#programmable keypad

[bandbondemandlockandkeyloc]

Re key Service in lbuquerque NM

B and B On Demand Lock & Key Locksmithing specializes in Re key service in lbuquerque NM, delivering fast and reliable service. We handle car lockouts, re key services, and advanced smart key programming. Our experts install and service biometric keypad locks and digital key systems. Trusted for professional locksmith services wherever you are in Albuquerque.

[ui-alcoholic]

ZX-Spectrum+ 128K (1985)

The appearance of the ZX Spectrum+ 128 is similar to the ZX Spectrum+, with the exception of a large external heatsink for the internal 7805 voltage regulator added to the right hand end of the case, replacing the internal heatsink in previous versions. This external heatsink led to the system's nickname, "The Toast Rack".

New features included 128 KB RAM with RAM disc commands, three-channel audio via the AY-3-8912 chip, MIDI compatibility, an RS-232 serial port, an RGB monitor port, 32 KB of ROM including an improved BASIC editor, and an external num keypad.

The Zilog Z80 processor used in the Spectrum has a 16-bit address bus, which means only 64 KB of memory can be directly addressed. To facilitate the extra 80 KB of RAM the designers used bank switching so the new memory would be available as eight pages of 16 KB at the top of the address space. The same technique was used to page between the new 16 KB editor ROM and the original 16 KB BASIC ROM at the bottom of the address space.

The new sound chip and MIDI out abilities were exposed to the BASIC programming language with the command PLAY and a new command SPECTRUM was added to switch the machine into 48K mode, keeping the current BASIC program intact (although there is no command to switch back to 128K mode). To enable BASIC programmers to access the additional memory, a RAM disk was created where files could be stored in the additional 80 KB of RAM. The new commands took the place of two existing user-defined-character spaces causing compatibility problems with certain BASIC programs. Unlike its predecessors, it has no internal speaker, and can only produce sound from a television speaker.

ZX Spectrum+ 128K, this is a rare model because it was in production for a very short time, as it was immediately replaced by the ZX Spectrum +2.

[papipopsicle]

MERCENARY PART THREE

Pairing: Bucky Barnes X Enhanced!Reader

Genre: angst, fluff

Summary: In which Hydra never seems to give Earth's Mightiest Heroes a break, and while dismantling every known base, they find a weapon. In which this weapon is a young woman whose known nothing but the life Hydra gave her, and a certain super soldier becomes protective of her from the first time they lock eyes. AU AWAY FROM IW&Endgame, ALSO THERE ARE X-MEN

Warnings: swearing, reference to scars

Song: Punching Bag by Palaye Royale

Words: 1.6K

MASTERLIST

feedback is always appreciated

"Stark Industries and and the Wakanda Outreach programme has helped thousands of mutants and inhumans, why don't we just hand her over to them and be done with it?" Kitty Pryde mulled over the idea, rolling her eyes as the clock ticked over into the third hour of bickering.

Y/N's sedation would wear off within the next half hour and the team were still yet to come to an unanimous decision on what to do with her. She was currently fast asleep on a comfy bed inside a room which restricted the use of her powers- but she didn't know that yet.

Bucky had tried his best to remain objective, but as he watched the large monitor streaming footage from her room, he couldn't help but be reminded of the girl he watched grow up into a woman and how he'd already missed four years of her life.

"I'll monster watch tonight, James." Y/N hummed, playing with a small flame at her fingertips. She looked over her shoulder and found him watching her with worried eyes, yet she just smiled, "You haven't slept for three nights in a row now. Trust me, they'd hurt you a lot more if you fail your mission tomorrow than they will if I'm a bit grouchy. Sleep, moya lyubov."

"She'd still be a great addition to the team," Tony sighed, standing up to stretch his legs, "and by team I mean the Avengers, I don't even know why you're here quite honestly."

Kitty flipped him off before storming out, probably going to find Charles or Raven to vent to them about how much Stark pissed her off.

Natasha leant over the table, eyes not moving from the tablet in front of her, "Is she like you were, Barnes?"

Bucky tensed and looked at the redhead, "In what way?" He asked slowly.

Nat glanced over at Tony before finding the super soldier waiting for her response, "Did they manipulate her mind and create triggers that'd turn her into a murder machine? Is she at all loyal to Hydra?"

"Come on, you saw her earlier, Nat, Y/N had tried to escape that many times they had to chain her up." Steve tried to reason as he saw Bucky's flesh hand clench up.

"We should consider every possible angle though, right?" Bruce spoke up from his seat towards the back of the room, propping his glasses on his nose and taking a better look at the security footage, "She seems harmless, but-"

"She is harmless." Bucky stressed, "Sure, when you look at her file you see a genetically engineered super-assassin with elemental powers, but not one day passed without trying to escape or planning our next escape. And okay, fine, she enjoys violence, but Hydra conditioned her to be that way and she's never had anyone to tell her otherwise. At the end of the day, she's scared- and I don't want her waking up alone."

The soldier felt Steve's hand squeezing his shoulder in comfort, but it felt cold and the sentiment felt short. Bucky watched each pair of eyes fall away from his sight and their voices stayed silent. He shook off Steve's hand and left the room, making his way down to the supervisory level. He looked down at the small piece of technology in his hand, matching the number to the cell like room and entering a six digit code into the keypad from memory. A single second later it pinged and the lights turned green.

