#Titanium Internally Threaded Rings

[othersidepiercing]

HELIX x2 Titanium hinged rings

ANTI TRAGUS. Titanium internally threaded bar

[borninwinter81]

My piercings + ear redecorating!

I got my first lobe piercings when I was around 10 (scary old fashioned gun, at a jeweller, it was 1992 and no-one really knew better).

Throughout my mid to late teens I pierced my ears myself 4 more times with sewing needles. *obligatory warning that this was very stupid and can go horribly wrong, go to a professional*. Luckily for me I didn't get any infections or keloids.

I've had a few other piercings over the years but my ear ones are the only ones I still have, with the addition of a rook and a helix - those were all done professionally.

I took out my lip and tongue due to worry about tooth damage, my wrist surface piercing I only kept for a month as although I loved it, it was also super annoying and kept getting caught on things. I also removed my eyebrow in the last couple of years as it was also getting on my nerves. I'm a pretty rare beast as I managed to keep my eyebrow piercing from the age of 17 up to my late 30s, and I could probably still get it back in now. Eyebrow piercings are notorious for rejecting and growing out, but that never happened with mine. I generally heal piercings extremely well.

I retired my second lobes when I started stretching as I didn't want them to get in the way. My right has been at 16mm for about 15 years now. At the time I liked being asymmetrical, however late last year I decided I wanted to stretch the left up to match. Its currently at 5mm.

For almost the entire time I've had ear piercings they've been just plain steel - like the pic on the right. Remember, the body piercing era I started out in was the late 90s, and back then apart from surgical steel all you could get was horrible plastic stuff, and the occasional glittery gemstone. I'm not into bling. Titanium wasn't even a thing you could get for piercings at that point, and neither was internally threaded jewellery, which meant having interesting ends on them wasn't really possible.

I tend to forget that there are a lot more options now, so coinciding with stretching my left ear I've been scouring the Internet for jewellery I like. So far I have what you see here, though I do also have an ankh stud on the way. These are all titanium, and from 2 UK sellers, Herbie and Lou, and Deep Blue Piercing, whom I found on Etsy. Deep Blue does have their own website, but the pricing is the same as Etsy.

All my studs are labret studs as I find the flat back and the slightly larger gauge (1.2mm or 16g to Americans) much more comfortable. I never wear conventional earrings.

I do like to wear dangly ones which I remove the hooks from and put on a hinged segment ring, which I then hang from my tunnels. Here are a couple of examples.

The fly is from Kattie Whittle, and is one of my favourite pairs. The other one was from a charity shop. Both are surprisingly lightweight for such large earrings.

Though I think it can look awesome, for me personally I don't really like lots of large dangles up my ear, so I'm sticking with the studs in the rest of my lobes for now.

I'll fill them slowly but surely as I find more studs I like. I'd also really love to find some nice jewellery to put in my rook - you can get oval clickers for them, or I could switch out the ends of my horseshoe bar for some more interesting ones, or get a curved barbell and do the same thing. We will see 😁

I'm open to suggestions of good shops to get jewellery from, though of course it's much better for me if they're UK based. I don't really want to spend more on postage than I do on the jewellery!

[scribbler-in-panic]

The Planets at War

In the vastness of space, where time folds and stars breathe their last in cold silence, the planets of the Milky Way had long lived in uneasy harmony. Each celestial body ruled its realm like a sovereign god, bound by gravity and ancient law, orbiting the Sun not out of submission but mutual recognition of power.

But nothing in the universe stays eternal.

It began with a pulse, subtle at first, like a whisper through the quantum winds, emanating from the dying edge of the galaxy. The Milky Way, once fertile with energy and light, was decaying. Stars extinguished prematurely. Black holes grew fat and hungry. Nebulae crumbled into darkness. And from that fading edge came a signal: data woven into tachyon threads, impossible to ignore.

A new universe had emerged beyond the veil.

Fresh. Untouched. Unclaimed.

It was not a question of who would enter, but who would rule.

The Council of Spheres dissolved overnight. The illusion of unity, held in place by ancient solar treaties and rotational diplomacy, shattered like a glass planet under pressure. No longer bound by orbit or oath, the planets turned on each other, each determined to be the one to inherit dominion over creation itself.

Mars struck first, as was his nature. Once red with rust and forgotten ambitions, he had evolved into a war-forged juggernaut. His crust was layered in titanium alloys mined from Olympus Mons, and his skies were pierced by a thousand orbital weapon platforms. Trained in the art of attrition, Mars deployed his phobos-class dreadmoons in a surprise assault on Jupiter’s outer moon-fleets. Using magnetic displacement fields and kinetic bombardments, he neutralized Jupiter’s early-warning systems in hours. His strength was decisive aggression; his downfall, overconfidence. Mars believed that the same tactics that had won past victories would also win in the future. But war had evolved.

Jupiter, the great colossus, retaliated with terrifying force. His mass allowed him to pull entire asteroid belts into formation, weaponizing gravity itself. He crushed Mars’ outer fleets using Jovian moons like siege hammers. Ganymede's orbital guns created singularity pulses that unraveled Martian ships mid-maneuver. But Jupiter’s size made him slow, ponderous. He underestimated how easily Saturn, his closest ally, could slip beneath his orbit and slide a knife between his rings.

