that can make the VS Code theming look foreign to users. For users needing the accessibility improvements, we recommend enabling the custom title bar when running in accessibility mode using a screen reader. You can still manually set the title bar with the Window: Title Bar Style (window.titleBarStyle) setting.

Broken cursor in editor with display scaling enabled

Due to an upstream issue #14787 with Electron, the mouse cursor may render incorrectly with scaling enabled. If you notice that the usual text cursor is not being rendered inside the editor as you would expect, try falling back to the native menu bar by configuring the setting window.titleBarStyle to native.

Repository changed its origin value

If you receive an error similar to the following:

Use apt instead of apt-get and you will be prompted to accept the origin change:

0 notes

enterinit · 5 years ago

Text

Windows 10 Insider Preview Build 19613

Windows 10 Insider Preview Build 19613.

Other updates for Insiders

Cortana app update We’re starting to roll out a Cortana app update for Insiders in the Fast ring that will turn on Bing Answers and Assistant Conversations for the following regions and languages: Australia: EnglishBrazil: PortugueseCanada: English/FrenchFrance: FrenchGermany: GermanIndia: EnglishItaly: ItalianJapan: JapaneseMexico: SpanishSpain: SpanishUnited Kingdom: English If you use Windows in one of these languages, here are some examples to try with the update: What’s the weather?What can you do?Convert one inch to centimeters Look for version 2.2004.1706.0 to know you’ve received the update. This is a staggered rollout, so you may not see it right away.

Fixes

We fixed an issue that was causing app icons in the taskbar to not display correctly, including defaulting to the .exe icon. This issue may have also caused some Insiders to have more reliability issues with explorer.exe.We fixed an issue impacting Windows Forms applications where the ImmSetOpenStatus() API wasn’t changing the IME mode correctly when setting focus to text fields while using the new Japanese or Chinese IMEs.We fixed an issue from recent builds for Insiders with multiple monitors, resulting in Visual Studio sometimes not responding to clicks.We fixed an issue where the doskey / listsize command had no effect.We fixed an issue where the doskey /reinstall command killed the commandline session rather than reloading doskey.We fixed an issue that could result in Settings crashing when uninstalling a font.We fixed an issue impacting some users that could result in Task Manager always showing 0 seconds for Last BIOS Time. We’ve made some improvements to address an underlying issue that could result in a black screen for some users for a while after logging in. If you continue seeing this issue, please try pressing WIN+Shift+Ctrl+B and then log feedback in the Feedback Hub.

Known issues

We’re aware Narrator and NVDA users that seek the latest release of Microsoft Edge based on Chromium may experience some difficulty when navigating and reading certain web content. Narrator, NVDA and the Edge teams are aware of these issues. Users of legacy Microsoft Edge will not be affected. NVAccess has released a NVDA 2019.3 that resolves the known issue with Edge.We’re looking into reports of the update process hanging for extended periods of time when attempting to install a new build.We’re investigating reports that the battery icon on the lock screen always shows close to empty, regardless of actual battery levels.We’re investigating reports of IIS configuration being set to default after taking a new build. You will need to back up your IIS configuration and restore it after the new build is installed successfully.Quickly switching between WSL distros using the File Explorer integration could cause a transient access error. We’ve identified the cause of this issue and are releasing a fix soon.We’re investigating reports that some Insiders are experiencing unexpected freezes and bugchecks with error DPC WATCHDOG VIOLATION in the last few builds. Read the full article

#MicrosoftWindowsInsider #Windows #Windows10

0 notes

just4programmers · 6 years ago

Text

How to use Windows 10's built-in OpenSSH to automatically SSH into a remote Linux machine

In working on getting Remote debugging with VS Code on Windows to a Raspberry Pi using .NET Core on ARM in my last post, I was looking for optimizations and realized that I was using plink/putty for my SSH tunnel. Putty is one of those tools that we (as developers) often take for granted, but ideally I could do stuff like this without installing yet another tool. Being able to use out of the box tools has a lot of value.

A friend pointed out this part where I'm using plink.exe to ssh into the remote Linux machine to launch the VS Debugger:

"pipeTransport": { "pipeCwd": "${workspaceFolder}", "pipeProgram": "${env:ChocolateyInstall}\\bin\\PLINK.EXE", "pipeArgs": [ "-pw", "raspberry", "[email protected]" ], "debuggerPath": "/home/pi/vsdbg/vsdbg" }

I could use Linux/bash that's built into Windows 10 for years now. As you may know, Windows 10 can run many Linuxes out of the box. If I have a Linux distro configured, I can call Linux commands locally from CMD or PowerShell. For example, here you see I have three Linuxes and one is the default. I can call "wsl" and any command line is passed in.

C:\Users\scott> wslconfig /l Windows Subsystem for Linux Distributions: Ubuntu-18.04 (Default) WLinux Debian C:\Users\scott> wsl ls ~/ forablog forablog.2 forablog.2.save forablog.pub myopenaps notreal notreal.pub test.txt

So theoretically I could "wsl ssh" and use that Linux's ssh, but again, requires setup and it's a little silly. Windows 10 now supports OpenSSL already!

Open an admin PowerShell to see if you have it installed. Here I have the client software installed but not the server.

C:\> Get-WindowsCapability -Online | ? Name -like 'OpenSSH*' Name : OpenSSH.Client~~~~0.0.1.0 State : Installed Name : OpenSSH.Server~~~~0.0.1.0 State : NotPresent

You can then add the client (or server) with this one-time command:

Add-WindowsCapability -Online -Name OpenSSH.Client~~~~0.0.1.0

You'll get all the standard OpenSSH stuff that one would want.

Let's say now that I want to be able to ssh (shoosh!) into a remote Linux machine using PGP keys rather than with a password. It's much more convenient and secure. I'll be ssh'ing with my Windows SSH into a remote Linux machine. You can see where ssh is installed:

C:\Users\scott>where ssh C:\Windows\System32\OpenSSH\ssh.exe

Level set - What are we doing and what are we trying to accomplish?

I want to be able to type "ssh pi@crowpi" from my Windows machine and automatically be logged in.

I will

Make a key on my Window machine. The FROM. I want to ssh FROM here TO the Linux machine.

Tell the Linux machine (by transferring it over) about the public piece of my key and add it to a specific user's allowed_keys.

