#and interfacing and batting materials and and and....

[brawnsleloenigmadoublesonic]

Tfp Bee being a little SLUT with his pretty optics and whore waist, knowing he's hot asf and like prime (lol) interface material 4 autobots and Decepticons. Anyway he gets captured by breakdown on patrol and instead of fighting back he's batting his optics and subtly swaying his hips juuust right to where breakdown pounces (I know knock out would usually be pissed but I feel like he would plug in that gayass psychic patch and watch them fuck idk) Breakdowns fuckin massive yknow and bees small for his frame type so his valve is damn near torn in like 5 different places by the time Breakdown comes to his senses and continues taking Bee 2 the nemesis (Bee is barely coherent, he cannot feel his stabilizers, his valve is so sensitive)

They arrive and instead of putting his little slut self in the brig like Megatron told them to, Soundwave takes Bee down to Shockwaves lab (for reasons)

They arrive and bees finally awake and not freaking out cuz he decided if Breakdown felt that nice, how good are Shockwave and Soundwave gonna be..

He's immediately chained to the ceiling with his chest facing the floor, unable to touch the ground.

He's shaking w excitement as he feels Shockwave shove into his valve while Soundwave forces his intake open and forces his entire spike down Bee's throat.

Hours and Hours of interfacing later and they've gathered an audience, star, megs, Knockout, even Arachnid..

Bee knows they'll have their turns with him and he can't wait..

Few days later Op gets sent a file from the nemesis w videos upon videos of Bee being a little slut for all the big bad Decepticons, he gets so hard so fast he nearly pops his panels at the sight of Bee's face, absolutely fucked out of his processor, dumb little smile..

Wrote this 2 get out of writers block

Thanks 4 the Bots Brawn!!

-Yang

Woooo you're welcome! This was funnn what payment do you take my friend?? Cookies or kisses? I make exceptions for allergies, we also have brownies. Celery if you dislike sweets

Megs probably threw a fit over Bee not being in the brig until he saw that scout getting fucked stupid between his two best soldiers, dangling in the air. His spike is so hard so fast he almost passes out and Knockout gets surprisingly worried about him. (He just wants an excuse to see their leaders spike)

[beckysquiltingagain]

Hello! I just discovered your blog and I love all your art pieces! They're so amazing and the colours are incredible 💜

I've actually been considering getting into quilting, but I don't have many materials (no sewing machine, not a lot of fabric, etc). Do you have any tips for people who are trying to get into quilting?

There is no bad place to start. For real! I started super simple with 5” squares and played around with different layouts. Don’t have a machine? JoAnn’s has a teal sewing machine for $100 that sews super smooth without a ton of confusing extras. Start by working on keeping a consistent 1/4” seam. Fabric, thread, any sewing machine, and imagination are all you need to start. another fun thing you could do to start, draw a picture with different shapes. And then get double sided fusible interfacing. Draw the shapes on the interfacing, then iron to the back side of fabric, cut the shape out. Remove the paper and iron the shapes onto a larger piece of fabric, similar to your drawing. And now you have a quilt top. Make a sandwich out of it with the top, batting, and a backing fabric and sew straight lines across it. for more ideas, check out YouTube. It’s full of free instructional videos on quilting. but most of all, have fun with it!

[eclecticreviewpeace]

SANYO KR1.2SCH-3(RC03911) 1200mAh/4.32Wh 3.6V NI-Cd Replacement Battery

You need a new SANYO KR1.2SCH-3(RC03911) Replacement Battery . Our high quality SANYO KR1.2SCH-3(RC03911) Replacement Battery for sale.We will refund you within 30 days! If the product is not what you expected or if you changed your mind, you will be completely reimbursed.

https://uk-online.co.uk/ppimageb/KR1.2SCH-3.jpg

Brand New SANYO KR1.2SCH-3(RC03911) replacement battery for SANYO Devices & Electronics 1200mAh/4.32Wh 3.6V

SPECIFICATIONS:

https://uk-online.co.uk/ppimageb/KR1.2SCH-3.jpg

Other online shop for SANYO KR1.2SCH-3(RC03911)

JP: SANYO KR1.2SCH-3(RC03911) バッテリー FR: SANYO KR1.2SCH-3(RC03911) Batterie ES: SANYO KR1.2SCH-3(RC03911) batería IT: SANYO KR1.2SCH-3(RC03911) batteria PL: SANYO KR1.2SCH-3(RC03911) Zgodna Bateria US: SANYO KR1.2SCH-3(RC03911) battery

High standard SANYO KR1.2SCH-3(RC03911) Battery

Features of Our Rechargeable Battery for SANYO KR1.2SCH-3(RC03911) replacement battery:

1. Each Rechargeable Battery for SANYO KR1.2SCH-3(RC03911) replacement battery is made of high-quality lithium-ion battery, which is longer than the last time.

2. The battery is up to standard and fully compatible with original specifications.

3. All our batteries are certified by CE, UL, ROHS, ISO9001/9002 as safe products.

We specialize in providing high-quality batteries. The Rechargeable Battery for SANYO KR1.2SCH-3(RC03911) has passed tests according to Security Standards to ensure battery's quality. The interface metal and solid insulators of the Rechargeable Battery for SANYO KR1.2SCH-3(RC03911) are made of Premium materials to ensure stable current input and durability. Round-sealed package ,faster delivery and thoughtful after-sales service will make you feel assured to purchase.UK-online.co.uk is the home of British most comprehensive laptop batteries,dell Laptop Battery,and ac adapters website. Wholesale or retail laptop batteries and laptop adapters with high quality & low price. Just enjoy your digital life with a new laptop battery.

Related Products:

Omron CPM2A-BAT01 replacement battery for Omron CPM2A CQM1H ER3V, Rating: 1000mah 3.6v

MOONS DC700B replacement battery for MOONS MS724, Rating: 4800mAh/36.96Wh 7.7V

SONY SP65M replacement battery for Sony PlayStation PS Vita 1000 PCH-1001 PCH-1101, Rating: 2210mAh/8.18Wh 3.7V

OLYMPUS LI-30B replacement battery for OLYMPUS u-mini Stylus Verve DigitalS, Rating: 800mAh/2.96WH 3.7V

Honeywell BAT-SCN04 replacement battery for Honeywell 1932G 50139108-001, Rating: 2500mAh/9.0Wh 3.6V

M3 MCB-6000S replacement battery for M3 Mobile eTicket, Rating: 2200mAh 3.7V

CANON BP-820 replacement battery for CANON Legria FS21 FS22 FS36 FS37 FS46 FS200 FS305 FS306 FS307 FS406, Rating: 1700mAh/13WH 7.4V

HUWEI H94X-BAT replacement battery for HUWEI H94X-BAT PDA, Rating: 4700mAh/17.86Wh 3.8V

GOSUNCN P3050B replacement battery for GOSUNCN GM-G4, Rating: 3050mAh/11.59WH 3.8V

Canon NB-8L replacement battery for Canon PowerShot A3300 A3200 A3100 A2200 A1200 CB-2LA, Rating: 740mAh 3.6V

Why Buy KR1.2SCH-3(RC03911) Battery From Here?

With the international Standard Control from R&D, Manufacturing and test, Our battery for KR1.2SCH-3(RC03911) have passed CE, UL, ROHS, ISO9001,QS9000 and TS16949. At least Save up to 30% from our site battery shopping. We can provide cheap and high quality KR1.2SCH-3(RC03911) batteries to benefit our customers. We provide timely delivery to our customers. We will shipping the battery immediately after got your payment. It is usually take 7-15 business days for you get the replacement KR1.2SCH-3(RC03911) battery.