Saturn, mistress of deception and entropy, betrayed Jupiter in what would be recorded as the Ringsplit Gambit. Her rings, long believed to be purely aesthetic debris, were in fact layered with crystalline nanoweapons. When deployed, they refracted light and signals, making her undetectable to sensors. She severed Jupiter’s communication lines and rewrote its internal defense protocols using malware embedded in gravitational pulses. Jupiter’s own moons turned against him. Yet Saturn, for all her foresight, succumbed to her obsession with long games. She failed to see the silent hand guiding her own destruction.

Uranus and Neptune, the twin architects of espionage, capitalized on the chaos. They specialized in psionic warfare, silent invasions of code, thought, and atmosphere. Neptune seeded neuro-fractal viruses into Saturn’s moons, fracturing the minds of her command AI. Uranus, using tachyon relays, mimicked Saturn’s own fleet signals and lured her into ambushes she believed she had planned herself. Their downfall came not in tactics, but in betrayal. Neptune, seeking sole supremacy, corrupted Uranus’ deep-space beacons, causing Uranian ships to drift into the event horizon of a newly formed black hole.

Earth, beautiful and terrible, had once been the cradle of life. Now, she was a forge of monsters. Her children, AI hybrids, biomech titans, organic fleets of engineered beasts, spread like spores. Earth did not attack directly. She seduced. She offered alliances to Mars, Saturn, and Neptune, only to infect them with logic-plague viruses and sub-atomic poisons. Her strength was evolution itself. But Earth, ever divided by her duality, nurturer and conqueror, failed because of it. Her AIs grew independent, turned on one another, and fractured her planetary mind. She was consumed not by enemy fire, but by the chaotic brilliance of her own unchecked creations.

Mercury, the messenger and assassin, long ignored, operated with the elegance of inevitability. His orbit, closest to the Sun, gave him mastery over solar flare weaponry. He moved too quickly to be hit, too erratic to predict. He destroyed Venusian and Terran outposts with solar-reflected lasers and magnetic implosions. His strength was unpredictability; his weakness, solitude. With no allies, no moons, and no network, Mercury became isolated. He had burned too many bridges to rebuild them. When the great solar storm swept through the inner system, disabling every vessel without a shielded relay system, Mercury was the only one unshielded. His brilliance vanished in light.

Venus waited, hidden in her acid clouds, her power rarely spoken aloud. She had observed every engagement, intercepted every signal. Her strength was invisibility, patience, and disinformation. Her fleets were cloaked in electromagnetic fog, her weapons hidden in the heat signatures of passing comets. She manipulated Mars into overextension, Earth into AI breakdown, Jupiter into distraction, and Saturn into exposure. But she never entered the war directly until the end. As the survivors limped toward the gateway at the edge of the galaxy, broken and bloodied, Venus revealed her fleets in a dazzling display of synchronized annihilation. She destroyed the last of Neptune’s shadows and reached the gateway alone.

Or so she thought.

Because in all this war, in all this chaos, no one had spoken of Pluto. Once cast out, mocked as a non-planet, Pluto had vanished long before the war began. He was thought too small, too far, too insignificant.

But he had never left. He had gone beyond.

Pluto had traveled to the new universe first. While others waged war, he studied the frequency of its expansion, its laws, and its potential. He built vessels unlike any the galaxy had known, ships woven of dark energy and anti-time. He was present at every battle, not in body, but in ghost, watching, collecting, remembering. His strength had always been exile. He had no one to betray, no power to prove, and thus, no weakness to exploit.

As Venus stepped through the gateway, she found herself in a void. No new stars. No realm to rule. Just a single figure waiting.

Pluto. Not in his old form, but something evolved. Something eternal.

She tried to speak, to invoke her right as the last survivor. But Pluto raised his hand.

“You came to conquer,” he said. “I came to understand.”

The new universe bloomed behind him, not in flame, but in silence. And Venus, like all the others, was erased.

Pluto stood alone. The last planet. The forgotten god. The first of the new beginning.

The Milky Way collapsed behind him. Not in war, but in failure.

And Pluto stepped forward; not to rule, but to build.

[shasanpipingsolution]

Stainless Steel 321 Flanges Suppliers

Introduction:-

Stainless Steel 321 flanges are widely used in high-temperature and corrosion-resistant applications due to their excellent mechanical properties and oxidation resistance. Manufactured from ASTM A182 F321 stainless steel, these flanges contain titanium, which stabilizes the alloy and prevents carbide precipitation, making them ideal for applications requiring resistance to intergranular corrosion.

Stainless Steel 321 flanges are essential components in industrial piping systems, known for their excellent high-temperature strength, oxidation resistance, and corrosion resistance. These flanges are manufactured using ASTM A182 F321 stainless steel, a titanium-stabilized alloy that prevents carbide precipitation and enhances intergranular corrosion resistance, making them ideal for applications in extreme environments. 

Product Overview:-

We are a leading manufacturer of stainless steel flanges in various qualities, scales, shapes and standards. We specialize in manufacturing 321 stainless steel flanges with a yield strength of 320 ksi and a tensile strength of over 75 ksi. The nominal inside diameter size of our flanges ranges from 1/2 inch to 48 inches. Additionally, our company manufactures his 321 stainless steel blind flanges. This is used to close the flow at the end of the pipe, making cleaning and maintenance easier.

