In this article, we will discuss printing an array in java using different methods like using loop, without loop, 2d array, and array in reverse with source code and output of that.
#1. Printing an Array in Java using for loop
A. Explanation of the source code
The code snippet below demonstrates how to print an array in Java using a for loop. The for loop iterates through the elements of the…
Y'know what I just realized? The implications of Mu Qing, Feng Xin, and Lang Qianqiu being able to just use random dice to follow(or try to follow) Hua Cheng and Xie Lian. What that means is that it's not the dice itself that are responsible for transporting the user. Rather, it seems like once Hua Cheng has connected to a location using his dice, any dice can be used to access the path created. So rather than the dice being transportation arrays, it's rather that the dice project a transportation array of some sort onto a target, which can then be utilized by others afterwards. like using a printing press rather than hand-writing something.
huh. i wonder if Hua Cheng can even draw a transportation array.
I dearly wish that DC would make its vast array of archival material more readily accessible. Their recent strategy seems to be limited to oversize, expensive omnibus editions you need forklift certification to handle, or else medium-size surveys (like the A CELEBRATION OF XX YEARS books) with a steadily diminishing proportion of older material and a tendency to reprint the same handful of stories over and over. With Batman and Superman, in particular, I think they could get a lot of mileage out of a modern equivalent to the old digest and tabloid reprint issues of the '70s and '80s: collections of perhaps 100 pages or so, organized around specific themes (e.g., Batman's alien encounters), in color not applied by sloppy algorithmic process, and offered on a regular basis for a non-obscene price. The word "curated" gets throw around rather freely these days, but that's what this material really needs.
Study: Under extreme impacts, metals get stronger when heated
New Post has been published on https://thedigitalinsider.com/study-under-extreme-impacts-metals-get-stronger-when-heated/
Study: Under extreme impacts, metals get stronger when heated
Metals get softer when they are heated, which is how blacksmiths can form iron into complex shapes by heating it red hot. And anyone who compares a copper wire with a steel coat hanger will quickly discern that copper is much more pliable than steel.
But scientists at MIT have discovered that when metal is struck by an object moving at a super high velocity, the opposite happens: The hotter the metal, the stronger it is. Under those conditions, which put extreme stress on the metal, copper can actually be just as strong as steel. The new discovery could lead to new approaches to designing materials for extreme environments, such as shields that protect spacecraft or hypersonic aircraft, or equipment for high-speed manufacturing processes.
The findings are described in a paper appearing today in the journal Nature, by Ian Dowding, an MIT graduate student, and Christopher Schuh, former head of MIT’s Department of Materials Science and Engineering, now dean of engineering at Northwestern University and visiting professor at MIT.
The new finding, the authors write, “is counterintuitive and at odds with decades of studies in less extreme conditions.” The unexpected results could affect a variety of applications because the extreme velocities involved in these impacts occur routinely in meteorite impacts on spacecraft in orbit and in high-speed machining operations used in manufacturing, sandblasting, and some additive manufacturing (3D printing) processes.
The experiments the researchers used to find this effect involved shooting tiny particles of sapphire, just millionths of a meter across, at flat sheets of metal. Propelled by laser beams, the particles reached high velocities, on the order of a few hundred meters per second. While other researchers have occasionally done experiments at similarly high velocities, they have tended to use larger impactors, at the scale of centimeters or larger. Because these larger impacts were dominated by effects of the shock of the impact, there was no way to separate out the mechanical and thermal effects.
The tiny particles in the new study don’t create a significant pressure wave when they hit the target. But it has taken a decade of research at MIT to develop methods of propelling such microscopic particles at such high velocities. “We’ve taken advantage of that,” Schuh says, along with other new techniques for observing the high-speed impact itself.
The team used extremely high-speed cameras “to watch the particles as they come in and as they fly away,” he says. As the particles bounce off the surface, the difference between the incoming and outgoing velocities “tells you how much energy was deposited” into the target, which is an indicator of the surface strength.