PROFIT

Here's what I did. Note you can do this is several ways. You can gen the key on the Linux side and scp it over, you can use a custom key and give it a filename, you can use a password as you like. Just get the essence right.

Below, note that when the command line is C:\ I'm on Windows and when it's $ I'm on the remote Linux machine/Raspberry Pi.

gen the key on Windows with ssh-keygen

I ssh'ed over to Linux and note I'm prompted for a password, as expected.

I "ls" to see that I have a .ssh/ folder. Cool. You can see authorized_keys is in there, you may or may no have this file or folder. Make the ~/.ssh folder if you don't.

Exit out. I'm in Windows now.

Look closely here. I'm "scott" on Windows so my public key is in c:\users\scott\.ssh\id_rsa.pub. Yours could be in a file you named earlier, be conscious.

I'm type'ing (cat on Linux is type on Windows) that text file out and piping it into SSH where I login that remote machine with the user pi and I then cat (on the Linux side now) and append >> that text to the .ssh/authorized_keys folder. The ~ folder is implied but could be added if you like.

Now when I ssh pi@crowpi I should NOT be prompted for a password.

Here's the whole thing.

C:\Users\scott\Desktop> ssh-keygen Generating public/private rsa key pair. Enter file in which to save the key (C:\Users\scott/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in C:\Users\scott/.ssh/id_rsa. Your public key has been saved in C:\Users\scott/.ssh/id_rsa.pub. The key fingerprint is: SHA256:x2vJHHXwosSSzLHQWziyx4II+scott@IRONHEART The key's randomart image is: +---[RSA 2048]----+ | . .... . | |..+. .=+=. o | | .. | +----[SHA256]-----+ C:\Users\scott\Desktop> ssh pi@crowpi pi@crowpi's password: Linux crowpi 2018 armv7l pi@crowpi:~ $ ls .ssh/ authorized_keys id_rsa id_rsa.pub known_hosts pi@crowpi:~ $ exit logout Connection to crowpi closed. C:\Users\scott\Desktop> type C:\Users\scott\.ssh\id_rsa.pub | ssh pi@crowpi 'cat >> .ssh/authorized_keys' pi@crowpi's password: C:\Users\scott\Desktop> ssh pi@crowpi pi@crowpi: ~ $

Fab. At this point I could go BACK to my Windows' Visual Studio Code launch.json and simplify it to NOT use Plink/Putty and just use ssh and the ssh key management that's included with Windows.

"pipeTransport": { "pipeCwd": "${workspaceFolder}", "pipeProgram": "ssh", "pipeArgs": [ "[email protected]" ], "debuggerPath": "/home/pi/vsdbg/vsdbg" }

Cool!

NOTE: In my previous blog post some folks noted I am logging in as "root." That's an artifact of the way that .NET Core is accessing the GPIO pins. That won't be like that forever.

Thoughts? I hope this helps someone.

Sponsor: Your code is bad, but that’s ok thanks to Sentry’s full stack error monitoring that enables you to track and fix application errors in real time. Stop garbage code from becoming garbage fires.

#Scott Hanselman's Blog

0 notes

enterinit · 6 years ago

Text

Windows 10 Insider Preview Build 19013

Windows 10 Insider Preview Build 19013.

What’s new

More kaomoji As some of you may know, with Windows 10 version 1903, we updated our WIN+(Period) / WIN+(Semicolon) keyboard shortcut to not only include emoji, but to also now contain kaomoji and special characters. What are kaomoji? Basically, they’re faces with expressions you can make by combining various characters–for example, you might be familiar with the shruggie: ¯\_(ツ)_/¯ In any case, based on your feedback, in this build we’re updating our kaomoji list with a few more favorites, including: ヾ(⌐■_■)ノ♪ლ(��◡╹ლ)(⊙_◎)( ͡~ ͜ʖ ͡°)ಠ_ರೃ(∩^o^)⊃━☆/ᐠ｡ꞈ｡ᐟ\ And more! Enjoy (❁´◡`❁) Windows Subsystem for Linux (WSL) 2 will now release unused Linux memory back to your Windows machine Previously, your WSL 2 Virtual Machine’s (VM) memory would grow to meet the needs of your workflow, but would not shrink back down when the memory was no longer needed. With this change, as memory is no longer in use in the Linux VM, it will be freed back to Windows, which will shrink in memory size accordingly.

Other updates for Insiders

PowerToys v0.12 now available! We’ve just released our 0.12 release of PowerToys on GitHub. We’ve gotten tons of great feedback and suggestions from the community and want to directly say thank you to everyone. Your Phone app–Elevating the Phone screen feature by removing its dependency on Bluetooth connection Windows Insiders, we heard your feedback about the Phone screen feature’s dependency on Bluetooth Low Energy connectivity. To address your feedback, we partnered closely with Samsung to bring you a more streamlined experience across all Windows 10 PCs by removing the peripheral role dependency for Phone screen, which will expand the overall reach of this feature. Samsung Galaxy Note 10 was the first device to introduce this feature in August. After a positive response, we’ve recently enabled this feature across Samsung Galaxy Fold, S10, S10+, and S10e smartphones. You’ll need to update your supported Samsung devices with the recent software update that enables the ‘Link to Windows’ feature. To continue offering this experience to other smartphones, we’re expanding this feature support to Samsung Galaxy A30s, A50s, and A90 smartphones, and we’ll continue to add additional devices in the coming months. With the new experience rolling out, we’ll be removing the Bluetooth connectivity option, effective immediately. If you were previously enjoying Phone screen over Bluetooth and you have a phone model that doesn’t yet support Link to Windows, the Phone screen node will disappear automatically within the Your Phone app. We recommend that you unpair your devices by going to the Bluetooth settings on both your PC and your Android phone, so that you don’t have a connection that is no longer in use. Thank you for helping us refine the Phone screen experience so far! Phone screen requirements: Select Android phones running Android 9.0 or greaterPC running Windows 10 October 2018 Update or laterAndroid phone must be on and connected to the same network as the PCYou will need a supported device to use this feature: Samsung Galaxy FoldSamsung Galaxy Note 10/ Note 10+Samsung Galaxy S10/S10+/S10eSamsung Galaxy A30s/A50s/A90 Preview new DirectX 12 features In the latest 20H1 builds, you can preview new DirectX 12 features, including DirectX Raytracing tier 1.1, Mesh Shader, and Sampler Feedback.

