#Demodulation
Explore tagged Tumblr posts
emilyratajkowski164395 · 6 months ago
Text
Tumblr media
Network science provides powerful tools for analyzing and optimizing complex systems, including advanced technologies such as robust fiber-optic microphones. In particular, a modified dual-wavelength demodulation algorithm for low-frequency sound detection can greatly benefit from network science principles, enabling precise, high-quality signal capture in challenging environments.
Network Science in Signal Transmission By applying network science concepts, the fiber-optic microphone achieves optimal signal flow and coordination across various nodes in a sensor network. Each microphone operates as an individual node, collecting data and relaying it within a larger network structure, thus enhancing signal reliability and reducing the risk of data loss.
Enhanced Signal Clarity through Dual-Wavelength Demodulation The modified dual-wavelength demodulation algorithm uses two distinct wavelengths to differentiate low-frequency sounds from background noise. This dual-wavelength approach improves clarity, especially critical in low-frequency detection, where interference and signal degradation are common challenges.
High Sensitivity and Noise Reduction By leveraging the network structure, the microphone can dynamically adjust its sensitivity to surrounding acoustic environments. Neighboring nodes share contextual information, allowing the microphone to filter out irrelevant noise and focus on the target low-frequency signals.
Resilience in Challenging Environments The networked system of fiber-optic microphones can adapt to variations in environmental factors, such as temperature and pressure changes, without compromising signal quality. This resilience is made possible by network algorithms that distribute signal load and prevent node failure from impacting overall system performance.
Robust fiber-optic microphone with modified dual-wavelength demodulation algorithm for low-frequency sound detection
International Conference on Network Science and Graph Analytics
Website : https://networkscience-conferences.researchw.com/
0 notes
addohaislam2000 · 1 month ago
Text
Radio frequency modulator, rf modulator, rf balanced demodulators, balanced
700MHz-850MHz 1.7GHz-1.9GHz 150Mbp MultiConnect®rCell 100 Series Cellular Router
1 note · View note
dnld2rrera · 8 months ago
Text
https://www.futureelectronics.com/p/semiconductors--wireless-rf--rf-modules-solutions--gps/max-8q-0-u-blox-3122418
RF Modules, Digital rf modulator, Proprietary RF Module, Radio frequency module
MAX-8 Series 3.6 V u-blox 8 GNSS TCXO ROM Green 9.7x10.1 mm LCC Module
1 note · View note
digilogic-system · 10 months ago
Text
Tumblr media
DVB-S2 Demodulator from Digilogic Systems
Digilogic Systems DVB-S2 Demodulator is a high-level satellite communication product compatible with complex modulation techniques and flexible for various frame categories. It is used in broadcasting services and space exploration.
The software features spectrum inversion support and automatic gain control for high-quality results. As a low-power device with fast synchronization capabilities, it is a promising component for advanced FPGAs, including the KU060 series, which are future-oriented for satellite communication systems. It is a reliable component for satellite communication systems.
If you would like more information (or) to request a quote, please feel free to contact us. Phone: Hyderabad: (+91) 40 4547 4601 Bengaluru: (+91) 80 4975 6034 Website: https://www.digilogicsystems.com/ Email: [email protected]
0 notes
lry2ylesss · 2 years ago
Text
Wireless rf frequency, digital audio mixer circuit programming, RFID capability
NT3H2111 Series 3.6 V 13.56 MHz Surface Mount RFID Transponder - XQFN-8
1 note · View note
soapdispensersalesman · 2 years ago
Text
0 notes
dat-physics-gal · 2 years ago
Text
A leap of faith and physics
We thought for a civilization to form, one needed liquid water, a stable planet with a hot core, and tardium crystals. Apparently, this is not so.
Because we just received a vibromessage over the tachyon network from an unknown source.
Which in itself would not be too unusual. Plenty of newly realized civilizations figure out how to configure tardium to send tachyon messages across isospace. Hoping someone will answer. We always do. It always takes some time to go from simple repeating messages to understanding one another. Most civilizations don't come up with the galactic standard modulation on their own. Nor do we know their form of communication all that well, language, culture, all of that.
