#locomotive industry

[mr-kench]

A Greener Future is easier than people think

Theirs something I just remembered: Trains exist

I know that sounds stupid but hear me out. For anyone not from America or spent time in America we’ve severely underutilized and undervalue trains. As I understand it plenty of other countries even in Europe use trains a lot more often. Our tracks are withered and poorly maintained, we’re behind the times when it comes to them, and it’s for a simple but stupid sounding reason. Automobile Lobbyists. Theirs people in the car industry that want cars to be the end all, be all. If you want to travel cross country and don’t want to use a car then you use a bus or a plane and both are extremely overpriced compared to other countries as a result. Theirs clean fuel efficient trains already but most Americans don’t know that and the ones that do have drank the “cars are better” sauce.

Do you realize how environmentally friendly and economically friendly it would be if we started promoting trains again? Plane prices would go down, we’d have to stop spending crap tons of money just to leave the state, tourism would increase and be more accessible. It’s a good thing for literally everyone except the Automotive Industry.

Let this be a call to action to anyone who sees this. Spread the word of you can. Let other people know this information and inform your local government if you happen to be American.

[whirligig-girl]

A mellanoid Advanced Steam tank engine, for use in shunting, industrial shortlines, and branch lines. This particular class has variants designed for burning coal, oil, or biofuels. Note the large covered fuel bunker atop the saddle tank. Like most Advanced Steam locos, it has compound cylinders to expand the steam twice for more efficient operation.

The above loco is pictured with the same livery used by the Slaibsgloth Coal Mine engines, so this might indeed be one of those. However, here are some alternate liveries for fun.

Slorpholk Northern

Railway Series variant.

[dvrknessabides]

Dreamers and Dogs

The Rail Yards, Albuquerque

[grainelevator]

Steam 2-8-2 SY #1676 in Baotou, China, 2008 by Ben Kletzer

The spectacular slag dump at Baotou steelworks as seen with SY #1676. At one time, Baotou had dozens of steam locomotives in daily service, but by this point in 2008 only seven SY 2-8-2's remained. Already most of these steam locomotives were idle every day, while a massive fleet of new diesels served the steelworks. The once bustling steam shop was already barren of equipment and awaiting demolition. But all of this could be forgotten while watching a SY struggle with 1200 tons of molten steel on the slag tip. Within a six months, the steel mill would be fully dieselized and SY 1676 would be nothing more than razor blades.

[allgremlinart]

stop arguing the existence of forklifts in the atla comics under my post you guys. there was an honest to god truck in Day Of Black Sun

[astromechapunk]

Dmitry Osadchy P36 Soviet Steam Train - The General

[kumatajdg]

Once again I've been tasked with creating a railway poster design for a RWS AU! This one's a bit more modern, advertising "Military Industrial" - a munitions factory with rail connection - and featuring the diesel residents Michael the Ruston shunter and David the BR class 52. This was commissioned by www.instagram.com/haraldshead/ to accompany his layout of the same location. Although styled after The Railway Series, there's more than a bit of TUGS influence too! I thought harsher colours would better reflect the industrial atmosphere, but the diesels themselves are friendly fellas! You can see more of them on the layout.

[quartzflammable]

One of my better pictures from the start of the month~ It's always a lovely experience to get behind the scenes of a Heritage Railway, especially when there's work going on to photograph!

Sony A57 // Minolta 28-105

[tubetrading]

Medium voltage support insulator manufacturers in India | radiantenterprises

Elevate your electrical solutions with Radiant Enterprises, a top name among customised insulator manufacturers in India. Specializing in high-quality epoxy insulators, we cater to the specific needs of your projects with precision and expertise. As leading medium voltage support insulator manufacturers in India, we provide durable and reliable products that meet the highest industry standards.

Trust Radiant Enterprises for innovative and customized insulator solutions designed to enhance the performance and safety of your electrical systems.

[imperialchem]

Powering the Future of Railways: A Comprehensive Guide to Connectors for Railway Traction

In the context of global advancements towards sustainable and efficient transportation alternatives, there is a notable resurgence in the prominence of railways.  The utilisation of railways as a primary means of transportation for both passengers and freight is on the rise, mostly due to the advantageous environmental attributes and cost-efficiency associated with this method of transport.  The complex technology that drives modern railway systems is crucial for their performance, with a key element being the connectors employed for railway propulsion.  Reliability you can depend upon.  Elevate your railway systems with premium railway traction connectors manufactured and supplied by Radiant Enterprises - one of the distinguished Railway Traction Connectors manufacturers in India!

This thorough guide aims to provide an in-depth analysis of railway traction connectors, examining their importance, various types, advantages, and potential prospects in the future.  A comprehensive grasp of these connectors is imperative for individuals engaged in the railway sector, as they assume a crucial function in propelling the advancement of trains and cultivating an environmentally friendly transportation infrastructure.

The Importance of Railway Traction Connectors:

This thorough guide aims to provide an in-depth analysis of railway traction connectors, examining their importance, various types, advantages, and potential prospects in the future.  A comprehensive grasp of these connectors is imperative for individuals engaged in the railway sector, as they assume a crucial function in propelling the advancement of trains and cultivating an environmentally friendly transportation infrastructure.