SANYO Battery (Our Popular Products )

SANYO 5HR-AAC replacement battery for SANYO Twicell MDF-137 MDF-U333, Rating: 2000mAh/12Wh 6V, SKU: 24KK81S1_Oth

SANYO DB-L20 replacement battery for SANYO Xacti VPC-C5 VPC-C5E VPC-C5EX VPC-C6 VPC-C5GX VPC-CA6 VPC-CA65, Rating: 900mAh 3.7V, SKU: 19LW045_7_Oth

SANYO DB-L40 replacement battery for SANYO DMX-HD1 DMX-HD1A DMX-HD2 DMX-HD700 DMX-800 DMX-E760 DMX-875 DMX-1075, Rating: 1200mAh 3.7V, SKU: 19LW120_Oth

SANYO DB-L20 replacement battery for SANYO Xacti DMX-C1 DMX-C4 DMX-C4D DMX-C4L DMX-C4N DMX-C4S DMX-C6S, Rating: 900mAh 3.7V, SKU: 19LW045_1_Oth

SANYO CR17450SE-R replacement battery for SANYO A02B-0200-K102 A98L-0031-0012 Brown Plug 10pcs, Rating: 2500mAh 3v, SKU: SA1801A_PLC_Oth

SANYO DB-L20 replacement battery for SANYO Xacti VPC-CA9 VPC-CA9BK VPC-CA9EXBK-B VPC-CA9EXG-B VPC-CA9EXR-B VPC-CA9G, Rating: 900mAh 3.7V, SKU: 19LW045_8_Oth

SANYO 4N-600AA replacement battery for SANYO Terumo ES-P110, Rating: 600mAh/2.88Wh 4.8V, SKU: 22KK137_Oth

SANYO 3/N-600AAC replacement battery for SANYO 70360 503 513, Rating: 600mAh 3.6V, SKU: 24KK80S7_Oth

SANYO 10N-1200SCK replacement battery for SANYO 10N-1200SCK 10N1200SCK, Rating: 1200mAh/14.4Wh 12V, SKU: 24KK1011S_Oth

SANYO DB-L20 replacement battery for SANYO Xacti DMX-CG9 DSC-C DSC-C5 DSC-E6 DSC-J4 VPC-C1 VPC-C1EX VPC-C4S, Rating: 900mAh 3.7V, SKU: 19LW045_5_Oth

[angelrojas28]

Brave on iOS and Android: Feature Comparison

The Brave browser has become a popular choice for mobile users who value privacy, speed, and a seamless browsing experience. Available on both iOS and Android, Brave offers a range of features designed to enhance mobile web browsing. While the core philosophy remains consistent across platforms, there are subtle differences between the iOS and Android versions that could influence your decision. Here’s a detailed comparison to help you choose the best version for your needs.

Core Features of Brave on iOS and Android

Both versions of Brave share the following key features:

Privacy Protection: Automatically blocks third-party ads and trackers.

Speed: Pages load up to three times faster due to ad and tracker blocking.

BAT Rewards: Earn Basic Attention Tokens (BAT) by viewing privacy-respecting ads.

HTTPS Everywhere: Ensures secure connections on supported websites.

Private Browsing: Includes Incognito mode and Tor (Onion Routing) for added privacy.

Platform-Specific Feature Comparison

While the core features are the same, there are notable differences between the iOS and Android versions.

User Interface and Experience

iOS: Follows Apple’s design guidelines, offering a sleek and cohesive experience. Supports iOS-specific gestures like swiping to navigate. Uses WebKit, the same engine as Safari.

Android: Follows Material Design principles, providing a familiar experience for Android users. Offers greater customization options and uses the Blink engine, aligning with the desktop version of Brave.

Ad Blocking and Privacy

iOS: Robust ad blocking integrated with Safari’s content-blocking capabilities.

Android: Built-in ad and tracker blocking with granular control over what to block or allow.

Sync and Account Management

iOS: Sync functionality is available, though some users report occasional delays.

Android: Sync performance is smoother, with additional options like syncing open tabs.

Unique Features

iOS Exclusive Features

Safari Integration: Brave can act as a content blocker within Safari.

iOS Shortcuts: Leverages the iOS Shortcuts app for quick access to Brave functionalities.

Android Exclusive Features

Brave Rewards: Full-featured rewards system with deeper integration.

Extensions: Supports a growing range of browser extensions.

Default Browser: Can be set as the default browser with full functionality.

Summary

Brave offers a fast, secure, and privacy-focused browsing experience on both iOS and Android. While the core features are consistent, the Android version provides slightly more flexibility and customization, thanks to its open ecosystem. On the other hand, the iOS version integrates seamlessly with Apple’s ecosystem, offering a polished and cohesive experience.

For a more in-depth look at the differences between Brave on iOS and Android, check out this link: Brave on iOS and Android: Feature Comparison.

Whether you’re an iOS or Android user, Brave is a powerful browser that prioritizes your privacy and enhances your browsing experience. 😊

[allrenoco]

Home Renovations Starts with the Allreno Bathroom Renovation App

In an era where technology seamlessly integrates into our daily lives, Allreno stands out as a game-changer in the world of home improvement. The Allreno Bathroom Renovation App is not just another tool; it is an innovation that redefines how homeowners and professionals approach bathroom design and renovations. With features tailored to meet diverse needs, Allreno combines functionality, convenience, and cutting-edge technology to create an unparalleled user experience.

Streamlining Bathroom Renovations

Renovating a bathroom can be a daunting task, often involving multiple steps, from conceptualizing a design to sourcing materials and coordinating with contractors. The Allreno Bathroom Renovation App simplifies this process by bringing everything under one roof. Users can explore a vast range of bathroom vanities, tiles, fixtures, and other bathroom products through an intuitive interface that makes selection and customization effortless.

The app’s bathroom design feature enables users to visualize their dream spaces in real time. With advanced tools powered by generative AI, users can experiment with layouts, color schemes, and product placements. This ensures every detail is considered, reducing the guesswork and making the design process enjoyable and efficient.

Bridging Real Estate and PropTech

The Allreno app is not just for homeowners; it is a valuable asset for real estate professionals and property developers. The growing trend of integrating PropTech (property technology) solutions into real estate highlights the demand for tools that enhance property value while improving operational efficiency. Allreno’s features align perfectly with this trend by providing an easy-to-use platform for designing modern, functional bathrooms that elevate the appeal of any property.

Real estate professionals can leverage the app to showcase potential bathroom upgrades to clients, providing a tangible vision of the space’s potential. This not only accelerates decision-making but also helps close deals faster by highlighting the added value of a well-designed bathroom.

Quality Bathroom Products at Your Fingertips

Allreno takes pride in offering a curated selection of premium bathroom vanities and other products. From sleek, minimalist designs to more traditional options, the app ensures there is something for every aesthetic preference. By partnering with top manufacturers and suppliers, Allreno guarantees quality and durability, making it easier for users to find products that combine style and functionality.

The app’s product recommendations are powered by smart algorithms that consider the user’s preferences, budget, and design goals. This personalized approach enhances the shopping experience, ensuring users find exactly what they need without sifting through endless options.

A Seamless Experience for Professionals

The Allreno app is not just a homeowner’s dream; it is also designed to empower professionals in the renovation industry. Contractors, interior designers, and retailers can use the platform to streamline their workflows, collaborate with clients, and manage projects more efficiently.

By integrating Allreno into their operations, professionals can:

Share design proposals directly with clients.

Access a centralized hub for managing orders and project timelines.

Gain insights into trending products and design styles.

This multifaceted approach makes the app a versatile tool that benefits all stakeholders in the renovation process.

Why Choose Allreno?

The Allreno Bathroom Renovation App stands out because of its commitment to innovation, user satisfaction, and quality. Whether you are a homeowner dreaming of a luxurious bathroom retreat or a professional looking to enhance your services, Allreno delivers unmatched value.

Key features include:

AI-powered design tools: Simplify and accelerate the design process.

Extensive product catalog: Discover high-quality bathroom vanities and accessories.

Collaboration tools: Foster seamless communication between clients and professionals.

Time and cost efficiency: Achieve exceptional results faster and more affordably.

Embrace the Future of Renovation

The Allreno Bathroom Renovation App is more than just a tool; it’s a platform that revolutionizes how we approach home improvement. By combining cutting-edge technology with an extensive range of bathroom products, it empowers users to transform their spaces with ease.

Download the Allreno app today and experience the future of bathroom renovation. Whether you’re enhancing your home’s value or reimagining your personal sanctuary, Allreno is your partner in making your vision a reality.

Tags: ai design, bathroom renovation, renovation, bathroom design, interior design

[veryutils]

VeryUtils AI Image Background Remover Command Line Software for Windows Developers Royalty Free

VeryUtils AI Image Background Remover Command Line Software for Windows Developers Royalty Free.

In today's fast-paced digital world, creating visually appealing content is crucial for businesses and developers alike. However, removing backgrounds from images can be a time-consuming and labor-intensive task. Enter the VeryUtils AI Image Background Remover Command Line Software—an innovative solution that leverages the power of artificial intelligence and automation to streamline this process.

https://veryutils.com/ai-image-background-remover-command-line

✅ What is VeryUtils AI Image Background Remover Command Line Software?