First contact is always a lengthy affair, until the new species is integrated into the intergalactic community. Then follows the exchange of knowledge and culture, the setting up of historical archives and sharing of starcharts. Since light travels only at luxionic speed, the charts provide a valuable look at the past. Once the new civilization has been caught up to date, things tend to settle. Updates are fewer and far in between, and culture tends to somewhat homogenize. Not completely, of course, as everyone has different living circumstances, but with all the exchange between us, some settling is bound to happen.
But we know where tardium reserves are, have felt the reverb of our scans, we know where civilizations could potentially pop up. The message we received was unusual not because its source was unknown, but because it came from a sector without any sufficient tardium deposits.
That... shouldn't even be possible!
The signal is also a bit noisy. Strange. Usually, the bigger the tardium array, the more self-stabilization should occurr. And for interstellar communication, you tend to need quite large arrays. So then why was there so much noise?
It was clearly a signal, and according to the triangulators, it came from the outer third of a dark spiral galaxy. We call them that, since they were never really observed, at least not with any isocartography. We only know they're there due to shared star charts. No idea what's going on with them at the current isotime. We can't know, without any tardium resonance to pick up.
Anyway, of course we answered. Their signal had been prime numbers, if we demodulated it correctly, followed by things we couldn't really make sense of. It was standard practice to begin communications with mathematics, and fundamental harmonics. It's strange that they did that right away, but not unheard of. We sent back primes, and then a couple of playful harmonics. Music. What we received back was weird, because we thought it was music, but it wasn't.
It turned out to be a starchart, and not just any kind. Pulsars. We sent back a chart of their galaxy, as reconstructed from several older starcharts. Then, we waited for their answer. And waited. And waited. An entire solar cycle (of our species) later, we finally got another answer.
And it just would not stop. We recognized it was a series of images, or rather, rapid successions of images, together with harmonics on a different band as well. This was video! The footage depicted a bipedal species, with symbolics next to different features. The images cycled through different body parts, with different descryptions. We had a really hard time catching and saving all the data, a task which had to be offloaded to the communal computation grid, as our own planet simply did not have the capacity to do it alone. This should have tipped us off to what we were going to be dealing with, but it didn't.
We continued, almost business as usual, just a fair bit faster. Then objects were being shown, often together with the bipedals, and their corresponding glyphics were depicted right next to them. Also, each image was accompanied by a sound file. They really made learning their language easy for us. We learned that they called themselves Humans, and their home was Earth, a planet orbiting a yellow star. They were a surface dwelling species! Those are pretty rare, as most can not survive the exposure to open space for some reason. We then sent back images and glyphics of our own, matching them in their intent. We sent images of life forms, images of our own body parts, images of objects and always accompanied by isostandard glyphics.
Usually, once communication has come to a basic understanding, the exchange of culture would begin.
But the Humans had started out with primes and starcharts, so of course, their next communication wasn't about culture. We... honestly didn't know what exactly it was, for a while. Until some of the mathematicians from across the network found patterns. They were sharing mathematics with us!
Eager to help, we sent back entire databases full of insights. They requested more soon. So we sent more. And more. And more. We wondered how they could even store all that we sent them. We asked. They sent back something we didn't understand. We hoped the mathematicians could figure it out, but nope.
Eventually, we sent steam engine configurations, as well as the corresponding heating and shunting tardion-arrays used to power them. They sent back their own designs for steam engines. And other engines that seemed similar, but shoudn't work with steam. The machine configurations, piston layouts and such, were fairly primitive. As was to be expected from a new species. But they never sent us schematics of their heating or shunting arrays. When we asked how they kept things cool without shunting arrays, they sent back another steam engine. But, when we called it that, they corrected us. What they had shown us was a heat pump. They used the opposite effect, instead of creating movement from a temperature difference, they created a temperature difference from movement. We asked them why they wouldn't just use shunting arrays. They asked what those were.
And this is how we found out why they were in dark space. Why their signal was so noisy. And why they had never depicted heating or shunting arrays in their schematics.
