#code cylinder

[swtechspecs]

Rebaxan Columni MSE-6-Series Repair Droid ("Mouse Droid")

Source: The Essential Guide to Droids (Del Rey, 1999)

[trooperst-3v3]

Was successful in sneaking Captain Peavey's code cylinders back into his uniforms before he realized they were missing.

Well, mostly successful.

While I got them back into his uniforms, I did not correctly guess the proper order in which he usually stores them.

I found that out today when he plugged one into a bridge console so he could access some files, and the viewscreen suddenly filled with shirtless refresher mirror selfies.

I hope he doesn't figure out it was me. Another perk of wearing armor all the time is that stormtrooper gloves don't leave fingerprints, so I have that going for me, at least.

[forlath]

In my defense I just figured they must do a lot of paperwork in the future...

[air-mechanical]

RIP Partagaz, who was fatally weakened by the unstoppable spread of the Rebel manifesto, an airborne antidote that ate away at him like poison.

He's a health care provider whose employer prevents him from having health insurance in the first place, let alone paying for any treatment.

Work for the Empire and fall sick? Make a mistake and break a bone? Find yourself exposed to a spreading virus that's on course to be a pandemic?

Bad Luck You.

[pileofsith]

Nameless Part Ten - Break Page 7/9

Not to worry, he has his little emotional support Grand Inquisitor rank badge.

Note: text in angle brackets is speech in Utapaun language + the capitalised ‘you’ indicates a formal/respectful form of address.

🡨 Previous Next 🡪

Part I Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 Part II Navigation: 1 / 2 / 3 Part III Navigation: 1 / 2 / 3 / 4 / 5 Part IV Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 Part V Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 Part VI Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 Part VII Navigation: 1 / 2 / 3 / 4 / 5 / 6 Part VIII Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Part IX Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 Part X Navigation: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9

[sheliesshattered]

My last post about the progress on my Batuu vest left off with me contemplating exterior pockets, looking to Bix Caleen as an example of a fitted vest in the Star Wars universe. I ended up talking myself out of any visible exterior pockets, with or without flaps, after looking at all those pictures of Bix. I've got enough other bits of visual interest going on with my outfit that I felt like exterior pockets just cluttered up the look.

Once I had decided against adding additional pockets, I was able to move on to the next step: finishing all the edges and attaching the lining to the exterior in preparation for getting the zipper in place. I turned under the armscyes of the lining and the exterior separately, both using a blue lace hem tape that I originally bought to go with this fabric back in 2016. Eventually I'll top-stitch them together with the hem tape sandwiched invisibly between the exterior and the lining, but for now they're finished enough to allow me to try the vest on without fraying the armscyes.

It took me awhile to think through all the steps for attaching the zipper, with all the asymmetry and overlapping and exterior and lining, while also not wanting the zipper to show from the outside at all. Eventually I figured out that I would need the underlap (left front) to be completely sewn together with the edges finished before I could attach the zipper to that side -- but I would need the overlap (right front) to not be sewn together yet, so that I could attach the zipper just to the lining.

With that finally figured out, I put the lining and the exterior together with right/finished sides together, lined up all the seams and notches carefully, then pinned the edges together from the left (underlap side) shoulder, down the center front of the underlap, and around the lower edge of the vest all the way around to the bottom corner of the center front on the overlapping right side of the vest.

After a lot of ironing to get all of that to lay flat when right side out, I was able to trim the center front edge of the overlap to be nice and clean and straight again. When I drafted the center front panels, I modified that right side to have an additional ~2" of width past where I wanted the zipper to be, specifically so there would be a built-in flap to cover over the zipper. Remember: no visible zippers in Star Wars!

Once I had the overlap panels of both the lining and the exterior all trued up, I marked the center front line on the lining side (in the below pic, the angled line going from lower left to upper right), laid half of the separating zipper onto the fabric so that the teeth were lined up with where the center front line met the lower edge of the vest, then measured from the outside edge of the zipper ribbon to the cut edge of the overlap panel. It was just about 7cm away from that edge, so I measured that distance all the way up (past the dashed line that marked the underbust elevation) and drew a nice crisp line with my chalk pen.

That gave me an easy line to follow when sewing the zipper to the inside/lining of the overlapping flap. Since I hadn't sewn the edge of that panel together yet, I was able to move the exterior layer out of the way and sew the zipper only to the lining, for now. I sewed one line of stitching just slightly in from the outside edge of the zipper ribbon, then did a second pass about halfway between the edge and the zipper teeth. It's on there nice and secure, but has a bit of room to separate from the fabric while it's being zipped, so it doesn't get fiddly.