Three photos show a particle bouncing off of a surface. The particle bounces higher when the temperature is increased. These three images are labeled “20 °C, 100 °C, and 177 °C.”
The team used extremely high-speed cameras to track particles. This sequence, from research data, shows a particle flying in and rebounding off of a surface.
The tiny particles they used were made of alumina, or sapphire, and are “very hard,” Dowding says. At 10 to 20 microns (millionths of a meter) across, these are between one-tenth and one-fifth of the thickness of a human hair. When the launchpad behind those particles is hit by a laser beam, part of the material vaporizes, creating a jet of vapor that propels the particle in the opposite direction.
The researchers shot the particles at samples of copper, titanium, and gold, and they expect their results should apply to other metals as well. They say their data provide the first direct experimental evidence for this anomalous thermal effect of increased strength with greater heat, although hints of such an effect had been reported before.
The surprising effect appears to result from the way the orderly arrays of atoms that make up the crystalline structure of metals move under different conditions, according to the researchers’ analysis. They show that there are three separate effects governing how metal deforms under stress, and while two of these follow the predicted trajectory of increasing deformation at higher temperatures, it is the third effect, called drag strengthening, that reverses its effect when the deformation rate crosses a certain threshold.
Beyond this crossover point, the higher temperature increases the activity of phonons — waves of sound or heat — within the material, and these phonons interact with dislocations in the crystalline lattice in a way that limits their ability to slip and deform. The effect increases with increased impact speed and temperature, Dowding says, so that “the faster you go, the less the dislocations are able to respond.”
Of course, at some point the increased temperature will begin to melt the metal, and at that point the effect will reverse again and lead to softening. “There will be a limit” to this strengthening effect, Dowding says, “but we don’t know what it is.”
The findings could lead to different choices of materials when designing devices that may encounter such extreme stresses, Schuh says. For example, metals that may ordinarily be much weaker, but that are less expensive or easier to process, might be useful in situations where nobody would have thought to use them before.
The extreme conditions the researchers studied are not confined to spacecraft or extreme manufacturing methods. “If you are flying a helicopter in a sandstorm, a lot of these sand particles will reach high velocities as they hit the blades,” Dowding says, and under desert conditions they may reach the high temperatures where these hardening effects kick in.
The techniques the researchers used to uncover this phenomenon could be applied to a variety of other materials and situations, including other metals and alloys. Designing materials to be used in extreme conditions by simply extrapolating from known properties at less extreme conditions could lead to seriously mistaken expectations about how materials will behave under extreme stresses, they say.
The research was supported by the U.S. Department of Energy.
It is called "Flexible printed circuit boards in array",if you just engage in or somehow need this product or custom another new one,welcome contact me to know more details
With your donations, Hussam was able to send another $5000 to help Mahmoud AbuSalama's team to buy food for families in North Gaza (Jabalia)! This is part of Hussam's commitment to lend a hand to the northern part of Gaza. These grassroots efforts has been very helpful to families, filling in the gaps in what governments failed to do.
Donate today to HelpGazaChildren, a grassroots effort in Gaza to help families on the ground! All your donations go directly to the people of Gaza with NO middleman in between.
HelpGazaChildren Notion Site || #helpgazachildren tag
Paypal Link || GoFundMe Link
[ID: A video from Mahmoud AbuSalama showing an array of canned goods and flour. A printed sign of tumblr is behind the canned goods. The camera then pans to different people weighing and putting together packages of food. The subtitles to the video read:
"Hello, friends in Tumblr. We are here in the North of Gaza Strip and as we are used to from you by providing aid and food supplies for north of Gaza Strip. Here, our team prepares food supplies for the families in North of Gaza. As you can see. Good Bless you."]
Space Concrete: Paving the Way for Extraterrestrial Construction
Introduction
As the prospects of space exploration and colonization continue to grow, the need for innovative materials and construction techniques becomes paramount. One such groundbreaking development is “space concrete” – a remarkable blend of traditional concrete and advanced materials designed to withstand the harsh conditions of outer space. In this article, we will delve into the…