They had practically no tardium. They simply did not have enough of it to make arrays, as we thought all civilizations do. The largest piece of tardium they had was the centerpiece of a gigantic machine. It was about the size of a human "nail", which is a vestigial claw originally used for superior grip on one of the native plant species of their planet.
We did not know how to respond. We could not comprehend how a civilization could form without tardium crystals. They asked us if we knew where more could be found, preferably near them. We didn't understand what they meant. Then they asked us how to locate reserves. We gave them the modulations that we use to scan for the crystals' tachyon resonance.
They thanked us, and ceased their questions. Then, communication became choppy. Only occasionally would we receive an exchange of culture. Their questions about mathematics and tardium crystals ceased.
---------------------
When we first received back an answer from the deep space tachyon dish, we were extatic. And shocked. And kind of in disbelief. Nobody had really known if it would work. Still, everyone in the control room agreed that we should make sure it was really a signal, before we dropped that bombshell to the public.
We focused a couple more dyson collectors onto the dish, and changed the signal. Instead of primes and harmonics, this time, we encoded the pulsar chart, multiple times, in every encoding we could think of, and sent them all.
Only a few hours later, we received another signal from the previous location. The encoding was our own, easily recognized. With shaky hands, i pressed the 'open image file' button.
When i was greeted by a picture of the Milky Way, everyone in the room lost their collective shit.
"Holy Fuck!" "Oh my god." Someone fainted. Multiple people cried. Nobody minded any of that.
~~~
The prime administrator creased her brow. The direct line was ringing. This better be important. "Hello? Prime administrator here." From the other end, she could hear someone suppressing tears, and whimpering: "Tachyon dish project operator here. We... we."
"Everything ok over there?", she asked. What could possibly have happened that had the scientist crying? Was there an accident with the dyson swarm or something? Did people die? No, she trusted the operator of that experiment to not call unless it mattered to the entire human race.
A wet chuckle. "Better than ok. Maam? We... We're not alone."
Not alone? What does that...? Oh. OH! oh
"Are.. you sure?" Dammit. Now even her own voice was shaking.
"We sent a pulsar chart and got a beautiful image of the Milky Way back, in the same image file type. Pretty sure at this point."
~~~
The following year was downright insane. The mere confirmation that we weren't alone in the universe spurred us all on. Artists did their best to show all sides of us, scientists got together to determine what questions we should ask, even the long obsolete military awakened from its slumber, churning out tactical analyses of possible tachyon based weaponry, and how to defend against it.
Some people were panicking, others in denial, but most relished the opportunities that might open up.
Policies were made, on how to handle aliens that would come to the solar system. Tachyon mechanics, an until now unproven theory, made leaps and bounds, scientists working as hard as they could to understand it better.
The dyson collectors were turned to multiple new research projects, powering large machines that channeled vibrations into the tiny crystals we had found to pick up on tachyon vibrations. The largest one that we had discovered while asteroid mining was still in the communication dish, but the smaller shrapnel, a couple millimeters in size at the most, were being utilized.
Eventually, after a year was up, communications resumed. The linguists sent data, and worked closely with the astronomers that had made the initial transmissions. We also received back data, and the scientific community devoured every piece of information. We learned their language as fast as we could.
But our requests for the sharing of scientific knowledge appeared to fall on deaf ears. Whenever we sent natural constants, or physical laws, we got nothing back. Well, almost. Our prodding did yield one answer: How to locate the crystals. Which were apparently common? Though our scans painted a different picture. We did have some scattered about the asteroid belt, yes. But the largest one we detected was only 3cm in diameter. A little bigger than the one in the communication dish, sure, but not that much.
We came to accept this, figuring that maybe there was some kind of prime directive that forbade the sharing of further technology. Actually, perhaps we leaned a bit too far into our Star Trek analogy. Because most of us would not get it out of our heads to try to build a warp drive. Well, not really a spacetime bending drive, but something that could go faster than light. Because, obviously, thanks to our discovery, we now knew that while the speed of light may be finite, the speed of information was not.