General changes, improvements, and fixes

We fixed an issue resulting in frames being skipped, starting with Build 19002, when running games and videos fullscreen.We fixed an issue where initiating “Reset this PC” with the cloud download option wasn’t working when started from Windows RE.We fixed an issue resulting in preinstalled apps (like Calculator) and other UWP apps being missing from the Apps & Features page in Settings.We appreciate your patience while we worked on our sync engine. As of this build, wallpaper and theme syncing is now up and running again.We fixed an issue resulting in Wi-Fi unexpectedly resetting (turning off and back on) frequently in recent flights.We fixed an issue where Wi-Fi Settings might get stuck saying Connecting, even though the network flyout (correctly) indicated that you were Connected.We fixed an issue where an update being temporarily suspended would result in an 0xc19001e1 error being displayed in Windows Update history.We fixed an issue resulting in the “Open location” search result option not working if the search result was a folder.We fixed an issue where if you moved Cortana’s window to certain places on your screen, and then closed the window, the minimize animation wouldn’t go towards Cortana’s icon on the taskbar.We fixed an issue resulting in File Explorer not rendering correctly sometimes when using multiple monitors with different DPIs on the previous flight.We fixed an issue where you could get into a state where it wasn’t possible to set focus to File Explorer’s search box in order to type your query.We fixed an issue that could result in the app thumbnail disappearing when you right clicked it in Task View.We fixed an issue that could result in the Send Message button in certain notifications not being visible when using High Contrast White.We fixed an issue where the notification following WIN+Shift+S might have a blank space for the screenshot (rather than actually displaying the screenshot).We fixed an issue resulting in Resource Manager unexpectedly not showing any disk activity.We fixed an issue where, if you called SUBST with a path ending with a \ it would give a Path not found error.We fixed a memory leak with running apps that repeatedly sent calls to adjust gamma.Some of you have reached out about when trying to shutdown, seeing a message saying that an app named “G” was preventing shutdown. We investigated and found an issue where windows related to GDI+were only referenced as “G.” We’ve fixed this, so going forward, these will now have the name “GDI+ Window ()”, where will show the .exe name of the app using GDI+.We fixed an issue resulting in speechruntime.exe using an unexpectedly high amount of CPU on the previous flight.We fixed an issue resulting in Bluetooth devices potentially not reconnecting as expected after closing then reopening the device lid for certain devices.We fixed an issue resulting in the Surface Dial not scrolling in recent builds if you switched to something like zoom and then back to scrolling.Thank you Insiders who shared feedback about the 2-in-1 convertible tablet experience improvements. For the time being, we’re returning to the current experience in retail.We fixed an issue where Narrator would sometime report focus as the page instead of reporting the actual focused control within Chrome.We fixed an issue where Narrator would not automatically start reading the Narrator user guide webpage and the YouTube webpage.We corrected Narrator’s “Next Table” command so that it would work in Excel.We fixed an issue where the text cursor indicator was visible on top of the lock screen background picture.We fixed an issue where the text cursor indicator preview wasn’t displaying correctly in Settings when using dark theme.We fixed an issue where when using dark theme, the hardware keyboard text prediction candidate window was unreadable due to black text on a dark grey background.We fixed an issue that could result in the touch keyboard flickering when inputting emoji.We fixed an issue where English punctuations were outputted when using the Chinese Pinyin and Wubi IMEs, even if input mode was set to Chinese under the default IME settings. Thanks for your feedback.We’ve fixed an issue where the character width of alphanumeric characters when using the Traditional Chinese Bopomofo IME would change from half width to full width unexpectedly in some input fields. Thanks for reporting it!We’ve fixed an issue where after successfully updating to a new build, the Windows Update Settings page may have shown the same build needed to be installed.We’ve fixed an issue where Optional drivers were failing to install.

Known issues

BattlEye and Microsoft have found incompatibility issues due to changes in the operating system between some Insider Preview builds and certain versions of BattlEye anti-cheat software. To safeguard Insiders who might have these versions installed on their PC, we have applied a compatibility hold on these devices from being offered affected builds of Windows Insider Preview.We’ve heard that Settings still isn’t available outside of launching via the URI (ms-settings:) for some Insiders and are investigating.If you use remote desktop connection and the target PC is on this build, within about an hour (if not sooner), DWM may start crashing, and the session window will either go totally black, experience black flashes, or you may get signed out of the remote desktop session altogether. We appreciate your patience. Read the full article

#MicrosoftWindowsInsider #Windows #Windows10

0 notes

enterinit · 6 years ago

Text

Windows 10 Insider Preview Build 18995 released

Windows 10 Insider Preview Build 18995 released in Fast Ring.

What’s new

Windows Hello PIN in Safe mode Safe mode starts Windows in a basic state, using a limited set of files and drivers to help you troubleshoot problems on your PC. If a problem doesn’t happen in Safe mode, this means that default settings and basic device drivers aren’t causing the issue. With the latest flight, we’re taking another step forward in our Passwordless journey by adding Windows Hello PIN sign-in support to Safe mode, so that you no longer have rely on your password when troubleshooting your device. Try it out with the instructions below and let us know what you think! Set up Windows Hello in Settings > Accounts > Sign-in optionsBoot your device into Safe mode: Settings > Update and Security > RecoveryUnder Advanced startup select Restart nowAfter your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. You may be asked to enter your BitLocker recovery key.After your PC restarts, you’ll see a list of options. Select 4 or press F4 to start your PC in Safe Mode. You can also select 5 or press F5 to use Safe Mode with Networking. Sign in to your device with your Windows Hello PIN

Windows Subsystem for Linux (WSL) Improvements Fix an issue where DrvFs mounts stopped working after an operation was interrupted (e.g. ctrl-c) Fix handling of very large hvsocket messages Fix issue with interop when stdin is a file Fix service crash when unexpected network state is encountered Query the distro name from the interop server if the current process does not have the environment variable Fix issue with interop whe stdin is a file Update Linux kernel version to 4.19.72 Add ability to specify additional kernel command line parameters via .wslconfig kernelCommandLine = # Additional kernel command line arguments

