#mod 5.4

[askthebadkidz]

Here are the first, second, and third results of our polls for the Bad Kids + Baron orientation (Kristen not included because She’s just a lesbian canonically)

Adaine:

First: She’s just Adaine (44.2% of 292)

Second: Queer (13.7% of 292)

Third: Aspec (2 or more identities) (12.3% of 292)

shoutout to the two people who said Biromantic Demisexual. I don’t know if you were actually the same person but it’s funny to me either way.

Fig:

First: Bi (34.8% of 299)

Second: She’s just Fig (29.4% of 299)

Third: Pan (16.4% of 299)

Most comments on this one either agreed she was Bi it that she was just Fig. Amazing, 0 notes.

Fabian:

First: Bi (33.9% of 239)

Second: ‘I only know that there is something wrong with him’ (17.6% of 239)

Third: He doesn’t know (13.4% of 239)

Most people agreed it was a combination of the above, but shout out the the person who headcannons him as straight because it’s funny.

Gorgug:

First: He doesn’t realize he’s supposed to care (35.1% of 291)

Second: There is no way he knows (31.3% of 291)

Third: Bi (19.9% of 291)

Literally amazing. Everyone agreed that he either doesn’t know or doesn’t care even if they headcannoned him as something else. He has more important shit to worry about.

Riz:

First: Aroace (of course) (65.6% of 314)

Second: some other kind of aspec (9.6% of 314)

Third : Three way tie between ‘He is so scared’, ‘What would make him into the sexy rat’, and ‘alloace’ (5.4% of 314)

I honestly don’t know why we put Riz on this polls? He’s obviously aroace, but we were very tired when we made these.

Baron:

First: They only love Riz and they are only capable of loving Riz (52.7% of 237)

Second: they’re whatever Riz is but worse (13.5% of 237)

Third: Two way tie between ‘I think they have a disorder of some kind. Something went wrong here’ and ‘I think they’d actually be, at least, aphobic’ (9.3% of 237)

I knew the first option here was gonna win but I’m honestly surprised the disorder one is even in third place. Congrats Baron, some people think you have a some kind of brain problem.

-Mod Fig

[inlovewithaspiderguy]

My sister showed me her minetest world she’s on 5.11 and I’m on 5.4 and I kind of cried a little seeing all the stuff she has that I’m supposed to replace with mods so I’m on my way to update my shit right now

[threetrollsandadryad]

Timelapse of territorial control over 20 rounds in an ongoing Medieval 2 Total War hotseat campaign. Every 100 milliseconds represents one player turn, with all AI and admin-controlled NPC factions grouped at the end of each round.

Mod played: Rise of Three Kingdoms version 5.4

[estrellka-chipsa]

5.4 Training ground

Lot size: 20x20

remade from lot. Gallery ID: PopeAyla

CC from: lady-moriel, Zx-Tagada, Medieval Sim Tailor & Carpenter [simverses]

Used Object from Mods (it’s not obligatory) - not included in pack!!!!!:

JS_Archery + RUS Origamika

DOWNLOAD: Boosty | Patreon | Google Drive

[pikselog]