-----------------------------
After ten cycles of cultural exchange, the humans sent a request for isocoordinates of the nearest known civilization to their own. This request kind of drowned in the noise, we didn't really think about it much, we just transmitted our coordinates. Turns out, the nearest ones were us, in what the Humans call the Andromeda Galaxy.
Shortly after the request, they went totally vibrosilent. We tried and tried to contact them, but to no avail. This, while tragic, was a reality of civilization, though. Extinction events could always happen. Sometimes the affected civilization would realize in advance and send a couple warnings, but nobody could help them from afar, of course. So that's what we figured happened to Humanity. Maybe their sun blew up, or they got knocked away from it by a passing object, anything could have happened.
Many cycles passed. I had aged, my once young and springy exoskeleton now wobbly and soft, though my mind was still sharp enough to crew a communications array.
None of us were prepared for the schockwave resonating through our sensor grids. Multiple arrays straight up shattered. Luckily, as big as they were, there was nobody close to them, so no deaths. What the rest of them picked up though made no sense. We could determine there was a pulse, but no normal communication had that level of power, nor resonance.
Then, half a planetary rotation later, there was a new luminance in the sky. We were about to renew our arrays and update our starchart, when the light source moved. Toward the planet.
What?
And then, my assigned communications array resonated.
"This is the Human vessel Enterprise, calling anyone on the planet. Can you read us?" the crystal sang in choppy English, the language of the Humans. The ones we thought were extinct.
I scuttled to my post at the resonator, tuning it to reply:
"This is communications, we read you, but i don't understand? We are recovering from an unprecedented resonance pulse that shattered multiple arrays, sorry if the modulation is a bit off."
The answer was swift: "Sorry about that, our engines are a bit out of tune at this point. That pulse might have been us. Glad to hear you all down there, is anyone injured?"
"Your engines? And uh. No, nobody injured."
"Yes our engines, again, we apologize for that. But glad to know everyone is alright.
Requesting permission to land on the surface."
This was a momentous occasion, which i didn't realize until later on. The entire tachyon network would eventually refer to this exact communication as a reference time. This exact moment would come to be known as 0:0 PFJ
0 Cycles and 0 rotations Past First Jump.
The only thing i remember is absently giving permission, not quite understanding what exactly they were requesting here. If i had, i would have convened with the councils beforehand.
Then, the cave began to shake. It wasn't coming from any of the arrays. It was coming from the surface.
~~~
They. They were here. The Humans were here. On the surface. Of. Of our planet. What? How?!
Most importantly, why?!
Then i remembered the stories about their exploration of the surface of their own planet. How they had sent people to their poles, despite their biology not being fit to survive there. And several did die! How they climed mountains. Made pressurized vessels to dive below the surface of their open ocean. We asked them why. They told us.
I realized at that moment, not how they were here. But why.
"Because we could, and no human had been there before," they had answered back then.
431 notes · View notes
utopicwork · 2 months ago
Text
"This library allows you to communicate small amounts of data between air-gapped devices using sound. It implements a simple FSK-based transmission protocol that can be easily integrated in various projects. The bandwidth rate is between 8-16 bytes/sec depending on the protocol parameters. Error correction codes (ECC) are used to improve demodulation robustness."
20 notes · View notes
toffeethief · 1 year ago
Text
Usurp Synapse - Modulator/Demodulator
15 notes · View notes
usafphantom2 · 2 years ago
Text
Tumblr media Tumblr media Tumblr media Tumblr media
Communication between the SR 71 and the KC 135Q had to be secure. The enemy would listen in vain, trying to find their location and their next rendezvous with a tanker. The RSO had a Modulator/ demodulator modem control panel. He used a five-digit code that he punched to secure communications. The KC 135Q, which is equipped with the same UHF radio and has the correct mission code and address number, could receive the SR 71 range as well. There was an interconnected phone that the crewmembers of both the SR 71 and the KC 135Q could talk to each other during this refueling time.