Other updates for Insiders

Your Phone app–multiple new features rolling out to all users We’re pleased to announce that Link to Windows feature, which seamlessly connects your phone to your Windows 10 PC, is rolling out to Samsung Galaxy S10, S10+, S10e, S10 5G, and Fold devices in select global markets. With Link to Windows natively integrated into your device, it’s simple and convenient to send messages, manage notifications, sync photos, and mirror your phone on your PC. Phone screen, which allows you to access your Android phone’s apps right from your PC while using your keyboard and mouse or touch screen, is also rolling out to Samsung Galaxy S10, S10+, S10e, S10 5G, and Fold devices in select global markets. You can try out multi-touch gestures such as pinch to zoom, rotate, or swipe from your PC’s touchscreen while using Phone screen. If you have one of these devices, give it a try. This is a gradual rollout, so stay tuned for more to come on additional markets and devices. Battery level indicator & phone’s home screen wallpaper In addition to Phone screen and Link to Windows expansion, two additional features are rolling out to all users–battery indicator, which will provide quick access to your phone’s battery levels right in the app without needing to check your device, and Your Phone icon within the app, which will show your current static home screen wallpaper for a personal touch. All of these features are gradually rolling out to users, so they may take a few days to be available inside the Your Phone app. Please make sure you have the latest versions of Your Phone Companion and the Your Phone app. We value your feedback, so give it a try and let us know what you think. You can report any issues under Your Phone > Settings > Send feedback.

General changes, improvements, and fixes

We’ve made some improvements to address an issue resulting in some users frequently seeing a notification saying their account needed to be fixed, but the Settings page that opened showed no action was necessary.We fixed an issue resulting in some Insiders seeing error 0x80242016 when trying to upgrade.We fixed an issue where you might be prompted to fix something before you could update, but the dialog with what to fix didn’t display the issue that needed fixing.We fixed an issue resulting in the mouse cursor unexpectedly showing up in screenshots in recent builds.We fixed an issue impacting reliability of taking screenshots with WIN+Shift+S / Snip & Sketch.We fixed an issue where, if you started a snip from Snip & Sketch by pressing New and had “automatically copy to clipboard” enabled, the first initial copy might be blank.We fixed an issue where the Action Center might be visible in screenshots recently if you started them by pressing the Screen Snip quick action.We fixed an issue for multi-mon devices that could cause random crashes in UWP apps when switching focus between monitors.We fixed a high hitting DWM crash from the last few flights.We fixed an issue in recent flights that resulted in Skype unexpectedly closing the first time it was launched and you tried to sign in.We’ve updated our File Explorer context menu logic, so if you right-click on a .HEIC image file, you’ll now have the option to Print or Set as Desktop Background, as you can with other image file types.We fixed an issue where you might need to invoke the File Explorer context menu twice before the option to create a new Text Document would appear.We’ve made some improvements to help address an issue where search may appear blank.We fixed an issue resulting in some users seeing a 0x000007D1 when trying to print.We fixed an issue where the publisher information was unexpectedly blank for some apps in App Settings.We fixed an issue where the Windows Update information in the Settings header could be out of date.We fixed an issue where turning Bluetooth off then back on while a Bluetooth audio device was paired could take an unexpectedly long time.We fixed a crash when adding devices in Devices Settings.We fixed an issue where the ImmGetVirtualKey function wasn’t returning VK_PROCESSKEY even if an IME was enabled.We fixed an issue where pressing space to enter selected word with the Changjie IME when using the touch keyboard might not work.We fixed a ctfmon.exe crash when using the Japanese IME if reconversion was triggered with a partial selection.We fixed an issue where ctfmon.exe would crash if you attempted to use dictation from the touch keyboard in certain apps.We fixed an issue impacting Windows Ink Workspace reliability.We fixed an issue that could result in pinned websites icons in the taskbar sometimes unexpectedly switching from their actual icon to the default browser icon.We fixed an issue where calendar events created from the taskbar clock and calendar flyout wouldn’t have a default 15min reminder set.We fixed an issue where if the taskbar changed scale enough times while an IME was active, it would lead to the input indicator disappearing from the taskbar.We fixed an issue resulting in transparent/invisible app thumbnails in snap assist when snapping an app to the side when in tablet mode.We fixed an issue where Task View would display that the navigation pane of certain apps was expanded, even if it was actually collapsed.We’ve improved Magnifier performance when using touch.We’ve updated our logic, Magnifier UI will now show properly when alt-tabbing if Magnifier was minimized originally.We’ve fixed a few small issues with the Text cursor indicator page in Settings.We fixed an issue where, when using the text cursor indicator, you might unexpectedly see a focusable Eoaexperiences.exe app running in the taskbar.We’ve improved the reading of email when objects such as images are embedded in the message while using Narrator to remove the repeating of information while moving through the content.We fixed a bug in Narrator where the link sound did not play in certain scenarios.We fixed an issue with older drivers showing as available for download. If you continue to see older drivers in the Option updates section of Windows Update, please let us know.

Known issues

There has been an issue with older versions of anti-cheat software used with games where after updating to the latest 19H1 Insider Preview builds may cause PCs to experience crashes. We are working with partners on getting their software updated with a fix, and most games have released patches to prevent PCs from experiencing this issue. To minimize the chance of running into this issue, please make sure you are running the latest version of your games before attempting to update the operating system. We are also working with anti-cheat and game developers to resolve similar issues that may arise with the 20H1 Insider Preview builds and will work to minimize the likelihood of these issues in the future.Certain 2D apps (like Feedback Hub, Microsoft Store, 3D Viewer) are incorrectly being treated as having protected content within Windows Mixed Reality. During video capture, these 2D apps block their content from being recorded.When capturing a repro video while filing a bug via Feedback Hub in Windows Mixed Reality, you won’t be able to select Stop video, due to the protected content issue noted above. If you want to submit a repro video, you will need to wait 5 minutes for the recording to time out. If you’d like to file the bug without a repro video, you can close the Feedback Hub window to end the recording and resume filing your bug when you reopen the app in Feedback > Drafts.When using the Search bar in either Control Panel or File Explorer, the box becomes grey and prevents input. We’ve identified the cause, and we’re working on a fix for a future flight.Devices configured for dual scan (WSUS and Windows Update) for updates may not be offered new builds in the Fast ring. Selecting Check online for updates from Microsoft Update will scan for updates, but may return with the message, “Your device is up to date.” We’re working on a fix for a future flight.Some devices configured to Use HDR may experience a bluish tint on their HDR displays after using Night Light. We have identified the cause, and we are working on a fix for an upcoming build.Theme packs downloaded from the Microsoft Store fail to apply.Starting with the previous flight, some Insiders may find that Settings doesn’t launch from the button in Start, isn’t listed in the All apps list, or as a search result. If you are impacted, pressing WIN+R and inputting “ms-settings:” (without the quotes) will launch Settings if you need it.After successfully updating to a new build, the Windows Update Settings page may show the same build needs to install. You can verify the build was successfully installed by checking the build number in the corner of the screen or going to Win+R, typing winver, and confirming the build number. We have identified the cause of this issue, and we’re working on a fix for a future flight. Read the full article