After that, it was just a matter of pinning the other side of the zipper to the lower front corner of the underlap (this time on the exterior side of the fabric, where it faces the lining of the overlap), then try it on with the rest of my Batuu Bounding outfit and pin the underlap side of the zipper until I had the fit I wanted.

I sewed down that side to match the overlap panel side of the zipper, then tried everything on again to double-check the fit. It was a bit weird with the exterior of the overlap flap still unattached, but it fit well enough that I decided to sew the edges of that overlap flap from the lower corner up to the shoulder seam. The back of the neckline is still open, and the armscyes have been turned under but not attached to each other yet, so I can turn the whole thing right side out by pulling it through the back of the neck. With all that ironed and the zipper zipped up, the vest looks like this currently:

Folding back the outer edge of the overlap reveals the zipper. Because of all the overlapping and underlapping, the zipper is just top-stitched in place. It was way more mind-bending to figure out where everything needed to be placed to get this look, but way easier to actually sew on than, say, an invisible zipper set into a seam.

At this point I was able to try on the vest (with my Jyn Erso sweatshirt) and get a pretty good idea of the overall look. I still want to do a bunch of top-stitching both for accent and to help everything lay flat, but even with that I think I'm going to need something to keep the flap over the zipper from coming open.

I looked at a bunch of options for Star Wars-y looking buckles, settled on one I liked the best, then cut the basic size of them out of paper and taped five of them to the outside of the overlap just to get a basic idea of how it would look. I got Jack to weigh in on it too, and we both felt that the buckles were reducing the sleekness of the vest, and weirdly pushing it more towards an Imperial/First Order sort of look. My character isn't an out-and-out rebel, but she doesn't side with the First Order either. I pulled the taped on paper off again, and both Jack and I felt that that was the significantly better look.

But since I knew I still wanted some sort of closures to keep the flap down -- including one at the top left shoulder, that will hang open most of the time, along the lines of Han Solo's and Cassian Andor's shirts (and a bunch of others, this sort of overlap detail shows up frequently all throughout the franchise) and thus be visible where it hangs open.

I ended up finding these slightly unusual looking hooks-and-eyes that I think will provide a nice, nearly invisible look through the torso of the vest, but not look totally out of place on the flap edge that's hanging open. Bix's fitted coat has a similar closure of just barely visible, just slightly odd hooks and eyes, so I feel like I'm in good company there. They should arrive tomorrow, giving me enough time to hopefully get some of the top-stitching done before then.

That top-stitching is the next step, and one of the last things I need to do for this vest project. I want to top-stitch just inside all the finished edges, including the armscyes, and on each side of each of the seams, probably 2-3mm away from the edge and the seamline. That's going to involve getting everything lined up correctly and all the seam allowances lying flat inside the space between the exterior and the lining, but I think the effect will be totally worth it, both for the smoother fit and the subtle visual interest.

After that, I'll have some handsewing to do to invisibly anchor the zipper to the exterior of the overlap panel and to attach the hooks and eyes, once they arrive. The very last thing I'll do on this project is decide if I want a little stand-up half collar that ends somewhere on top of the shoulder, a bit like the one on Jyn Erso's vest.

I'm pretty sure I want a collar like that, the question is just if I need to lower the neckline in the back first, and then how far forward on the shoulder I should bring the collar. Once I've decided on that, I'll cut it out in two layers, lining and exterior, and sew the outside edges together. Then I'll be able to sew the lower edge of the exterior to the back of the neckline, and hand-sew the lining lower edge to fully encase all the raw edges. I did something similar with the Moment vest, and it comes together pretty quickly. I think I should be able to have the vest completely done by this time next week without much trouble. Hopefully.

Alongside working on my vest, I've been continuing to hand-sew the pleated panels onto Jack's jacket. In the tags on my last sewing update, I mentioned that I had about 5" still to go on the first panel. I was in the really annoying section in the middle of the sleeve where I really had to put my whole arm into the sleeve just to pass the needle through, and it was slow-going. I had to make myself push through that annoying section, rather than continue to put it off.

Eventually I worked my way all the way down to the cuff, cut off the excess from the pleated panel, turn under the edges of the lowest pleat, and hand-sew that into place. I am so pleased with how it turned out, but to keep Jack from making jokes about only having one sleeve done (and so that I wouldn't find myself with time to hand-sew and nothing ready to sew), I quickly pushed on to getting the second pleated strip started. I took a bunch of measurements from the finished sleeve and transferred them to the second sleeve, pinned the pleated panel into place, and had Jack try it on just to double-check the placement.