The one armed man stood in the doorway for a moment, watching Y/N's healing figure peacefully sleeping. It was a sight to behold, even in tattered clothes and a thick layer of grime and dust covering her, she was anything but a weapon. She was soft and even delicate to the eye, resting as if her mind wasn't plagued with the tortured souls from her past.

Bucky sat down on the cool wooden floor, crossing his legs like he used to at the age of eight, playing tic tac toe with a small Steven Grant Rogers. Those memories didn't feel much like his own, more at peace with the ones of war he shared with Y/N.

"Stop pulling your punches, their hands are worse than yours." Nineteen year old Y/N warned James with a sharp whisper. His flesh knuckles were scorched from her most recent attack, goaded to use her powers by the watchful handlers. Metal collided with bone and he knew on impact two ribs had fractured, a further one would bloom with bruises soon enough. Training was often more taxing than the missions themselves, bored Hydra agents pulling on puppeteer strings to ensure they put on a good show.

Y/N estimated another ninety minutes had past before her handler pulled her away for healing observations, for research rather than well-being purposes. It wasn't long until she found herself flung back into the dingy cell with a kick to the back of her knees and an expired first aid kit thrown to the ground beside her.

Once the door cranked shut, James knelt beside the stoic woman he knew was hurting so deeply within. He collected any supplies for sterilisation and allowed Y/N to collapse under his touch. She curled into his chest as he cleaned the wounds he caused, burnt knuckles stung from the movements but that was numb compared to the torment of seeing her in pain.

James was past the point of blaming himself for any injuries Y/N incurred from training and vice versa, too much of their precious time had already been taken away in arguments of how much the other was not at fault. Hydra allowed them one hour a day together, usually after training, to decompress and recover and mostly hold each other. Y/N had a knack for sneaking out of her cell to be with the super soldier, it took more time stopping her, punishing her and hauling her back than their current routine. Teamwork on missions became more efficient, so they were allowed their hour of peace unless it became a weakness.

That was when Y/N was most aware of time passing by, fingers habitually running over the rigid scars between metal and soft flesh as a reminder James was entirely real. He watched between the fire dancing in her free hand and the peace within tired features, her own eyes burning bright at his constant touch. The hour would soon be up, and there was no fight to leave each other other than the lingering fingertips as they were pulled apart.

"You cut your hair-" Y/N's gravelly voice was cut off with a harsh array of coughs, spluttering dust from her cell's destruction stuck in her lungs. She squinted at the bright sterile lighting, everything in the room intensely white with the exception of Bucky and his all black clothing sat at the bottom of her vision.

He dialled the lights down noticing Y/N's discomfort and handed her an unopened bottle of mineral water. Her eyes carefully surveyed his movements, not considering him a threat as she chugged the liquid gratefully.

"Do you like it?" He asked after a few seconds of silence had filled the air, taking a seat at the side of the mattress apprehensively. Four years had passed and although he trusted the woman he thought was dead with his life, she was indeed alive and Hydra could do a lot of damage in much less time apart. He had so many questions, so many missed touches longed for and so little worry that she was no longer his Phoenix.

Even with grime covering her from head to toe, Bucky couldn't take his eyes away from her as she scrunched her nose playfully and answered, "I'll miss your long hair, but this suits you- you look like a person."

Unlike Bucky, whose memories were fuzzy around the edges, for better or worse Y/N held all of hers. She remembered cutting his hair short for a mission the once and wishing Hydra wouldn’t let it grow out again. But seeing him this time was immaculate- he was his own human, and she looked to the dirt and disheveled clothing on her person and knew she wasn’t. Purely what she was engineered to be and not a thing more, a biological weapon owned only by Hydra.

Bucky sensed the mental downward spiral as she scanned herself, brows knitting together and tears welling threatening to fall.

He corralled her away from those cataclysmic thoughts with a cool touch to her hot fingertips, metal thumb running across the back of her hand soothingly. “It took a bit more than a hair cut, but the days I feel like a person outweigh the days I don’t. And we’ll get you there too.”

“Can I start that tomorrow?” Y/N pouted and lay against the plush pillows behind her head, content with the sounds of metal whirring against her skin that only super soldier hearing could pick up on.

The team, fewer members left in the conference room, watched the interaction from the projection. A few more words were shared before Bucky lay down beside Y/N, both infinitely still but continuing the motions on their joint hands. Steve’s chair rolled back a few inches as he eyed Tony, “Listen, I can already see Bucky following if we send her off somewhere, we’ve got to at least try re-humanising her.”

“Great, we adopted another murder machine- when the first one gets lonely, at least now he’ll have company!” Tony held his hands up in defence when Steve didn’t appreciate his humour, “Alright, Cap. We’ll observe, give it a few days and get to work on project no murder and less machine.”

part four?

taglist: @kcd15 @killjoynotes

want to be tagged? comment or send in an ask x

[retrogamingloft]

Invaders for the Interton Video Computer 4000, released in 1982, was a simplified home adaptation of Space Invaders. Players control a laser cannon at the bottom of the screen, moving horizontally to shoot descending alien invaders before they reach the player's position.