#MicrosoftWindowsInsider #Windows #Windows10

0 notes

enterinit · 6 years ago

Text

Windows 10 Insider Preview Build 18980 released

Windows 10 Insider Preview Build 18980 released.

What’s new in Build 18980

An update on Cortana In response to feedback, we are executing a plan to make it easier for all Windows customers to use Cortana. As a first step, starting with today’s build, all Insiders worldwide will see the Cortana icon and the new app. In a future Cortana app update, customers will have the option to use Cortana if they speak a supported language, regardless of their OS display language. The new Cortana app currently supports English (United States)—because Cortana is service backed, we can and will continue to add new languages over the coming months outside the bounds of OS build updates. We expect to support the same set of regions and languages we currently support in retail by 20H1 launch. We will share more details of our language rollout plans as they progress and appreciate your patience during this transition period. Windows Subsystem for Linux (WSL) improvements In this build, we’ve added WSL2 support for ARM64 devices! We’ve also added the ability to set your distribution’s default user using the /etc/wsl.conf file. This release also contains multiple bug fixes, including a long-standing issue for legacy Windows symlinks (for example those in the user profile directory.)

Other updates for Insiders

Update on the Optional Features settings section improvements These changes are now available to all Insiders in Fast! Thanks to those who’ve already tried it out and shared feedback. If the experience is just rolling out to you now, we can’t wait to hear what you think! To quickly recap, amongst other things, we’ve added multi-select, search, and generally done work to make this section easier to use:

General changes, improvements, and fixes

There was an upgrade block on the previous flight in order to ensure that Insiders with certain versions of Outlook weren’t impacted by an issue in the build, which resulted in some insiders not finding the build when they checked for updates last week. This has been removed with this flight.We fixed a deadlock in netprofmsvc.dll that was occurring in recent builds. Symptoms for those impacted potentially included upgrade to the build freezing at 98%, or (if you were able to upgrade,) various aspects of the system unexpectedly freezing and becoming unresponsive.We’ve done some work to help address an issue where Outlook wouldn’t launch if you clicked an incoming email notification.We fixed an issue impacting touch keyboard reliability in recent builds.We fixed an issue impacting WIN+(Period) reliability.We’ve made the decision to return to the retail build version of the Korean IME while we work on addressing feedback Insiders shared with us about the updated IME experience.We fixed an issue impacting screen snipping reliability in the last few flights.We fixed an issue that could result in the login screen acrylic on the previous flight sometimes unexpectedly showing squares around UI elements.We fixed an issue that could result in certain app thumbnails going unexpectedly blank when you right-clicked them in Task View.We fixed an issue where removable devices were erroneously labeled as HDD in Task Manager’s performance tab. They will now be labeled Removable.As some Insiders have noticed, to give you the option to save disk space if needed, we’ve converted MS Paint and WordPad into Optional Features. You can choose to uninstall them or reinstall them via Optional Features in Settings.We’ve made some adjustments to help improve performance of the Apps & Features page in Settings when searching.We fixed an issue that could result in Settings crashing when updating your account picture.Ease of Access settings are no longer participating in settings synchronization (roaming). Accordingly, we have now removed the Ease of Access toggle in Settings > Accounts > Sync your settings.Magnifier reading now works better in applications like Google Chrome and Firefox.Magnifier reading no longer clicks the application when using the “Read from here” button or the Ctrl + Alt + Left Mouse Click keyboard shortcut.We fixed an issue where the text cursor indicator would not display when switching between left-to-right and right-to-left languages.We fixed an issue where the text cursor indicator would sometimes appear on read-only areas of the screen.We fixed an issue where the text cursor indicator would appear over the Start menu instead of staying in the Search edit box after typing text in the Search edit box.Improved the ability of reading the title of the window with Narrator while reading messages in Outlook.Improved auto-reading in Outlook with Narrator to make it more reliable.Made changes to more reliably read the message headers using Narrator while reading when using the Shift + Tab command while in Scan Mode.Improved the verbosity of Narrator when reading lists at verbosity level one.We fixed an issue where an edit field on some webpages was not getting properly updated on a configured braille display when editing the contents with Narrator.We fixed an issue where certain Local Experience Packs (LXPs) may revert to English.We fixed an issue resulting in certain Wi-Fi adapters not being able to load (code 10 error) after upgrading from a previous release of Windows and needing to be disabled and re-enabled for it to work.

Known issues

The Reset this PC cloud download option is not currently calculating the correct amount of space you need to free up if you do not have enough disk space to proceed. To work around this until the fix is available, free up an extra 5GB beyond what is prompted.The Reset this PC cloud download option is not currently working when specific optional features are installed. The process will begin, but an error will occur and roll back the changes. To work around this issue, remove the optional features before trying the cloud download option. We’ll let you know once this issue has been resolved. The optional features are: EMS and SAC Toolset for Windows 10, IrDA infrared, Print Management Console, RAS Connection Manager Administration Kit (CMAK), RIP Listener, all RSAT tools, Simple Network Management Protocol (SNMP), Windows Fax and Scan, Windows Storage Management, Wireless Display, and WI SNMP Provider.There has been an issue with older versions of anti-cheat software used with games where after updating to the latest 19H1 Insider Preview builds may cause PCs to experience crashes. We are working with partners on getting their software updated with a fix, and most games have released patches to prevent PCs from experiencing this issue. To minimize the chance of running into this issue, please make sure you are running the latest version of your games before attempting to update the operating system. We are also working with anti-cheat and game developers to resolve similar issues that may arise with the 20H1 Insider Preview builds and will work to minimize the likelihood of these issues in the future.Some Realtek SD card readers are not functioning properly. We are investigating the issue.We are looking into an issue where, after updating to this build, adding a new Language Pack reports successful installation but is not installed.Certain 2D apps (like Feedback Hub, Microsoft Store, 3D Viewer) are incorrectly being treated as having protected content within Windows Mixed Reality. During video capture, these 2D apps block their content from being recorded.When capturing a repro video while filing a bug via Feedback Hub in Windows Mixed Reality, you won’t be able to select Stop video, due to the protected content issue noted above. If you want to submit a repro video, you will need to wait 5 minutes for the recording to time out. If you’d like to file the bug without a repro video, you can close the Feedback Hub window to end the recording and resume filing your bug when you reopen the app in Feedback > Drafts. Read the full article

