#tiny camera

[anlfotofun]

[boys4pelefan]

do you?

[dancuny]

Merlin Camera

This week's posting is about a relatively uncommon camera with an odd and unusual look made by a tiny company in the UK. The camera is the Merlin, produced by United Optical Instruments in Southend-on-the-Sea, England. 

 I had seen the Merlin camera in books and online when looking at subminiature cameras. Still, it wasn't until my wife. I was on a trip to London a couple of years ago when I came across this odd bird at the Camera’s London stall on Portobello Road on a day that my wife and I were scheduled to go home. 

 Our flight wasn't until later in the afternoon, and I wanted to look for cameras before leaving, so I went there early in the morning to make it back in time to go to the airport. That's where I spotted the Merlin camera and a few other cameras I brought back to the States with me.

 What caught my eye about the Merlin camera is the very odd shape of the camera. It has a wide part of the body, then narrows down, but the lens area flares out again, and the winding knob is on the bottom of the camera. You need to display the camera on the side unless you rest the camera on something due to the winding knob on the bottom of the camera. It just doesn't sit evenly on a flat surface.

The Company:

United Optical Instruments is only known to have made two different cameras, and neither was very popular. One of the cameras they manufactured was the Jupiter camera, a simple plastic camera with an Art Deco faceplate that took 127-size film. The only controls on the camera were two shutter speeds, the winding mechanism, and the shutter release. The other camera they manufactured was the subminiature Merlin camera. 

 I can find little information about United Optical Instruments, which is located in a resort town on the Thames Estuary in Essex, southeast England, about 68 kilometers from London. However, I did find that the company was associated with the Erac Selling Company.

 The Erac Selling Co. manufactured and patented two slightly different, oddly shaped cameras that resembled a pistol made from thermoplastic material. One of the items was the Erac Automatic Pistol Camera, and the other was the Erac Mercury 1. These pistol-shaped cameras housed a Merlin camera without the viewfinder inside the pistol's body. When you pulled the pistol trigger, the camera took the photo. 

 According to the information I found online, the Erac is described and illustrated in a patent issued to Harry Steward of Southend-on-Sea in 1931. The early version uses a different type of film advance, and the Merlin doesn't seem to be in this version.

 Harry Steward and Harry Covill were issued an improved patent in 1937. The second camera's patent described it as a pistol-shaped device. The patent drawings show it to resemble a Merlin camera inside, but there is no mention of Erac.

 Since the Merlin camera is inside the Erac Pistol camera, they patented a camera without the Merlin inside. Still, they found it too difficult to make it work. A few years later, they decided to put the Merlin camera inside the camera without the viewfinder.

The Camera:

As you can see in the photos, the camera is very small. It's only  2" wide, 2" deep, and 2" tall with finder up and 1.5" when it's down, and it only weighs 3.9 oz. The camera is made from cast metal and painted with a crackle finish, as the exterior has a rough surface. I can see areas where it's either chipped off or some flaked off. My Merlin camera is black, but they also have blue, green, and red cameras.

 The Merlin took a special film of only 20mm rolls with a negative size of 18x18mm. It came on paperback rolls similar to the small "hit" style cameras, and to load the camera, the top of the camera, which is attached to the back, slides off, exposing the film chamber. Put in the roll of film, bring it over to the take-up spool, slide the top back on, and advance the roll to the first frame. The winding knob is on the bottom of the camera, as I mentioned earlier.

 Another slight issue is that the top of the body doesn't lock, so if the camera falls, the top can slide off, exposing the film. Unfortunately, my camera doesn't have any original fill spools, only the blank areas where the film goes.

 There is only one shutter speed, and the shutter release is on the bottom of the camera along with the film advance knob. The only item on the top of the camera is the fold-down viewfinder. The lens has no focus as it's a meniscus-style lens.

Conclusion:

Since I didn't have the film for this camera, I couldn't take it out for a walk through the neighborhood to take photos and see how it did. That's OK. I can use other cameras to do that.

 I really like having this small camera in my collection, and now I want to find a Jupiter or Erac camera to add to it.

 Thank you for taking a few minutes from your day to read about this wonderful camera made almost 100 years ago by a very small company in England. It has a nice place in my collection and hopefully inspires you to find one for it, too.

 I'd love to hear from you if you have questions, comments, or concerns about this or any of the cameras I've written about.

 Until next week, please be safe.

[xitsensunmoon]

My first ever comic con! And first cosplay too. Of course it's gonna be my boy :] Ramblings about the process are under the cut(Let me know if?? You would want me to elaborate with process images for any of the steps?)

The costume took me forever to make, as I've never done any machine sewing, sculpting, fabric dying or spray painting before but learning all of these was so fucking fun!! I never realised just how many different skills go into making a cosplay but it was so worth it!!!

Almost all of the clothes(except the hat) were purchased first as bases, but all of the detailing was added by me. All of the fabric used was originally just scraps that I was given for free so I needed to learn how to dye and dye all of the stars, they were originally white.

