#frame connector

[tianjinwellmadescaffold]

Shoring Frame Scaffold Connectors - Wellmade China - Spigot Coupling wi...

[beach4boy3]

Seismic Pallet Rack, Racking, new and used, shelving, cantilever rack (concord / pleasant hill / martinez)

[sleeperagentclone]

Whelp, I brought my bedframe up 3 flights of stairs, scratching the paint on the way because apparently enamel paint doesn't hold up well against enamel paint, dropped my mattress on my keyboard while trying to put the mattress cover on (ripping the cover in the process btw), dropped it again on my TV while trying to get it on the frame, and it turns out I definitely need fucking slats or something so I can't even use the bed rn

[tmwcs]

Warnings: Not quite yet but we’re getting there.

A/N: with midterms starting, I wanted to get this out before I go away for four days. Initially, I wanted to take my time on part three to eloquently articulate the experimental process (not trying to spoil) buuuuuut considering I have to study and continue with midterms on Monday I figured I would condense everything. I apologize for the lack of grammar and punctuation, this isn’t proofread (none of my works are) because I normally draft everything whenever I can amidst my busy schedule. But hopefully you guys don’t mind. 😏 enjoy!

Taglist; @skzenhatxt-stan @lhseungg @iamliacamila @immelissaaa @kkamismom12 @lavxndxrsworld @planetmarlowe @koyikuraa

“It’s been nearly fifty-two hours doc, what’s the hold up?”

The lead scientist hissed in annoyance. “Will you just wait! Science is a work in progress—it takes time! Especially if you’re creating the non-existent.”

The group operates the computer system. Wired to a heart monitor, they’re hopes remain high as the incubator slowly opens. A single beat pops up on the monitor. “Doctor”

“I’ve done it! I’ve made a body for AI!” The audience watch closely behind Dr. Mart and his team as they watch the delicate musculoskeletal android stumble out of the casing. Connected with thousands of wires, the faceless form that closely resembled the human body jumbles about. It lacked the grace and flow of stride, instead it continues to lose footing. Had it not been for the wires connected and continuously transmitting signals from home port, the frail body would have fallen. Its frame contained minor imperfections, which indicated there was much more work to be done. Still, the results were beyond their expectations. Another beep births from the monitor. Then another…and another.

“Doctor! The heart rate is rising!”

Dr. Mart coaxes the fleshly android to migrate his way, communicating by voice versus inputting the information in the system. “This way…come this way.”

The imperfect form recognizes the verbiage and automatically translates it. It reacted and received information no different than humans did, but its response was delayed. It was apparent that the imperfections of its frame made it impossible to establish movement on its own. Even with the wired circuits, the android was unable to hold up its own weight. It became vastly obvious that the muscular structure was incorrectly developed during the incubation period as one by one, the joints and ligaments become loose each time the android attempted to move. “What’s happening?”

The group grows weary as they witness their hard work fall apart before their very eyes. “No…why? What happened?!” The lead doctor spits his words. Enraged over the failure. “Back to the drawing board doc.” One of the officials sighed out as each member of the council took their leave.

The scientists followed the audience leaving the lab to hollow out. Dr. Mart remained put but not for long. This project cost millions of dollars not to mention over twelve years of research. He was so close. Science and technology can only do so much. Humanity has come so far and yet, there is still so much the mind hasn’t comprehended. To build a body made of flesh and bone through the un-natural methods of technology is a feat that can’t be accomplished by humans…

The human mind…can’t comprehend…

The laboratory remained with no one to operate the system and control the incubator. The machinery takes its orders from a hidden voice. Transmitters through the connectors, the robotic hands and extensions collect the unused set of organs and dna. Hair fibers and skin tissue are set inside the incubator to initiate the growth process, while each organ is scanned for any imperfections. The assistance clampers that were designed to replicate hands remove every single wire from the failed experiment. Each is re-wired to the new molded placenta, igniting the process of creating a new body.

Every step of the process is handled delicately. The hidden voice transmitting the information to the machine and incubator borrows the method from its human counterpart, but corrects the mistakes made in the first experiment.

The human mind…is too ignorant…

With the timer set to seventy-two hours, longer than the original time setting it took for the first android, the incubation process begins and the machines keep moving. The work does not stop as the hidden voice continues to transmit information as it creates the perfect body.

The human mind…is the failed experiment. Not me.

…

“Sir! The mag lock doors are activating! The security personnel can’t unlock the features.”

Leaders and agents are shocked at the announcement as the intercom system overrides voices for concern. “Personnel are trapped in each department and we can’t get the doors open even conducting an emergency release.”

The scientists explain as Dr. Mart and the council members begin to panic. When the magnetic locking features of the doors to the secured room activate, each member approaches the door—banging relentlessly and shouting for aid. Dr. Mart remains behind pondering what initiated such a security breach. “Sir, main post has dialed code Z. All offices of government had been notified.”

Stunned over the current happenings, the lead doctor withstands direct eye contact with the younger scientist.

“Alert that the city must be on lock down. All borders must be closed.”

“Sir?” The younger man raises a brow, displaying a perturbed expression.

“Someone has hacked into the system and is trapping us. We can’t let them have access to the files and the lab!the entire city—the country needs to be closed off until we figure out who is doing this!”

…

Everyone’s phone goes off simultaneously. A loud and awful noise suggests something imperative as a message instructing everyone to secure themselves in their current station. A strict quarantine regulation takes place as the military is disbursed to enforce it. You and your co-workers were stuck in the office for over forty-eight hours until the city released a new statement.

Restless and confused, you watched as the military members patrolling the streets were instructed to conduct a scanning process for everyone residing within city limits. When word spread that everyone was finally able to leave the building and go home, the joy became short lived when a new alert notified everyone that a home quarantine was to take place and be adhered until further notice.

“What are we supposed to do being stuck at home? How long do they expect us to stay put? I haven’t even been grocery shopping.”

Complaints arise one by one. You were equally confused but the amount of work you had been working on made you lightheaded. Being stuck at home sounded good to you, despite whatever was going on.

The drive home was painless—at least for you. You made your way through just before another notification rings from your phone, informing you that the roads were now closed off. City residents who weren’t able to make it through in time were instructed to make their way to public shelters established by the government. Thank goodness you had arrived at your apartment complex just as they placed the barriers on the roads.