I was able to tear through the upper section of that second panel, between my increased speed and confidence in my method of hand-sewing this, the easy access through the neck side of the jacket, and a couple of long-ass work meetings where I was basically just there to listen in and take notes every now and then. As of posting this, I'm about halfway through with the second panel, and starting to get into that annoying section of the sleeve again.

The effect of the pleated panels on both sleeves is just so cool that I will definitely be getting photos of the jacket on Jack at some point, either on our Disneyland day or during a try-on before that. He's somewhat allergic to photos, but damn it I'm proud of how this looks, and I want to show it off. I've been calling it a 'sewist flex' from the very beginning -- look at what I can do, look at how cool and Star Wars-y it is -- and I'm really looking forward to sending this beauty out into the world in all its epicness.

And I think Jack feels similarly, based on how he's been talking about wearing this jacket all the time once it's done. His whole outfit together (this jacket, cream colored henley shirt with the buttons and bottonholes removed, mustard-y tan moto jeans, hiking boots) looks wonderfully casual Batuu Bound. The effect of the whole thing is Star Wars, but none of the individual pieces feel weird or costume-y. He might not wear those pieces together for anything other than going to Batuu, but each piece paired with something else looks pretty normal. So if Jack is able to get a lot of wear out of this modified jacket, all the better. I know I'll get that burst of sewist pride every time I see him wear it, lol.

[ningningkittie]

gym day today !!!

[moreaujeans]

irgehfhfhfj

[trawpius]

i think i'd feel better about being kinda fat if i was shaped like a sexy wooden barrel, instead of like rcdart

[fuck-customers]

(half rant half story)

I'm a physicist. I work for a company that helps develop car parts. Essentially, car companies come to us with ideas on what they want from a part or material, and we make/test the idea or help them make/test it. Usually this means talking to other scientists and engineers and experts and it's all fine. Sometimes this means talking to businesspeople and board execs and I hate them

A bit ago when AI was really taking off in the zeitgeist I went to a meeting to talk about some tweaks Car Company A wanted to make to their hydraulics- specifically the master cylinder, but it doesn't super matter. I thought I'd be talking to their engineers - it ends up being just me, their head supervisor (who was not a scientist/engineer) and one of their executives from a different area (also not a scientist/engineer). I'm the only one in the room who actually knows how a car works, and also the lowest-level employee, and also aware that these people will give feedback to my boss based on how I 'represent the company ' whilst I'm here.

I start to explain my way through how I can make some of the changes they want - trying to do so in a way they'll understand - when Head Supervisor cuts me off and starts talking about AI. I'm like "oh well AI is often integrated into the software for a car but we're talking hardware right now, so that's not something we really ca-"

"Can you add artificial intelligence to the hydraulics?"

"..sorry, what was that?"

"Can you add AI to the hydraulics system?"

can i fucking what mate "Sir, I'm sorry, I'm a little confused - what do you mean by adding AI to the hydraulics?"

"I just thought this stuff could run smoother if you added AI to it. Most things do"

The part of the car that moves when you push the acceleration pedal is metal and liquid my dude what are you talking about "You want me to .add AI...to the pistons? To the master cylinder?"

"Yeah exactly, if you add AI to the bit that makes the pistons work, it should work better, right?"

IT'S METAL PIPES it's metal pipes it's metal pipes "Sir, there isn't any software in that part of the car"

"I know, but it's artificial intelligence, I'm sure there's a way to add it"

im exploding you with my mind you cannot seriously be asking me to add AI to a section of car that has as much fucking code attached to it as a SOCK what do you MEAN. The most complicated part of this thing is a SPRING you can't be serious

He was seriously asking. I've met my fair share of idiots but I was sure he wasn't genuinely seriously asking that I add AI directly to a piston system, but he was. And not even in the like "oh if we implement a way for AI to control that part" kind of way, he just vaguely thought that AI would "make it better" WHAT THE FUCK DO YOU MEANNNNN I HAD TO SPEND 20 MINUTES OF MY HARD EARNED LIFE EXPLAINING THAT NEITHER I NOR ANYONE ELSE CAN ADD AI TO A GOD DAMNED FUCKING PISTON. "CAN YOU ADD AI TO THE HYDRAULICS" NO BUT EVEN WITHOUT IT THAT METAL PIPE IS MORE INTELLIGENT THAN YOU

Posted by admin Rodney.