The sewing machine was its own beast that brought me tons of frustration from the lack of skill and knowledge (it was devastating to find out that 95% of fuck ups were my fault and not the machine's lmao). But as a result, a hat sewn from scratch, all of the fur trims, embroidery on the corset, stars and the collar(which is very hard to see on the pictures unfortunately) was all added manually. The stars and the stripes(on the back of the cape) were attached using heat-and-bond adhesive (I WISH I knew about such thing just when I started working on this. It would save me so much time and nerves.)

Then I found out about polymorph(mouldable plastic) and it has become the next thing I wanted to learn, to sculpt the claws and the fangs(yes, they're handmade jfksjs). The claws I then primed and painted in trillion coats because I wasn't satisfied with the colour of the spray paint. The fangs I moulded to my own teeth and then stained with tea to match the colour of my teeth :)c

As for makeup, I used Mehron Paradise water activated paints. At first I wanted to try to save money and bought myself Snazaroo instead, which unfortunately turned out to be a waste. Snazaroo didn't hold on my face for longer than 2 hours, cracking and peeling awfully. Mehron on the other hand survived 11 hours of me smiling, talking, emoting and such and didn't even crease at the smile lines(I'm actually shocked about that). It obviously works like any other makeup which means your skin texture and wrinkles won't go anywhere but Mehron's elasticity pleasantly surprised me. It did obviously smear from sweat and saliva(if you're eating and licking your lips) but if you don't touch the skin it just dries again, self setting. But if it's dry it's fully smear-proof. Highly recommend!

And last but not least, I've decided against painting my hands as it was very risky that I will stain everything I touch at the smallest hint of sweat. So instead I got myself gloves-tights(? Not sure how they're called but it's made from the same fabric as tights) and painted them with normal acrylic paint(did you know you could dye fabric with acrylic paint? I personally didn't), then heat set with an iron and voilà, they're reusable, my hands are not stained after an exhausting day and I don't stain everything I touch. It worked wonderfully which honestly was a surprise as I was really sceptical that acrylic paint will somehow stay in place.

I think this whole thing took me minimum of 6 months with big-big breaks for my school and life in general. But I'm really proud! This project taught me so many new skills and I couldn't have been happier about learning new knowledge, even if it sucked to fail in the meantime.

Everyone at the con was really nice and gave me a large confidence boost even tho it was my first time and I had no idea what I was doing. Taking photos with other people was really awkward/new for me as I hate cameras so I really had no idea how to pose/behave in front of one. But that's okay I think. This whole experience definitely made me want to do this again, so I think that will come with experience. Thank you for reading this far, hope you enjoyed this little summary :)

[tae]

TXT 'Love Language' (2025)

[dizzyyeti]

Kirk’s little half-smile stare he does at Spock literally kills me everytime.

He looks so tender and trusting it literally is the sweetest thing EVER WAAAHHHHH

[adamoose-art]

Isat Doodle Dump #2!

I've been excited to share this page for so long!

Minor Act 3 and 4 spoilers, (accidental) Act 6 spoiler (below the cut)

Click through for close ups of some of my favorites on this page! Doodles with text on them have alt text in case it's hard to read.

(accidental) two hats spoiler under cut

By the time I got to act 4 I had my theories, and this seemed so funny.

[buckslasagna]

Things in this gif that make me happy: 1) buck leaning on bobby 2) proud captain dad bobby 3) all of their smiles 4) buck sneaking a glance at eddie 5) eddie literally glowing in the sunshine with his cutie sunglasses.

[anlfotofun]

[boys4pelefan]

i took my tiny camera to the marsh today :) the cloud cover was perfect for pretty pictures

[phantobats]

Batfam AU where Dick Grayson starts a YouTube channel during his time as Robin.

edit !: here's the fic!

It starts off as an educational channel, with Bruce and Dick making self-defense and survival tips videos. Gothamites love watching their dynamic play out, especially in the self defense videos as Robin is the one to demonstrate each move on Batman and despite the man's lack of facial expressions and quips, there's a sort of pride shining through.

Dick loves giving the people what they want however, so slowly the content starts diversifying into vlogs while they're on stake outs, challenge videos and the occasional prank.

Due to the various demands, they also start live streams for whenever they are practicing in the Cave.

It becomes a tradition for each new Robin to take over handling the channel, with other batfamily members joining in here and there.

[figureskatingpenguin]

Mao Shimada (JPN): Defying Gravity | 2024 ISU Junior Grand Prix Final, SP

achieving a season's best, mao shimada plays her best performance as elphaba in her short program, defying gravity 💚 

[bamsara]

Guess what plushie came in the mail!! (The cat was a paid actor)

[putting-kinger-in-places]

(???), Real Life!

[textless]

It's baby bunny season, and this one is not much bigger than a scary leaf!

Cochise County, Arizona, May 2024.

[aglitchysylveon]

I find him kinda neat so I drew him (don't mind the alternate)

LIKE to be his Darling, REBLOG to share his loves arbor/j

Or do both to send him to therapy/JJJJ