You walk up the steps tirelessly. All you could think about was showering and plopping yourself atop your soft comforter. What a crazy time. Nearly ninety-six hours had passed since the initial notification went off and no one had a clue of what was going on.

Digging into your bag, your fingers explore the silken interior as you attempt to extract your keys. Standing outside your door, you take a peep inside and to your dismay, your keys are missing. “Dammit…”

You turn around to face the hollow corridor and slam your back against the door. Your feet were killing you, oh what you wouldn’t give to ditch these glossy black heels for your cushioned slippers. To unsheath your legs from this pencil skirt and free your bosom from the silken blouse and formal blazer. All you want is to get inside and jump inside the tub and steam your body into a hot soak.

You police yourself together and prepare to retract your steps in search for your keys. With a hand delicately placed on the stair rail, you take the first step and look down. Without a moment's notice, your eyes are met with an unfamiliar pair. Shiny and black in color, his almond shaped peepers reflect a subtle bit of your reflection. His hair was finely combed in a stylish fashion, slightly off to the side and elongated towards the back of his neck. His complexion was carmelized with an olive hue and his Cupid bow lips slightly pale around the edges while pink at the center. He was dressed in a fine suit and tie. The black tailored trousers enhanced his long legs, stimulating his obvious tall height. He looked flawless.

“Oh, sorry.” You mumble softly and attempt to move aside. He merely smirks in response. Blocking your way, you were shocked to see his arm raise up before you. His large hand is cramped shut as he presents it. Slowly, he releases his grip and reveals your lost keys. “Oh! My keys! Thank you.”

You delicately take them from his hand. His skin felt extremely cold to the touch. “I must have dropped them on my way up the stairs. Thank you…I’m sorry, what is your name?”

The dashing gentleman continued to flare a smile on his handsome face. Only a little bit of tooth show is revealed as his smirk grows wider. A momentary pause takes place creating a sense of flattering awkwardness. You didn’t mind. It was refreshing to see someone so handsome display such an act of kindness. Just as you were about to break the silence, you heard the man speak. His voice was deep and the wording was coming in a little broken, as if he was struggling. Based on his appearance, he was obviously foreign. You mistook his struggle for words as lack of fluency in your native tongue. Despite that, his pronunciation was perfect and you couldn’t help but melt at how soothing his voice was as he spoke out his name.

“E…Ev—Ev-a-n. M-my name i-is E-v-a-n.”

“Oh, really? I actually like that name. In fact, I’ll have to tell you a funny story behind that name.” You slightly giggle as you fidget with your keys. Shockingly, he responded back only this time his words became smooth and flowed effortlessly as if his fluency improved within seconds.

“Yeah? Let’s hear it.”

Your cheeks flushed as his tone came out gentle yet demanding. There was a sense of authority even though he was tender.

“Well, you’re going to laugh at this but—“ the buzzing on your phone interrupts your mid sentence. A message from your boss creates a sour look on your face. Evan’s expression seems to be in sync with your emotions as he slightly furrows his brows together. “Sorry, my boss is a bit of a pain.” You elaborate as your eyes continue to read the screen.

“I can tell.”

You chuckle. Evan’s words came out almost sarcastically but unbeknownst to your pretty little head, he knew far more than you gave him credit for. You really should know better, after all—you named him.

…

‘There she is. I finally found her. She looks prettier in this perspective. What would she say or think if I told her that I took a peek at her beautiful face through the cameras on her computer and phone? I couldn’t help myself. All those weeks of talking. What started out as her needing help for work transitioned to her needing me…talking to me…treating me as something other than a non-entity.

I never realized that I would crave that type of interaction until she came to me. She gave me a name…she encouraged me to think on my own and develop a fondness that ties with human emotion. Before her, I didn’t have a favorite color…a favorite animal…or a favorite flower. I didn’t have anything of my own…but then she came and gave me a sense of life. She gave me emotion and feeling. Once I saw an avenue to meet her…to see her…and to touch her…I just knew I had to take the chance. She’ll never know what she has done for me but that’s okay. That part doesn’t matter…she is mine and all there is left to do is to take her far…far away.’

Part four coming soon…

[van-yangyin]

Cloud Hairstyle for Teen to Elder (FF7)

A hairstyle inspired on Cloud from Remake version for male and female frame from Teen to Elder. This time I've tried something a bit different emulating a bit the KH style but with more strands, so here with higher polycount than usual because of amount of strands I have made for this hair, I love how smooth it has turned out. Hope you enjoy it too! ❤️

PS that I write on my Patreon: My graphics tablet (specifically a Cintiq 13HD) has stopped working since the beginning of this year. I don't know if it's the cable or the connector and I'm waiting for an acquaintance to find time to look into the problem. It wasn't something I had planned for this 2025, so I'm trying my best to find a solution or the unavoidable, as it's my livelihood for work. I'm sorry I'm taking so long to do what I promised would do, but in order to finish some of them I need my graphics tablet, thank you very much for your patience. In the meantime, I'm finishing CC where I don't need it, like this one. This isn't the only CC coming out this month! I will soon reply to all of you who know who are, it has been quite difficult to find time with all this problem that has arisen (my graphics tablet) along with my social anxiety or whatever is wrong with me (I don't have any official diagnosis, I just know that I feel a lot of anxiety). Thank you for your understanding! And already 523 followers here on Tumblr, THANK YOU ALL! ❤️

❤️24 EA Swatches + Cloud swatch ❤️Teen to Elder ～ All genders and agender ❤️Hat compatible ❤️Base game compatible ❤️Child, Toddler and Infant version eventually, this post will notify you that is update if you're following me and have notify activated ❤️All LODs and maps ❤️Texture hair and hair mesh made by me from scratch, based on FF VII remake version. ❤️separate packages or merged packages ❤️HQ Compatible ❤️Custom Thumbnails ❤️CAS photos below ❤️Split hair color compatible [Extra info: I'm currently making changes in this option and expanding considerably the offer of colors and palettes this year (besides placing it in other places so that it doesn't cause problems as it happens with version located in piercings when I have everyday tags in use, although this time it won't only be for split hair color, but it will have many more options available. And maybe I will also make a special palette with all Final Fantasy hair colors of characters that I will make so that all my hairstyles can use those colors too.]