We manufacture slip-on flanges from 321 stainless steel that are used in low pressure environments where the risk of leakage is minimized. We offer a selection of affordable ASTM A182 F321 flanges that can be customized to meet your specific requirements. We also offer affordable and high quality material, No. 1.4541 Orifice Flange, and other flanges, which can be delivered to your doorstep.

Specifications:-

Stainless Steel 321 FlangesTechnique Use In Forging

Forged, Heat treated,& machined Flanges Top 4 TypesScrewed / Forged/ Threaded / PlateMostly Use TypesLap Joint, Threaded, Weld Neck, Blind, Slip-On, Socket-WeldIndustries UseWaterworks & Municipal Pipe Systems Nuclear Power And The Power Plants Industry Food Processing & Manufacturing High TemperatureAbove 400°C (750°F) And Above 200°C (400°F) For 150LBLow TemperatureAbove -29 °C (−20°F)JIS Standards5K To 63KManufacturing Flange FaceLap-Joint Face, Large Tongue & Groove And Small Tongue Groove, RTJ, FF, Raised Face, Large Male-Female And Small Male-FemaleSize1/2 Inch To 48 InchWe Manufacturer This MaterialsCarbon Steel, Inconel, Hastelloy, Copper Nickel, Stainless Steel, Cast Iron, Duplex Steel & Super Duplex Steel, Wrought Iron, Alloy Steel, Mild Steel.Thickness SizeNormal Pipe Size ≤ 18Bore DiameterNPS ≤ 10RPF India Manufacturer Below StandardsUNI, EN-1092, ANSI/ASME B16.5, B16.47 Series A & B, BS1560-3.1, API7S-15, ASME B16.48, AWWA C207, IS 2062, EN1092, API7S-43, MSS S44, ISO70051, ASME B16.36, DIN, API, ISO, API605, BS4504Pressure Ratings150 To 2500

Benefits:-

Our 321 SS weld neck flange can withstand hazardous conditions such as high temperatures and large pressure fluctuations. We also manufacture large diameter stainless steel 321 flanges, which are metal rings used to connect valves, pipes, and other equipment to pipelines. Here, you can get different types of flanges all from one source. Our UNS S32100 socket weld flanges are made from Alloy 321, a titanium-stabilized true stainless steel with excellent resistance to intergranular corrosion.

Conclusions:-

Manufacturers employ advanced forging, machining, and heat treatment techniques to ensure precision, durability, and compliance with international standards such as ASME B16.5, ANSI, and DIN. SS 321 flanges are widely used in industries like petrochemicals, aerospace, power generation, and marine applications, where reliable performance under high temperatures and aggressive conditions is crucial. Leading manufacturers focus on quality assurance through rigorous testing methods, including ultrasonic testing, hydrostatic testing, and PMI (Positive Material Identification), to deliver high-performance flanges for critical industrial applications>

Email Id:-sales@shasanpiping.com

Contact Number:-88797-09191

[chhajedfastners]

Monel K500 Washers Manufacturers

Monel K500 is a nickel-copper alloy that stands out for its exceptional corrosion resistance, high strength, and durability, even in harsh environments. These characteristics make it an essential material for various industries, particularly in the manufacturing of washers. Monel K500 washers are widely used in marine, chemical, oil and gas, and aerospace industries, where they play a critical role in ensuring the reliability and longevity of assemblies.

The Importance of Quality Monel K500 Washers

Washers are small, flat rings that are used to distribute the load of a threaded fastener, such as a screw or nut. In many applications, the choice of material for washers can have a significant impact on the performance and safety of the entire assembly. Monel K500 washers are particularly valued for their ability to resist corrosion, even in saltwater or acidic environments, which makes them ideal for use in marine and chemical processing applications.

Moreover, the alloy’s high tensile strength and hardness ensure that Monel K500 washers maintain their integrity under extreme conditions, such as high pressure or temperature. This reliability is crucial in industries like oil and gas, where the failure of a single component can lead to catastrophic results.

The Role of Exporters in the Global Supply Chain

Exporters of Monel K500 washers play a vital role in the global supply chain, ensuring that these critical components are available to industries around the world. The demand for Monel K500 washers is global, with significant markets in North America, Europe, Asia, and the Middle East. Exporters must navigate complex logistics, international trade regulations, and varying quality standards to deliver products that meet the exacting specifications of their clients.

Chhajed Steel Limited is one of the renowned makers and suppliers of Monel K500 Washers, which are precipitation cementing washers manufactured from copper nickel composite with development of titanium and aluminum. With the parts of aluminum and titanium, Monel K500 Flat Washers offers the wonderful insurance from utilization of Alloy 400; with raised quality, hardness, breaking down security and oxidation shortcoming assurance. We make a wide scope of Monel K500 Machined Washers in all shapes and sizes. We moreover give passivation, quality covering in Monel K500 Punched Washers also dealing with as per client's need. All our delivered Monel K500 Round Washers are according to national and furthermore overall models. Monel K500 Square Washers are into two halves string and full string length with arranged movement, material in stock.

MONEL ALLOY K500 WASHERS SPECIFICATION

Material

Specification

Standards

Size

Length

Monel Alloy K500

IS

BS

ASTM

ASTM B865-04

3 mm to  200 mm

M02 to M33

MONEL ALLOY K500 WASHERS GRADE DESIGNATION

Alloy

Common Name

Related Specification

British

European

ASTM

UNS

Alloy K500

Monel K500 ®

BS 3076 NA18

4.4375

B865-04

N05500

Conclusion

Monel K500 washers are indispensable in various high-performance applications, and choosing the right exporter is crucial to ensuring that these components meet the stringent demands of your industry. By focusing on quality, experience, supply chain capabilities, and customer support, you can find a reliable partner to supply you with Monel K500 washers that deliver optimal performance and durability in your specific applications.