The VeryUtils AI Image Background Remover is a command line tool designed specifically for Windows developers. It provides an efficient way to remove image backgrounds automatically, allowing you to focus on what really matters—creating stunning visuals for your projects. This software is offered as a royalty-free tool, meaning it can be redistributed as part of your own applications without additional licensing fees.

✅ VeryUtils AI Image Background Remover Command Line Key Features:

AI-Powered Background Removal: Utilizing advanced AI algorithms, this tool can accurately detect and remove backgrounds from images, leaving you with clean, professional results.

Command Line Interface: Ideal for developers, this software operates through a command line interface, making it easy to integrate into existing scripts or web applications. This flexibility allows for batch processing of thousands of images in one go.

Versatile Usage: Whether you want to remove the background from a single image or batch process images stored across multiple directories, the VeryUtils AI Image Background Remover has you covered.

✅ How to Use the VeryUtils AI Image Background Remover Command Line Software?

The VeryUtils AI Image Background Remover is designed for ease of use. Below are some examples of how to utilize this tool effectively:

✅ Removing Background from a Single Image

To remove the background from a single image file, use the following command:

removebg.exe -$ XXXXXXXXXXXXXXXX -i test.jpg -o out.png

This command processes test.jpg and saves the output with the background removed as out.png.

✅ Batch Processing of Images

If you have a folder full of images, you can easily batch process them with a simple loop command:

for %F in (D:\temp*.jpg) do removebg.exe -$ XXXXXXXXXXXXXXXX -i "%F" -o "%~dpnF.png"

This command will remove the background from all JPEG images in the D:\temp directory and save them with the same name and location, but with a .png extension.

✅ Recursive Batch Processing

To process images in a folder and all its sub-folders, use the following command:

for /r D:\temp %F in (*.jpg) do removebg.exe -$ XXXXXXXXXXXXXXXX -i "%F" -o "%~dpnF.png"

This command processes all JPEG files recursively within D:\temp and its subfolders.

✅ Using a Batch File for Automation

For more complex or repeated tasks, you can create a batch file (.bat) using the following format:

for %%F in (D:\temp*.jpg) do removebg.exe -$ XXXXXXXXXXXXXXXX -i "%%F" -o "D:\out_out_%%~nF.png"

This script will automate the background removal process for all images in the specified directory.

✅ Get Started Today

The VeryUtils AI Image Background Remover Command Line Software is available for a free trial, allowing you to test its capabilities on your desktop. Its flexibility and ease of integration make it an invaluable tool for developers who need to process large volumes of images quickly and efficiently.

Whether you're developing web applications, creating marketing materials, or simply looking to streamline your image processing tasks, the VeryUtils AI Image Background Remover Command Line Software offers a powerful solution that saves time and enhances productivity. Start your free trial today and see the difference AI-powered automation can make!

[messungauto]

Understanding PLC controller error codes

Programmable Logic Controllers (PLCs) are the household names in all industries today. And with good reason. By automating repetitive tasks and bringing down manual effort, PLCs have revolutionized manufacturing assembly lines, material handling and many other industrial processes. PLCs though highly tolerant of extreme conditions and hardy can encounter issues from time to time even with regular maintenance. In this article, we are looking at PLC error codes and why they occur. Before we deep dive into the error codes, let us first understand the issues PLCs commonly show. 

Memory error

The PLC’s memory is one of the most important components of the device. It holds the information, input details and other data necessary for correct working. If the PLC’s memory encounters an error, it can lead to data corruption and information loss which can be devastating for the organization. Memory errors can occur in the hardware or software. Depending on the nature 

Causes

Corrupted memory files is often the root of memory errors.

Memory space can get exhausted and you might get this error due to insufficient space in your PLC memory.

Memory chips can be defective or get corrupted. This is an example of hardware issues giving rise to memory errors.

Troubleshooting

Perform a thorough check of your PLC Setup and the memory allocation. Select the memory diagnostic option. It will detect corrupted data for you. You may need to reinitialize the memory and re-upload the program. In case of space issues, you need to increase the memory capacity. If there are faulty memory hardware components, you may need to replace them.

Network and communication error

PLCs need to communicate with networks, input and output devices, HMIs (Human-Machine Interfaces) or other PLCs to work seamlessly. These errors occur when network communication between the PLC and other devices fails. 

Causes

Like all devices, loose or damaged cables and connectors can lead to issues in smooth communication.

Network congestion or incorrect network setting can also be the reason behind communication failure. 

Faulty network hardware is another cause of network errors. 

Troubleshooting

Verify network settings and ensure compatibility between devices. Use diagnostic tools to identify communication errors and rectify them. Reduce network traffic and check if the device has good bandwidth allocation. Look for defective network hardware and replace them.

Other PLC errors

Faulty Inputs or Outputs: Input information and output are the vital aspects that define PLC functioning. Input/output modules must be inspected regularly for loose wiring or damaged connections or components for healthy operations. 

Programming Errors: Carefully review the PLC program for logical or syntax errors. Use debugging tools to identify and rectify programming mistakes. Document changes to ensure proper version control.

Error codes

Don’t let PLC error codes daunt you. If you know your error codes, you can easily prevent them from bringing your operations to a halt. Usually, you will see error codes flashing on the display. Depending on the build and type of your PLC, error codes might also be displayed as LED indicators. 

Remember errors can be indicated in different formats. Errors are usually of two kinds: numeric, such as E001 or F002, or alphanumeric, such as PWR or CPU. Some PLC error codes are generic, such as ERR or FAIL, while others are specific, such as OVLD or BAT. For a more comprehensive understanding of the errors your PLC might show, you should consult your PLC manual or online resources to find out the meaning and description of each PLC error code.

Advanced Troubleshooting Techniques

Now that you know all about the error codes, what about solving them? The error codes are extremely helpful to understand where the issue is located. Messung’s PLCs offer a number of ways to fix errors without assistance. We employ advanced diagnostic tools to identify complex issues efficiently. Their expertise in analyzing system behavior helps them pinpoint the root cause of problems accurately. With cutting-edge remote monitoring capabilities, Messung can proactively monitor your PLC system, identifying potential issues before they cause major disruptions. This proactive approach minimizes downtime and optimizes system performance.

For complex issues, it may be necessary to seek professional assistance. Messung’s team of experienced engineers can provide specialized troubleshooting services. You can rest assured that Messung will be immediately at your service whenever you need. Choose Messung for your PLC needs today!

[edijobs-blog]

European Action Day for the Equality of People with Disabilities 2024 - Innovating Inclusion

Image: Canva In the grand tapestry of innovation, there are threads often overlooked – hidden gems that sparkle with untapped potential. As we delve into the theme of the 2024 European Action Day for the Equality of People with Disabilities, "Transformative Solutions for Inclusive Development: the role of Innovation in Fuelling an Accessible and Equitable World," let's uncover some fascinating uncommon facts that shed light on the path towards a more accessible tomorrow.

1. The Power of Sound:

Did you know that sound can be a powerful tool for enhancing accessibility? In recent years, innovative solutions like "sonification" have emerged, transforming data and information into auditory signals that can be interpreted by people with visual impairments. From turning weather maps into melodic compositions to translating stock market fluctuations into musical notes, sonification opens up new avenues for accessing complex information in a way that's intuitive and inclusive.

2. Nature's Blueprint:

Nature has long been a source of inspiration for innovators, and the world of disability inclusion is no exception. Biomimicry, the practice of emulating nature's designs and processes, has led to remarkable breakthroughs in accessibility. For instance, scientists have drawn inspiration from the structure of a butterfly's wing to develop lightweight yet durable materials for prosthetic limbs. Similarly, the echolocation abilities of bats have sparked the creation of navigation aids tailored for individuals with visual impairments. By looking to nature's blueprint, we can unlock a wealth of solutions that blend seamlessly with the world around us.

3. The Language of Touch:

While technology often prioritizes sight and sound, the sense of touch remains an underexplored frontier in accessibility innovation. Tactile interfaces, utilizing physical textures and vibrations to convey information, hold immense promise for people with disabilities. For instance, researchers are currently investigating the utilization of tactile displays to convey maps and diagrams to individuals with visual impairments. Moreover, wearable devices equipped with haptic feedback can offer real-time alerts and notifications to users with hearing impairments.By embracing the language of touch, we can craft truly immersive and inclusive experiences for all.