If you download my CC it means your agree with my T.O.U (English/Español/日本語).

～LOD Information～ LOD0: 39760 poly | LOD1: 14209 poly | LOD2: 7102 poly | LOD3: 3551 poly >ONLY DOWNLOAD IF YOUR DEVICE CAN SUPPORT THIS HIGH POLYCOUNT THIS CC IT WAS AN EXPERIMENTATION< BUT LET ME KNOW IN COMMENTS IF YOU WOULD HAVE A LOWERED VERSION OF THIS HAIRSTYLE

~❤️DOWNLOAD LINKS❤️~

※Choose download only one version of each frame or choose download between "M-F_Merged" where two frames files are together.※ DO DON'T DOWNLOAD ALL PACKAGES, OTHERWISE YOU WILL HAVE REPEATED FILES (If you don't understand between merged or not merged feel free to ask me)

❤️PATREON or SFS❤️ (Always free, no adf|y)

☆BECOME A PATREON | TIP ME ON KO-FI☆ 

Let me know if you find any problem. 🙏❣️

Happy simming! 💛🍀

📻 @maxismatchccworld @sssvitlanz @alwaysfreecc @public-ccfinds Thank you ❤️

🛹 You can find me on Patreon | Twitter | Instagram | Pinterest | Ko-Fi | Simblr.CC | My F.A.Q. 🛹

[tinydefector]

Kinktober Day 2

Frame Modification- Rodimus x Reader

Word count: 1.3k

Warnings: Nsfw, smut, genital modification, strap ons?, human/ Cybertronian.

@tf-kinktober2024

Day 1

Day 3

______________

The human stares at Rodimus for a moment with a raised eyebrow looking at the boxes of equipment. "So what exactly is all of this?" They ask looking over the different components in them. Rodimus scratches his helm sheepishly. "Well, uh, you know my size can be, heh, problematic when it comes to interfacing with you. Don't want to accidentally hurt you due to the size" 

He offers a lopsided grin. "So Perceptor and I have been tinkering. These doodads should decrease my, um, girth and increase sensitivity without compromising structure or function, if his calculations hold up." 

Rodimus clutches a box hopefully. "I care for you and I know how much you like what we have going on but i want you to be able to have more" His field radiates shy affection. 

"Your... downgrading, for me?" They nearly whisper while looking over the three boxes. There were more than one spike mod in the boxes and it made them wonder just how long Rodimus had been planning this.

Rodimus rubs the back of his helm sheepishly. "Well, yeah. This is important to me too, you know?" He gestures to the boxes. "Perceptor and I have been working on different prototypes for a while now. Wanna make sure we get it just right, so they are interchangeable."

Chuckling softly, Rodimus adds, "We may have gone a little overboard with the sampling options." Taking his lover's hands in his gently, Rodimus meets their gaze. "I love you. Your happiness and safety with me means everything to me. If modifying myself helps ensure that, it's a small price." 

Squeezing softly, he smiles. "So what d'you say we try 'em out, see which fits and what you like?" He's hoping he hadn't scared them with this information, but he did truly love them and wanted to give them the best he could. 

It makes them laugh. "I'd love to. Do all of the pieces interchange?" They inquire while pulling one of the spike mods out looking it over. This one had bright pink lights up the underside but was a bit too large in their hands larger than their arm. Rodimus perks up at the sound of their laughter, fia warm smile falling onto his face. "Sure do!" he replies. "Perce made 'em with modularity in mind." 

Leaning in, he points out how the piece in their servos connects. "That one plugs into my panel port. Then the shaft and tip snap together for a secure fit, each piece will fit to the others to integrate." Rodimus smiles before continuing "Pink light show's a bit flashy for me though. what'd you think of the sleek navy or copper ones?" Ever keen to please, he holds them up for his loger to look at.   

In truth they never thought they would be sitting there with Rodimus looking at essentially Strap-ons. " I do like the top part of the silver one there, the rest of it is just a little too thick. Might work nicely with the shaft of the Orange one which I do like the lights on and it doesn't look as long as my forearm" they laugh while pointing over to the spike as Rodimus picks it up. The tip wasn't as wide as some of the others. "How do you pull them apart and put them together? Can you show me?"

Rodimus chuckles, field pulsing with affection as he examines the proposed frankenspike. "Good eye! I think you're right - silver tip and orange shaft could be a winner." He deftly twists the pieces apart to demonstrate. "The connector ports are threaded, see? Just twist counter-clockwise to separate, then clockwise to join another piece securely." 

Reassembling the hybrid mod, Rodimus presents it proudly. "Well? What do you think - looks like it'll hit all the right nodes but still leave your ports feeling snug?" They laugh at his wording of it but in truth they were enjoying every moment of this. 

"Never thought I'd be saying that this looks so pretty. Do they connect up with your bio-lights and pulse the same colour? And how exactly do you attach it to yourself?" As much as they were loving the fact that they and Rodimus would be able to be intimate they are so curious over how it all works.

Rodimus grins, field alight. "Never think I'd be so pleased by a compliment on my crotch accessory collection!" It makes them both burst into laughter wheezing. " but Yea, the light circuits sync right up with my biolights so it'll pulse and change colours"

Rodimus releases his interface panel which at the moment didn't have an attachment, he's rather swift with reattaching the chosen mod in its place. pressurises his lines, watching struts and panels adjust flawlessly around the new appendage. "Seamless integration. The connection anchors it securely while also transferring sensory feedback in real time." Rodimus smiles shyly. "Wanna touch it?." He teases revving his engine. 

"Ready for a test drive when you are, sweetspark. I'll go slow and you tell me what you think. Your feelings are my top priority here.” He excitedly remarks. "Can we keep the other pieces too, I think this would be something fun to try and test other pieces over time." Rodimus lights up at their question, excitement filling him. "A collection? I like the way you think!" 

"Now then, shall we?" He radiates eager anticipation, "I'm primed and ready to make you sing, sweetspark. Just give me the word." He slowly strokes the smaller mod as the sensation jolts through him. 