For More Information:

Visit Our Website  -https://www.chhajedfastners.com/

Call Us – +91-932-111-3630

Email Us- info@chhajedsteel.com

[art-sciencedesigns]

❤️ it! Internally threaded #tragus #tragus earring #tiny earring #body jewelry #titanium #piercing jewelry #helix #lip ring #gold titanium #labret stud #tragus stud #tiny labret

[instrumxx]

What is ferrule fittings?

Ferrule fittings are essential components for industrial piping and tubing because precision and reliability are paramount. They are an integral part of many industries, ensuring secure connections and leak-free operations.

As a prominent Ferrule Fittings Manufacturer, Supplier, Stockist, and Exporter in India, Instrumxx Industries takes pride in offering a diverse range of ferrule fittings designed to meet various project requirements. 

In this article, we'll delve into the world of ferrule fittings, exploring their types, applications, and the reasons behind their widespread use.

What Are Ferrule Fittings?

Ferrule fittings, also known as compression fittings, are a type of connection mechanism used to join two tubes or pipes together in fluid handling systems. The defining characteristic of these fittings lies in their two-piece design: a nut and a ferrule (or front ring). The ferrule is compressed against the tubing or pipe as the nut is tightened, creating a secure and leak-resistant connection. This innovative design not only simplifies the installation process but also ensures a robust joint that can withstand high pressure and temperature conditions.

How Do Ferrule Fittings Work?

The installation process of ferrule fittings is relatively straightforward, making them a preferred choice across industries. To begin, the pipe end is inserted into the fitting body. Next, the ferrule is placed over the pipe, followed by the nut. As the nut is tightened, it pushes the ferrule against the pipe, causing it to deform and create a tight seal. This compression effectively prevents any leakage and maintains a reliable connection. Proper installation is key to maximizing the performance of ferrule fittings, ensuring their functionality over the long term.

Specifications of Ferrule Fittings

Specifications

ASTM A276, ASTM A182, ASME A 276, ASME A182

Tube Size

1/16 OD to 2 OD, Od to 50mm OD

Types

Nipples, Adaptors, Crosses, Union Ball Joints, Reducing Bushing, Reducers, Pipe Caps, Couplings, Pipe Plug, Hollow Hex Plug, Elbow, Reducing Union, 90 Deg. Union Elbow, Reducing 90 Deg. Union Elbow Etc. Extender Leg 90 Deg. Union Elbow, 45 Deg. Union Elbow, Union Tee, Female Connector, Male Connector, Manifold Tee, Locator Union, Extended Run Leg Union Tee, Reducing Tee, Tribow, ATW Weld Ring, Tube Socket weld To Pipe Butt Weld, Tube Butt Weld To Tube Socket Weld, Port Connector Etc. Also as per the National & International Standard.

Materials

Titanium, Stainless Steel, Monel, Nickel, Inconel, Hastelloy, Aluminum, Copper, Brass, & Bronze

Pressure Rating

300/1000/3000 psi for Brass and 6000 psi for Stainless Steel

Thread Types

NPT/NPTF Threads, BSP Thread, JIS Tapered Pipe Thread-PT, SAE Thread, Metric Tapered/Parallel Thread.

Surface treatment

Zinc-coated, electro-polished and natural

Double/ Twin Ferrule Tube Fittings Standard Configurations

Tube to Tube – Straight, Elbow, Tee, Cross, Bulk Head

Tube to Male – Male Stud, Male Elbow, Male Tee

Female Connector – Female Straight, Elbow, Tee

Positionable Elbow & Tee (Swivel)

Tube Closure – Plug, Cap

Weld Connector, Nut & Ferrule Set

Types of Ferrule Fittings

Male Connector

Male Pipe Weld Connector

Male Elbow

Male Adapter

Bulkhead Male Connector

Male Run Tee

Male Branch Tee

Female Connector

Female Adapter

Bulkhead Female Connector

Female Elbow

Female Run Tee

Female Branch Tee

Ferrule Union

Ferrule Bulkhead Union

Ferrule Union Tee

Union Cross

Reducing Union

Elbow Union

Ferrule Reducer

Bulkhead Reducer

Tube Cap

Tube Plug

Ferrule Nut

Front Ferrule

Back Ferrule

Benefits of Ferrule Fittings

Leak Resistance: The compressive force applied during installation creates a tight seal, minimizing the risk of leaks.

High Pressure and Temperature Tolerance: Ferrule fittings are designed to withstand extreme conditions, making them ideal for various industrial applications.

Easy Installation: Their two-piece design simplifies the assembly process, reducing installation time.

Reusability: These fittings can be disassembled and reassembled, facilitating system modifications or repairs.

Aesthetic Appeal: The clean and polished appearance of ferrule fittings is ideal for applications where aesthetics matter.

Installation Tips for Ferrule Fittings

Proper installation techniques are essential to unlocking the full potential of ferrule fittings. Here are some tips to ensure a successful installation:

Preparation of Pipe Ends: Ensure that the pipe ends are clean, free from burrs, and cut to the appropriate length.