[fionayao2008]

Tripod Turnstile Overview Tripod Turnstile, Swing Turnstile, as well as Flap Turnstile( RS Security Co., Ltd: www.szrssecurity.com) are modern control devices for pedestrian flows. They are used in position where the entrance as well as departure of individuals require to be regulated, such as clever communities, canteens, hotels, galleries, gyms, clubs, metros, stations, anchors, and so on location. Making use of Tripod Turnstile, Swing Turnstile, as well as Flap Turnstile can make the circulation of individuals organized. Tripod Turnstile, Swing Turnstile, Flap Turnstile are made use of in mix with smart cards, finger prints, barcodes and also various other recognition system tools to create an intelligent accessibility control network control system; they are used in mix with computers, access control, attendance, billing administration, ticket systems and also other software application to create a The intelligent Turnstile Gate thorough management system can understand features such as gain access to control, participation, consumption, ticketing, as well as current restricting. This Turnstile Gate monitoring system belongs to the "all-in-one card" and is mounted at flows such as neighborhoods, manufacturing facilities, smart structures, canteens, and so on. It can finish different monitoring features such as employee card traveling control, attendance at leave work and dishes, as well as dining. Tripod Turnstile system attributes Convenient and also rapid: review the card in and out with one swipe. Utilize the accredited IC card and wave it before the smart Tripod Turnstile reader to finish the Tripod Turnstile gate opening as well as fee recording work. The card reading is non-directional as well as the reading and also writing time is 0.1 secs, which is rapid and also hassle-free. Security and confidentiality: Use background or local verification, licensed issuance, as well as distinct identity, that is, the card can just be made use of in this system, and it is safe and also confidential. Reliability: Card superhigh frequency induction, reputable and stable, with the ability to judge as well as assume. Flexibility: The system can flexibly set entry and also departure control employees permissions, period control, cardholder legitimacy and also blacklist loss coverage, including cards and other features. Adaptability: Through permission, the customer card can be utilized for "one-card" management such as parking, presence, accessibility control, patrol, consumption, and so on, making it very easy to recognize several uses of one card. Simplicity: Easy to set up, easy to connect, the software program has a Chinese user interface and also is simple to run. Tripod Turnstile, Swing Turnstile, and Flap Turnstile( RS Security Co., Ltd: www.szrssecurity.com) are contemporary control gadgets for pedestrian flows. The use of Tripod Turnstile, Swing Turnstile, and also Flap Turnstile can make the circulation of people orderly. Utilize the licensed IC card and also wave it in front of the wise Tripod Turnstile reader to complete the Tripod Turnstile gate opening and also charge recording work.

[trooperst-3v3]

Replaced the door on Farmer Jovan's barn today. The hinges were rusty and the livestock kept knocking them loose and getting out.

He said he appreciated the effort, but I could have just replaced it with a new wooden door instead. The metal sliding door with code cylinders was a bit. . .much.

I told him not to worry about it! I don't mind going above and beyond for a friend! Besides, I was bored and I had the spare parts leftover from the last time I worked on the Finalizer. I'll paint it red like the rest of the barn tomorrow. It'll be great.

[makereadgrow]

Why we don't shop at Hobby Lobby

At the end of my post on places to go when Joann finally closes its not so hallowed doors I mentioned "don't go to Hobby Lobby" and it has evoked some questions.

Hobby Lobby is a craft store beloved by many, with a cult like following. I have personally had a member of my extended family call me to tell me that they hoped my house was looted by protestors when I made a joke about Hobby Lobby on facebook (this was May 2020 so you can guess why they didn't like the protestors).

Hobby Lobby was founded by Steve Green and it has a long and sordid history.

Beyond the Bastards did a whole episode on Mr. Green and his Christian supremacy! https://www.youtube.com/watch?v=EeYaQQZTBPs&pp=ygUOI2J0Yl9rbm93bGVkZ2U%3D

The Mary Sue also has a write up of all the goods. https://www.themarysue.com/the-hobby-lobby-controversy-explained/

In 2009 Hobby Lobby and the Green's got caught smuggling antiquities to stock The Museum of the Bible

https://www.npr.org/2018/06/28/623537440/hobby-lobbys-illegal-antiquities-shed-light-on-a-lost-looted-ancient-city-in-ira

and in 2014 we have Burwell v. Hobby Lobby - which is when Hobby Lobby sued the government over providing birth control to employees. Setting a precedent that companies can have religious convictions.

https://www.plannedparenthoodaction.org/issues/birth-control/burwell-v-hobby-lobby

And to top it all off they think bar codes are the mark of the beast and forced their employees to continue to work without sick leave through the worst of the early Covid-19 pandemic.