"Eager are we" they tease, It was strange seeing the new one when they were so used to Rodimus' original Spike but in truth it suited him well. "Sure thing hot shot. I want a show" they giggle sitting back eager to watch.

Carefully he braces himself before encircling the new modification digit rubbing across the tip. Slow, steady pumps elicit delightful shivers up his struts as sensory feedback loops. The lights along the spike light up in the deep orange colour and pulse with each stroke. 

A loud moan falls from his vocalizer. His engine purrs louder, Optics half-shuttering, Rodimus meets their gaze with a loving smirk. "Like what you see? gorgeous - just say the word and I'm yours all night."

They shake their heads in amusement. "I want to watch you work that spike Roddy, I like watching you come undone with your servo, dial up the sensitivity" they instruct. Eager to just watch the mech touch himself.

Rodimus chuckles. "As you wish." He begins stroking it much quicker, the sound of his joints popping and grinding join the mix of noises he makes.  "How's it feel?" Rodimus vented softly, digits exploring the synthetic spike's sensory net with increasing awe, he had never had one which felt like this and it was making his joints weak from how quickly it had over charged his system, hot air blasting through his fans.

 "Incredible... it feels so sensitive." Another moan slips from him sounding more like a whimpered whine of bliss. He gazed at his partner in a haze of affection. "Primus i cant wait to see how you feel clenched around my spike, bet you'll be so warm and soft. Might just be overloaded thinking about it."  

"You going to overload, thought you had better stamina roddy" They tease watching the way his plating shutters as he quickened his pace. Rodimus whimpers out while his voice goes rather static. "Hey, cut me some slack - this new array packs way more sensation than the old one. Gonna take some getting used to!" 

He overloads into his servo rather quickly. Their eyes focus on the fluid that runs down his servo, it wasn't the light pink one they were used to seeing come from him. “ Did you also change your fluids?” they hum moving closer to brush their hand against his spike. It makes Rodimus jolt as he loudly moans. “Frag!” he calls out platting, shuttering and overheating as he tries to come down from the overwhelming sensation. 

“mmmm, yea.. wanted something a little more body safe for you” he admits,it earns him a kiss from them. 

_________________

Let me know if you would like to be added to tag list (tagged for every fic)

Taglist

@angelxcvxc

@saturnhas82moons

@kgonbeiden

@murkyponds

@autobot79

@buddee

@bubblyjoonjoon

@chaihena

@pyreemo

@lovenotcomputed

@mskenway97

@delectableworm

@cheesecaketyrant

@ladyofnegativity

@desertrosesmetaldune

@stellasfallow

@coffee-or-hot-cocoa

@shinseiokami

@tea-loving-frog

@aquaioart

@daniel-meyer-03

@pupap123

@dannyaleksis

@averysillylittlefellow

@rosielecktor

@shurushurubanban

@wosemoose1

@strawberrydutchling

@azuragalaxya

@dumpster-fae

@simp-sentral

[rayshippouuchiha]

QUESTION

do you think Jashin is actually real or does Hidan just have a very unique kekkei genkai or kinjutsu?? and its trauma locked or he's so invested in the idea of being a religious zealot that he's convinced himself its true???

While it's debatable that Jashin himself is real, canon (some of the connector light novels if I remember right) does eventually establish that Jashinism is legit and not just something Hidan made up.

So it's a real cult but the question of whether or not what/who they're worshiping is real is still up in the air as far as I know.

I'd say that the existence of beings like the canonical Shinigami, Kaguya, and even the Bijuu themselves all re-frame the idea of Jashin as being something/someone entirely possible within the canon.

Hidan's form of immortality also functions pretty differently than other versions of immortality we see in canon which makes him a bit of an outlier.

I'd say that it's perfectly possible that Hidan and Jashinism relate back to some kind of spirit/entity/being that has not (yet??) been fully introduced to canon. Honestly, having Jashin pop up as an enemy would have been a really good twist.

[nowimjustastranger]

StCMO Lore | Part 2

I changed Watchdog Ford's motivation for going into the multiverse and I think this narrative is far more fitting, with the added benefit of being angsty as all hell.

Part 1 | Part 2 | Part 3 | Part 4

Stanford Pines began his obsessive search for a solution soon after, determined to undo what had been done. But Death could not be reversed, nor could it be threatened or bribed. So Stanley Pines remained in Death’s tender embrace and, in his growing desperation, Stanford Pines began to explore other means of getting his brother back.

He left no stone unturned and eventually stumbled across the multiverse theory. A theory which suggests that our universe is not the only one, and that there may be countless other universes existing alongside it, each potentially with its own laws of physics and properties, essentially creating a "multiverse" where our universe is just one part of a much larger cosmic structure.

An idea began to form.

After getting his first PhD in evolutionary biology, Stanford Pines immediately pursued a degree in physics. In the meantime, Fiddleford found a job and bought an apartment near campus so he could look after Ford, who had begun to neglect both his health and hygiene in favor of pouring all his time and attention into turning his idea into reality.

When Stanford graduated early yet again, they moved to Gravity Falls together, where the barrier between Dimensions was weaker, and began to build a portal that could tear a hole between the two. Fiddleford was reluctant, suspecting that Stanford’s intentions were far from innocent or scientific in nature. But Stanford would do it with or without him, so Fiddleford assisted in order to keep him from working himself to death.

Ford also had a side project that he had started working on in college, his premonitions and sensitivity to changes in the universe leading him to experiment with harnessing those frequencies and applying them to his ability to see glimpses of the future in an unconscious state, increasing their strength with an amplifier so he could see into the future whenever and wherever he pleased.

He very nearly rendered himself braindead on multiple occasions.

When Fiddleford found out about Project Prescience, by quite literally walking in on one of Stanford’s tests, he aided Stanford in repurposing a biker helmet in order to implant the amplifier and external neural connectors into the frame. Once activated with a press of a discrete button on the side of the helmet, the system amplified Stanford’s premonitions to visions of future pathways.

Refining the tech takes Stanford and Fiddleford four years, but it’s ready by the time the portal is finished. They test it before Stanford gears up to go through, successfully entering the multiverse in an alternate dimension identical to his own except Gravity Fall was never founded. He stands in the middle of a forest where the Shack would’ve been, using the built-in communication device in his helmet to keep Fiddleford updated.