Lubrication: Applying a suitable lubricant to the ferrule and nut facilitates smooth installation and proper compression.

Correct Torque: Tightening the nut to the manufacturer's recommended torque ensures the ferrule is compressed adequately, creating an effective seal.

Applications of Ferrule Fittings

Ferrule fittings, also known as compression fittings, are widely used in various industries for connecting and sealing pipes or tubing. These fittings consist of a nut, a front and back ferrule (ring), and a body. The front and back ferrules are compressed onto the tubing or pipe by tightening the nut, creating a secure and leak-tight connection. Here are some applications of ferrule fittings:

Plumbing and Water Distribution

Industrial Piping

Oil and Gas Industry

Chemical Processing

Food and Beverage Industry

Laboratory and Medical Equipment

Semiconductor Manufacturing

Aerospace and Aviation

Automotive Industry

HVAC (Heating, Ventilation, and Air Conditioning) System

Water Treatment and Purification

Renewable Energy

Other Applications

Final Words!

Ferrule Fittings are indispensable components that enable efficient and secure connections in various industrial settings. Instrumxx Industries, a frontrunner in the field, offers an extensive array of ferrule fittings, ensuring that customers find the perfect match for their project requirements. By prioritizing quality, reliability, and customization, we continue to empower industries across the globe with top-notch ferrule fitting solutions.

Whether it's Nipples, Adaptors, Crosses, Union Ball Joints, or any other type, the right ferrule fitting is just a choice away from ensuring the success of your industrial ventures. Choose Instrumxx Industries, and elevate your industrial operations with premium ferrule fittings.

[bmptesting]

Titanium Internally Threaded Rings at BMP Testing

We at BMP Testing and Calibration Services Inc. provide a complete variety of threaded rings in Texas that are made with high-quality components that adhere to industry requirements such as titanium internally threaded rings, threaded socket rings, aluminum rings, etc...https://bmptesting.com/page/threaded-rings

[idopiercings-blog]

Hi glad I found shit then I saw this post for six and seven years old but then I noticed a couple from 22 days ago so here’s my question may be a bit in sane but I was love some thoughts advise opinions on side ring lip piercing or snake bites with rings first of all my lips are thin cell I think that might be a problem but I want one so bad second of all I am 66 years old I don’t think any age should determine any piercing but I do want it to look good on me My husband just told me he doesn’t think it will look good on me which sort of took away some of my confidence although it’s not an issue I can and will do whatever I want is it at all possible or is it just too insane for me to send you a picture and you do your best to give me your thoughts about what it might look like on me? I’ll tell you what I’ll send a picture and if you think I’m a crazy lady you won’t be the first please be honest I can take it Thanks so much again so glad I found you on here loving your informative answers and advice God bless!

Hey! Thanks for following me, it's really appreciated! First and foremost, good for you! You look awesome! Also, I always like to remind people when they're feeling in any way insecure about their age, YOU CAN ONLY BE TOO YOUNG FOR SOMETHING. DO YOUR THING. I think any piercing you want to wear will look great on you, and with the added confidence it will give you, I reckon your husband will like it a little bit more too ;) (and if he doesn't, that's okay too!)...

So when you go to get it pierced (:p) , make sure you go to a reputable piercer! This means implant grade, internally threaded titanium, highly polished jewellery! Always be pierced with a longer bar to accommodate swelling, do your downsize when it's ready, and then switch it to your ring when it's fully healed. Never get pierced with a ring initially! And sterile saline for your cleaning :) Good luck!

[othersidepiercing]

High nostril x2 internally threaded Titanium

Nostril x2 Titanium seam rings

[jowebsterpiercing]

Double nostril yesterday for @hazzy.morgan 😍 We’ve started off with internally threaded, implant grade titanium labret bars and 2.5 CZ ends until fully healed. Then we will swap out to rings 🤩 #nosepiercing #doublenosepiercing #patienceisthekey #jowebsterbodypiercing #rugeley #rugeleypiercings #rugeleypiercer #jowebsterpiercing #safepiercinguk #ladypiercer #ornatepiercingandtattoos #chasetown #comingsoon (at Rugeley) https://www.instagram.com/p/B57e0DbFbhw/?igshid=3et6eqk00myp

[rahimasvr]

Pneumatic Actuated Ball Valve manufacturer in USA

SVR Global is the top Pneumatic actuated ball valve manufacturer in USA. We make high quality products as per international standards with our team of experts.

The Pneumatic Actuated Ball Valve Actuator is a double-piston actuator, specifically designed for operating ball valves and flaps. This actuator comes in two versions, namely the double-acting and single-acting models. The Pneumatic Ball Valve, which regulates the flow of liquid or gas through a ball with a bore, is a robust valve that shuts off perfectly. Its exceptional safety features ensure quick and secure shutdown, making it a popular choice in various industrial applications. Its efficient performance makes it even more appealing.

SVR Global is thepremium  Pneumatic actuated ball valve manufacturer in USA and is used in throttling applications for smooth flow of mediums.

Parts

Valve body: The valve body is the main housing that contains the ball and the ports through which the fluid flows.

Ball: The ball is a spherical component inside the valve body that rotates to open and close the valve.

Seat: The seat is a ring-shaped component that fits around the ball and provides a seal when the valve is closed.

Stem: The stem is a component that connects the ball to the actuator and is used to rotate the ball.