However, this version is significantly easier than the arcade original. The invaders move slowly, the challenge is minimal, and the sense of urgency that made Space Invaders so iconic is largely absent. While it retains the core mechanics, it feels more like a casual adaptation than a serious test of reflexes. It features a two-player alternating mode, but unlike many other VC 4000 games, it was released without a keyboard overlay.

The Interton Video Computer 4000, launched in 1978, was a German home console that remained relatively obscure outside of Europe. It was part of the 1292 Advanced Programmable Video System family, a series of consoles sharing the same underlying architecture but released under different brands. Unlike more powerful competitors like the Atari 2600, the VC 4000 lacked a microprocessor, relying on a custom chipset that limited its graphical and audio capabilities. Games typically featured blocky graphics and a limited color palette.

Its controllers combined joysticks and keypads, which could make gameplay cumbersome. While the VC 4000 played a role in early European gaming history, it was quickly overshadowed by more advanced consoles. Invaders is a good example of the system’s limitations, offering a casual adaptation rather than a true arcade challenge.

[easyshoppi-blog]

How to Choose the Right Keyboard: A Comprehensive Guide

Choosing the right keyboard is crucial for comfort, productivity, and even gaming performance. With countless options available, understanding your needs and preferences is key. Here's a guide to help you find the perfect keyboard for your setup.

1. Understand Your Purpose

The first step is to determine how you’ll use the keyboard. Are you a gamer, a professional typist, or a casual user? Gamers might prioritize features like low latency, customizable RGB lighting, and mechanical switches, while professionals and writers might value comfort, durability, and typing speed.

2. Choose Between Mechanical and Membrane Keyboards

Keyboards generally fall into two categories: mechanical and membrane.

Mechanical Keyboards: These are known for their tactile feedback, durability, and precise keystrokes. They come in various switch types, such as Cherry MX, Razer, or Logitech switches, each offering distinct actuation points and feel. Mechanical keyboards are ideal for gamers and typists who value accuracy and speed.

Membrane Keyboards: These are quieter, more affordable, and lightweight. They lack tactile feedback, but they work well for casual users and those on a budget.

3. Switch Types Matter

If you choose a mechanical keyboard, pay attention to the switch type.

Linear Switches (e.g., Cherry MX Red): Smooth and consistent, great for gaming.

Tactile Switches (e.g., Cherry MX Brown): Offer a bump for feedback, ideal for typing.

Clicky Switches (e.g., Cherry MX Blue): Provide tactile feedback with an audible click, preferred by enthusiasts and typists.

4. Ergonomics and Comfort

Ergonomics is critical, especially if you spend long hours typing. Look for keyboards with wrist rests, adjustable height, and ergonomic designs. Split keyboards or those with curved layouts can reduce strain on your wrists and fingers.

5. Keyboard Layout and Size

Keyboards come in different sizes, such as full-size, tenkeyless (TKL), and compact (60% or 75%).

Full-Size Keyboards: Include a numeric keypad and all standard keys.

Tenkeyless Keyboards: Omit the number pad for a smaller footprint.

Compact Keyboards: Save space but may sacrifice functionality. Choose based on desk space and personal preferences.

6. Connectivity Options

Decide between wired and wireless options.

Wired Keyboards: Offer a reliable connection and no need for charging.

Wireless Keyboards: Provide flexibility and a cleaner desk setup, though you’ll need to charge or replace batteries periodically.

7. Additional Features

Look for extra features like backlighting (RGB or monochrome), programmable keys, and media controls. Gamers may benefit from anti-ghosting and N-key rollover for precise input recognition.

8. Budget and Build Quality

Set a budget and consider build quality. Higher-end keyboards often use premium materials, like aluminum, for durability.

In conclusion, the best keyboard is the one that aligns with your needs, preferences, and budget. Whether you’re typing essays or conquering virtual worlds, investing in the right keyboard can significantly enhance your experience.

[gooeygummi]

I bought a programmable keypad to use for different emotes on my stream avatar, and rather than remembering which ones go to what I just put alien emojis over the keys

[sibyl-of-space]

my relationship with technology and apple/microsoft specifically can be perfectly represented by the fact that i am typing this on

a Microsoft ergonomic PS/2 keyboard from the 90s

plugged into an active PS/2-USB converter

plugged into the USB slot on a programmable keypad

that can only be programmed on a Windows device

plugged into a USB-C hub with USB A slots, an HDMI slot, an ethernet slot, and SD/microSD slots

that I bought on NewEgg for half the price of Apple's shitty peripherals

plugged into my M1 MacBook Air, which I actually like rather a lot

[aeillien]

General guide to technology, US edition:

Pre 1980 basically no one has a personal computer. Audio was still primarly records on record players, but some will use cassette tapes with a radio with a cassette player. Movies at home are done via VCR using VCR cassette tapes. Some families have this, most don't. Portable video cameras are specialist equipment only used by professionals. In the 1970's regular cameras, small hand held devices that require loading a film cartridge and have a limited number of shots, become widely available. There is one phone at home which is either a rotary phone or a slightly more modern phone with a dial pad. Both of these require a wired connection.