Xbox taşınabilir el konsolları ROG Xbox Ally serisini duyurdu

https://pikselog.com Microsoft, taşınabilir oyun pazarında ciddi bir adım atarak ASUS ile ortaklaşa geliştirilen iki yeni el konsolunu tanıttı: ROG Xbox Ally ve ROG Xbox Ally X. Bu cihazlar, Xbox’un gücünü Windows’un özgürlüğüyle birleştiriyor. Her iki model de 2025 tatil döneminde seçili pazarlarda satışa sunulacak. Ön sipariş, fiyat ve aksesuar bilgileri ise ilerleyen dönemde açıklanacak. https://www.youtube.com/watch?v=FIVmyOIV1MQ Xbox ekibi, son yıllarda “her yerde oyun” vizyonuyla Play Anywhere, Game Pass, Xbox Cloud Gaming (Beta) ve Remote Play gibi hizmetleri öne çıkarmıştı. Şimdi ise, ASUS ile birlikte teknik bilgi ve deneyimlerini bir araya getirerek, ROG Xbox Ally ve ROG Xbox Ally X ile bu vizyonu fiziksel cihaza dönüştürdüler. Oyuncular, Xbox, Battle.net ve diğer popüler PC mağazalarındaki oyunlara artık tek bir cihazdan ulaşabilecek. ROG Xbox Ally, giriş seviyesinde, uygun fiyatlı ve her oyuncuya hitap eden bir model olarak sunulurken; ROG Xbox Ally X, üst düzey performans isteyenlere yönelik olarak tasarlandı. Her iki el konsolu da ister yerel ister bulut üzerinden ya da başka bir odadaki Xbox konsoluyla uzaktan oyun oynamayı destekliyor. Windows 11 ile çalışan cihazlarda, Xbox için özel geliştirilmiş tam ekran arayüz, kolaylaştırılmış Game Bar ve Armoury Crate entegrasyonu gibi özellikler öne çıkıyor. Oyunlar ve uygulamalar arasında geçiş, sohbet, ayar yönetimi ve kütüphane erişimi doğrudan cihaz üzerinden, kontrolcü ile rahatça yapılabiliyor. Ayrıca cihazlar Discord, Twitch ve mod desteğiyle PC oyun özgürlüğünü de koruyor. Teknik açıdan; ROG Xbox Ally: AMD Ryzen Z2 A işlemci, 16GB RAM, 512GB SSD, 7” FHD 120Hz ekran, 60Wh pil, 670g ağırlık. ROG Xbox Ally X: AMD Ryzen AI Z2 Extreme işlemci, 24GB RAM, 1TB SSD, 7” FHD 120Hz ekran, 80Wh pil, 715g ağırlık, Thunderbolt 4 destekli bağlantı noktası. Her iki cihaz da Wi-Fi 6E, Bluetooth 5.4, ergonomik Xbox tarzı tutuş, hızlı geçiş tuşları ve geniş aksesuar desteği sunuyor. Game Pass üyeleri yüzlerce oyuna doğrudan erişebiliyor. Ayrıca, cihazlar Play Anywhere desteği ile satın alınan oyunları Xbox konsolda, PC’de ve el konsolunda ortak ilerlemeyle oynama imkânı tanıyor. ROG Xbox Ally ve Ally X, yıl sonunda Türkiye dahil birçok ülkede piyasaya çıkacak. Ön sipariş ve fiyat detayları yakında paylaşılacak. Xbox ve ASUS, el konsolları pazarında yeni bir dönemi başlatmayı hedefliyor.    ROG Xbox Ally  ROG Xbox Ally X  İşletim SistemiWindows 11 Home  Windows 11 Home  GamepadXbox Kablosuz Kumandalarından ilham alan ergonomik tutuş, tüm gün boyunca konfor sağlıyor. ABXY tuşları / yön tuşları (D-pad) / L & R Hall Effect analog tetikler / L & R bumper tuşları / Xbox tuşu / Görünüm (View) tuşu / Menü tuşu / Komut Merkezi tuşu / Kütüphane tuşu / 2 adet atanabilir arka tuş / 2 adet tam boy analog çubuk / HD titreşim / 6 eksenli IMU sensörüXbox Kablosuz Kumandalarından ilham alan ergonomik tutuş, tüm gün konfor sunuyor; gelişmiş kontrol için impulse tetikleyicilerle (titreşimli tetik) tamamlanıyor. ABXY tuşları / yön tuşları (D-pad) / L & R impulse tetikler / L & R bumper tuşları / Xbox tuşu / Görünüm (View) tuşu / Menü tuşu / Komut Merkezi tuşu / Kütüphane tuşu / 2 adet atanabilir arka tuş / 2 adet tam boy analog çubuk / HD titreşim / 6 eksenli IMU sensörüİşlemciAMD Ryzen™ Z2 A Processor  AMD Ryzen™ AI Z2 Extreme Processor  RAM16GB LPDDR5X-6400  24GB LPDDR5X-8000  Hafıza 512GB M.2 2280 SSD for easier upgrade  1TB M.2 2280 SSD for easier upgrade  Ekran 7” FHD (1080p) IPS, 500 nits, 16:9   120Hz refresh rate   FreeSync Premium   Corning Gorilla Glass Victus + DXC Anti-Reflection 7” FHD (1080p) IPS, 500 nits, 16:9   120Hz refresh rate   FreeSync Premium   Corning Gorilla Glass Victus + DXC Anti-Reflection I/O Portları2x USB 3.2 Gen 2 Type-C with DisplayPort™ 2.1 / Power Delivery 3.0  1x USB4 Type-C with DisplayPort™ 2.1 / Power Delivery 3.0, Thunderbolt™ 4 compatible  1x UHS-II microSD card reader (supports SD, SDXC and SDHC)  1x USB 3.2 Gen 2 Type-C with DisplayPort™ 2.