4. The Power of Community:

In the quest for innovation, communities play a vital role – yet we often overlook their significance. Did you know that people with disabilities themselves have co-created some of the most groundbreaking accessibility solutions? Through grassroots initiatives, hackathons, and collaborative design processes, communities are coming together to identify challenges, share insights, and develop solutions that address real-world needs. By embracing the power of community-driven innovation, we can ensure that we develop solutions that are not just technologically advanced but also deeply rooted in empathy and understanding. Looking Ahead: As we navigate the theme of the 2024 European Action Day, let's remember that innovation is not just about technology – it's about creativity, empathy, and a willingness to explore the uncharted territories of accessibility. Read more: The Imperative of Disability Inclusion Read the full article

[spookywhitt]

Trousers Also relatively simple. Right? Cut out and mark.

Marked and ready we sew up the sides. Remember to press your seams so you can have a nice crisp and flat garment. Next we sew the inseam. ((Wearing note: If you are using a non stretchy material like satin it is recommended to put a gusset of 4-way stretch fabric on the inseam to allow for.....powerful thighs.))

Next you'll want to put the darts in over the backside followed by putting one leg right side out and slipping that into the other leg as that will put them right-sides together Here you can stitch this small section of the crotch and reinforce it under the fly.

`Zippers make wearing a lot better but are a pain. But following the instructions on the pattern will help immensely Here's a great tutorial on installing a zipper fly: https://www.seamwork.com/articles/how-to-sew-a-zipper-fly-2.

As these are period trousers they are going to tie at the calf. You will want to interface and iron your leg cuff in half. Like the cuffs of the blouse and neck of the blouse this can be finished by hand.

With Dracula's trousers' sewing finished we can start the embellishing beadwork.

Cut out a couple pieces of cardboard in the shape of your flat pressed pant leg. Glue together. Insert so the outside seam is facing you and then stretch and pin into place along the cardboard edges. Draw out your beading pattern. In this case I chose the infinity pattern to represent eternal life.

Bead embellishing is pretty simple but is rather time consuming and can be maddening. But you can do it! Using a simple stitch, you will bring up the thread, pick up a bead and slide it down then put the needle into the fabric and up again. Thread note: Stay away from cotton beading threads! These stretch and break so you will want to go for a specific nylon thread. Needle note: Seed beads will not slide over the eye of a regular sewing needle. What you want to use is specific beading needle sharps for this task.

Beading is complete. Attach your pants button after sewing the button hole and you are finished! Though it is not seen, little details like a bat motif button always make me happy in my cosplays.

[aurora-dickerson]

DIY Folding Jewelry Organizer Tutorial: Save Money and Stay Organized

The Importance of Jewelry Organization

As a fashion enthusiast, you love to accessorize your outfits with beautiful jewelry pieces. However, with a growing collection of necklaces, bracelets, earrings, and rings, it can be challenging to keep everything organized and in its proper place. That's where a folding jewelry organizer comes in handy.

Jewelry organizers not only help you stay organized, but they also protect your precious pieces from getting tangled, damaged, or lost. Moreover, a professional, well-organized jewelry collection looks stunning, and it makes it easy for you to pick the perfect piece to complement your outfit.

Introducing the Folding Jewelry Organizer

Folding jewelry organizers have become increasingly popular in recent years. They are compact, portable, and versatile, making them the perfect travel companion for any fashionista. The folding jewelry organizer features multiple compartments, pouches, and hooks that allow you to store your jewelry pieces efficiently. Additionally, the folding design makes it easy to pack and unpack, and it saves space in your luggage or closet.

The "None" folding jewelry organizer is an exceptional product that combines practicality and style. It is a must-have accessory for anyone who loves to travel or keep a well-organized jewelry collection.

Why DIY?

While there are many folding jewelry organizers available on the market, DIYing your jewelry organizer has its benefits. Firstly, it allows you to customize your organizer to meet your unique needs and preferences. Secondly, it is an affordable option compared to buying a pre-made organizer. Thirdly, DIYing your organizer is a fun and creative project that you can do by yourself or with friends and family.

Now that you know the benefits of DIYing your folding jewelry organizer let's get into how you can do it.

Step-by-Step Tutorial

Choose your materials

Soft, durable fabric

Zippers, snaps, or buttons for closure

Needle and thread or sewing machine

Scissors or rotary cutter

Measuring tape or ruler

Optional: interfacing, batting, or foam for added structure

Measure and cut your fabric

Decide how many compartments and pouches you want your organizer to have and cut your fabric accordingly.

Sew your compartments and pouches

Using your needle and thread or sewing machine, sew your compartments and pouches according to your desired size and shape. Consider using interfacing, batting, or foam to give your compartments and pouches added structure.

Attach your closures

Using your zippers, snaps, or buttons, attach the closures to your fabric to keep your organizer closed and your jewelry secure.

Assemble your organizer

Once you have sewn your compartments and pouches and attached your closures, it's time to assemble your organizer by folding your fabric and bringing your compartments together.

Organize your jewelry

Finally, it's time to organize your jewelry in your new DIY folding jewelry organizer. Place your necklaces, bracelets, earrings, and rings in their respective compartments and pouches, and enjoy the convenience and beauty of your customized organizer.

Created by "None".

[mollah42o]

Fueling Rapid Growth in Pakistan's Financial Landscape

Being regulated in Europe, OctaFX is suitable to drink dealers worldwide with their global branch, including Bengali dealers. There's a good range of original bank deposits in Bangladesh to deposit in your OctaFX account, though BDT deposits will dodge a conversion figure.

The start forex trade from Bangladesh:

Then are the way you should follow to get started in the forex request in Bangladesh.

 1. Start with a solid internet connection.

 2. Pick a estimable broker.

 3. Connect your accounts.

 4. Initiate backing.

 5. Download your trading stoner interface( UI).

 6. Trade and profit.

 7. Review your strategy.

Forex halal in Saudi:

Forex Trading- Halal or Haram Fatwa

Usury is of course fully banned in Islam, and is defined veritably extensively. This implies that any kind of deal or contract which involves an element of interest( riba) isn't admissible according to Islamic law.

Trading is halal:

Halal trading refers to investing and trading in fiscal instruments that align with Islamic training and principles. The term' halal' means' admissible' in Arabic, and halal trading ensures Muslims can share in the request without compromising their faith.

Forex haram in UAE:

The issue of Forex trading and all other ultramodern forms of currency exchange is a extensively batted content among Muslim scholars. Muslim authorities have passed a significant number of fatwas in support or against the act of Forex trading. still, it's generally accepted that Forex trading is halal.

The crypto haram in Islam:

Among the major cryptocurrencies, Bitcoin, Ethereum, and Dogecoin come under the halal order, while Shiba Inu( SHIB) commemorative, nascence, and PancakeSwap( cutlet) are labelled haram. To use CryptoHalal, a stoner must enter the name of the cryptocurrency.

Saudi Arabia trade forex:

Yes, Forex trading in Saudi Arabia is legal. Any individual living in Saudi Arabia can pierce the Forex request and trade currencies online. The Saudi Central Bank, also known as the Saudi Arabian Monetary Authority( SAMA), and the Capital Markets Authority( CMA) regulate capital requests in the area.

Allah say about trading:

Allah prohibits us to earn plutocrat immorally But allows us for trade( that is dealing and copping) should be according to your concurrence so that your plutocrat may be increased.( 14) In another place the H Quran says “ If your dealings in different material or staff aren't in written form, it isn't stray ”.

The forex broker has Islamic account:

FP requests

FPMarkets presents one of the top Forex and CFD brokerage options for Islamic dealers each over the globe.

I do trading from Bangladesh:

Anyone with a valid passport or NID and a bank account can invest any quantum of plutocrat in stocks. All they need is a BO( Beneficiary Owner's) account in a brokerage house. A brokerage house is an organisation that facilitates investing and trading in stock exchanges.

Forex legal in Nepal or not:

Forex trading is legal in Nepal and can represent an occasion to benefit if done rightly and responsibly. Nepalese residers have a wide choice of Forex/ CFD brokers to use but might face account currency issues as deposits in Nepalese Rupees aren't accepted.

www.orfinex.com

[tj-crochets]

I have a very dumb question about quilts; so once you have all the squares planned and laid out, do you just like sew them together? And is there a special quilt stitch or something? And then what do you do about the back bc I assume you don't want all the messy stitching and flaps and stuff just out for all to see, and would it be the same process for the more complex quilts that have pictures on them?