1980-1990 a very very small minority of households will have home computers, usually the homes of upper middle class professionals and actual programmers. These computers needed a floppy disk (one of the original big ones that was a actually floppy) to boot and then you switched disks to run programs. There's no user interface, it's all done on a command line. Only specialists and some college students will have access to the early internet, which is almost entirely text based. The first walkman (small portable cassette player) is released in 1979, it becomes very popular quickly, but is very much a Young Thing. VCR's become more common as the decade wears on. CD players become available in 1982, they will slowly gain but still be very uncommon until the 90's. The first very chunky cellphones become available in 1983, but are basically play things for the very rich. Many people still use rotary phones, some will have phones with more modern keypad style entry. There is still usually just one phone line in the house and it still requires wires.

1990-2000 rapid expansion of personal computer use as the decade wears on: by 2000 roughly half of families will have one. Near the end of 1980/start of 1990 the smaller "floppy" disks become more common. During the decade some computers will acquire CD readers and software will, around the mid 1990's mostly be sold via CD's. There will usually be one (1) family computer. It will have a CRT monitor attached by wires to a CPU unit or will be CPU and CRT monitor as one unit. Laptops technically exist but are very rare. The ability for regular people to get on the internet really starts around 1992. They connect via modem using their telephone lines, meaning you can't use the phone to call (or vice versa), a frequently source of small grade conflict between young people and parents). The internet is very slow by today's standards and almost entirely text based with some images. Near the end of the decade *some* regular families will begin switching to DSL or cable, which will be the first exposure to modern internet speeds. For many, their first exposure to the internet at modern speeds will be when they go to college. Phones at home will start to become wireless but just within the house: there is a receiver unit plugged in by wire and the speaking unit you can carry around with you. Starting around 1997 or so cell phones that are regular sized and affordable become available and some regular people, but not the majority, will have them. These phones can send texts but do not have internet access or cameras. CD players become more popular as the decade wears on, becoming a significant portion of the means by with The Young will listen to music before the decade is out, but tapes are very much still present. Portable video cameras slowly become more common, but are still their own separate equipment.

2000-2010: We go from regular flip phones in the early 2000's to smartphones with internet access and cameras by the end of the decade. Social media becomes A Thing. Modern LCD monitors begin to arrive. There is an absolute explosion of access to the internet, but most normies are still using modem dialup. The internet starts to switch to its modern video heavy format as the decade wears on but is still mainly text based. Laptops become more common. The first ipod starts selling in 2001 but CD players are still the main way people listen to music.

Younger writers. Please, just know that you could not skip to different songs on a cassette tape, that’s CDs. With tapes you pressed fast forward or rewind and prayed.

Also, VHS tapes did not have menu screens. Your only options were play, fast forward, rewind, pause, stop, or eject.

Y’all are making me feel like the crypt keeper here, I’m begging you 😭

[michaelleafer]

Smart Devices + Rental Homes

Should You Include Smart Home Devices in Your Rental?

When preparing a property as a rental home, naturally you want to create an appealing and upgraded space. You might repaint the walls, replace old flooring, and of course, replace the old locks. You might caulk the windows and add new weather stripping. You might even replace the water heater or HVAC to ensure years of reliable service.

Shopping for the latest home features, you may also come across the desirability of smart home rentals. Smart home devices represent the cutting-edge of home technology, and some features are extremely desirable for modern renters. But is it a good idea for your property? Which of the many smart home upgrades are ideal for rental homes?

We can provide a quick and practical guide to smart home upgrades for any rental property.

Best Smart Home Features for Rental Homes

In the world of smart home design, some devices can make a home feel high-tech and high-quality. These are the best smart home features for a property owner to install before listing the home. In fact, you might even create an opportunity to increase your rental asking price. Here are the top four smart home upgrades that tenants are both practical and highly desired by tenants right now.

Smart Thermostats: Comfortable and Energy-Efficient

A smart thermostat is a programmable thermostat that can make smart decisions based on local and household data. It can remember temperature preferences and learn a family's routine, then optimize for energy efficiency and comfort. It can minimize power use when the house is empty and even adjust based on weather forecasts.

Tenants like smart thermostats because they make comfort easier and reduce the power bills. Investors benefit because they also extend the life of the HVAC and make the property more sustainable.

Smart Locks: Smart, Responsive Security

Smart locks are a useful way to increase home security. A smart lock can be locked using a phone app or voice command, on a schedule, or even based on a tenant's phone distance. This means the doors can lock themselves after dark, when tenants leave the house, and be easily operated by tenants during the day.

Keypad smart locks can even provide a separate code for each family member, codes that only work during certain times of day for guests and services, and create records of which code is used over time.

Smart Lights: Cool, Efficient, and Replaceable

Smart lights are normal screw-in LED light bulbs with RGBW (colorful and white) light options and smart home controls. They are easy to install and energy-efficient. They also make home life more convenient and fun with voice commands and routines instead of light switches.

Leak and Surge Detectors

Wifi leak detectors and surge detectors also provide you with live maintenance information, so that a leak below any sink or appliance or any unusual power fluctuations can be detected and repaired immediately.