1 / Power Delivery 3.0  1x 3.5mm Combo Audio Jack  1x UHS-II microSD card reader (supports SD, SDXC and SDHC; UHS-I with DDR200 mode)     1x 3.5mm Combo Audio Jack  Ağ ve İletişimWi-Fi 6E (2 x 2) + Bluetooth 5.4  Wi-Fi 6E (2 x 2) + Bluetooth 5.4  Boyut 290.8*121.5*50.7mm  290.8*121.5*50.7mm  670g  715g  Batarya60Wh  80Wh  İçindekiler ROG Xbox Ally  65W charger  Stand  ROG Xbox Ally X  65W charger  Stand  

[secretindicator]

forex non repaint scalping indicatorS

1. Introduction

https://secretindicator.com/product/forex-gold-m5-non-repaint-mt4-indicator/

TELEGRAM CHANNEL

Scalping in the Forex market involves making multiple trades throughout the day with the aim of capturing small price movements. Since decisions must be made quickly, traders need reliable, real-time indicators. One of the key concerns for scalpers is the issue of repainting, which can distort trade signals. This is where non-repaint indicators come into play — offering consistent, dependable signals without changing after the fact.

This guide explores the best non-repaint scalping indicators and how to use them for profitable and efficient trading.

2. Understanding Repainting in Forex Indicators

Repainting means that an indicator changes its values after a candle has closed. This is especially common in indicators based on future data or moving averages recalculated with each new tick. While repainting can make past signals look “perfect,” it provides misleading results in live trading.

Example:

A repainting indicator may show a buy signal at a candle's close, but later the signal disappears or shifts if the market moves differently.

Non-repaint indicators, on the other hand, lock in their values at the candle’s close and never change afterward.

3. The Importance of Non-Repaint Indicators in Scalping

Scalping requires rapid execution, often within 1 to 15-minute timeframes. A trader cannot afford to second-guess signals or rely on false setups. Non-repaint indicators:

Improve confidence in entries and exits.

Provide consistent backtesting results.

Reduce psychological stress by avoiding unexpected signal changes.

4. Characteristics of a Good Non-Repaint Scalping Indicator

A reliable non-repaint indicator for scalping should:

Lock signals at candle close.

Have minimal lag.

Offer clear buy/sell indications.

Work well on lower timeframes (M1–M15).

Be compatible with popular platforms like MetaTrader 4/5 or TradingView.

5. Top Non-Repaint Scalping Indicators

5.1 Supertrend (Non-Repaint Version)

Supertrend is a trend-following indicator that uses ATR (Average True Range) and price to generate buy and sell signals.

How it works: Turns green for buy, red for sell.

Scalping Tip: Use on M5 with confirmation from RSI.

Non-repaint version: There are specially coded versions that do not change once a candle is closed.

5.2 Heiken Ashi Smoothed (Non-Repaint Version)

Heiken Ashi Smoothed filters out noise by averaging price action.

Use: Identifies trend continuation or reversal.

Scalping Tip: Best with moving average filters to spot micro-trends.

Non-Repaint: Once a bar is closed, it does not change.

5.3 TMA (Triangular Moving Average) Non-Repaint

Standard TMA indicators repaint, but there are versions coded specifically to avoid this.

Use: Fades in and out of zones for support/resistance.

Scalping Tip: Enter when price moves outside TMA bands and reverses back in.

Caution: Always verify that it’s a true non-repaint version.

5.4 RSI + MACD Combo

Both Relative Strength Index (RSI) and Moving Average Convergence Divergence (MACD) can be used in tandem.

Non-Repaint Versions: Standard RSI and MACD do not repaint as long as they are not modified with future values.

Strategy:

RSI > 70 = overbought; < 30 = oversold.

MACD crossover confirms momentum.

Scalping Tip: Use on M5 with price action confirmation.

5.5 QQE MOD (Quantitative Qualitative Estimation)

A modified RSI-based indicator that provides smoother signals and better accuracy.

Benefits: Easy to read, reliable, low lag.

Non-repaint version: QQE MOD coded specifically for scalping without repainting.

Scalping Tip: Look for crossovers above/below center line.

5.6 Buy/Sell Arrows Indicator (Custom Non-Repaint)

Many developers create custom MT4/MT5 indicators with visual arrows.

Tip: Ensure they are coded to finalize signals after candle close.

Use: Simple visual cues for rapid decision-making.

Strategy: Combine with stochastic oscillator or volume filters.

6. Best Practices for Using Non-Repaint Indicators in Scalping

Wait for Candle Close: Even non-repaint indicators may flash during the candle formation. Wait for confirmation.

Use Stop Loss: Due to high leverage and volatility, always manage risk.

Backtest Before Live Trading: Verify results over historical data.

Avoid Overloading Chart: Stick to 2–3 indicators max.

7. Combining Multiple Non-Repaint Indicators

For better accuracy, combine indicators that measure different aspects:

Trend + Momentum + Entry Signal

Example Combo:

Supertrend (trend)

QQE MOD (momentum)

Arrow Signal (entry/exit)

This multi-dimensional approach reduces false signals.