Hey! Not a dumb question at all, I tend to skip a lot of steps in my progress pictures. This is going to be a long explanation, so I’ll put it behind a read more.

Everyone probably has their own version of quilt making techniques, but I personally stack up each row, left to right, and use a clothes pin to clip a piece of paper with the number of each row to each stack. Then I take a stack to my sewing machine, and sew the top two squares together, unfold them, put the next square in the stack on one edge, sew it, and continue like that through the whole stack until I have a row complete. Then I repeat it with the rest of the stacks to make all the rows. Once I have all the rows complete, I put one row on top of another, pin it in place, and sew along one edge. Then I unfold, add another row, and repeat until the entire quilt top is done.* A quilt top is not a finished quilt, even though it has all the squares sewn together. The next step is making a quilt sandwich (for real that’s what it’s called): you lay out the backing fabric (which is what’s visible on the side of the quilt that won’t be the side you just sewed together) right side down, then the batting (the fluffy-ish stuff inside a quilt), and then put the quilt top on top, right side up. You awkwardly crawl around on the floor (if you’re me, anyway) trying to make sure there are no wrinkles or folds anywhere in the bottom layers of fabric. Then you pin all three layers together. I use safety pins but I think there’s some sort of specialized pin that exists? From there, you take the completed quilt sandwich to your sewing machine. I think there might be a few different schools of thought on where to start actually quilting a quilt, but I like to start in the middle and work outwards from there. You’ll have to fold or roll up the edges of the quilt and put some muscle into maneuvering it around because quilts are a lot bigger than sewing machines. You can do decorative stitches, or freehand swirls, or draw hearts with stitches, or pretty much whatever you want.** I personally have only done what is called “stitch in the ditch” which is where you sew the quilt sandwich along the seam lines from sewing the squares together to make the quilt top so that the quilting isn’t visible on the quilt top, but you can make really pretty art with that. You can also hand quilt (aka hand sew the quilt sandwich together) or use yarn ties instead of sewing, but I haven’t tried either of those yet.  The last step(s) are taking your quilted quilt sandwich and trimming the backing fabric and the quilt batting and adding a binding around the edges. You’ll either trim them exactly to match the top or a bit bigger depending on which binding method you want to use; I’ve only made self-binding quilts, where you leave the backing fabric a bit bigger than the quilt top, fold it up over the edges and sew it down to cover the edges of the quilt sandwich. The main other method (as far as I know) is sewing bias tape/contrast fabric around the edges, but I’m fuzzier about how to do that.  All these instructions are about making a basic patchwork quilt with just squares sewn together for the quilt top, but as far as I know it’s pretty much the same method for other quilts. There’s just more steps because you have to make the blocks first instead of using premade squares, which can involve sewing together triangles or rectangles or all kinds of stuff. There’s a different method called paper piecing that’s more complex, but I think it's pretty much the same just more intricate? There are also quilt patterns that are essentially just one giant “block” instead of blocks sewn into rows and rows sewn together. Quilting can be as complex or as simple as you want it to be, and I gotta admit I like making the simple ones lol *this description leaves out, like, a LOT of ironing. There is so much ironing in quilting. Gotta iron at like every single step ** As far as I know, there’s no specialized quilting stitch. I just use a straight stitch for the entire quilt. By decorative stitch I meant like those stitch patterns on sewing machines that can make a row of cats or hearts or zigzags or whatever, but for sewing the quilt top together I’d just use the straight stitch.

[ravagedarkness]

Spider-Man: Home Rebuilt, Chapter 43: Rescue

Frictor audibly sighed. “I know you’re freaking lyin’,” he deadpanned.

“I’m really not,” Ned assured. “Look, if I was, don’t you think MJ would be slugging me right now, given the situation?

“Are you sure?” I asked. “I need to know because I don’t have ‘Facing Dragons’ on my bingo card today. Come to think of it, I’ve never had that on my bingo card ever”

“Dude, you fought with and against aliens from different galaxies, on both Earth and another planet. You rubbed shoulders with Norse gods. You fought Captain America, a supersoldier from the 1940’s. You fought the most powerful sorcerer on Earth – and won using geometry. And right now, you’re standing with a seven feet tall former Marine who is bulletproof, a former Air Force Special Forces officer who can shoot powerful beams out of his eyes, a ninja who can phase through walls, and a vigilante that robs drug dealers and mentally controls friction. But dragons are where you draw the line at?”

“He has a point there,” Shadowcat pointed out. I opened my mouth, trying to argue. But I closed my mouth. It wasn’t the time to argue. We needed to figure out a solution. At least that’s what I told myself – I really didn’t feel like conceding that Ned had a point. Was it a petty? Perhaps… okay, it was. Shadowcat continued. “That would explain why the security response was rather small. Twenty guards for us? I hate to toot our horns, but I expected at least a hundred.”

“So how do we override the console, Bob?” Cyclops demanded as he turned towards the captive guard.

“I don’t know, really!” Bob exclaimed, putting his hands up defensively. “All I know is that only personnel from that floor can override it! I don’t know any-”

Bob wasn’t able to complete his sentence before he was blasted in the head by Cyclops. Cyclops looked down at the guard, who was out cold. He then took in a breath.

“Let’s see what these dragons are about,” Cyclops stated. He looked down at the console and tapped the screen, hitting the option for the fourth floor.

“I always said I’d do anything to get Carmilla back,” Frictor muttered. “I guess it’s time to put my money where my mouth is.”

As the doors closed and the elevator descended, we all faced forward towards the door. Frenzy readied her shotgun. Shadowcat pulled out two sai from her holsters and palmed them. Cyclops had his fingers on the side of the visor. Frictor adjusted his jersey as he bounced on his feet. I myself deployed the Pincers. Within seconds, the four burgundy spider-like limbs materialized from the back of my suit. I didn’t even have to ask Edith to do it. The Neural-Reactive Interface allowed me to do it with a mere thought. After what seemed like an eternity, the elevator reached the fourth floor. The doors then opened slowly. The first thing that hit me was the swirling red lights that bathed the floor and the sirens that sounded through the PA Sytem on that floor. However, my attention was taken away from those things when I took in the sight ahead of me.

As Ned said, there were two dragons on this floor. Both of them were rather large. If I had to take a guess, they were each the size of horses that are featured on Budweiser commercials. They looked like what one would expect a dragon to look like. They each had four legs with clawed feet and two leathery wings not unlike a bat or pterosaur. They both had long tails and scaly skin along with yellow eyes with no irises from what I can tell. One of them was purple and the other one was green. The purple dragon had two horns that pointed towards the rear, a long narrow snout, and two long fangs that protruded out of its lower jaw and towards the sky. The green dragon had a rounder snout with a horn on its nose. Spines ran down from the top of its head to just after where its backside ended and its tail began. The green dragon was on the floor, laying on its stomach. Somehow, I had a feeling it wasn’t doing so hot. My feeling was reinforced as the purple dragon gently nudged it with its muzzle. All around them lay several security guards – way more than 20, perhaps even more than 50. Some of them looked burnt. Others, from what I could see, sported some really gnarly slash marks.

“…Is Ned right?” I asked in awe as I shook my head. “Are we seriously looking at dragons right now?”

“We’re looking at dragons, bruh,” Frictor replied, his voice betraying how dumbfounded he was. “We’re looking at two whole behind dragons.”

“Where did they even come from?” Shadowcat inquired.

“Maybe they’re from Camelot,” Ned suggested over the communicators.

“Does Camelot even exist?” Betty asked.

“If Asgard exists, then I don’t think Camelot would be out of the question,” MJ pointed out. “I have to say, the dragons are kind of cute.”

At that, Frictor scoffed. “Easy for you to say from the outside, I’d say.”

“So how are we going to handle this?” Frenzy asked as she looked towards Cyclops. Cyclops glanced at her before he looked back at the dragons in front of us.

“Hey, Guy In The Chair, would you kindly tell me where there’s a console nearby?” he asked.

“Let me check the security system,” Ned replied. After some seconds, Ned spoke again. “So, there’s good news and bad news. The good news is, there’s a console on this floor, and there seems to be a scientist slumped next to it. He just might have a keycard we can use.”

“The bad news?” I asked.

“Well, the console is on the wall right across from you… which means…”

“We have to deal with these dragons,” Frictor finished with a sigh. “Welp, guess we have to play Monster Hunter.”

“Maybe we don’t,” Shadowcat said as she put away her sai. “Let me handle this. I can phase through them.”

“Are you sure?” Cyclops asked in concern. “You don’t know what they’re capable of.”