The tankers were always a welcome sight to the SR 71 crew. After a while, the cockpit would get a little warm. After refueling, the cockpit was noticeably cooler. Tankers could give life-saving information to the crewmembers by being able to look at the airplane and noticing if something was Wrong (Engine on fire, yes, that happened) with the airplane. Thank you to all KC 135 pilots and crewmembers for helping keep the SR 71 going all those years.
Written by Linda Sheffield Miller
@Habubrats71 viaX
Tumblr media
23 notes · View notes
styxnbonez · 5 months ago
Note
✨- How did you come up with the OC’s name?
For Hexadecimal and Modem, I'm quite curious :33
waaah tyyy...
ok so Usually names for my ocs come from behindthename (my personal lord and savior.....) but for Days before officially making them i had the word 'hexadecimal' stuck in my head as a name cuz i loveee weird words as names <33 then i was like "ok well obviously the other half of the duo has to half an equally as wacky name" and . tbh idk where modem came from ? i think i literally googled "long words" and "modulator demodulator" was rlly good :]] i Have since shortened it back down to modem (that was originally a nickname) but the essence is there.... and i think the names are silly !! i like em :]]
2 notes · View notes
educationtech · 7 months ago
Text
Impact of Digital Signal Processing in Electrical Engineering - Arya College
Arya College of Engineering & I.T is the best college of Jaipur, Digital SignalProcessing (DSP) has become a cornerstone of modern electrical engineering, influenced a wide range of applications and driven significant technological advancements. This comprehensive overview will explore the impact of DSP in electrical engineering, highlighting its applications, benefits, and emerging trends.
Understanding Digital Signal Processing
Definition and Fundamentals
Digital Signal Processing involves the manipulation of signals that have been converted into a digital format. This process typically includes sampling, quantization, and various mathematical operations to analyze and modify the signals. The primary goal of DSP is to enhance the quality and functionality of signals, making them more suitable for various applications.
Key components of DSP include:
Analog-to-Digital Conversion (ADC): This process converts analog signals into digital form, allowing for digital manipulation.
Digital Filters: These algorithms are used to enhance or suppress certain aspects of a signal, such as noise reduction or frequency shaping.
Fourier Transform: A mathematical technique that transforms signals from the time domain to the frequency domain, enabling frequency analysis.
Importance of DSP in Electrical Engineering
DSP has revolutionized the way engineers approach signal processing, offering numerous advantages over traditional analog methods:
Precision and Accuracy: Digital systems can achieve higher precision and reduce errors through error detection and correction algorithms.
Flexibility: DSP systems can be easily reprogrammed or updated to accommodate new requirements or improvements, making them adaptable to changing technologies.
Complex Processing Capabilities: Digital processors can perform complex mathematical operations that are difficult to achieve with analog systems, enabling advanced applications such as real-time image processing and speech recognition.
Applications of Digital Signal Processing
The versatility of DSP has led to its adoption across various fields within electrical engineering and beyond:
1. Audio and Speech Processing
DSP is extensively used in audio applications, including:
Audio Compression: Techniques like MP3 and AAC reduce file sizes while preserving sound quality, making audio files easier to store and transmit.
Speech Recognition: DSP algorithms are crucial for converting spoken language into text, enabling voice-activated assistants and transcription services.
2. Image and Video Processing
In the realm of visual media, DSP techniques enhance the quality and efficiency of image and video data:
Digital Image Processing: Applications include noise reduction, image enhancement, and feature extraction, which are essential for fields such as medical imaging and remote sensing.
Video Compression: Standards like H.264 and HEVC enable efficient storage and streaming of high-definition video content.
3. Telecommunications
DSP plays a vital role in modern communication systems:
Modulation and Demodulation: DSP techniques are used in encoding and decoding signals for transmission over various media, including wireless and optical networks.
Error Correction: Algorithms such as Reed-Solomon and Turbo codes enhance data integrity during transmission, ensuring reliable communication.
4. Radar and Sonar Systems
DSP is fundamental in radar and sonar applications, where it is used for:
Object Detection: DSP processes signals to identify and track objects, crucial for air traffic control and maritime navigation.