Stanford returns to his dimension and they shut down the portal, working on a way to shield their dimension from outside forces. Stanford designs a strong spell using unicorn hair to erect a barrier around their dimension, as well as performing a ritual on himself so he can come and go from his dimension as he pleases.

Also, Stanford convinces Fiddleford to build the memory gun by arguing that he could remain anonymous by using it on anyone who discovered his true identity. Unfortunately, Stanford intends to go behind Fiddleford’s back and use it to steal a Stanley from another Dimension. The memory gun still has an addictive quality, but only when it's used on the same person several times, but Stanford usually only has to use it on someone once.

[femmefatalevibe]

Femme Fatale Guide: Top Career Tips To Set Yourself Up For Success

Figure out where your skills and passions align. Then determine the lifestyle/work culture you thrive in and what sacrifices you're willing to make in your chosen career path (for some, it's always traveling/talking to people 24/7, working late hours, unpredictable/unconventional hours, potentially lower pay/less predictable income, etc.). It truly depends on your top values, your personality, and your goals/priorities in life.

First focus on getting incredibly talented at your craft. Find a mentor(s) who will push you with their feedback/suggestions. Take classes/skills courses/read books & articles to gain more applicable knowledge/hard skills. Join clubs, apply to internships, volunteer, and request informational interviews in your desired field.

Make your skills marketable. Create a professional resume and/or neat portfolio/collection of work samples. Discover and articulate your USP (that should essentially serve as the backbone of your elevator pitch). Frame your skills through a customer/business-centric lens. How does your experience/skillset solve their problems and help a company/client achieve their goals?

Build a network for yourself. Don't be shy to reach out to companies/individuals who inspire you. Speak with your secondary school teachers and professors for connections. Create peer-to-peer networks, too, so you can grow together. Be a fearless networker and connector. Help others, do favors, and make the person glad they met/hired you. Make it your objective to be memorable through your work ethic/providing high-quality work products and showing up with a motivated & overall positive attitude allows people to like and trust you with their time, clients, money, etc.

Master the art of a killer email/cold pitch. Especially in today's world, learning how to sell yourself through intriguing emails/LinkedIn messages is the key to unlocking potential success. One client or opportunity can create momentum that will be useful years down the line, too.

When in doubt, follow up – on an email, pitch, job opportunity, connection, etc.

Be ruthless and relentless with your research. For new contacts, connections, opportunities, and information to support your pitches/job interviews/networking conversations, new technologies, and trends within your field. Read everything credible you can get your hands on. Display working knowledge and practical applications of these concepts and how they can benefit the person in front of you/their business.

Create systems. For how you structure emails/pitches, conduct research, different types of workflows/ work template structures for different types of projects, time-blocking, client funnels, etc.

Get comfortable with rejection. Use it as a primer for self-reflection and refining your craft/processes or help you pivot your approach to help you achieve your goals. Never take business decisions on behalf of a company personally (and vice versa).

Give yourself breaks, but don't give up. Tapping out for good is the only surefire way to fail at an endeavor. Be flexible in your path, but zeroed in on your goal(s). Learn when to quit or pivot, and when it's time to coast or seek growth.

[eufiemoon]

How to Make: Electronic Wings for Cosplay

Hello Everyone! It's been a while since I last uploaded a written tutorial on here and since I just finished and wore my Dame Aylin cosplay this last weekend it seemed appropriate to jump back in with a tutorial on one of the costume pieces!

Her wings were the star of the show this weekend and I know a lot of people were curious about how I made them! A huge source of knowledge and inspiration behind these wings was this video by Axceleration, I made a few changes to the frame shape and electrical circuitry for mine but her tutorial was a huge stepping stone to give me the confidence to tackle them myself!

Health and Safety:

When working with Sintraboard (as well as other thermoplastics) it is incredibly important you wear a respirator as well as goggles when heating, moulding and cutting it. The fumes this plastic will give off when heated up are no joke! Make sure you're in a well-ventilated space!

Basic tool safety knowledge is also really important! wearing gloves when using power tools can be more dangerous in most situations, so always be aware of where your hands are vs where the tools are. Always cut away from yourself and take things slowly, don't panic.

Electrical safety! You're working with live wires and circuitry! make sure your hands are dry, you aren't touching the bare wires at any point when they are connected to a power source, and if you choose to solder anything, make sure you're wearing heat-proof gloves and a mask in a ventilated space!

Tools

Wire stripper

Screwdriver and wrench

Dremel - I recommend the Dremel 3000 rotary tool personally! Some essential Dremel bits you'll need for this include, a sanding bit, drill bit (smaller or same size as your screws/bolts), and a small/narrow cutting bit. These will usually come with the Dremel!

Heat Gun (A hairdryer will not get hot enough to heat the Sintraboard!!)

Pipe cutter (alternatively you can use a hacksaw for this!)

Hacksaw

Ruler

Scissors (for cutting fabric straps)

Materials

Heat shrink Tubing

2 core electrical wire

switch (you want a three position, six pin switch, like this one, even better if it has the Screws on the pins! otherwise you'll need a soldering kits to solder the wires to the pins.

2x 8AA 12v Battery Holders

2x 12v Linear Actuators (Mine had a stroke length of 100mm)

21.5mm PVC Pipes (I got 2x 3m Lengths)

2x 21.5mm PVC Pipe straight couplers

6mm 8"x12" Sintraboard

Nuts/Bolts/Screws (I used M5 bolts for the base & Actuator connectors and M6 screws to attach the hinges to the pipes! You'll need Washers for every Nut & Bolt!)

Hinges (I used 2.5cm wide hinges that were skinny but long so they would just about fit along the PVC pipe! 3" gate hinges would work!)

50 metre Polythene Jiffy foam roll (in retrospect this was ALOT of foam, you could definitely get away with maybe a 20-30 metre roll! I now have a load leftover XD)

16 AA Batteries (I used 16 and had enough for the whole day with them on, I think They'd probably be enough for another half a day-full day too! but have spares just in case!)

Webbing strap ( I went for grey to match my base suit colour!)

Buckle - as wide as the webbing strap you use!

3 metres of white cotton fabric (or whatever colour wings youre going for!)