8. Chart Timeframes for Scalping

Non-repaint indicators work best when matched to appropriate timeframes:

M1: High noise, very fast trades.

M5: Balanced speed and signal quality.

M15: More reliable trends but fewer setups.

Pro Tip:

If you’re a beginner, start with M5 to get familiar with setups without the lightning speed required on M1.

9. Common Mistakes Traders Make

Overtrading: Taking every signal without confirmation.

No Risk Management: Not using SL/TP orders.

Blind Trust: Assuming “non-repaint” means 100% accuracy.

Ignoring Spread/Slippage: Especially on low timeframes.

Failing to Test Indicators: Many free indicators online are mislabeled as non-repaint.

10. Pros and Cons of Non-Repaint Scalping Indicators

Pros:

Predictable behavior

Useful for algorithmic strategies

Ideal for systematic scalping

Reliable backtest data

Cons:

Still not immune to false signals

Many fake versions in online forums

Require fast execution and focus

11. Myths and Misconceptions

MythTruthAll repainting indicators are uselessSome repainting tools like ZigZag are good for analysis, not live signals.Non-repaint means perfect accuracyThey reduce confusion, not eliminate risk.You can scalp without risk using indicatorsRisk is always present. Proper management is key.

12. Choosing the Right Broker and Platform

To use non-repaint indicators effectively:

Platform: MT4/MT5 or TradingView recommended.

Broker: Look for low spread, fast execution, and no dealing desk (ECN preferred).

Execution Speed: Essential for scalping.

Tools Support: Ensure the platform supports custom indicators.

13. Conclusion

Non-repaint scalping indicators are a powerful asset in a trader’s toolbox. While no indicator guarantees profit, using tools that lock in signals and avoid misleading changes gives scalpers an edge. The key is to combine these tools wisely, test strategies thoroughly, and maintain discipline in execution.

Scalping is a high-intensity trading style that rewards preparation and precision. By mastering non-repaint indicators like Supertrend, QQE MOD, and custom arrow signals, traders can sharpen their entries and reduce risk from signal whiplash. Always remember: indicators are guides, not oracles. Pair them with solid price action understanding and risk management for the best results.

https://secretindicator.com/product/forex-gold-m5-non-repaint-mt4-indicator/

[citylifenewstw]

火鍋界米其林廠商華昇食品宣布重磅消息 將在三月於知名便利商店上市 城市生活報 | 桃竹苗特派員 傅秉祥 採訪編輯報導 | 2025.01.10 | 城市生活報 http://www.citylifenews.net 報導內文 https://www.citylifenews.net/portal.php?mod=view&aid=1383

2025年伊始，台灣第一家日式專業魚漿煉製品製造公司，被譽為「火鍋界米其林」的華昇食品宣布重磅消息，該公司與日本合作歷經數月研發的「明太子蟹味棒」，將在今年三月於全台擁有4,500餘家便利商店的知名超商上市，此舉是華昇食品在各大連鎖超商、超市販售火鍋料、關東煮後，首次轉型跨入「即食區」領域，為了解此家火鍋料隱形冠軍現況，記者特走訪總經理許惠淩，記要如下。

問:貴公司生產的產品共有哪些?

答:目前共有30幾種產品，主要項目區分為「日本魚板系列」包括:盒裝白大板(KAMABOKO)、白大板、紅大板，及切片魚板:紅花伊達、小浣熊、鳴戶卷、鮮食蟳絲等。「日式火鍋料」品項計有:炙燒起司丸、魚包蛋、海膽風味包、芥末飛魚卵、青醬海鮮包、四川小辣包、龍蝦風味丸、姬路城蝦球、姬路城魚卵卷等。「關東煮」系列包括:魚豆腐、蟹味星星燒、海鮮魚卵卷。「御蛋品」系列則有:虎皮海苔玉子燒、玉子燒、錦絲等，所有產品線都通過SGS22000、SGS45001及HACCP等食品類安全管理暨職業安全健康管理系統認證，讓消費者吃得安心無虞。

問:請談一下貴公司研發的新產品內容?

答:今年三月即將交給另一家大型連鎖超商販售的「明太子蟹味棒」體積較一般大(60克)，卡路里81.9卡、蛋白質高達5.4克，內餡加了日本的助宗鱈明太子，冷、熱食皆宜。此產品設計得比一般蟹肉棒大的主因之一是希望成為聚會的人氣配角，可以邊喝酒邊享用這支份量十足，一口咬下去鮮韌多汁的蟹肉棒大飽口福；同時低卡路里、高蛋白也是瘦身、健身族群的最佳選擇。原本採用人工包裝方式，受限於手工每日產量僅能生產7,000支，後來才引進自動化包裝設備，將日產能大幅提升到21,000支，並陸續進行口味改良，終能在三月於全家超商販售，可以說是我們第三代交棒後交出品牌創新的成績單。

問:貴公司產品和一般火鍋料有何區別?特色又有哪些?