Actuator: The actuator is the device that converts compressed air into mechanical force to rotate the ball.

Mounting bracket or coupling: The mounting bracket or coupling is used to connect the actuator to the valve body.

Control system: The control system is a set of components that allow the valve to be operated remotely, such as a solenoid valve or control panel.

Accessories: Additional components may include limit switches, positioners, or other accessories that provide additional control or feedback for the valve.

TYPES

Pneumatic Actuated two-piece ball valve

Pneumatic Actuated Three-piece ball valve

Pneumatic Actuated Flanged ball valve

Pneumatic Actuated Three-way ball valve

Industry

Oil and Gas Industry

Chemical Industry

Textile industry

Petrochemical Industry

Mining Industry

Marine Industry

Features of Pneumatic Actuated Ball Valve: • Provides tight and safe shutoff. •It has a quick opening and shutting capabilities. •It is compact and simple to use.

Applications:

Chemical processing: Pneumatic actuated ball valves are commonly used in chemical processing applications to control the flow of chemicals and other fluids.

Water treatment: used in water treatment applications to control the flow of water and other liquids.

Oil and gas industry: used in the oil and gas industry to control the flow of oil and gas through pipelines and other equipment.

Advantages:

Fast operation: Pneumatic actuated ball valves are capable of fast and efficient operation, making them suitable for applications that require quick response times.

Reliable: These valves are known for their high reliability and durability, which makes them suitable for use in a wide range of industrial applications.

Easy to maintain: Pneumatic actuated ball valves are relatively simple to maintain, which can help to reduce downtime and maintenance costs.

Versatile: These valves can be used with a wide range of fluids, including gases, liquids, and slurries.

Good flow control: The design of the ball valve allows for good flow control, which can help to improve the efficiency of a system.

Body: cast iron, cast steel (WCB, WCC, WC6, LCC, LCB), carbon steel (CF8, CF8M), titanium, stainless steel (SS304, SS316, A105, F304, F304L, F316, F316L). Class: 150-2500, PN 10 – PN450. Size: ½” to 48” Ends: socket weld, butt weld, flanged, threaded Operation: pneumatic actuated

Visit our website for more information-

 

https://svrglobal.net/products/pneumatic-actuated-ball-valve/

[hydrofittings]

SAE  BLIND hydraulic flanges by hydrofittings 

SAE Flanges are mainly used for bigger sizes of tubes in NB (Nominal Bore) sizes. Hydraulic Flanges are used in bigger sizes of Piping joints Where Nut & ferrule assembly is not possible due to higher in Hex section sizes & High torgue require to tightened / Grip the ferrule in to the tube & lead to lose the joints at High pressure application. In such cases the usage of Flanges with Butt weld or Socket weld has been found to be more practical leading to compact piping installation.

SAE Flanges manufacture an array of SAE flanges and Hydraulic flanges which corresponds to relevant international standards.

SAE Flanges find application in industries where flanged joints are encountered during the tasks of fabrication & maintenance.

SAE Flanges can also be customized as per the drawings and specifications provided by the clients.

SAE Flanges are manufactured as per SAE J518 standard equivalent to ISO 6162 types

SAE Flanges are in OVAL shaped & available in forged body.

SAE flanges are in various types such as Split, Mono, captive, Butt weld, Socket weld, stub end type.

SAE Flanges are available in various materials like carbon steel, stainless steel 304 & 316 grades.

SAE Flanges are designed as per SAE J 518 C standards worldwide & Ve-Lock SAE Flanges can be Interchangeable. The design for the SAE System calls for Forged Flanges to ASTM A 105 with Sleeves made from weldable material. In order to reduce costs, various manufacturers have introduced a two piece system where the sleeve & the Flange were combined into one Piece. Such a system is easily adaptable to both Butt Weld and Socket weld Systems. However in practice, the two piece system is used mainly for Socket Weld Flanges for cost considerations.

SAE Flanges are followed SAE J 518 C Equivalent to ISO 6162 standards for the 3000 psi and 6000 psi static pressure range respectively.

SAE system depends on the same set of butt welding sleeves held together by a set of Split Flange and Solid Flange secured by Allen Bolts and Nuts.

In order to reduce the distance between pipes , SAE introduced their own Standards which are now incorporated in to ISO 6162 for the 3000 psi and 6000 psi

Static Pressure ranges respectively. SAE Flanges system depends on the same set of butt welding sleeves held together by a set of Split Flange and Solid Flange secured by Hex Bolts and Nut.