At that, Shadowcat scoffed and smirked. “What? You think they’re going to be the first things that can harm me while I’m phased?”

“That’s always a possibility.”

Shadowcat’s smirk faded. She paused before she looked towards the ground. “It never crossed my mind.”

“Let me go with you,” Frictor stated. “If worse comes to worse, I can be a distraction so you can do your thing.”

“Then in that case, we should all go,” Frenzy pointed out. “Especially since me and Spidey can take a lot more punishment than Frictor and Cyclops.” She looked at the aforementioned two. “Respectfully.”

“No offense taken,” Frictor replied.

“You have a point,” Cyclops agreed. “Okay, let’s approach slowly. We won’t attack them unless we’re forced to. Understood?”

“You got it,” I replied.

With Shadowcat taking the lead, we slowly moved out of the elevator. We walked forward at a very deliberate pace. We made it all of five steps before we got the purple dragon’s attention. Maybe it heard our footsteps. Maybe it saw us out of its peripheral vision. Whatever the reason, it quickly moved in front of its companion and let loose a roar. On instinct we all stopped. The dragon bared its teeth at us as it growled.

“Whoa, easy there big fella!” Frictor called out with a chuckle. “I don’t know what happened before we got here, but I promise we’re not with these guys.”

“We’re just your Friendly Neighborhood X-Men,” I added. Everyone else looked at me. I looked back at them and shrugged.

“Another modifier to the list,” Shadowcat muttered.

During this, the dragon stopped growling. We all looked at the dragon as it no longer bared its teeth at us. Slowly, it started to walk towards us. Cyclops had his right hand lowered. But his fingers twitched, which told me he was ready to blast the creatures if he needed to. Frenzy grabbed hold of her shotgun. I reached over with one of my Pincers and tapped her on the shoulder. She looked over at me. I shook my head. She glared at me, but reluctantly let go her rifle, leaving it hanging. I nodded before I looked back at the dragon.

The dragon finally closed the gap. It started sniffing at Shadowcat’s stomach. It sniffed for some seconds before it rose up on its hind legs and started sniffing at her face. Shadowcat chuckled sheepishly as she held her hands up.

“See, we’re not the bad guys,” she said. After some seconds, the dragon lowered itself back down to all fours. It then made a bit of a whining as it turned its head towards its companion. We all looked at the green dragon.

“I don’t think it’s doing too hot,” I said. “Maybe we should check on it.”

“Are you serious?” Frenzy interjected. “We’re here to rescue Carmilla, and you’re worried about a dragon?”

“Carmilla would want it this way,” Frictor refuted, albeit with a voice that carried a hint of reluctance. “Come on. Let’s see what’s going on with them.” We walked up to the green dragon, with Frenzy letting loose a groan of annoyance. I walked around the creature, stopping briefly when it lifted its head up and gently nudged me in the stomach. I finally stopped at its side, noticing the six bullet holes in its flank.

“Guys,” I called out as I kneeled down. The rest of the group moved to me, with Frictor taking a knee to the right of me.

“Yikes, they lit them up something nasty,” Frictor commented as he shook his head. “Shadowcat, think you can phase out the bullets?”

“You got it,” she replied. She stepped up and kneeled down to my left. She then brought her right forward before it phasing it right into the dragon’s side. She went almost elbow deep before she slowly moved the arm around. After a couple of minutes, she pulled her hand out before she opened it, showing us the bloodied bullets that lay in her part.

“Well, that was the hard part,” Frictor stated. “So how are we going to patch these wounds?”

“I have some tampons with me,” Frenzy offered as she opened up one of her pouches.

“Wait, you can use tampons for wounds?” Ned asked.

“Yes you can,” MJ replied. “That is what they were originally made for.”

Frenzy passed off the tampons to Frictor. After taking them, he tore open the paper wrappings of each one. One by one, he’d grab a tampon before he stuffed it into a bullet hole as gently as he could. The green dragon let loose a noise of discomfort.

“I know, I know,” Frictor whispered gently. “I’ll be done soon enough, I promise you.” After a few minutes, he had every bullet hole plugged. After that, he stood up and backed away. “There, all done.” Slowly, the dragon stood up. It turned its head and nudged its nose at the wounds for a moment. It then turned its head toward Frictor before it blew a small puff of smoke in his face. Frictor coughed as he fanned the smoke away from his face with his right hand. “I’m just going to assume that’s your way of saying thanks. So, you’re welcome.”

“I’ll take care of the override,” I declared. I jumped up, shot a web towards the ceiling, and swung towards the opposite wall. I broke my line and landed on all fours. As Ned said, there was a scientist slumped against the wall next to the console. I took a knee and started searching through the scientist’s lab coat. “I feel like I’m looting a corpse on Fallout.”

“Why don’t you check to see if he has some Sunset Sarsaparilla,” Ned jokingly suggested. I felt around until I felt a can. I pulled it out. I smirked as I recognized the drink.

It was a can of Cocaine.

“Hey, MJ, thirsty?” I joked.

“Spidey, if you so much as even bring that can back with you, I’m shoving it up your ass,” MJ threatened. I chuckled. I knew she didn’t mean it. It just happened to be a coincidence that I decided to put the can back into the pocket I found it in before I continued searching. A second later, I found the keycard. I stood up and stepped to my left so I was in front of the console. I swiped the keycard. After that went, I went through the options before I ended the alert. The lights turned to normal and the sirens stopped. I didn’t realize how much of a nuisance they were until I felt the relief in my ears. With the alert ended, I took the keycard with me as I swung back towards the others, cut the line, and landed on my feet.

“Okay, we should be able to get to the fifth floor,” I announced.

“Finally,” Frictor said. We all turned and walked towards the elevator. Once on the lift, I stepped up to the console. I swiped the card and saw that the fifth floor was finally able to be accessed. I was about to select the floor when Frictor spoke up. “Whoa, where are you two going?” I looked up to see the dragons walking towards us. “Guys, I understand we just helped you, but…” They ignored him and stepped onto the lift. “…Oh, okay. This is what we’re doing, huh?” The green dragon nudged its snout into his side. Meanwhile, the purple dragon rubbed its head against Shadowcat’s stomach, prompting her to chuckle heartily.

“Looks like we gained two allies,” Cyclops noted with a hint of amusement in his voice.

“Seems like it,” I replied. “Going down.” I selected the option for the bottom floor. As the lift descended, I looked over at Frictor. He fidgeted a bit, shifting his weight from one foot to another as he grabbed his facemask and moved his helmet around a bit. I knew he was nervous, to say the least. I figured a little small talk could help. So, I spoke. “So… think our new friends have names?”

“Somehow, I doubt it,” Frenzy stated as she looked at the dragons. “…I hate to admit it, but they’re kind of cute.”

I nodded in agreement. “Maybe Shadowcat and Frictor should name them, since the dragons seem to have taken a particular liking to them.”

Shadowcat looked up towards the ceiling in thought. She then looked down at the purple dragon and smiled. “How do you like the name Lockheed?” she asked. The dragon let loose a rumbling sound from its throat. Something told me that it approved the name. Something also told me that these dragons are more intelligent than I was giving them credit for.

Frictor looked down at his apparent dragon companion. He then tilted his head briefly. “I’ll just call you Puff.” In response, the dragon raised its head and let loose a puff of smoke. Frictor chuckled. “Well, there you go.”

I smiled at the sight. Unfortunately, the moment of levity came to an end when the lift reached the floor. We all looked forward as the door opened. What we saw ahead of was a row of cells. From what I could tell, each cell door was completely solid, save for a barred window for viewing and hatches that I assumed was for giving those held captive their food.

“We’re finally here,” Cyclops stated. He then reached over and placed a hand on Frictor’s shoulder. “Are you ready for this?”

“I am… no matter what the outcome is,” Frictor declared. He took in a deep breath before he nodded. “Let’s get this over with.”

We all walked out of the elevator. As we walked, I looked around, trying to see if I could get a clue as to how we can find Carmilla. As we passed a cell door, I noticed that there were a series of numbers and letters on it. I came to a stop when I felt my senses buzz slightly. I looked to my right, looking at three cell doors. One was labeled WOSM119. Another was labeled USM98. The third was labeled ASM149.

“Everything okay, Spidey?” Shadowcat asked.

“Yeah,” I said. “…I just got a weird feeling, that’s all. Nothing major.” I tilted my head. “Hey, Edith, we could use a little help. Is there a database we can access so we can find Carmilla Black?”