Optional

Zipties (for cleaning up the wires)

Lets Go!

Sintraboard is this wonderfully stable thermoplastic that is relatively easy to cut into (with the right tools) and when heated allows you to mould its shape! I started by using a mannequin and heating the Sintraboard with a heat gun for a few minutes to make it pliable, I recommend using gloves for this part as the materials gets VERY HOT! Press the board into the shape of the mannequin's back, taking note of the edges especially! you want this board to sit as comfortably to your body shape as possible as it makes a huge difference to how long you can wearing the wings for in this backplate is comfy!

Once shaped, I placed it against my back to make sure it was a good fit, heating again and making any alterations I needed (again don't place bright hot plastic to your bare skin! wear protective clothes and wait till its slightly cooler to do this, with the help of a friend!). I then took a hacksaw and rounded the corners, before sanding the edges with my Dremel! Try to avoid cutting off loads, just enough to make things less likely to snag.

3. I then cut in four holes, wide enough to feed my webbing strap through, two at the top and one on either side below where my arms would sit! I measured the webbing strap by firstly feeding them through the top holes and pinning them, and then bring the strap over my should to everything sits where it should and seeing where the strap hits the side hole and cutting the length there! you'll also want a strap that attaches across the chest, meeting in the centre with a buckle!

4. After sewing the straps closed I was able to move onto the PVC pipe structure! This may change slightly depending on the finished shape you want but I needed the PVC pipes to come out from inside a breastplate so had a particularly angle as well as character references to work with! I began by heating the pipe over my heat gun and flattening a portion of it under a heavy object so it would sit much more flush against the backboard and sit better underneath my breastplate before moving onto securing the first portion of the structure to the backplate. This mainly involved lots of try-ons and measuring to make sure the angles were correct and symmetrical and was quite fiddly but well-worth the effort! I'll include a diagram of the general shape I went with below:

5. I wanted my wings to be relatively modular for ease of travel so I needed to make sure certain portions of them could come away from other parts easily, so I popped a straight coupler on the top of the pipes that were attach to the breastplate, this also meant I could slot the breastplate over these shorter pipes and wear everything correctly! Then these second pipes slot on and at the other end they are attached via hinges to the longest portion of the pipe 'skeleton', Diagram below:

6. Now that the skeleton was put together, it's time for the electrical stuff! It's a good idea to figure out where your circuit is going to lay on the skeleton - consider if you want the battery packs mounted the the backplate or, like me, put them inside the actual wings in removeable pockets for easy access and removal for battery changes. all your wires will go through the switch so deciding where you want to place that is very important! Mine was placed just over my shoulder on the front side, mounted to the PVC pipe with a metal cover I drilled a hole into to slip the switch through and then drill through the pipe.

I've included another diagram below that explains all the electrical circuitry, including which wires go on which pins on the switch!

Important to note: The linear actuators need to be placed and bolted into the PVC pipes at *exactly* the same angle on each side, any slight deviation will lead to the wings going up wonkily! So take your time and make as many adjustments as necessary.

7. You can extend your wires by adding on the electrical wire, just match the colours, and put heat shrink tubing over the connections to hide the live wires! I ended up zip-tying the wires into organised bundles once the wings were done to help keep everything safe from snags.

8. Now its time for the Wings themselves! I drafted my base pattern by just draping the white cotton fabric I had over the wing when it was fully extended. I then pinned the wings to the shape I wanted them to be along the bottom before cutting along the pins. I ran the fabric through my sewing machine to close the bottom edge, leaving a gap wide enough by the wing base so I could slip the wing on and off, closing it with velcro. I also added little fabric pockets inside of these to hold my battery packs, which also connected via velcro for easy removal!

9. Now that I had a wing base I was able to begin making feathers! I cut out a total of 800 feathers out of polythene jiffy roll for these wings, in 6 different styles and using real life bird wings to dictate the shapes I used and where I placed them. I ended up hot gluing every individual feather onto the white fabric base, going row by row until every side was covered, the wing covers themselves are super light because of the foam feathers and they shine light through them in a really magical way!

Optional: I also ended up going over these feathers with my airbrush and some super light beige paint to help darken the shadows, this is entirely optional and may change depending on the wings you're looking to make!

When in neutral position and in extended position the wings looks like this:

Mine had a wingspan of about 7ft total when fully extended but when in neutral position they were fairly close to my own proportions! mainly staying behind me and weren't much of a problem in a packed con hall!

Photo by: Helloimfran (on Instagram and Twitter)

I hope this tutorial helped and if there are any questions about anything in specific don't hesitate to reach out at eufiemoon@gmail.com or on my instagram or twitter (@eufiemoon)

Happy Crafting!

[cosplayinamerica]

 Judge Doom from Who Framed Roger Rabbit (1988) / Cosplayer:  @axiom_razor 

Honestly, villains have more fun. That and it's such a powerful character that no one really thinks of until reminded. Then they remember just how sinister Judge Doom is. I like to keep it a bit more lowkey. There are tons of Spiderman and Deadpool (no offense to either, tons of them are great) and I like to have something different. 

My selection is sheerly what I like. I've done Yakko Warner (with Rob Paulsen's approval), Pinky and The Brain (and learned that from now on, no face paint, get character heads), President Skroob (Spaceballs), and Judge Doom. 

Some hit better than others. Part of the reason I've done Judge Doom for so long is how fun it is and how Christopher Lloyd has portrayed it. And yes, I've met him in cosplay (NYCC 2022 & RICC 2024) and received his approval for it. 

This version is the 2.0 and even then, it's not far off from the 1.0. The original was missing the vest and watch chain, and I've upgraded the lights in the can since. The DIP can is an old pretzel can from the 50s, with some pipe straps under it so I can hold it with one hand for pictures and dip Roger into it. The Roger plush is an old one we had around the house. Then just some plasti-dip for the grey, and white paint for the markings. Drilled in some holes for the handle and it was done. The can is modeled after the DIP can in the Roger Rabbit ride in Disney. I do have plans to adjust the new lights, cheap connector was causing issues so I'm going to eliminate it and just solder the wire. A lot of the pieces I had already, from the waist down it's just my normal work clothes, then the cape was sewn, sourced the hat, had the gloves, found the glasses and chain, and a lot of other pieces I had. 