Selectively Desirable Smart Home Features

Then there are smart home updates that can be cool, but are not universally desired. These should be installed with consideration for your audience and how each feature might be perceived.

Smart Home Appliances

There are tons of smart-home-capable appliances. Smart fridges that count the eggs, smart ovens that can pre-head with a wifi command, and so on. The usefulness of these appliances is still debatable. Some tenants will delight in having an all-smart kitchen or laundry, and some won't care, and some may think it's silly.

Video Doorbells

Video doorbells are an interesting convenience and security feature, but they're not for everyone. Some people will love being able to see out their front door at all times and use their doorbell as an intercom, but some may be uncomfortable being seen by their own doorbell coming home each day.

Smart Security Systems

Smart security systems are in the same boat. Some people will be excited about having wirelessly watchable security cameras and window alarms, and some will find this uncomfortable. That said, neighborhoods where most homes have security systems are more likely to consider this a positive upgrade.

What Smart Home Features to Avoid 

Lastly, there are a few smart home features that should be left to your tenants to decide on. These are either plug-and-play features that rely on personal preference or features that are a little too personal to share with one's landlord.

Plug-and-Play Smart Home Speakers

Smart lights, smart thermostats, and smart appliances are service-agnostic. This means their control apps can be connected to any smart home system. But the smart speakers decide which smart home assistant and network of services is used.

Let your tenants decide their own smart home core system. They might want Alexa, Apple, or Google, and the choice should be theirs. Plus, most smart home speakers are plug-and-play, making them more like furniture or personal devices rather than installed features like a thermostat or locks.

Smart Security Cameras

Interior security cameras are a touchy subject. If your tenants want internal smart cameras, let them choose, install, and fully control the cameras on their own. This way, there's no worry that anyone else might be watching their home interior.

Smart Home Upgrades for Rental Properties

With the right smart home upgrades,  you can increase the value and desirability of any rental home. From cozy apartments to lavish estates, a few smart home features can make a home feel convenient, comfortable, and cutting-edge. But it's also important to choose your upgrades carefully.

[dropshipautomation]

Optimizing Smart Manufacturing: The Impact of PLCs, HMIs & Industrial Relays

In today’s connected industrial landscape, true automation is more than machine movement—it’s about intelligence, communication, and reliability. At Dropship Automation Solutions, we focus on delivering the components that drive smarter factories and more efficient workflows.

In this blog, we explore three automation essentials: Programmable Logic Controllers (PLCs), Human Machine Interfaces (HMIs), and industrial relays—each critical to seamless operation and real-time control.

1. PLCs: The Brains Behind Automation

What PLCs Do PLCs (Programmable Logic Controllers) are digital computers used to control machines and processes in real time. Designed for harsh environments, they handle logic, sequencing, and decision-making on the factory floor.

Types & Applications

Types: Compact PLCs, modular PLCs, safety PLCs

Applications: Assembly lines, process control, robotics, water treatment

Benefits: Scalable control, high reliability, easy troubleshooting

Why PLCs Matter PLCs provide the backbone of automated systems. Their flexibility allows for modifications on the fly, supporting evolving production needs without major overhauls.

2. HMIs: Bridging Operators and Machines

What HMIs Do Human Machine Interfaces (HMIs) display system data and allow operators to interact with machines. From touchscreens to panel displays, HMIs visualize performance and enable manual adjustments.

Common HMI Types & Uses

Types: Touchscreen panels, web-based HMIs, keypad HMIs

Applications: CNC machine interfaces, packaging machines, energy systems

Benefits: Improved visibility, intuitive control, faster diagnostics

Why HMIs Matter Without a user-friendly interface, managing complex systems becomes difficult. HMIs enhance productivity by offering real-time feedback, alarms, and system insights, empowering human decision-making.

3. Industrial Relays: Automation’s Switching Backbone

What Industrial Relays Do Relays act as electrically operated switches that control circuits by opening and closing contacts in response to signals. They’re used to isolate signals, control large voltages, or manage multiple outputs.

Types & Use Cases

Types: Electromechanical relays, solid-state relays, time delay relays

Applications: Motor control, lighting systems, automation panels

Benefits: Electrical isolation, fast switching, circuit protection

Why Relays Matter Relays enable reliable, repeatable control in automation systems. They manage power efficiently while protecting sensitive control circuits—key to long-term system durability.

A Seamless Control Ecosystem

Imagine an industrial environment where:

PLCs orchestrate system logic with precision,

HMIs provide real-time operator insights and control,

Relays switch circuits smoothly and safely.

This integrated approach results in improved system uptime, enhanced safety, and highly responsive production systems—all with reduced maintenance demands.

Conclusion: Powering Progress Through Smart Components

Modern factories require intelligent, interconnected components to thrive. At Dropship Automation Solutions, we deliver high-performance PLCs, intuitive HMIs, and durable industrial relays to empower your automation journey.

Build a smarter future—today.