Environmental Monitoring: Sonar systems utilize DSP to analyze underwater acoustics for applications in marine biology and oceanography.
5. Biomedical Engineering
In healthcare, DSP enhances diagnostic and therapeutic technologies:
Medical Imaging: Techniques such as MRI and CT scans rely on DSP for image reconstruction and analysis, improving diagnostic accuracy.
Wearable Health Monitoring: Devices that track physiological signals (e.g., heart rate, glucose levels) use DSP to process and interpret data in real time.
Trends in Digital Signal Processing
As technology evolves, several trends are shaping the future of DSP:
1. Integration with Artificial Intelligence
The convergence of DSP and AI is leading to smarter systems capable of learning and adapting to user needs. Machine learning algorithms can enhance traditional DSP techniques, enabling more sophisticated applications in areas like autonomous vehicles and smart home devices.
2. Increased Use of FPGAs and ASICs
Field-Programmable Gate Arrays (FPGAs) and Application-Specific Integrated Circuits (ASICs) are increasingly used for implementing DSP algorithms. These technologies offer high performance and efficiency, making them suitable for real-time processing in demanding applications such as telecommunications and multimedia.
3. Internet of Things (IoT)
The proliferation of IoT devices is driving demand for efficient DSP solutions that can process data locally. This trend emphasizes the need for low-power, high-performance DSP algorithms that can operate on resource-constrained devices.
4. Cloud-Based DSP
Cloud computing is transforming how DSP is implemented, allowing for scalable processing power and storage. This shift enables complex signal processing tasks to be performed remotely, facilitating real-time analysis and data sharing across devices.
Conclusion
Digital Signal Processing has significantly impacted electrical engineering, enhancing the quality and functionality of signals across various applications. Its versatility and adaptability make it a critical component of modern technology, driving innovations in audio, image processing, telecommunications, and biomedical fields. As DSP continues to evolve, emerging trends such as AI integration, IoT, and cloud computing will further expand its capabilities and applications, ensuring that it remains at the forefront of technological advancement. The ongoing development of DSP technologies promises to enhance our ability to process and utilize information in increasingly sophisticated ways, shaping the future of engineering and technology.
2 notes · View notes
digilogic-system · 11 months ago
Text
DVB-S2 Demodulator from Digilogic Systems
The Digital Video Broadcasting Satellite Second Generation (DVB-S2)  demodulator represents the highest level of innovation in satellite communication. Its state-of-the-art technology redefines data transmission, introducing new benchmarks for performance and reliability. In an ever-evolving world where communication demands are constantly increasing, the DVB-S2 demodulator stands out as an alert to efficiency. It not only meets but exceeds the expectations of modern satellite communication systems, offering unparalleled capabilities that enable seamless transmission of digital video, interactive services, news gathering, and professional services. This advancement sets a new standard, ensuring optimal performance and reliability in satellite-based data transmission.
Tumblr media
What is a DVB-S2 Demodulator?
DVB-S2 Demodulator is a powerful and low-complexity technology that enables symbol rates up to 30MSymb/s, making it appropriate for current satellite transmissions. Designed for the use of contemporary KU035/KU040/KU060 series FPGAs but still capable of delivering high-performing performance-efficient figures.
DVB-S2 Satellite receiver, the second generation of the Digital Video Broadcasting-Satellite standard, dubbed DVB-R180, provides some improvements in satellite transmission. Compared to the previous version, DVB-S2 does not have any RF or channel coding aspects but is only a digital baseband core, which guarantees proper and efficient data transmission. It serves many purposes such as broadcasting services, interactive services, and professional work. In satellite communications, the demodulator to handle higher symbol rates improves the quality and dependability of the communication transmission hence the state-of-the-art component of digital broadcasting and data transmission.
How does the Digilogic Systems DVB-S2 Demodulator work?
The DVB-S2 Demodulator from Digilogic Systems is a low-cost, low-complexity, robust digital baseband core designed for highly efficient new-generation satellite transmission. It achieves symbol rates of up to 30 MSymb/s for KU035, KU040, and KU060 kinds of advanced FPGAs. The demodulator also plays the pivotal role of extracting satellite signals, which are demodulated from a modulated condition into a baseband digital form.