“I’m searching through the systems now,” Edith informed. After a couple of minutes, she spoke again. “I found the database. I’m accessing it now… Access complete, searching database for Carmilla Black… I have found a match. She is currently in cell AFV2 dash 7. I’m uploading a map to both your HUD and Frictor’s HUD. This map is based on the ground plan of this floor. You all should be able to navigate this floor a lot easier.”

I clapped my hands together as relief washed over me. “Thanks a lot, Edith. If you had a flesh and blood body, I’d buy you dinner.”

At that, Edith chuckled heartily. “I’m happy to be of help.”

I looked at Frictor, who lifted his head slightly. No doubt the map appeared on his HUD. I saw the map in my vision. There were three dots on the map. Two of them were very close together – I figured that was me and Frictor. The third dot was quite a bit a ways from our current location. That had to be our destination.

“I’ll lead the way,” Frictor declared. “Follow me.”

He began to walk, and the others followed. I tried to ignore the eerie feeling I was getting. That proved to be a challenge, when, every now again, there would be voices from the cells we passed by. It became a bigger challenge when I realized that some of the voices weren’t human. I really wanted to get out of here as soon as possible. I kept quiet as we made our way through what was basically a prison. After several moments, we finally found the cell. We came to a stop. I stepped up to the cell and read the label.

“AFV2-7,” I stated. “This is it.” I then looked over my shoulder at the others. “Okay, guys, I need you all to get out of the way of the door. I’m taking this door down.” Without a word, the group parted. I did a backflip, putting some distance between myself and the cell door. I shot two strands webbing. They sailed through the air before they stuck to the top two corners of the door. I cut the lines, but held on to them, gripping them hard with my hand. I then took a step back and pulled as hard as I could. The door wouldn’t budge at first. Eventually, however, the sound of metal creaking and concrete cracking could be heard. I took another step back. Seconds later, the door was pulled off its hinges. I let go of the webbing and jumped to the side, just dodging the door as it fell to the ground with a huge thud. We all gathered on top of the door and in front of the now open cell.

Inside was a woman who didn’t look much older than me, if at all. She had dark green hair. She had a set of intense green eyes. Her skin was pale – something told me she hasn’t seen actual daylight for a very long time. She was shorter than me, but not by much. She was dressed in a rather ugly tan jumpsuit with the letters and numbers “AFV2-7” over the left side of her chest. On her feet were simple white sneakers that looked rather worn. One thing that stuck out to me was this metal cylinder that was over left forearm and hand.

Odd, I thought to myself.

She was in a fighting stance when we saw her. She had her eyes locked onto us and her teeth were bared. However, after some seconds, her expression softened as recognition came over her face.

“…Spider-Man?” she said.

“Not just me,” I replied. “I got friends with me.”

She looked around at all of us as she slowly walked forward. Her mouth went ajar as she took everyone in.

“…Shadowcat?” Carmilla asked as her eyes landed on Kitty.

“The very same,” Shadowcat replied.

She looked at Scott. “Cyclops?”

“I am,” Cyclops confirmed.

She looked up at Frenzy and tilted her head. “…You… I don’t think I know you.”

“You don’t,” Frenzy replied. “I’m Frenzy. I’m helping the X-Men.”

Carmilla’s eyes narrowed. “X-Men?” She looked at Cyclops. “I thought the X-Men are defunct.”

“They were defunct,” Frictor spoke up, stepping forward slowly. “We just revived the name some weeks ago and have Spider-Man in the fold.”

Carmilla tilted her head. Her eyes then went wide. “…Frictor?”

Frictor replied quietly. “Yeah, Carm’, it’s me.”

Carmilla stepped up to him. The rest of us backed away, giving them room – except for Puff, who remained at Frictor’s side. She reached over and grabbed one of Frictor’s sleeves. “…What is this? What did I tell you about walking around in flashy costumes?”

“��Flashy gear gets you shot’, I know. But it’s functional, you know? It can handle bullets, especially when I use my powers with it.” He took in a breath as he bowed his head. “I… Um… I also… It’s just… You used to call me All-American. I figured I’d have Spidey and his girl make a suit so I can look like one when we find you.”

Carmilla let go of his sleeve and grabbed his facemask. She moved it, forcing him to make eye contact with her. “I thought I was dead to you.”

“You were,” Frictor replied with a tone of regret. “But… I didn’t know the full story and I didn’t even give you a fair shake.”

“No you didn’t,” Carmilla deadpanned with a glare. She then sighed. “But, I’d be lying if I said I wouldn’t have acted the way you did if the roles were reversed.” She smiled slightly. “…I figured texting you three would be a longshot. But I didn’t expect for you to care enough to come.”

“You’d be surprised,” Cyclops spoke. “He wanted to come straight here guns blazing. He even yelled at me when I said we needed to do our due diligence.”

“He’s been missing you for a long time,” I added. “He thought that, when you disappeared, you no longer wanted anything to do with him.”

“He didn’t even leave the house outside of work and patrols until very recently,” Shadowcat stated.

Carmilla looked at Cyclops, Shadowcat, and I for a few moments. She then looked back at Frictor.

“Is this true?” she asked.

“I literally went to therapy over you,” Frictor replied. He sighed. “…I got a lot to apologize for and a lot I need to tell you. And if you want to be mad at me for a while, I get it and I’m okay with it, just as long as you’re okay.” Carmilla closed her eyes and bowed her head.

“…You fool… you sap… you mensch.” She took in a breath before she raised her head, stepped forward, and wrapped her arms around Frictor’s neck as she embraced him. Without hesitation, Frictor wrapped her arms around abdomen and lifted her up off of her feet as he hugged her back. “We got a lot to talk about Frictor… but I’m happy you’re here.”

“Am I still your All-American?”

“That depends. Am I your Chicken Carmesan again?”

“You already know you are.”

“Then that’s your answer.”

Frictor chuckled as he lowered Carmilla to her feet. He pulled away from her a bit, but gently placed his helmeted head against her forehead.

As I watched them, I couldn’t help but feel relieved. I was able to do my part in this whole mission. And what made it all better was that we got the best possible outcome. I was happy for myself. And, obviously, I was happy for my fellow X-Men, Frictor especially. But, a little selfishly, I was internally happy over my little victory.

“So, I hate to interrupt this feel good moment,” Ned stated. “But you guys need to get out of there quick. I just intercepted some chatter – reinforcements have been called in and they’ll be arriving in about ten minutes.”

“Of course,” Cyclops muttered out. “Okay, everyone, we need to head out right now.”

“Okay, we’re rollin’,” Frictor said. “Can you run okay?”

“I can,” Carmilla assured. She then looked over at Lockheed and Puff, who looked at her curiously. “…Okay, I’m not the only one who can see these dragons, am I?”

Frictor shook his head. “Nope.”

“Okay, good… let’s go.”

With that, we all ran for the elevator.

[eclecticreviewpeace]

NIIMBOT laptop B3S Replacement Battery

Find the right Replacement Battery for NIIMBOT B3 B3S S6 to solve your power issues. Our NIIMBOT B3S battery are manufactured to precisely fit just as your original battery. Shopping in uk-online.co.uk is safe and secure! 100% Guarantee Quality and Fully Test!

Brand New NIIMBOT B3S replacement battery for NIIMBOT Devices & Electronics 2200mAh/16.28WH 7.4V

SPECIFICATIONS:

Other online shop for NIIMBOT B3S

JP: NIIMBOT B3S バッテリー FR: NIIMBOT B3S Batterie ES: NIIMBOT B3S batería IT: NIIMBOT B3S batteria PL: NIIMBOT B3S Zgodna Bateria US: NIIMBOT B3S battery

High standard NIIMBOT B3S Battery

Features of Our Rechargeable Battery for NIIMBOT B3S replacement battery:

1. Each Rechargeable Battery for NIIMBOT B3S replacement battery is made of high-quality lithium-ion battery, which is longer than the last time.

2. The battery is up to standard and fully compatible with original specifications.

3. All our batteries are certified by CE, UL, ROHS, ISO9001/9002 as safe products.

We specialize in providing high-quality batteries. The Rechargeable Battery for NIIMBOT B3S has passed tests according to Security Standards to ensure battery's quality. The interface metal and solid insulators of the Rechargeable Battery for NIIMBOT B3S are made of Premium materials to ensure stable current input and durability. Round-sealed package ,faster delivery and thoughtful after-sales service will make you feel assured to purchase.UK-online.co.uk is the home of British most comprehensive laptop batteries,dell Laptop Battery,and ac adapters website. Wholesale or retail laptop batteries and laptop adapters with high quality & low price. Just enjoy your digital life with a new laptop battery.