📞 Contact: +1 (234) 288-1755 📧 Email: sales@dropshipautomation.com 📍 Location: 1440 W. Taylor St #2555, Chicago, IL 60607

[fromdevcom]

In 2025, the demand for ergonomic office solutions is higher than ever, with standing desks leading the charge in transforming how we work. Designed to combat sedentary lifestyles and promote better posture, standing desks offer a dynamic way to stay active and focused throughout the day. This article presents the best standing desks of 2025, with options for every budget and workspace. Whether you work from home or in a corporate environment, these desks deliver performance, comfort, and adjustability. Why Choose a Standing Desk? Standing desks offer several health and productivity benefits, including: Reduced back pain: Standing periodically throughout the day helps alleviate the stress on your spine. Improved posture: Alternating between sitting and standing helps promote spinal alignment. Increased energy and focus: Standing desks can help reduce fatigue and boost alertness. Better circulation and reduced risk of chronic disease: Moving more during your workday improves overall health. Key Features to Consider When Buying a Standing Desk When evaluating standing desks, consider the following: 1. Type of Adjustment Electric: Smooth, quiet height transitions with the press of a button. Manual/Crank: Budget-friendly but may require effort. 2. Height Range Ensure the desk accommodates your height in both sitting and standing positions. 3. Stability Wobble-free construction is crucial, especially at maximum height. 4. Weight Capacity Check if the desk supports dual monitors, desktops, or accessories. 5. Desktop Material and Size Choose durable, aesthetically pleasing materials in appropriate sizes. 6. Frame Construction Steel frames offer better support and durability. 7. Noise Level Electric desks should operate quietly. 8. Cable Management Look for built-in grommets or trays for clean cable routing. 9. Assembly Pre-assembled parts and user-friendly manuals ease the setup. 10. Warranty and Support Long warranties and responsive customer service add peace of mind. 11. Price Balance features with your budget. Top Standing Desk Recommendations for 2025 1. Vari Electric Standing Desk Key Features: Electric height adjustment Height range: 25" to 50.5" Weight capacity: 200 lbs Solid laminate desktop Build & Stability: Steel T-style legs provide excellent balance Ease of Use: Built-in memory presets Pros: Durable, easy to set up, sleek design Cons: Slightly higher price Ideal For: Home and corporate offices Price (April 2025): ~$750 2. Uplift V2 Standing Desk Key Features: Dual motor electric lift Height range: 25.5" to 51.1" Capacity: 355 lbs Variety of desktop options Build & Stability: Heavy-duty frame, reinforced crossbar Ease of Use: Programmable keypad, accessories-friendly Pros: Highly customizable, ultra-stable Cons: Premium price Ideal For: Professionals, tech setups 3. FlexiSpot E6 Electric Standing Desk Key Features: Dual motors Height range: 22.8" to 48.4" Capacity: 355 lbs Multiple sizes and finishes Build & Stability: Advanced frame support Ease of Use: Child lock, memory settings Pros: Affordable, reliable Cons: Fewer desktop finishes Ideal For: Budget-conscious users 4. Branch Duo Standing Desk Key Features: Dual motors, anti-collision Height: 25" to 52" Capacity: 275 lbs Build & Stability: Solid steel frame Ease of Use: Easy controls, smooth motion Pros: Sleek, modern design Cons: Limited color options Ideal For: Small office spaces, stylish setups Price (April 2025): ~$699 5. Autonomous SmartDesk 2 Key Features: Electric dual motor Height: 29.4" to 48" Capacity: 300 lbs Build & Stability: Steel frame, solid wood top Ease of Use: Smooth adjustment, simple keypad Pros: Affordable, minimalist

Cons: Basic design Ideal For: Students, startups 6. IKEA Bekant Standing Desk Key Features: Electric motor, straightforward design Height: 22" to 48" Capacity: 154 lbs Build & Stability: Sturdy but less weight capacity Ease of Use: Simple up/down toggle Pros: Affordable, IKEA warranty Cons: Lower load limit Ideal For: Casual users, IKEA fans 7. FEZIBO Electric Standing Desk (Budget Pick) Key Features: Electric lift, anti-collision Height: 27.6" to 47.3" Capacity: 176 lbs Build & Stability: Iron frame, solid MDF top Ease of Use: Control panel with memory presets Pros: Budget-friendly, reliable performance Cons: Less premium feel Ideal For: Budget-conscious buyers, students Price (April 2025): ~$289 Comparison Table DeskHeight RangeCapacityPriceBest ForVari Electric Desk25" - 50.5"200 lbs$750Home/Corporate UseUplift V225.5" - 51.1"355 lbs$799Custom SetupsFlexiSpot E722.8" - 48.4"355 lbs$499Value SeekersBranch Duo25" - 52"275 lbs$699Modern WorkspacesAutonomous SmartDesk 229.4" - 48"300 lbs$499Minimalist UsersIKEA Bekant22" - 48"154 lbs$429Casual UsersFEZIBO (Budget Pick)27.6" - 47.3"176 lbs$289Budget Buyers Conclusion: Invest in Your Health & Productivity A standing desk is more than just furniture—it’s a commitment to a healthier, more efficient work lifestyle. Whether you're outfitting a home office or optimizing your company workspace, the right desk can make all the difference. From high-end models like the Uplift V2 to budget-friendly options like the FEZIBO Electric Desk, there's something here for every need and price point. Explore your options and take a stand for better posture, energy, and productivity in 2025.