答:公司從我爺爺第一代1973年成立迄今，50多年來始終以日語「味自慢」(很驕傲的味��)做為我們的產品宗旨，將日本風情結合台灣在地美味製作出一系列火鍋配料，在歷經消費者長期品嚐肯定後，被讚許為「火鍋界米其林」，對我們來說是至高無上的榮譽。我們也衷心期望，將台灣火鍋料精緻化，從傳統市場走進超市，從台灣推廣到全世界；更讓人驕傲的是，當初從日本學的技術，如今我們產品也外銷到日本。單以「炙燒起司」為例，此產品的起司是來自荷蘭、愛爾蘭、英國、阿根廷等產地，起司成本相當高，堪稱頂級火鍋料，消費者吃入口便可立即感受到起司的濃郁香味!另外「四川小辣包」的內餡也如同四川道地椒麻原味呈現，保證讓消費者辣得過癮。另一項「青醬海鮮包」也是以青醬為餡，讓消費者入口立可感受到義大利麵青醬的滋味；除此芥末飛魚卵、海膽風味包、小籠包魚旦..每一項產品都有其特色，保證讓消費者吃得過癮、讚不絕口。

[tf2aaa-batteries]

MOD HERE IMA EXPLAIN A BIT

Figured I'd tell abt it, the AAA trio DO have Blu Counterparts; Blu Ingeborg is a bit shorter (5.4), probably younger in age, and unlike the Red Ingeborg (who had been living with her dad as he worked, she got to see what he does for a living for a long time), Blu Ingeborg only recently got into the line of work her father does and is a bit naive and a lil too excited to cut people open (Red Ingeborg had lost any excitement long ago and is a bit disconnected from it) Blu Apprentice is taller (5 foot even), acts a bit older then the red apprentice, and is better at what they do. The only real bad downside is that they're predictable with class mimicking, unlike the Red Apprentice, who's a bit more unpredictable, and runs off of fear and fight or flight instinct. They also came with the Blu Heavy from the USSR, although they have a bit more muscle to back up fighting. Blu Cloak is much more distant to everyone, most people dont know what he sounds like either, Red Cloak is at least willing to interact with others. Blu Cloak and Blu Engie have a strict uncle-nephew relationship, while the Red counterparts have more of a father-son relationship (with a smidge of uncle-nephew cause we love that family trauma.)

[the-firebird69]

We made a kit it is a perfected kid for a high-end speed kit for a 125cc Grom that's the largest CC drum you can buy and yes in some states it will still be a scooter with these modifications included

We have included all the basics he discussed but we're going to make the list here and we'll start with removing the cowl

Adding a spirited small race cow that goes only around the light and has a short windshield two to three inches high and we know how high it is

Adding a new sprockets front and rear with the complete kit to install it including lock type and this is the high performance lock type

Adding the new rims hubs spokes tires and it comes as an assembly you just unbolt yours roll it off roll these on and bolt it up with the same bolt that you have with your tire and rims

The added links for the chain that standard with the Grom

The cooling jacket for the engine and it's not necessary to cool the transmission if you cool the engine

A full instructions on how to install everything and modify everything including lowering the suspension and in some case we include rains to lower it so it stays lowered

We added a different seat it doesn't work right when it's lowered and you need to and you need to lower it to go faster

The tires in this particular kit are low profile so the rims are wider well taller not wider and it's diameter we're talking about they're about 18 and a half inch diameter and the low profile tires about an inch and a half it goes faster and he's right it makes a difference and at high speeds it makes a big difference it's easier to control

These are high-speed high performance tires and they're made to go in water as well and they perform well

And we include a Carter exhaust it's kirker and it's not Carter and it is very high performance it has about 10 mph or 1 horsepower and at high speeds it makes a big difference and yeah he added that in later it's important though and the cowl is high strength so it doesn't move

We have a couple things that other kids don't we change the speedometer to mechanical and you do get the new hub that has the speedometer attachment in the front and the new hub comes with the new disc and your old brake system should work fine it fits the thickness and width of the disc and the mounting is the same

These kids are classy we go through it with each model that was made each year to make sure that it matches up we also have customer service if you have a problem call in and we'll give you a hand they're not cheap they're not really pricey but they do add value and we'll go over the statistics now

Top speed with all the modifications for the brand new 2024 Honda Grom 125CC is 235 mph with 135 lb person riding with the proper gear meeting a tight fitting leather jacket and a form fitted DOT approved high speed helmet and proper pants and shoes that do not flap