#MicrosoftWindowsInsider #Windows #Windows10

0 notes

enterinit · 6 years ago

Text

Windows 10 Insider Preview Build 18917 released

Windows 10 Insider Preview Build 18917 released. New download throttling options for Delivery Optimization We’ve heard from our users with very low connection speeds that setting download throttling as a percentage of available bandwidth isn’t providing enough relief in reducing the impact on their network. That’s why we’ve added a new option to throttle the bandwidth used by Delivery Optimization as an absolute value. You can set this separately for Foreground downloads (downloads that you initiate from Windows Store for example) or background downloads. This option already exists for IT Pros who use Group Policies or MDM policies to configure Delivery Optimization. In this build, we’ve made it easier to set via the settings page. You can access this option via Settings > Update & Security > Delivery Optimization > Advanced Options

Narrator improvements Data Table Reading Improvements: We’ve optimized the information you hear with Narrator when navigating a table using table navigation commands. Narrator now reads the header data first, followed by the cell data, followed by the row/column position for that cell. Additionally, Narrator only reads the headers when the headers have changed, so you can focus on the content of the cell. Windows Subsystem for Linux 2 WSL 2 is a new version of the architecture that powers the Windows Subsystem for Linux to run ELF64 Linux binaries on Windows. This new architecture, which uses a real Linux kernel, changes how these Linux binaries interact with Windows and your computer’s hardware, but still provides the same user experience as in WSL 1 (the current widely available version). WSL 2 delivers a much faster file system performance and full system call compatibility, which lets you run more applications like Docker!

Windows Ink Workspace Updates

As we mentioned last week, you may notice that Windows Ink Workspace has changed on your PC. That’s because we’re updating the Windows Ink Workspace experience and starting to roll it out to some Insiders. As part of this, Windows Ink Workspace now takes up less screen real estate, and we’re converging our whiteboarding experiences with a new direct link to our Microsoft Whiteboard app. We heard your feedback, and we’ve streamlined the Windows Ink Workspace for you. Stay tuned as we continue to evolve! Once the new experience arrives on your PC, please take a moment to try it out and share feedback via Feedback Hub under Desktop Environment > Windows Ink Workspace. If the Windows Ink Workspace icon isn’t visible in your taskbar, you can show it by right-clicking the taskbar and selecting “Show Windows Workspace Icon.” General changes, improvements, and fixes We fixed an issue where some users experienced a 0x8007000E error code while downloading the build due to high RAM consumption.We fixed an issue where users couldn’t use the desktop Features on Demand “add a feature” option.We fixed an issue where dragging the emoji and dictation panels was unexpectedly laggy.We’re in the process of rolling out a change in this build to address an issue where if the taskbar was set to autohide, launching the Start menu would first hide the taskbar before bringing up the Start menu.We fixed an issue resulting in the Start menu and taskbar going 100% transparent on secondary monitors or after projection.We’ve updated the new File Explorer search experience to now be dark when used in dark theme. Note – this experience is still in the process of rolling out. Thanks everyone who’s tried it so far and shared feedback, we’ll let you know when the rollout expands.We fixed an issue where Windows Security would crash if launched from Settings when using an Arabic display language.We fixed an issue where the audio service might hang on shutdown if spatial audio was turned on. Known Issues This update might fail the first time you try to download it with a 0xc0000409 error code.For Home editions, some devices might not see the “update installed” on the update history page.For Home editions, some devices might not be able to see the “download progress %” change on the Windows Update page.There has been an issue with older versions of anti-cheat software used with games where after updating to the latest 19H1 Insider Preview builds may cause PCs to experience crashes. We are working with partners on getting their software updated with a fix, and most games have released patches to prevent PCs from experiencing this issue. To minimize the chance of running into this issue, please make sure you are running the latest version of your games before attempting to update the operating system. We are also working with anti-cheat and game developers to resolve similar issues that may arise with the 20H1 Insider Preview builds and will work to minimize the likelihood of these issues in the future.Some Realtek SD card readers are not functioning properly. We are investigating the issue.Tamper Protection may be turned off in Windows Security after updating to this build. You can turn it back on.We are aware of an issue with the Bopomofo IME where the character width is suddenly changed to Full width from Half width and are investigating.We’re investigating an issue where some users are reporting that File Explorer search is rendering in an unexpectedly small area and clicking it results in a crash. Known issues for Developers If you install builds from the Fast ring and switch to either the Slow ring or the Release Preview ring, optional content such as enabling developer mode will fail. You will have to remain in the Fast ring to add/install/enable optional content. This is because optional content will only install on builds approved for specific rings. Read the full article