Types of Railway Traction Connectors:

·         Pantographs:

Pantographs represent the prevailing form of connectors employed in electric trains.  The pantographs, located on the train's roof, establish a connection with the overhead wires, facilitating the transfer of electrical power to the train.  Contemporary pantographs are outfitted with advanced sensors and control systems, enabling them to adjust to fluctuating voltage levels and maintain a consistent power provision.

·      Third Rail Collectors:

The utilisation of a third rail as a power source is observed in certain railway systems, where trains derive electrical energy from an additional rail positioned adjacent to the tracks.  Third-rail collectors are dynamic connectors that establish an electrical connection by sliding and making contact with the third rail.  This approach is commonly observed in specific urban transport networks owing to its straightforwardness and economical nature.

Benefits of Advanced Railway Traction Connectors:

·         Enhanced Efficiency:

Contemporary connections utilised in railway traction systems are engineered with the objective of minimising power losses during gearbox, hence leading to enhanced energy efficiency.  The achievement of efficient power transmission results in a decrease in energy consumption and a reduction in operating expenses for railway operators.

·         Reliability and Safety:

The utilisation of premium materials and cutting-edge engineering in the production of connectors guarantees a dependable and secure electrical linkage, hence enhancing reliability and safety.  This improves the dependability and security of railway operations, hence mitigating the likelihood of power disruptions and incidents.

·         Reduced Maintenance:

Connector designs that are more advanced sometimes possess self-cleaning capabilities, hence aiding in the prevention of the accumulation of dirt, debris, and ice on the contact surfaces.  The implementation of this self-cleaning technology results in a reduction in maintenance demands and a decrease in downtime, hence enhancing operational availability.

·         Sustainability:

The utilisation of electric trains, which are fueled by renewable energy sources, plays a substantial role in mitigating greenhouse gas emissions and addressing the issue of climate change.  The utilisation of high-quality traction connectors is of paramount importance in expediting the acceptance and implementation of sustainable transportation systems.

The Future of Railway Traction Connectors:

The ongoing progress of technology will inevitably lead to the further development of railway traction connectors.  Transform railway electrification with the advanced Railway Traction Connectors supplied by Radiant Enterprises.  Request a sample today!

·         Smart Connectivity:

The integration of the Internet of Things (IoT) and Industry 4.0 has led to the expectation that railway traction connectors will contain intelligent functionalities.  The utilisation of real-time data monitoring and analytics has the potential to facilitate predictive maintenance, hence enhancing the efficiency and durability of the connectors.

·         Lightweight and Durable Materials:

The field of material science has the potential to facilitate the creation of connector materials that possess both lightweight properties and exceptional durability.  This may potentially result in a reduction in the overall weight of trains, hence enhancing their energy efficiency.

·         High-Speed Rail:

The global demand for high-speed rail networks is experiencing a notable increase.  In order to facilitate the operation of faster trains while ensuring safety and efficiency, future traction connectors will be required to accommodate elevated levels of voltage and current.

·         Wireless Charging:

Wireless charging technology is now being investigated by researchers as a potential solution for trains.  Potential future connectors have the potential to integrate wireless charging capabilities, hence obviating the necessity for direct physical contact between the train and the power source.

Final Thoughts:

The railway industry is positioned to assume a crucial role in influencing the trajectory of sustainable transport in the future.  In order to realise this vision, the utilisation of modern technology, such as railway traction connectors, will play a pivotal role.  As we progress, allocating resources towards research and development in order to create inventive and dependable connector solutions will not only propel the future of railway systems but also make a significant contribution towards a more environmentally friendly and efficient global landscape.  The ongoing advancement of connector technology holds promise for the development of a more environmentally sustainable and interconnected railway system that will benefit future generations.  Explore the optimal solution for your railway projects.  Explore a diverse range of railway traction connectors offered by Radiant Enterprises - one of the trusted Railway Traction Connectors manufacturers in India!

[davideragland]

Just a little locomotion for the morning. Looks like this switching engine has changed hands a few times. #locomotive #locomotives

[grainelevator]

Union Pacific 4-8-8-4 "Big Boy" #4001 takes on fuel at the small coaling tower in West Harriman, Wyoming on September 5, 1956. Source

[automotiveamerican]

Raymond Loewy, Impact on Industrial Design

Raymond Loewy, a renowned industrial designer, made significant contributions to car design in the mid-20th century. He is known for his streamlined, futuristic approach. One of his notable works is the Studebaker Starliner and Starlight coupes from the early 1950s, featuring sleek lines and a distinctive bullet-nose front. Loewy’s designs emphasized aerodynamics and a sense of motion,…

[mikopol]

A fanart fore "A Slice of Sea", a small adventure game, which brought me a lot of fun. Almost everything in game was made by one person: Mateusz Skutnik, who is experienced comic book artist. Really worth checkin' !

[joshuahollandphoto]

[thinkbolt]

Big Tim (UPA, 1949) - dir. Robert Cannon - ft. Stan Freberg - industrial film for Timken Roller Bearings