0 to 60 in 3.4 seconds and is an increase of about 0.6 seconds

The quarter mile in about 5.4 seconds that is extremely fast and you should see his face he can't believe it that's so fast you can't believe it you're down the road 2 seconds later after 0.60 and it's true

We made these mods to some of our bikes and it was to check out to see how they worked and just make sure it did work and we are going with it but I want to tell you this kid to put years into this work and he hasn't gotten paid anything. I agree with his request those who feel like donating are to do so we have a website up and the girls donated right away after they made the website and he doesn't know what the website is or where it is and it's not going to look for it he says I'm going to try and get him stuff and it's a way to get support and he wanted to show us people support him and his ideas and they do help he would get one of these if he could and he might there are so many a city he was shot this is his idea is to make a motorcycle scooter and we're modifying things and he worked with Bob Brown Jr on the hard knock kicker 5150 and Hera helped us with the chopper shop because he was out of commission kind of and I can't believe it she was doing the work they together are pretty awesome they also made some things that are horrible but we see why and these guys are in trouble the phone is going to try and take over and they're going to have a hard time but this bike will help us and for now it's the greatest there are so many a city I called around there's so many we have to get out there and buy them I'm sending people out with money cash and trucks pick up trucks trailers anything you got semi trailers double semis flatbeds I don't care what the hell it is a dump truck get out there and buy these damn things if you see them for sale I want all of the ones we can buy in tonight and I'm paying cash money

Trump

I have leads on a few but I am going to modify them and hopefully I can get one to him and dirt cheap too they're selling them dirt cheap

Ken it's about half the cost in the store now it's a third or less and some of them are old they sell them for a lot less I know how to modify them this is going to be great I can get two of them and sell to a real cheap and older one he laughs if I can get permission to ride one might not happen so I do see that but I'm going to try it

We appreciate the input but we got to get it out there Trump we have to get out there now Dave

You like all this but we got to get out there Olympus we do Hera it's going to go on and on Frank Castle hardcastle no it won't Duke and Blockbuster Duke nukem

[powerrcp-g3]

Greetings, BeamNG and Automation enjoyers. Today, I have finished yet another overdue mod. The Fung-Gavril Honrtail GT1 LM. It's not based on any GT1 car in particular. It's just what it would be like if Gavril entered Le Mans in the GT1 class. This car uses a variant of the Gavril "Thunder Dragon"  V16 engine known as the "Baby Dragon" which had been reduced to 5.4 litres due to GT1 regulations. So yeah, I finally finished this mod and I posted it on the BeamnNG repository. 

Here's the link to the mod if you want to see it. https://www.beamng.com/resources/1997-1998-fung-gavril-horntail-gt1.27442/

[teddypoi-qd]

whoops, missed this poll ending! here's the answer breakdown:

called a member of staff by accident - 2.2% i'm not surprised this one was least voted! I think the Asterisk Incident was the most popularised Whoopsie of the ARG. TL;DR - A phoneline for the OIAR was being run by RQ during the game. Our first time encountering it, someone pressed * on the voicemail it gave us, which very much got us into the actual real setup of the number. Including test voicemails. That had a RQ member's real phone number on. Before realising this was the backrooms, this person did call Martyn RustyQuill (a real man) and have a very awkward, confused conversation.

went to a german bookstore's back area looking for a clue - 5.4% this one's real! our Berlin on-location team tracked a clue down to a bookshop in the area, and went in searching for a clue! rather than finding the intended clue (a fake newspaper with a lot of leads), our team started by going into a staff-only area. whoopsie!

started a ship with a semi-obscure British TV mascot - 7% man who do you think we are of course this one is real. discovering Bonzo led to a lot of non-UK ARG players learning about Mr Blobby for the first time in their lives. A discovery I'm sure they could have gone without. Alas, the curse spreads, and Mr Blobby and Mr Bonzo are kissing on the mouth. #Blonzo forever.

broke a protonmail account - 9.7% please do not underestimate the power of several hundred ARG players. we recieved a login for a protonmail account and all swiftly said, "oh i've got a great idea!" and logged in. that many logins and setting changes from that many locations at once? bricked it <3 we got locked out and had to get a secondary email from RQ so we didn't softlock the entire ARG.

got the first canon appearance of a MAGverse character - 17.2% this one's real too :)

bonzo! bonzo!! bonzo!!!

contacted a GDR diaspora site looking for a clue - 23.7% we did NOT do this one. the idea was discussed, but this was pretty early on, and we decided that if we had to do something like this, it'd be more clearly signposted. i admit to being somewhat tricksy here, though, because there was an entire fake forum of GDR diaspora characters that we trawled through for DAYS. it was written entirely in german and the team translated it TIRELESSLY.

nearly got recruited into scientology looking for a clue - 34.9% yeah... so one of our Manchester on-loc teams went to the site of TMP's Magnus Institute. Turns out that it was a hub for Scientologists. They talked to the team. The server's mods had a nervous breakdown. No one got scientologied tho. Just about.

alrighty then, it's been a second since it finished...

who was paying attention?