[kouwishop]

Weatherproof Mechanical Keyless Password Door Security Lock for Home Office

Specifications: Mechanical lock, does not requires battery or extra wires Keyless Mechanical lock, unlock by code without any keys Programmable unlock code up to 11 digits All-weather operation – Functions in severe temperature 13-digit alphanumeric keypad and clear key Easy to install User friendly Fits in both right and left opening doors Applicable for door with 35-60 mm thick door Swing…

[retrogamingloft]

Super-Space for the Interton Video Computer 4000, released in 1978 as Cassette 40, is a poor attempt at cloning Defender. While it aims to replicate the side-scrolling spaceship shooter experience, it falls drastically short. Clunky controls, jerky scrolling, and simplistic enemy behavior make for an unresponsive and frustrating experience—where, ironically, the real challenge comes not from the enemies but from the game's own design flaws, particularly the absence of a map. The rudimentary graphics, even by VC 4000 standards, only add to its shortcomings, and the action never comes close to matching the intensity of its inspiration.

Players pilot a spacecraft, shoot down enemies, and attempt to defend bases. Each time you clear a wave, you can enter the bases to restore your health. The problem is, you start with eight bases, but they’re quickly destroyed by enemies you can’t even see, let alone locate. It becomes obvious right away that the real challenge isn’t defending anything—it’s simply surviving for more than a couple of minutes. Enemies are easy to shoot down once you find them, but since you lack the tools to track or anticipate their movements, the game quickly devolves into a battle against its own limitations.

Unfortunately, these fundamental flaws drain any real engagement. Rather than delivering a true arcade challenge, Super-Space feels like a rough, uninspired approximation of one.

The Interton VC 4000, launched in 1978, was a German home console with limited distribution outside Europe. Part of the 1292 Advanced Programmable Video System family, it shared hardware and software compatibility with similar consoles under different brands. Unlike more advanced competitors like the Atari 2600, the VC 4000 lacked a microprocessor, relying instead on a custom chipset, which restricted its graphical and gameplay capabilities.

Its controllers, combining joysticks and keypads, made gameplay cumbersome. While the VC 4000 played a role in early European gaming, it was quickly overshadowed by superior systems. Super-Space exemplifies the system’s limitations, offering a weak and uninspired attempt at a space shooter that fails to capture Defender's excitement.

[atplblog]

Price: [price_with_discount] (as of [price_update_date] - Details) [ad_1] The Sony Home Theater Remote is designed to control Sony home theater systems and offers a variety of functionalities to enhance your audio and video experience. Here’s a general description of such remotes: Key Features: Design: Sleek and ergonomic for comfortable use. Compact and lightweight, with well-spaced buttons for easy operation. Button Layout: Power Button: Turns the home theater system on/off. Input Selection: Allows switching between audio/video input sources like TV, DVD, AUX, USB, etc. Volume Controls: Separate buttons for increasing or decreasing the volume and muting the audio. Playback Controls: Play, pause, stop, rewind, fast forward, and skip track buttons for media playback. Sound Modes: Direct buttons to toggle sound modes such as cinema, music, night mode, or custom settings. Menu Navigation: A navigation pad for accessing and navigating through the home theater settings menu. Special Functions: Buttons for bass/treble control, equalizer settings, and surround sound adjustments. Numeric Keypad: For selecting specific tracks, channels, or presets. Connectivity: Infrared (IR): Standard control method requiring a direct line of sight to the home theater system. Bluetooth Pairing (optional): For controlling newer models wirelessly. Multi-Device Control: Some remotes may allow control of both the home theater and connected devices like TVs or Blu-ray players. Battery Powered: Usually powered by AAA batteries. Customization: Advanced models may allow programmable buttons for user-defined functions or shortcuts. Compatibility: Works with Sony-branded home theater systems, ensuring optimal compatibility and performance. Universal remotes may also work with Sony systems if programmed correctly. 【MODEL NAME】:Compatible with Sony Remote Control fit for AV Receiver (DOES NOT WORK FOR TV) Remote Model No.: sony SA-D10 SA-D100 SA-D40 Home Theater and Speaker System. Best Substitute for your Original remote 【SETUP】 – There's no need for programming or setup. However, the model requires insertion of 2 brand new AA Batteries (batteries not included) before operation. New upgraded smart chip, feature with over 20 feet farther transmitting distance & stable performance which helps in easy replacement of your missing or damaged remote. 【COMPATIBLE】: Compatible Remote Control for Sony SA-D10 , Sony SA-D100 ,Sony SA-D40 Long Distance range can be operated from any corner of the room. 【PACKAGE INCLUDES】: 1 * Sony AV Audio Remote Control (No Batteries Included). 【FREQUENTLY ASKED QUESTIONS】: (1.) Batteries Included? Not included. (2.) Not Working Properly at first Use? Please do not insert batteries from old remote control. Please make sure you put on brand new batteries while first use. (3.) Doesn't Support? Please make sure your original remote looks back to back like our displayed remote. [ad_2]

[vipgaragedoorrepair]

How Can Garage Door Keypad Installation Transform Your Home Security?