[air-mechanical]

The scanner that monitored the main entry of the military detention center on Coruscant accessed the coded information contained in the insignia squares affixed to the left breast of Krennic's tunic, and with a chirp of approval the thick door pocketed itself into the partition, allowing him to pass.

I'm finally reading Catalyst and what, the rank plaque badges contain coded information? I didn't know that. I love that. I'm waay behind on reading/watching Star Wars content, and haven't seen this mentioned anywhere else. Does anyone else have this? Or is it just Catalyst Krennic?

[kathaynesart]

Okay, so I was absolutely giddy reading the newest post when I thought about something.

I remember in a previous explanation that each brother has their way of communication with Leo. Ninja mind meld with Raph, Donnies big book of codes, and pretty much just wingin' it with Mikey.

With that being said, it makes sense why Mikey was confused here, since Donnie was using, what could be considered complicated codes.

Anyways, I loved it, can't wait for more, and tysm for this amazing series!!!

Hahaha! This is very true in some regards and I'm glad you picked up on it! There will always be a bit of a communication barrier between Donnie and his other brothers when he's not taking the time to give proper context.

I'm sure though Donnie would argue that "Mach Stem Barrier" is not code at all and if his brother knew ANYTHING about bombs then there would have been no confusion.

In which case *puts on nerd glasses* I think a little lesson on bombs is in order (because if I had to study all this stuff for this comic then you get to suffer along with me).

BOMB LESSON

A Mach Stem is basically the huge shockwave of pressure that comes from the blast of a bomb when it merges with its own blast being reflected back up by the ground. It's basically the thing that causes that huge slice of pressure which levels everything around ground zero. This strength of this wave is normally about twice the pressure of the actual blast itself, doubling its destructive power.

It's so powerful you can actually see it with the naked eye: VIDEO

To counteract this and reduce collateral damage Donnie created the shield we see which he calls the "Mach Stem Barrier." It acts as a giant cylinder that contains all that pressure and heat and then releases it high up into the stratosphere, protecting the surrounding area from harm. Luckily the blast is radiation free so no fear of fallout. The attacks works more like a pressure oven, the heat inside reaching up to temperatures of 200 million degrees Fahrenheit (about 100 million degrees Celsius), or about four to five times the temperature at the center of the sun, incinerating anything within its confines, even Krang tech. Crazy stuff and all backed by actual science, just as Donnie would have it! ...Now if Mikey would just get with the program!

[whencyclopedia]

A Gallery of Mesopotamian Religion

Mesopotamian religion was informed by the belief that humans were co-workers with the gods in maintaining the order created at the beginning of time and so religious expression was integral to daily life in ancient Mesopotamia in how they chose to perform tasks on the job, behave toward others, and honor those gods.

Among the most common displays of respect for the divine was Mesopotamian art and architecture in which the deity's depiction emphasized some defining characteristic. The terracotta plaque, Ishtar Standing on a Lion, for example, shows the goddess armed above a subdued lion, symbolizing her role as a powerful war deity. The stamp-seal of Gula, goddess of healing, depicts her in the presence of one of her dogs – also associated with healing – welcoming a supplicant, in keeping with her primary role.

The gods of ancient Mesopotamia were not only venerated through formal artwork like plaques or reliefs, however, but through everyday objects – amulets, charms, figurines – one would carry or keep around the home to court a certain deity's favor or ward off the threats from evil spirits or demonic energies. This was also true of temples where foundation figures, in the form of the king who commissioned the building, were ritually buried to mark off the sacred from the common areas.

Since the world was understood as alive with spiritual energies – positive and negative – it was considered prudent to take measures to attract the bright energies and defend against the dark through sacred objects used to ward off bad luck, ghosts, the schemes of sorcerers, and the physical maladies that were recognized as either a spiritual attack or the result of one's own sins and a god's displeasure.

The following gallery presents a sampling of the stele, amulets, statuary, figurines, and temples, which developed from Mesopotamian religious belief. Among these are some of the most famous works from the region such as the Code of Hammurabi, the Mask of Warka, the Warka Vase, and the Nimrud Dogs along with lesser-known pieces including the votive figures, stamp seals, cylinder seals, spells, and reliefs.

Continue reading...