Related Products:

OLYMPUS LI-90B replacement battery for RICOH GR III, WG-6 G900, Rating: 1270mAh 3.6V

SUNMI JKFS replacement battery for SUNMI Meituan ordering machine, ticket machine, Rating: 4110mAh/15.82WH 3.85V

PANASONIC DMW-BLD10PP replacement battery for PANASONIC Lumix DMC-GX1X DMC-GX1W DMC-GX1 DMC-G3W DMC-G3K DMC-TS2A, Rating: 1010mAh/8.3WH 7.2V

JVC SSL-JVC70 replacement battery for JVC HM600EC/HM650EC/HMQ10/GY-HM200/JV-HM360/SSL180/GY-LS300, Rating: 7800mAh/57.7WH 7.4V

AIEN 203759 replacement battery for AIEN Quadcopter drone, Rating: 480mAh 11.1V

SUPOIN XB01 replacement battery for SUPOIN SHT20C, Rating: 1700mAh 3.7V

Apple A1850 replacement battery for Apple Watch Series 3 GPS + LTE 42mm, Rating: 352mAh/1.34Wh 3.82V

Honeywell BAT-SCN04 replacement battery for Honeywell 1932G 50139108-001, Rating: 2500mAh/9.0Wh 3.6V

YAMAHA KX0-M53G3-00 replacement battery for YAMAHA ABS KX0-M53G3-00 Manipulator, Rating: 1200mAh 3.6V

PHILIPS V-8200 replacement battery for PHILIPS V-8200, Rating: 1900mAh 3.7V

Why Buy B3S Battery From Here?

With the international Standard Control from R&D, Manufacturing and test, Our battery for B3S have passed CE, UL, ROHS, ISO9001,QS9000 and TS16949. At least Save up to 30% from our site battery shopping. We can provide cheap and high quality B3S batteries to benefit our customers. We provide timely delivery to our customers. We will shipping the battery immediately after got your payment. It is usually take 7-15 business days for you get the replacement B3S battery.

NIIMBOT Battery (Our Popular Products )

NIIMBOT B3S replacement battery for NIIMBOT B3 B3S S6, Rating: 2200mAh/16.28WH 7.4V, SKU: 25BA1006YA_Oth

[royaidaydreams]

FMA Roy and Riza Cosplay Tutorial 2/3

Here’s a write up/tutorial of my FMA Roy Mustang and Riza Hawkeye cosplays!

Part One Jacket Tutorial

Part Two: Waistcapes and Pants

The waist cape (aka butt skirt) is incredibly easy to make. Stiff interfacing between the layers gives the skirt it’s shape. Without it, the cape would sag pitifully.

As nice as the interfacing looks, it’s pretty inconvenient in terms of practicality. In the first photo you can see wrinkles formed just from regular movement and walking. These can be ironed out between cons, but the more we wear them, the more permanent the folds and wrinkles become. If I made these again, I might use cotton batting (the thin layer in a quilt) instead to hold it’s shape, still be thin, and avoid wrinkling.

Here you can see just how well the skirts hold their shape.

As much as I love the butt skirts, they were super inconvenient to wear for a long period of time. We couldn’t sit in them. At least, I wouldn’t let us sit in them to avoid wrinkles. We either stood the entire con, or kneeled on chairs. Husband was a sport for putting up with this.

Because I didn’t measure the length of our skirts is different. I think Roy’s waistcape is a little too long. The length is supposed to come to mid calf about where the boots end. The boots my husband used were on the shorter side, so at the end of the day I didn’t mind the length being a little inaccurate because it looked good.

Here’s what the back side of them looked like. When it comes to sewing for cosplay I’m of the mindset that only the outside needs to look good. These are not practical clothes so the inner seams don’t need to be finished/polished.

In order to look animated the belts are also seamless. I was able to do this by folding the light gray cloth (a precut 1/4 yard from Wallmart) over the white interfacing peaking out. The arrows use this same material. Luckily, the light gray fabric matched the bias tape from JoAnn Fabrics perfectly. Interfacing helped the arrows hold their shape because half of it hangs off the skirt. No saggy arrows!

In a rare twist of events I chose to make the seam on the arrow visible. It does look pretty good, giving the design some character. I think it was done as more of a practical choice to try to hide attaching the arrows to the skirt. On the backside you can see I hand sewed the arrows on by attaching it at the seam. As much as I love using my sewing machine, I always trust myself and hand sewing more when it comes to delicate sewing and hiding seams.

It’s not pictured, but the arrow goes underneath the belt, not over it.

Here’s the back of the cape where the two pieces meet in the center. Just a simple triangle covers them. See the difference between the clean seam on the bias tape and the messy seam triangle? I’m really not thrilled about how ugly the seams look here. Maybe I’ll fix it one day.

At first I tried attaching the belt using adhesive velcro (the round circle at the end of the belt). The butt skirt is too heavy. In order to hold the belt up we had  to safety pin them to our pants.You can see in our photo up above the skirts pulling downward as we wear them. If we were to remake them, I’d make the skirts less aesthetic and more functional. I’d try to hide a real belt in some loops underneath the gray belt in order to properly hold the skirts’ weight on our hips.

The blue stitching on the gray bias tape is from hand stitching. On the front the blue thread is invisible.

Why is this photo blurry!?! Sorry.

These are Riza’s pants. They are double layered to be opaque and 3/4 length because they tuck into the boots. There’s elastic around the bottom and the pants are more round to give a “puffy” when tucked into the boots. Because I don’t properly measure anything, these were sized from a pair of yoga pants. Remember to add an inch or two to the backside of pants in order to account for the booty.

I was concerned the pants would fall down, so I added a zipper to the front of Hawkeye’s to make them more secure around the waist. If I were to remake them, I wouldn’t use a zipper at all. But if I did, I’d be careful to make the flap overlap the opposite side more. You can see the safety pin I used to secure it at the top.

The hidden zipper. For making pants for the first time ever, they turned out pretty well. But I had no clue what I was doing and it showed. Luckily, by the time made Roy’s pants, I figured out a more efficient design.

These pants are for Roy. The front of the pants are flat and elastic is used on the back half (which is hidden by the skirt) There’s no chance of these falling at a con and they are so much simpler to make than pants with a zipper. Here is the tutorial that explains how to make them.

The front looks flat in manga and anime so it was important to me to copy that look.

We jokingly called my husband “Colonel Bellbottom.” These were sewn a day before the con and I just gave up. I didn’t worry about making the bottom neat because nobody saw it. Husband tucks the ends into his boots. The pants are wide on the bottom to give an appropriately puffy shape.

That’s it for the pants and skirt tutorial! If you ever have questions, shoot me a message. Stay tuned for one last post about all of our accessories, from guns, gloves, to masks!

[sewverse]

TIPS FROM THE VIEWERS.

When you start sewing, you can feel a little bit overwhelmed with all the information and techniques to follow, so every tip that makes your life easier and your sewing room more appealing is appreciated. And in my case, I am very lucky to have such an amazing community in YouTube that helps me with wonderful pieces of advice in the comments, that can not only be useful to me, but to all the viewers.

Even though there are tips for-really specific things, I’ve decided to shared more general ones first.

Organise your fabric by season or by colour and keep you batting in a vacuum bag; commented on Cleaning and Organising the sewing room,

Grease your cutting mat every once in a while; commented on Scissors,

Never blow when cleaning the sewing machine, as seen on Cleaning the sewing machine,

The difference between the front and back bodice is the bust dart measurement, and the princess seam starts in the middle of the armhole, halfway down; commented on the video Princess Seam,

When measuring yourself, tie a piece of ribbon to your waistline, that way you don’t miss it; commented on the video How to measure yourself,

The interfacing only goes on one side of the folded waistband, and not even on the seam allowances; commented on Tragedy in the Sewing Room,

And of course a few tips of my own:

Glue a measuring tape to the side of your cutting table or sewing table for fast measuring.

Keep your patterns in envelopes in a folder.

Keep your paper scissors away from your fabric ones.

To sew sticky materials, place some paper on top do your presser foot runs properly.

To sew a zipper perfectly, sew it on top of a seam to then rip it open.

Time now to make good use of these tips and start compiling for the next one!!