[dailyjake-english]

bad parent

[whitherliliesbloom]

There’s no rest for the righteous, as the famous saying goes. After successfully transporting the scions back to their original bodies in the Source, the Warrior of Light gets a wardrobe change in preparation and surprisingly, anticipation for her next battles ahead. 

Tsukuyomi’s moonlit cane

The tsukuyomi cane that saw Illya through many battles in Norvrandt is now fully imbued with the power of the moon from the First, brightly glowing in a red and purple hue while also emitting golden star-like glitters from the crescent tope of the cane.

Hip length hair

“When are you ever going to cut your hair short, Illya? That length must not be practical at all.” “Oh, the day I stop fighting, perhaps.”

T’would seem that Illya has grown not only in her confidence but verbal wit. 

Hair ribbon

The very same ribbon she wore during the events of Shadowbringers, a more feminine version of a crown befitting of the Warrior of Darkness. Much like her cane, she’s using it on her person out of pure sentimental value. 

Coat and shorts

When G’raha Tia joined the Scions now dressed in a full set of adventurer gear, Illya too updated her set of clothes to suit more rigorous activities. After all, she’s bound for limitless new adventures with her new companion and reunited found family. 

Boots and fingerless glove

We love a queen who is ready for action. 

Confident smile and gait

Mor Dhona has never seen the Warrior of Light smile as radiantly and confidently in the past as she has now. It’s plain to see just how much the once jittery, inexperienced and nervous rookie adventurer has grown into a fine exemplar of a heroine. 

[allmoddedapk]

Franchise Hockey 2021 Mod 5.7.6 Apk [Unlimited Money]

New Post has been published on https://www.allmoddedapk.com/franchise-hockey-2021-mod-apk/

Franchise Hockey 2021 Mod 5.7.6 Apk [Unlimited Money]

Franchise Hockey 2021 5.7.6 Mod Apk [Unlimited Money]

Drop the gloves and play the world’s best mobile hockey manager game! Take over the front office and build a squad of All-Stars and Hall-of-Famers into the next great puck dynasty.

Play Every Day

Get your boys onto the ice every single day. Play full seasons, exhibitions, pro games, and showdowns! Earn rewards and draft packs through daily game play and use those resources to continue to build your franchise.

Build a Champion

Manage your hockey club and build them into a championship contender. Put together an all-pro roster, customize your lines, play seasons and bring home the Franchise Cup!

Build the Ultimate Team

Unwrap packs and fill your lines with the biggest names in NHL history. Collect Special Edition, Limited Edition and Legend versions of your favorite players to unlock their Ultimate Players – the highest rated hockey players in mobile gaming!

Step onto the ice and play the mobile hockey game that always puts the biscuit in the basket!

[solkat-edits]

woah a pq sprite edit tutorial ft. mod kk (paint tool SAI)

MOD KK....: SO UH. this is primarily to help a pal of mine, but like i thought it’d be good to make a post / tutorial in general, so here’s a tutorial which features the process of how i did this dave

since i use sai, this is a tutorial mainly for sai, but you can follow along easily on other art programs since functions are similar and etc. the link to the sai i use can be found here. 

tutorial starts under the read more: 

BEFORE WE START, any sai users, here are my brush settings regarding lineart / linking, and in general, these are the settings I use for all my art and edits. Size wise, I usually draw with 1, but for line width, I’ll change between 1, 0.8, and 1.5.

1. So first and foremost (wow, look the way I’m typing got more formal), you want to open the sprite you want to edit on. Here I have Dave. A good resource for sprites / assets from PQ is from this blog, in case any one needs it. 

2. If you need to, make edits to the base. Usually, if not the hair, I’ll make an edit to the character’s shading colour or their face. In this instance, it’s going to be the latter. So in this picture, what you want to do is colour pick from his skin, make a new layer and on that layer,  you’ll ‘erase’ (draw over) his expression. 

2.1. Lower the opacity on the coloured over layer so that you can see his original expression- mainly I do this so I can see the proper placement of his facial features and such. Here, I’ll sketch the change I want. 

2.2. After it’s sketched out, I’ll line it proper and fill it in, and now he’s like smug (shame that it gets covered up by his bangs in the finished edit).