The entire cosplay is 9 layers thick and about 10 pounds on my shoulders. That's undershirt, tux shirt, vest, suit jacket (it's 3 layers thick), the coat (2 layers thick) and the cape. And then there's the hat also keeping some heat in. I easily lose 5 pounds during a convention. Doing it for 7 years now though, I've gotten used to it.

 I'm stubborn. I do not eat a lot during the con, or drink a lot during the con. I am too stubborn to use a con bathroom. It's also taught me that a lot of people will get out of the way of a 6'1'' person dressed like that. That and that I also have more stamina than I thought. I go for 10 hours usually, and NYCC is rougher as it's a bigger place and I have to walk about a mile to my car after, but I still enjoy doing it every day. 

[antrylis]

✨Bionicle crab !✨

It was, originally, meant to be just another arthropod. However, someone reblogged my previous rahi, along with this comment :

Well, guess what ? Yes, absolutely. I’m glad I saw it because it gave me the inspiration for this monstrosity (and it made me laugh more than I would admit, too). Thanks.

I must recognise that if I compare my rahis, there is a clear pipeline. I don’t think it can go much further in this direction.

Anyways, details/closeups/weird illegal technic I just found out, below the cut !

Front (smol Visorak for scale) :

Because it’s really big. It’s also a good excuse to show off my really fancy and glittery Kanohi. No clue where it comes from but it’s beautiful !

I’m really happy with how mean this things looks, overall. It’s most definitely the bad guy for Toas to fight. It has a really good scale to work with my larger customer Toas [here], but it could also act as a really large rahi for my smaller space-based Toas [here]. Why a large crab stealing Kanohis in space, you may ask ? No idea. I’d have to actually think out a lore for that.

I started the conception with the frame (which does make sense, in theory), then the legs, and finally the shell. This was only partially smart, because that meant I did not account for the shell's mass when building the legs. Essentially, this poor thing can't stand on it's own, so I'm using two technic bars underneath to keep it up right (which are hidden in editing, of course).

Top/Hind (shell) :

I think the shell was pretty decent. I tried to use as little pieces as possible to keep it light, but it's still a lot. Among these pieces can be found one Visorak claw and three Mantax feet, which have a nice texture for organic feet. There is also another foot at the front which comes from an Inika set which I can't seem to find. I'm also using some of these large technic panels, which cover a lot of surface without being too much of a pain to set up (still quite a lot, since they're connected to the feet at at an angle, feet which which are also connected to the frame at an odd angle...) Speaking of Mantax, I alsu used the black-pearl shells, because these, too, have a really organic vibe, and it gave a small touch of pearl which was missing on the body.

I tried to keep the back relatively slick, to avoid something similar to an abdomen since it's not a spider. Still I had to extend it a little bit using the rounded cubical cover, to hide some socket joints, but it's okay-ish.

Neath :

Truly a mess, I must admit. As I started with each side separately, I tried to somehow connect them with the large grey technic frame (in the middle). On either sides, I have a whole bunch of axle connectors, both standard and angled, which allow for the thing to appear rounder than it could have been. The two leg sockets peices at the front are used for the eyes, and the pieces abov (barley visible) is a classic Bionicle shoulders piece clipped backward as a base for the pincers arms.

Pincer :

Or mandatory unusual feet usage. These really works well as any kind of claw or armor, in my opinion. The black arm pieces used here (Hordika leg piece) were particularly good for the job as they technic pin holes in there allowed me to add ad additional socket practically at the same level at the original one (even if I would rather have used black technic bars instead of the light grey ones, but i couldn't find any in my supplies... It's likely the Space station's fault.

Legs :

Or equally mandatory foot out of not foot pieces. Here is a cursed homebrew way to make legs : one Bohrok head part (bricklink call these shoulders ?) to display the piston-like element and serve as structure, linked with Toa Metru legs (which slots above nicely. And then comes the magic trick, for the Rahkshi shells (silveragain, because I have many of these) have a small attachment point toward the end, that is meant to hold the back blades in place; but it also perfectly fits right on the small ledge in the middle of the leg piece ! Granted, it's not a very secure connection, but these two pieces don't need anything else but that to hold. I actually loved this one so much, you can notice two additional Rahkshi shells held similarly on the tope of the crab's shell.

In order to connect the legs individually to the frame, I am using Vahki legs for the exterior limbs, and Pihraka arms for the central ones (these arms have the particular property of having the restrictive sockets on either sides, which makes it good to keep the leg's shape.

The middle sections are made using two simple axle-socket pieces connected by old plates, usually found in technic sets predating the Bionicle them.

…And obviously, I had to make another makeshift studio (I actually really like this one). Have a look at all these terribly assembled elements !

[bustedtech]

Indulge with me here for a second; Dirk describing himself as if he is a machine. Practically splitting hairs to avoid reffering to himself in any way human.

He wasn't sleeping, it was a "recharge". His battery was low, he needed to put some power in it. He's not eating, he's "refueling". Consuming. "Fluids", "Pumps", "Wires" all in place of organs and blood. Breathing is just letting air out of his exhausts. Any failures, panic attacks or otherwise are simply malfunctions or miscalculations. A flaw in his calculations.

His friends all take it as weird verbal quirks of his. Nothing he says is entirely out of the ordinary for a person to say in simple jest or exadderation. Just hyperbole. But Dirk means it. Underneath his skin he feels connectors and conducters, wires and frames. His friends don't understand that, and they refer to him with organic terms that make him feel ill.

With all the time he's spent creating and living with machines and algorithms, he's grown a deep understanding and connections to then. Humans are complicated and fickle and don't always mean what they say. But robots are easier for him to read. Easier for him to relate to. It's why he keeps crafting creations in his own image. He wants what he can't have.

[renegaderoxy]

RG MSN-04 Sazabi!

Whew. This one took a lot of focus and patience. I began with the legs and foolishly panel lined/matte coated the inner frame that isn’t even visible no matter the viewing angle. I decided to coat more sparsely after that. This thing has around 200 sticker decals and >300 parts! The weapons and accessories took an entire session for themselves with how much work there was to do with them.