#Windows #Windows10 #WindowsClient #WindowsInsider

0 notes

enterinit · 6 years ago

Text

Windows 10 Insider Preview Build 18342 released

Windows 10 Insider Preview Build 18342 released. PCs with the following processor model numbers will not receieve this build due to an issue with Connected Standby: Intel64 Family 6 Model 142 and Intel64 Family 6 Model 158. To check to see if your processor falls into these two buckets: Step 1: Open Device Manager by right-clicking on the Start button on your taskbar. Step 2: Open up the Processors group and right-click on one of the processors listed (you will see multiple for each core of the processor in your PC). Step 3: Click properties and go to the Details tab. Step 4: Choose “Hardware Ids” in the property dropdown. This will give you the model number of your processor. Improving Gaming on Windows 10 Thanks to everyone who signed up to try out our new Windows gaming technology in Build 18334. With today’s new build (Build 18342), we have some fixes that we can’t wait to have folks try out: the game now runs correctly with parental controls enabled, and the install process is more stable (including a fix for the game being stuck in “Pending” instead of downloading). If you have already tried State of Decay and everything worked: we’d appreciate you uninstalling State of Decay and then trying the install again, to make sure everything still works. If you have already tried State of Decay and something didn’t work: please try again and see if your issue has been addressed. If not, it would help us a lot if you let us know using the Feedback Hub in Windows. Even if you already sent feedback on the issue before, it’s very helpful to know that it’s still happening on a new version of Windows. If you were not able to get a slot for State of Decay: we’ve opened up more slots now, so just go to the Xbox Insider hub and click Insider content to join. NOTE: we’re still limiting availability as we roll out, so we recommend joining right away. If you miss out this time, don’t worry, we’ll be adding more again soon! If you are trying State of Decay for the first time: just do the following: Install the Xbox Insider Hub app on the PC you’ll be flighting on. Sign in to the Xbox Insider Hub with your Gamertag. If you don’t have a Gamertag, see instructions. Select Insider Content in the upper left. Scroll to the bottom and select the Windows Gaming program (in the System section). Join the program. Follow the instructions in the previous post, skipping any steps you’ve already completed above. If you see any problems downloading or installing the game, or if important functionality like game saving isn’t working, please be sure to use the Feedback Hub to tell us. And thank you again for helping us find any issues! Linux Files inside of File Explorer We added the ability for users to access Linux files in a WSL distro from Windows. These files can be accessed through the command line, and also Windows apps, like File Explorer, VSCode, etc. can interact with these files. Access your files by navigating to \\wsl$\, or see a list of running distributions by navigating to \\wsl$. Other Updates for Insiders New Chrome Extension for Timeline: We’re pleased to announce an extension that collects activities from your Google Chrome browser and adds them to your Timeline in Windows. You can download the new Web Activity extension now from the Chrome Web Store. Just sign-in to the extension on your Chrome browser with your Microsoft account, visit a site in Chrome, then watch it appear on Timeline – and pick up where you left off. Your Chrome activities will also sync with Timeline on Android devices using the Microsoft Launcher app. Give the new extension a try and let us know what you think in the Feedback Hub. This is just one of many updates inspired by Insiders to make Timeline even better!

General changes, improvements, and fixes

The new tamper protection setting in the Windows Security app protects your device by helping to prevent bad actors from tampering with the most important security settings. The setting is now on by default for Insider Preview builds. We fixed an issue where Windows Sandbox would not start on localized builds. We’ve done some work to improve error reporting in Windows Sandbox. Now the error dialog includes the error code and a link to the Feedback Hub. We fixed an issue where Windows Sandbox was unexpectedly throwing an error due to referencing a deleted file under Windows.old. Windows Sandbox now captures hotkeys in full screen. Windows Sandbox now supports configuration files! These files allow users to configure some aspects of the sandbox, such as vGPU, networking and shared folders. We improved the capabilities of the wsl.exe command line interface, by adding new features such as importing and exporting distros and consolidating existing features from wslconfig.exe, such as listing distros and setting defaults. We fixed an issue where if the Magnifier was enabled and set to docked mode, machine would crash and reboot on sign-in creating a boot loop. We fixed an issue resulting in build unable to log into WinRE with an admin account in the last couple of flights. We fixed an issue where if you unpinned groups from Start, apps might end up thinking their tiles were still pinned. We fixed an issue resulting in being unable to re-arrange pinned folders in Start’s tile grid. We fixed an issue where the text explaining the Downloads section of Storage Sense had unexpected characters in it. We fixed an issue where Settings would sometimes crash when opening “Advanced Display Settings” from Display Settings. We fixed an issue where after changing an app’s audio endpoint, it might no longer follow master volume changes. We fixed an issue where it wasn’t possible to add a drive to the list of folders to exclude when setting up Enhanced Search in Settings. We fixed an issue with the Settings header at certain window sizes where long names might be truncated in the middle, rather than wrapping properly. We fixed an issue from the previous flight where right-clicking the desktop would bring up a light colored context menu in dark theme. We fixed an issue impacting Emoji Panel and Clipboard History reliability. We’ve made another fix to address reports of devices getting stuck with “Hibernating…” text on the screen on resume from hibernate. We fixed an issue that could cause Windows logon to forget the last logged on user, and instead would display the sign-in prompt for the default user from the list after dismissing the lock screen. We fixed an issue where an issue where some of the Real-Time Protection options for Malwarebytes Premium are not able to be turned on. We fixed an issue resulting in Internet Explorer’s menu bar not always appearing if enabled. We fixed an issue resulting in CDPUserSVC using an unexpectedly large amount of CPU for prolonged periods of time. We fixed an issue resulting in DWM crashing frequently for some Insiders on the previous flight. We fixed an issue resulting in certain games recently going into a black screen/not responding state if their resolution was lower than 1920*1080 and the game entered fullscreen. We fixed an issue resulting in certain games no longer rendering UI updates (appearing visually stuck) after using Alt + Tab to quickly switch away and back to the game. We fixed an issue resulting in significant video and audio lag when projecting videos from certain devices on recent builds. We fixed an issue where turning off Location from the Action Center might take multiple clicks to react. We fixed an issue resulting in single Unicode character insertion failing for IMEs, the touch keyboard, and the Emoji Panel in certain types of edit controls recently. We fixed an issue resulting in the left and right arrows on the touch keyboard inserting 4 and 6, respectively, in certain languages. We fixed an issue where newly installed apps might not show up in search results. We fixed an issue resulting in the Search pane becoming truncated if launched after rotating the device orientation from horizontal to vertical. We fixed a high impact issue resulting in a decrease in Start reliability in the last couple of flights. We fixed a recent issue where if you hid the search icon in the taskbar, a number of win32 apps would unexpectedly redraw when opening the Start menu. We fixed an issue that could result in unexpected flickering if you used pen or touch in certain win32 apps to launch a second instance of the app when in tablet mode. Have a need to create a file that starts with a dot? File Explorer will now allow you to rename a file to be something like “.gitignore” – previously there would be an error siting that you needed to provide a name. We fixed an issue resulting in File Explorer potentially hanging when trying to rename, delete, or move MKV files in the previous flight. We fixed an issue resulting in some Insiders not being able to open Cortana when in Tablet Mode. We fixed an issue resulting in the taskbar blinking if an AC adapter was attached when the device had less than 20% battery. We fixed an issue resulting in the taskbar disappearing for a second when dismissing Start/Cortana/Search on a secondary monitor. We’re updating the name of the “Windows Light” theme to now be “Windows (light)”. We fixed an issue where Cortana’s icon on secondary monitors wouldn’t update colors after switching between light and dark theme. We fixed an issue where when using light theme + small icons + a vertical taskbar orientation, text written on the taskbar would stay white and thus wouldn’t be readable. We fixed an issue that could result in open apps not being shown on the taskbar (but being visible in Alt + Tab). We fixed an issue resulting in greys having an unexpected slight pinkish/purple-ish tinge on some devices in recent flights. We fixed an issue that could result in DWM crashing after enabling high contrast. We fixed an issue in Ease of Access’s Cursor and pointer settings, mouse pointer size and color are now retained on upgrade. There is a remaining issue with mouse pointer showing white color instead of the selected color after signing out and signing back in. When using the Magnifier with larger pointers, it pans smoothly as the pointers change shape. We fixed an issue where navigation mode on Orbit display could not be changed. We fixed an issue where Narrator paused unexpectedly when reading through a PDF. We fixed an issue where users were unable to join or switch between Windows Insider rings. We fixed an issue where the Windows Security app may show an unknown status for the Virus & threat protection area, or not refresh properly.