3. Now we’re to the fun part! Well, onto the more fun parts. Here is where we’ll start our sketching. Sketching isn’t mandatory, especially on smaller, minor edits such as changing shirt colours or adding small accessories, but if you want do things like drastically change their haircut, or to give them a new outfit entirely, sketching is probably a good idea. Anyways, lower the base’s opacity, and then  decide what kind of outfit you want to sketch on your base, and do it. 

4. After sketching, you’re gonna line! Lower the opacity on both the base and the sketch- though that’s probably a given. Completely optional, but I tend to put my layers in a folder set for organisation purposes. Also, please name your layers, it’ll help you good (OKAY SO LMAO. I forgot to take the screenshot of me mid lining, so I eyeballed all my finished lines out to make it look like it was incomplete.)

4.1: Anyways, yay! The lining’s complete. I know this is supposed to be a tutorial, but process photos are fun too. 

5. Now we’re onto pre colouring. I say pre colouring because this is like setting the base for colouring? Yeah. Anyways, I’ve made another folder set for colouring, pulled the base sprite into it, and then set a coloured background under the base for transparency and etc- I usually go with a colour which will contrast the piece’s main palette, which in this case, is blacks and shades of red. 

5.1. Now we’re going to put the base colour into the newly created lineart. What we’ll do here is turn the transparency on the base sprite down till it’s completely gone, and then we select every inside of the lineart.

5.2: With the base ‘white’ (the greyish white) colour from Dave’s original sprite, we’ll fill the lineart. 

5.3 However, after this, you’re going to want to check your transparency because it won’t always be perfect- actually, it won’t be perfect. Usually, you’ll get that small,  shitty white outline which overall imo ruins the piece when it’s transparent. 

5.4. What you’re going to want to do to rid of this, is- going back to 5.2, after you’ve filled it, and you still have the selection on, you’re going to reverse the selection (arrow pointing to it, ‘pologies for non sai users because I don’t know the equivalent), and then erase. It’ll seem like you’re just erasing the background, but I swear it’s worth it. 

5.5 See? Now it’s clean. Yay!!!

5.6 After that’s figured out, you’re going to want to redirect your attention back to the base sprite, and then erase all the shit that’s leftover from it, such as Dave’s sleeve which is poking out from the side, as shown in the pic. 

5.7 Bam. And now he’s all cleaned up proper and ready to roll. 

5.8 A completely optional step, but my favourite since I love lining. What I usually do, so that the lines look smooth(er), and more precise with the style, is that I ink it a bit to create line width variation in certain parts of the sprite, and also to create shadows.

6. Finally on colouring- I’m probably numbering all this shit wrong, but you know what, I sucked at math. Anyways, colouring- figure out your palette, and basically base colour parts of your sprite. The blackish part on the shirt is an airbrush texture. 

6.1. Tip: If you’re using dark greys or blacks, I’d recommend just picking the exact shades from other PQ sprites so they’re all??? Idk, the same? To put it simply??? Yeah. 

6.2. Shading is- another probably basic thing, but I’m explaining my particular process, but how I go about shading is by making a clipping layer over the layer I’m currently shading on to ensure that it only colours on that part. Then, I put it on multiply, and then toggle around till I get a good mid shade. To each their own, however, these are just my tips and tricks that I use personally. 

6.3. And after you’ve shaded your entire piece, you’re done! Yay, he’s edgy now! 

6.4. Though I did make my end sprite with a texture, and for SAI users, it’s relatively easy. Just open the png file of your sprite so that all your layers are in one and it’s a happy pic, and then go to to the textures drop down menu and select your texture. For this, I decide to use the grunge texture. I also used this texture on my Derse Prince edit, and I used a TV screen texture on one of my Hal edits. I don’t know if texture packs come with other art programs, but if they do, just experiment and see what you like! It’s not obligatory, but it’s a nice touch for some edits. 

Other than that! We’re finished! I hope you enjoyed- apologies if anything said was over complicated haha ;;. 

[darkelfguy]

10 years in the making, Morrowind Rebirth is an ever evolving world, bringing new life to the lands of Morrowind, reshaping cities, and changing the game as never before! This isn't the Morrowind you knew before, but a world renewed, alien yet still familiar, full of new adventures, new dungeons for you to delve into, new areas for you to explore, and new artifacts for you to discover! One of the largest mods for Morrowind, today Rebirth is even larger with the epic 5.4 release, adding major new overhauls, tons of new items, and numerous graphical improvements to make for an even better Morrowind playing experience! You can download Morrowind Rebirth 5.4 today from ModDB and the Nexus! Additional Mods Used in this Trailer: Riders Enhanced Water Shader for MGE XE Skies IV STEP Shaders Compilation MCAR Weapon Sheathing Aesthesia Groundcover - Grass Mod