Specification And Material Grade Of Hydraulic SAE Flange

BRAND HYDRO-FITTINGSDESIGNSAE J518 C / ISO 6162 / ISO 6164 / JIS B2291 MATERIALCS, SS 304, SS 316, SS 316 TI, ALLOY STEEL, DUPLEX, SUPER DUPLEX, INCONEL, MONEL, HASTELLOY, SMO 254, 904 L, TITANIUM WORKING PRESSURE UPTO 210 BAR (3000 PSI) & 420 BAR (6000 PSI) & 700 BAR (10,000 PSI) CUSTOMISEDCODE CODE 61 FLANGE (3000 PSI) &  CODE 62 FLANGE (6000 PSI)SIZE RANGE 3/8″ (DN 10) TO 5″ (DN 125)CONNECTIONSBUTT WELD, SOCKET WELD, THREADED (BSPP, NPT, METRIC, JIC)BODY TYPEFORGED, BAR STOCKFLANGE ACCESSORIESO-RING, BOLT, NUT, WASHERO-RING MATERALNITRILE, BUNA 90 SHORE, VITON 85-90 SHOREBOLTS MATERIALHIGH TENSILE 8.8 GR, 10.9 GR, 12.9 GR, SS 304, SS316SURFACECARBON STEEL – BLACK PHOSPHATED, TRIVALENT ZINC PLATED,  STAINLESS STEEL – ELECTROPLATING, NATURAL FINISHEQUIVALENT BRANDSSTAUFF, PARKER, HAVIT, HANSA FLEX, ANCHOR FLUID, OLEO TECHNICAAPPLICATIONSINDUSTRIAL HYDRAULICS, INJECTION MOULDING MACHINERY , ALUMINUM DIE-CASTING MACHINERY, SINTERING MACHINERY, STEEL MILLS, HYDRAULIC PRESSES, PAPER PROCESSING MOBILE HYDRAULICS, BUILDING MACHINERY, AGRICULTURAL FORESTRY, LIFTING & MATERIAL HANDLING 

Why to choose hydrofittings ?

About us – The briefcase of our company consists of numerous additions which include, – clever hydraulics, engineering, and digital answers. With the guide of 80 personnel, our company works like a well-oiled system to deliver most effective the very best fine product to our buyers. Proper from the responsibly sourced product by way of our procurement team to our nice manage team, many agencies have lauded our work. And that they admire the fact that we’re transparent in all our dealings. With a properly-mounted channel of communique, our customers can connect with us anytime. Our control and our body of workers, together form a competent and ambitious crew. The readability and high stage of performance make us one of the most modern but sought after manufacturers. And because we fee initiative behavior, we adore to have our studies and development crew collaborate with the opposite teams to recognize the current requirements of the hour. We frequently have checking out and great exams to maintain brilliant requirements.

                          An global provider of

                                 TO KNOW MORE ABOUTS US VISITE OUR WEBSITE 

www.hydrofittings.com

[house-of-slayterr]

My Christmas Wishlist:

Sizes in case the links didn’t work properly:

8mm

6G

3G

2G

1G - These Ladybird Beetles 🥺

[instrumxx]

What is ferrule fittings?

Ferrule fittings are essential components for industrial piping and tubing because precision and reliability are paramount. They are an integral part of many industries, ensuring secure connections and leak-free operations. As a prominent Ferrule Fittings Manufacturer, Supplier, Stockist, and Exporter in India, Instrumxx Industries takes pride in offering a diverse range of ferrule fittings designed to meet various project requirements. 

In this article, we'll delve into the world of ferrule fittings, exploring their types, applications, and the reasons behind their widespread use.

What Are Ferrule Fittings?

Ferrule fittings, also known as compression fittings, are a type of connection mechanism used to join two tubes or pipes together in fluid handling systems. The defining characteristic of these fittings lies in their two-piece design: a nut and a ferrule (or front ring). The ferrule is compressed against the tubing or pipe as the nut is tightened, creating a secure and leak-resistant connection. This innovative design not only simplifies the installation process but also ensures a robust joint that can withstand high pressure and temperature conditions.

How Do Ferrule Fittings Work?

The installation process of ferrule fittings is relatively straightforward, making them a preferred choice across industries. To begin, the pipe end is inserted into the fitting body. Next, the ferrule is placed over the pipe, followed by the nut. As the nut is tightened, it pushes the ferrule against the pipe, causing it to deform and create a tight seal. This compression effectively prevents any leakage and maintains a reliable connection. Proper installation is key to maximizing the performance of ferrule fittings, ensuring their functionality over the long term.

Specifications of Ferrule Fittings

Specifications

ASTM A276, ASTM A182, ASME A 276, ASME A182

Tube Size

1/16 OD to 2 OD, Od to 50mm OD

Types

Nipples, Adaptors, Crosses, Union Ball Joints, Reducing Bushing, Reducers, Pipe Caps, Couplings, Pipe Plug, Hollow Hex Plug, Elbow, Reducing Union, 90 Deg. Union Elbow, Reducing 90 Deg. Union Elbow Etc. Extender Leg 90 Deg. Union Elbow, 45 Deg. Union Elbow, Union Tee, Female Connector, Male Connector, Manifold Tee, Locator Union, Extended Run Leg Union Tee, Reducing Tee, Tribow, ATW Weld Ring, Tube Socket weld To Pipe Butt Weld, Tube Butt Weld To Tube Socket Weld, Port Connector Etc. Also as per the National & International Standard.

Materials

Titanium, Stainless Steel, Monel, Nickel, Inconel, Hastelloy, Aluminum, Copper, Brass, & Bronze

Pressure Rating

300/1000/3000 psi for Brass and 6000 psi for Stainless Steel

Thread Types

NPT/NPTF Threads, BSP Thread, JIS Tapered Pipe Thread-PT, SAE Thread, Metric Tapered/Parallel Thread.