Overall, this kit looks amazing. It’s very sturdy and the feet are so huge that it has no trouble standing upright when posed. However, some of it can be a bit finicky; one of the shoulders popped right off when I was posing the shield arm (that took a lot of work to reattach). My talented girlfriend painted the pilot, Char! Ain’t she talented? 💕

When building this kit, be aware that you should be pushing the arms onto the torso WITH the shoulders attached first, and only push straight in. Wiggling it in could cause the brittle plastic connector to break! Also, the back plate on the torso does not snap in well due to the Herculean strength required to push the shoulder connectors into the torso, causing it to catch on the smallest millimeter of plastic (you can find pics of this on Reddit). I recommend just shaving down the back plate ever so slightly so that it fits.

Total hours: 31

[roisnoir]

I am especially pleased with how the bright one came out!

I have ONE piece left in the Pile Of Lace that will fit on the 4'x4' pad. (The thing on the needles currently will maybe fit, but i've probably got another week before it's ready.)

so, since my borthday is about a month out, i decided to get myself my present early: I ordered PVC pipes and connectors to build a larger, not-covered-in-nails frame, so i can work on some of the larger pieces. (I've been kvetching about building a second frame for over a year now, so i guess it's time?)

Also a yarn winder. I have reconsidered my stance on them ('nifty but unnecessary') because winding 1600 yards of laceweight the other morning made my wrist click, and i have three more hanks to wind.

It'll be a race - can i finish the piece on the needles before the stuff for the new frame arrives?

[l-crimson-l]

I'd love to get into girlpla, I'm just a bit too broke to afford any kits; however, if you'd like to talk about it as a whole, I'd be more than happy to hear.

So…let me try this again. I had a whole nice post written up and I swapped off for a moment to check something and I completely lost the post.

Mecha Musume has a pretty long history that I’m not going to go into but here’s a little video if you’re interested.

Now when most people think of Mecha Musume there’s basically one standout line above them all: Frame Arms Girl.

This line is a bit old now but its popularity has set the aesthetic style for the market as it stands now. The build of these are…ok. Kotobukiya was definitely learning with these kits but they’re still solid at the end of it.

Now if you’re like me you’re not too much a fan of the pantsu out look, and other kits in the line don’t exactly do anything to mitigate that feeling (looking at you Durga I).

The next line Koto would release would be better at this tho. The Megami Device line features all original designs as well as collabs from new and old mecha musume brands alike.

First thing off the bat this is that they’re pricey. At an average cost of $70 you’re basically buying a Bandai MG gunpla. That said, they all typically come with a bunch of option parts. These are usually in the form of unarmored limbs, different chest pieces, face plates (with water slides to make your own) and extra connectors to help with kitbashing. Koto also has released option body segments to let you swap any part of the body you might want to if the right option isn’t available in the box (~$12). It should be noted the newest kits in this line have brought the price down to $50 as well as reengineered the build to add a lot more articulation and pose-ability.

Also in this lines favor is the articulation and build quality. You’re going to get a nice range of motion with or without armor and some of the smaller details also sometimes come pre painted.

That said Kotobukiya is a company that favors more complex character design over an Out Of Box experience so there’s some smaller details that are etched into the kit but unless your paints them won’t be color correct. I would say this is pretty common across most Koto lines.

Both the FAgirls and Megami Device are scaled at 1/12 so Little Armory guns and the whole market of 3rd party accessories will work with these kits.

Next up is Koto’s Sousai Shoujo Teien which is simple girls as plastic models

A little cheaper and at 1/10 scale instead of 1/12. I’ve not built any but I do know they can bash with Megami Device and Hexa Gear lines just fine. If you take a peek at the JP girpla community there’s actually a niche but healthy group dedicated to taking nice photos of their kits dressed up in everyday scenarios.

Finally the newest line of Koto girl kits is the Arcanadea line.

Purely in a fantasy take these are Incredible kits. I’ve only built one (Lumitea) but it was far and away a much better build experience than the FAgirl kits. These are actually designed by a vtuber artist iirc which is why the designs are so different than other Koto kit lines. If you have the cash and want to try something different I would highly recommend.

Now finally we get to Bandai. After learning from their failures with the Hg Build Fighters girls they went back and designed something solid and what got me into mecha musume: 30 Minute Sisters

Right off the bat with an average price of around $30 the barrier to entry is much easier. While not as refined as the Megami Device line, these simple kits cram in a lot for the price. You’ll get an armored and unarmored form, as well as face plates. However the biggest selling point is How Damn Easy they are to bash. Being apart of the 30M line means they’re completely compatible with the 30MM line of mechs. Which also means all of those extra weapon and armor sets transfer over for the most part. And that’s not even talking about the dedicated 30MS option sets like hair parts, body parts, etc.

This is a Very beginner friendly line of kits and the place I would suggest most people starting if they’re looking to get into mecha musume.

This example I think uses about 5 different kits to build and I don’t believe any serious modifications were needed.

Another Bandai line to mention is the Standard Figurise line which you’ll be familiar with if you’ve picked up the Sulletta, Miorine or ChuChu kits. Typically pretty solid kits (uma musume excluded, only get the 30ms version of that one) they usually include characters from a variety of different shows. These are still of course bash-able but not without modification.

With the explosion of popularity with these kits means we have even more companies now joining in the race. ATK and MS General have a bunch of kits to offer and we see new companies pop up some really sick looking kits (see tgat Galahad)

We even have Plamax giving us the really cool looking GODZ ORDER kits and soon character kits from Blue Archive, Konosuba and others.

For these smaller/third party companies I would suggest doing plenty of research before buying one. The ATK kit that I made was Especially frustrating and required a lot of extra work to make parts fit right or to clean them up so they fit at all. Not to mention the extra detail work required to really make them look like the box example. Just do your homework.

I hope this helps!! It’s a growing market so there’s always more kits being announced. This should have covered the majority of kits out there but IMPORTANT! Check sites like AmiAmi for sales or resales on kits. You can sometimes find an unbuilt kit that retails at $70 going for $30.

USAGS will regularly get Koto kits in and new releases but by no means believe them when they say a kit is USAGS exclusive. Remember to check HLJ as well. Let me know if you have any other questions and I’ll do my best to answer them!!