There are several complex processes involved in signal processing that include demodulation, error checking, and decoding to ensure that received data is correct. The use of high-end FPGAs enables the design to be processed at high speed without accumulating inaccurate results enabling it to suit current satellite communication systems.
What symbol rates can the Digilogic Systems DVB-S2 Demodulator handle?
The DVB-S2 Demodulator can handle symbol rates of up to 30MSymb/s, making it suitable for high-speed satellite communication applications.
How does Digilogic’s DVB-S2 improve upon the previous DVB-S standard?
DVB-S2 offers enhanced error correction, higher spectral efficiency, and better support for high-definition TV and interactive services compared to the DVB-S standard. This results in more robust and efficient satellite communication.
Applications:
Satellite communication (Digital Video Broadcasting, Interactive Services, News Gathering, Professional Services).
Nanosatellite and CubeSat devices.
Features:
Compliant with ETSI EN 302 307 Version 1.2.1
Supports ACM mode.
Support for QPSK, 8-PSK.
Support for Short Frame (16200 bits) and Normal Frame (64800 bits).
Benefits:
The demodulator contains a radio interface, decimator, timing recovery, equalizer, frame acquisition, and carrier recovery.
Demodulator performs and supports spectrum inversion, DC offset correction, I/Q imbalance correction, decimation, coarse frequency estimation, timing recovery, matched filtering, downsampling, frame synchronization, PL descrambling, fine frequency correction, phase correction, automatic gain control, PL defoaming.
Low-power and low-complexity design.
Very fast synchronization due to different sets of filter coefficients for acquisition and tracking mode.
Available for KU060 Xilinx FPGAs.
Deliverable includes VHDL source code or synthesized netlist.
Conclusion:
Digilogic Systems' DVB-S2 Demodulator is a high-level product in satellite communication, compatible with complex modulation techniques and offering flexibility for various frame categories. It is used in broadcasting services and space exploration. The software features spectrum inversion support and automatic gain control for high-quality results. As a low-power device with fast synchronization capabilities, it is a promising component for advanced FPGAs, including the KU060 series, which are future-oriented for satellite communication systems. It is a reliable component for satellite communication systems.
Contact us today to discuss your DVB-S2 demodulator requirements:
Website: https://www.digilogicsystems.com/
Phone:
Hyderabad: (+91) 40 4547 4601 / 02 / 03
Bengaluru: (+91) 80 4975 6034
Locations:
HEAD OFFICE          
#102, 1st Floor, DSL Abacus Tech Park Beside DSL Virtue Mall, Uppal, Hyderabad, Telangana-500 039, India
BRANCH OFFICE
#216, 3rd floor, Zareen Heights, Varthur Road, Nagavarapalya, C. V. Raman Nagar, Bengaluru, Karnataka — 560093.
0 notes
nfumbewalk · 8 months ago
Text
What is it?
Tumblr media
Tell me, what exactly is regular ppl's fascination with necromancy? It's not mine. I'm not fascinated. I'm called, I'm wired for it. It's my place in the world. I love muertos and they 💖 me back. Hmm. Like, Tolkien mentioned the necromancer once in the Hobbit book? And the movie overdid it. WTH?
I think it's ppl's interest in either talking to muertos like they did during the spiritualist phases in America or it's just the thought of some life after death. I wonder why we don't see anymore huge sales of Ouija boards anymore? Too antiquated? Maybe folks just don't believe the same things anymore. I think the internet was more of a curse than a blessing. It ruined a lot of simplicity that we had as well as robbing innocence. Ppl found information just fine without the internet.
Though, I wouldn't have met my husband. That was in 2003 though. No social media, just Yahoo and Aol. I was still on dial up internet! You know modulator demodulators - aka modems.
Anyway, I'm fucking tired and loopy, totally spun and need sleep!