Garage door keypads are a fantastic addition to your home. They provide convenience, enhance security, and eliminate the need for traditional keys. With a garage door keypad installation, you can easily enter your garage without fumbling for keys. This article will guide you through everything you need to know about installing a garage door keypad, answering common questions, and providing insights to make the process smoother.

Why Choose Garage Door Keypads?

Garage door keypad installation has become increasingly popular among homeowners. They offer a range of benefits that make them an attractive option. Here are some compelling reasons to consider:

Convenience: No more hunting for keys! With a keypad, you can enter your garage effortlessly.

Enhanced Security: Keypads reduce the risk of unauthorized access. You can easily change the code if you suspect it has been compromised.

Temporary Access: Need to give a friend or family member access? You can provide them with a temporary code.

Increased Property Value: Installing a keypad can enhance your home's appeal to potential buyers.

With these benefits in mind, let's explore the installation process and common questions surrounding garage door keypad installation.

Benefits of Garage Door Keypad Installation:

1. Enhanced Security

Code Protection: Keypads allow you to create a unique code that can be easily changed if compromised, reducing the risk of unauthorized access.

No Physical Keys: Eliminates the risk of lost or stolen keys, which can be a vulnerability in traditional locking systems.

2. Convenience

Easy Access: Quickly enter your garage without needing to find keys, especially when your hands are full.

Multiple Codes: Many keypads allow for multiple user codes, making it easy to give access to family members, friends, or service personnel.

3. Temporary Access

Guest Codes: You can provide temporary codes for visitors, ensuring they have access without giving them a permanent key or code.

Home Service Access: Allow service providers to enter without needing to be present, facilitating maintenance or deliveries.

4. Increased Property Value

Modern Feature: Garage door keypads are seen as a desirable feature that can enhance the appeal of your home to potential buyers.

Smart Home Integration: Many keypads can integrate with smart home systems, making them more attractive in the current market.

5. Ease of Use

User-Friendly Design: Most keypads have straightforward programming and use, making them accessible for all family members.

Backlit Keys: Many models come with backlit keys, allowing easy access at night or in low-light conditions.

6. Cost-Effectiveness

DIY Installation: Many homeowners choose to install keypads themselves, saving on professional garage door keypad installation costs.

Long-Term Savings: Enhanced security can reduce insurance premiums, as some companies offer discounts for homes with improved security measures.

7. Flexibility

Portable Access: If you ever move, you can take your keypad with you and install it at your new home.

Easily Programmable: Changing the code is quick and straightforward, allowing you to update access without hassle.

Frequently Asked Questions

1. How Do I Choose the Right Keypad?

Choosing the right keypad is essential. Look for features like weather resistance, backlit keys, and ease of programming. A keypad that integrates with your existing garage door opener is also beneficial.

2. What Tools Do I Need for Installation?

You’ll need a few basic tools for a garage door keypad installation:

Screwdriver

Drill

Level

Measuring tape

3. Can I Install It Myself?

Yes! Many homeowners choose to install their garage door keypads themselves. It’s a straightforward process that can save you money. However, if you're uncomfortable with DIY projects, hiring a professional is a good option.

4. How Long Does Installation Take?

Typically, a garage door keypad installation can be completed in about 30 minutes to an hour. If you are prepared and have all the necessary tools, the process can be even quicker.

5. Do I Need to Program the Keypad?

Yes, programming is necessary for your keypad to work. Most models come with a user manual that outlines the programming steps.

6. How Do I Change the Code?

Changing the code on your keypad is easy. Most keypads allow you to do this through a simple process in the user manual. Regularly changing your code enhances security.

7. What If I Forget the Code?

If you forget your code, most keypads have a reset function. This feature often requires you to use a physical key or a reset button on the garage door opener itself.

Step-by-Step Installation Guide

Now that we've addressed some common questions, let's dive into the installation process. Here’s a simple step-by-step guide to ensure a successful garage door keypad installation:

Step 1: Gather Your Tools and Materials

Ensure you have all the tools and materials required. This will make your garage door keypad installation process smoother and faster.

Step 2: Select the Installation Location

Choose a location that’s easily accessible but out of reach of potential tampering. The side of the garage door frame or wall is typically ideal.

Step 3: Mark the Position

Use your measuring tape and level to mark the desired position for the keypad. Ensure it is at a height comfortable for adults and children.

Step 4: Drill Holes

Once the position is marked, drill holes for the screws. Be cautious not to damage any wiring behind the wall.

Step 5: Attach the Keypad

Attach the keypad securely using screws. Make sure it is firmly in place and level.

Tips for Effective Use

Once your garage door keypad installation is complete, here are some tips to maximize its effectiveness:

Choose a Unique Code: Avoid using easily guessable codes, such as birthdays or sequential numbers.

Regularly Change Your Code: Changing your access code every few months can greatly enhance security.

Inform Family Members: Make sure everyone who needs access knows the code and understands how to use the keypad.

Installing a garage door keypad is a smart move for any homeowner. The garage door keypad installation process is straightforward and brings numerous benefits, including enhanced security and convenience. By following the steps outlined in this guide, you can enjoy the ease and peace of mind that comes with having a reliable garage door keypad.