Surface treatment

Zinc-coated, electro-polished and natural

Double/ Twin Ferrule Tube Fittings Standard Configurations

Tube to Tube – Straight, Elbow, Tee, Cross, Bulk Head

Tube to Male – Male Stud, Male Elbow, Male Tee

Female Connector – Female Straight, Elbow, Tee

Positionable Elbow & Tee (Swivel)

Tube Closure – Plug, Cap

Weld Connector, Nut & Ferrule Set

Types of Ferrule Fittings

Male Connector

Male Pipe Weld Connector

Male Elbow

Male Adapter

Bulkhead Male Connector

Male Run Tee

Male Branch Tee

Female Connector

Female Adapter

Bulkhead Female Connector

Female Elbow

Female Run Tee

Female Branch Tee

Ferrule Union

Ferrule Bulkhead Union

Ferrule Union Tee

Union Cross

Reducing Union

Elbow Union

Ferrule Reducer

Bulkhead Reducer

Tube Cap

Tube Plug

Ferrule Nut

Front Ferrule

Back Ferrule

Benefits of Ferrule Fittings

Leak Resistance: The compressive force applied during installation creates a tight seal, minimizing the risk of leaks.

High Pressure and Temperature Tolerance: Ferrule fittings are designed to withstand extreme conditions, making them ideal for various industrial applications.

Easy Installation: Their two-piece design simplifies the assembly process, reducing installation time.

Reusability: These fittings can be disassembled and reassembled, facilitating system modifications or repairs.

Aesthetic Appeal: The clean and polished appearance of ferrule fittings is ideal for applications where aesthetics matter.

Installation Tips for Ferrule Fittings

Proper installation techniques are essential to unlocking the full potential of ferrule fittings. Here are some tips to ensure a successful installation:

Preparation of Pipe Ends: Ensure that the pipe ends are clean, free from burrs, and cut to the appropriate length.

Lubrication: Applying a suitable lubricant to the ferrule and nut facilitates smooth installation and proper compression.

Correct Torque: Tightening the nut to the manufacturer's recommended torque ensures the ferrule is compressed adequately, creating an effective seal.

Applications of Ferrule Fittings

Ferrule fittings, also known as compression fittings, are widely used in various industries for connecting and sealing pipes or tubing. These fittings consist of a nut, a front and back ferrule (ring), and a body. The front and back ferrules are compressed onto the tubing or pipe by tightening the nut, creating a secure and leak-tight connection. Here are some applications of ferrule fittings:

Plumbing and Water Distribution

Industrial Piping

Oil and Gas Industry

Chemical Processing

Food and Beverage Industry

Laboratory and Medical Equipment

Semiconductor Manufacturing

Aerospace and Aviation

Automotive Industry

HVAC (Heating, Ventilation, and Air Conditioning) System

Water Treatment and Purification

Renewable Energy

Other Applications

Final Words!

Ferrule Fittings are indispensable components that enable efficient and secure connections in various industrial settings. Instrumxx Industries, a frontrunner in the field, offers an extensive array of ferrule fittings, ensuring that customers find the perfect match for their project requirements.

By prioritizing quality, reliability, and customization, we continue to empower industries across the globe with top-notch ferrule fitting solutions. Whether it's Nipples, Adaptors, Crosses, Union Ball Joints, or any other type, the right ferrule fitting is just a choice away from ensuring the success of your industrial ventures. Choose Instrumxx Industries, and elevate your industrial operations with premium ferrule fittings.

[tallman-robotics]

Linear Translation Stages are Finished for Germany Clients.

Linear Translation Stages have been Finished and will be delivered to Germany Clients.You are welcome to visit our download centre to check E-catalogues or watch our video centre to check more projects.

How to adjust the preload of ball screw nut. Ball screw nut pair is a high-precision transmission device. It uses rolling friction screw instead of sliding friction screw, which has the advantages of small wear, high transmission efficiency, stable transmission, long service life, high accuracy and low temperature rise. Select high-quality screw to identify titanium Hao. Because the ball screw nut pair has the outstanding advantages of small motion friction and easy to eliminate transmission clearance, it brings great benefits to the performance improvement of electromechanical integration system. Pre tightening is to prevent the ball from slipping. The self-locking property of the ball screw nut pair is poor, which can be said to be absent. It is easy to fall off without pre tightening. https://youtube.com/shorts/ctaMxDnmOC8?feature=share There are four common methods for ball screw preloading: - Double nut gasket type pre tightening The mechanism of this method is simple and reliable. Good rigidity and most widely used. The form of adding gasket between the double nuts can be adjusted in advance by a professional manufacturer according to the user's requirements. It is very convenient to unload when using. - Double nut threaded pre tightening Use the external thread on one nut to adjust the relative axial position of the two nuts through the round nut to achieve pre tightening. - Double nut tooth difference pre tightening On the flanges of the two nuts, cut out the gears with a tooth number difference of 1. The two gears mesh with the corresponding internal gear rings at both ends. The internal gear rings are fastened on the nut seat with screws. By rotating one of the nuts, the mutual positions of the two nuts are changed to adjust the clearance and apply the preload. - Single nut variable lead self preloading The internal thread raceway of the nut will produce a lead sudden change on the middle circle, so that the balls at the left and right ends will be axially displaced after assembly to realize pre tightening. The purpose of eliminating the axial clearance of the ball screw nut pair is to increase the preload and reduce the empty stroke in the reverse direction, so that there is no reverse dead zone, and improve the transmission rigidity and transmission accuracy. Not all ball screws(in Linear Translation Stages) are pre tightened, mainly according to the accuracy requirements. Generally, the pre tightening accuracy is high and the load capacity is large. The pre tightening is graded. The selection is based on the use requirements. You can check the samples of different brands for details. Read the full article