Known issues

Launching games that use anti-cheat software may trigger a bugcheck (GSOD). Creative X-Fi sound cards are not functioning properly. We are partnering with Creative to resolve this issue. While we’ve done some work to improve night light reliability in this build, we’re continuing to investigate issues in this space. When performing Reset this PC and selecting Keep my files on a device that has Reserved Storage enabled the user will need to initiate an extra reboot to ensure Reserved Storage is working again properly. Some Realtek SD card readers are not functioning properly. We are investigating the issue. In Windows Sandbox, if you try to navigate to the Narrator settings, Settings app crashes. Mouse pointer color might be incorrectly switched to white after signing out and signing back in. We’re investigating reports of the Chinese version of multiple games not working.

Known issues for Developers

If you install any of the recent builds from the Fast ring and switch to the Slow ring – optional content such as enabling developer mode will fail. You will have to remain in the Fast ring to add/install/enable optional content. This is because optional content will only install on builds approved for specific rings. Read the full article

#Windows #Windows10 #WindowsClient #WindowsInsider

0 notes

enterinit · 6 years ago

Text

Known issues and fixes in Windows 10 Insider Preview Build 18277

Known issues and fixes in Windows 10 Insider Preview Build 18277. General changes, improvements, and fixes We fixed the issue causing WSL to not work in Build 18272. Thanks for your patience. We fixed an issue resulting in text not rendering on the screen if you had a large number of OTF fonts, or had OTF fonts that support the extended East Asian character set. We fixed a recent issue where Task View failed to show the + button under New Desktop after creating 2 Virtual Desktops. We fixed an issue resulting in Timeline crashing explorer.exe if you pressed ALT+F4 while it was visible. We fixed an issue significantly impacting Start menu reliability in recent builds when pinning, unpinning, or uninstalling apps. We fixed an issue where the expected context menu wouldn’t appear after right-clicking on a folder in File Explorer from a network location. Some Insiders may notice small differences in File Explorer over the coming flights – we’ll have more to share later about this later. We fixed an issue resulting in the home page of Settings having no visible scrollbar in recent flights if the window was small enough to need one. We’re updating the icon used to identify the Region page in Settings. We fixed an issue resulting in Settings crashing sometimes in recent flights when going to Sign-in Settings. We fixed an issue where Settings would crash if you were typing in the search box with the embedded handwriting panel and went to switch languages within the panel. We fixed an issue where playing videos might unexpectedly show a few frames in the wrong orientation when maximizing the window after changing the orientation of your screen. We fixed an issue impacting Emoji Panel reliability in recent flights. The touch keyboard’s feature to input a period after two quick taps on the spacebar was recently also accidentally enabled when typing with the hardware keyboard and has now been disabled. We’ve made some adjustments to improve the performance of WIN+Shift+S bringing up snipping. Some Insiders may notice changes to our snipping experiences, as we explore ideas for the future – we’ll have more details to share later. We fixed an issue that caused Far Manager to have a significant pause during a long running command like ‘dir’. We fixed an issue that caused Windows applications running from WSL through interop and applications using the *PseudoConsole APIs to redraw the top left corner excessively. We fixed an issue resulting in running “start .” from Command Prompt failing in the previous flight with an access denied error. We fixed an issue resulting in some Insiders experiencing bug checks (green screens) with the error KMODE_EXCEPTION_NOT_HANDLED on the previous flight. We fixed an issue where certain devices might hit a bug check (GSOD) when shutting down or when switching from a Microsoft account to a local admin account. We fixed an issue resulting in wuaueng.dll repeatedly crashing in the background for some Insiders in the last few flights. Known issues Some users will notice the update status cycling between Getting Things Ready, Downloading, and Installing. This is often accompanied with error 0x8024200d caused by a failed express package download. PDFs opened in Microsoft Edge may not display correctly (small, instead of using the entire space). We’re investigating a race condition resulting in blue screens if your PC is set up to dual boot. If you’re impacted the workaround is to disable dual boot for now, we’ll let you know when the fix flights. The hyperlink colors need to be refined in Dark Mode in Sticky Notes if the Insights are enabled. Settings page will crash after changing the account password or PIN, we recommend using the CTRL + ALT + DEL method to change the password Due to a merge conflict, the settings for enabling/disabling Dynamic Lock are missing from Sign-in Settings. We’re working on a fix, appreciate your patience. Known issues for Developers If you install any of the recent builds from the Fast ring and switch to the Slow ring – optional content such as enabling developer mode will fail. You will have to remain in the Fast ring to add/install/enable optional content. This is because optional content will only install on builds approved for specific rings. Read the full article

#Windows #Windows10 #WindowsClient #WindowsInsider

0 notes