Necromancy is such a rich & loaded word to just mean "divination with the dead" in Greek. Yes, studied medical Greek. I'm familiar with suffixes & combining forms, prefixes & all...very good at it, 4.0 grades. Though I need to dig out my Greek & Roman necromancy book & take a perusal. I'm more into local (American) & Latino culture, not European, Greek, or Roman culture. Egyptian is overdone. Not my potato.
Ppl on Elder Scrolls Online (ESO) bitched about having a Necromancer build for five years until they added one! My husband kicks ass as a Dark Elf Dragonknight girl character. She's magicka based. His legacy build is a Wood Elf Nightblade girl that's all stam based who used to kick major ass playing in ball groups. But..that was 7-10 years ago. He just plays at leisure now. Should see his fucking dungeon trophies! Lol! I just like ESO. Sorry! Just manic from being spun. Dangerous combo. Oh yeah, he's AD. Not a Smurf or a Red. So, why does he play girl characters? He'd rather look at a female ass when he's on his mount (riding animal). His words! Rofl! 😂
Back to necro...so sorry! Why do you think ppl love the necromancy mystique? I'm directly involved but can only see what I mentioned above. Do you think my analysis is accurate?
M.M. 💖💀💖
3 notes · View notes
dailyfont-com · 1 year ago
Photo
Tumblr media
Demodulator is a font available for download. It can be accessed through the provided link: Download Demodulator. This font is suitable for various design purposes and can add a unique touch to your projects.
Link: https://dailyfont.com/demodulator
2 notes · View notes
engineering-guff · 1 year ago
Text
Electronics Components and Uses:
Here is a list of common electronics components and their uses:
Resistor:
Use: Limits or controls the flow of electric current in a circuit.
Capacitor:
Use: Stores and releases electrical energy; used for filtering, timing, and coupling in circuits.
Inductor:
Use: Stores energy in a magnetic field when current flows through it; used in filters, transformers, and oscillators.
Diode:
Use: Allows current to flow in one direction only; used for rectification, signal demodulation, and protection.
Transistor:
Use: Amplifies and switches electronic signals; fundamental building block of electronic circuits.
Integrated Circuit (IC):
Use: Contains multiple electronic components (transistors, resistors, capacitors) on a single chip; used for various functions like amplification, processing, and control.
Resistor Network:
Use: A combination of resistors in a single package; used in applications where multiple resistors are needed.
Potentiometer:
Use: Variable resistor that can be adjusted to control voltage in a circuit; used for volume controls, dimmer switches, etc.
Varistor:
Use: Protects electronic circuits from excessive voltage by acting as a voltage-dependent resistor.
Light-Emitting Diode (LED):
Use: Emits light when current flows through it; used for indicator lights, displays, and lighting.
Photodiode:
Use: Converts light into an electric current; used in light sensors and communication systems.
Zener Diode:
Use: Acts as a voltage regulator by maintaining a constant voltage across its terminals.
Crystal Oscillator:
Use: Generates a stable and precise frequency; used in clocks, microcontrollers, and communication devices.
Transformer:
Use: Transfers electrical energy between two or more coils through electromagnetic induction; used for voltage regulation and power distribution.
Capacitive Touch Sensor:
Use: Detects touch or proximity by changes in capacitance; used in touchscreens and proximity sensing applications.
Voltage Regulator:
Use: Maintains a constant output voltage regardless of changes in input voltage or load; used for stable power supply.
Relay:
Use: Electromagnetic switch that controls the flow of current in a circuit; used for remote switching and automation.
Fuse:
Use: Protects electronic circuits by breaking the circuit when current exceeds a certain value; prevents damage from overcurrent.
Thermistor:
Use: Resistor whose resistance changes with temperature; used for temperature sensing and compensation.
Microcontroller/Microprocessor:
Use: Processes and controls electronic signals; the brain of many electronic devices and systems.
Tumblr media
fig:google-electronics
Tumblr media
fig:google-electronics
Tumblr media
fig:Crystal-Oscillator
This list covers some of the basic electronic components, and there are many more specialized components used for specific applications within the field of electronics.
4 notes · View notes