#vertical designer radiators. Horizontal designer radiators | Explore Tumblr Posts and Blogs

glowcircuit · 5 months

Text

I built a miniature Va11 Hall-A Bar inside of my PC!!

Va11 Hall-A PC Parts & Build list

PC:

CPU : Intel I9 14900k

GPU: Intel Arc A770 16gb

Ram: Corsair Dominator 64gb 5600

Mobo: Maxsun Terminator Z790 D5 wifi

Hard drives M.2: Samsung 990 pro 2tb, Samsung 970 evo plus 1tb, CT 1tb, Adata 500gb

PSU: ROG Thor 850 P2

Cables: Cablemod.com custom shortened and sleeved

Water loop distro : EKWB FLT 120 reservoir + D5 pump

Water loop cpu block: ThermalTake Pacific Mx2 Ultra

Water loop radiators: Alphacool HPE 20 x 2

Water loop hardware: 15 Alphacool, 3 EKWB, 2 Alphacool soft, 2 granzon

Water loop tubes: EKWB Acrylic tube 14mm, Alphacool 13/10 soft

Air Cooling : ThermalTake Toughfan 120mm x 3 + Controller

Air Cooling : Noctua 40mm pwm server fan x 2 (non visible)

Additional RGB Control : Coolermaster controller

Case:

Lian Li PC V600, left side mount, released in 2006, I acquired it in 2015 from PC Recycle in sodo Seattle.

I had to track down a new foot, one had been missing since I acquired the case (ebay)

Mods:These are the case mods I did personally

Cut a hole for the cpu mounts in the Motherboard mount plate as this case was designed for older hardware

Cut two 120mm blowholes and added aluminum covers (Dremel)

Cut Front and rear windows into side panels (Dremel Max)

Moved PSU from vertical placement in the lower right side of the case in front of the CPU to horizontal placement in the top left in old drive bays.

The PSU bracket had to be cut to show the OLED on the side.

Modded the side panel rail slide to accommodate the PSU, I used the original aluminum stand the psu was on, cut in half and epoxied with JB weld.

Changed and moved Power/ Reset switch to the back of the case, shortened and spliced the cable

I cut and bent my own 14mm acrylic tubes (hobby miter, heat gun).

Cut and made two way mirror for the front panel

Plastic "truss" is both functional and aesthetic. It came from a Gunpla accessory kit and has two cables passing through it and it acts as the GPU support. I could only get red and had to paint it.

Notice that some logos are missing/ covered, I dislike having a case as an advertisement. The Rog eye on the PSU is mostly covered but iykyk, most of the word "Intel" on the ARC GPU, Two of the Thermaltake logos on the fan edges, the Paint on the Thermaltake Mx2 Ultra and Maxsun terminator heatsink. (I will eventually cover the visible SSD with a heat sink, cover the fan info on the rear and work a cover for the word "dominator"). the one logo explicitly unchanged is the LianLi case badge, if I think of a perfect replacement, maybe then.

Mod I did not do:

I did NOT shorten and sleeve my own cables, I used cable-mod.com. I am not confident in my ability to do this.

BAR:

"Bar Tiny" Re-ment sets from Japan, 17 sets involved.

I customized the color of the bar and chairs and shortened one table for the mezzanine. The whole bar, minus barback- is on a removable 7 inch piece of black acrylic for cleaning.

Jill Stingray Nendoroid

Jils Cat, it sleeps on the GPU

Jill Stool: Jill is glued to a cute doll stool to see over the bar

Jill Accessories non-Nendoroid: cellphone, purse, coat (ebay)

Dorothy Haze Nendoroid

will be added on release.

Bar Back:I made this myself

Black acrylic sheet, and frosted acrylic rods.

Doll Light power kit: 8 Led lights, 4 incandescent lights

USB Doll light power strip

Other Bar Accessories:

Overhead Hanging farmhouse light

trash, mop, broom, pan, mop bucket,

2 blue fuzzy chairs

Miniature plants

Miniature Microphone

Mini bottle Dom Perignon, an xmas gift from my friend nemo, it's

on the top shelf

Problems and changes:

1. ARGB, pretty pretty pain in the ass. 4 pieces of software........

2. The water loop was changed extensively as hardware came in and space limitations were discovered. The biggest change is that I originally planned to have one radiator on the front of the case, the tubes running over Jills head and to light the tubes as lighting for the bar, to do this the fan would have been in the case proper pushing the whole bar to far into the mobo, it didn't work, so the loop was moved to the top of the case and caused me to have one complex bent tube

Second, I had planned the loop to use one sideport on the distro, but space limitation moved both ports to the top causing the complex fittings setup in that corner.

3. The MOBO, sigh. This has been clearly the most challenging choice I made in this build, I really wanted it to work perfectly too, but I rolled those dice because: Aesthetic+function, the board I wanted (https://en.colorful.cn/en/home/product?mid=84&id=400d19bc-5655-49e1-b391-df00b60935ef) was to great a risk for the cost. This was a silver medal.

I generally dislike the design options I had in the Z790 series of the big board makers (I HATE big logos), especially the full ATX, there was one M that interested me, I should have picked it . This board has potential, but the BIOS is underdeveloped and compatibility has been problematic, I had to do a tricky outdated style BIOS update right from the box, and have had to reset the cmos a couple times. It skips BIOS on general boot and though stable, it will have to be addressed eventually, it doesn't have a proper sleep because of some issue between uefi & legacy. It may end up replaced, which will require a full build teardown.

the Turbo fan built into the board doesn't seem to function

Alos, the two argb connections on the mobo dont work, or I can't get them to recognize anything, necessitating the Coolermaster controller for the PSU and Distro. it is shoved behind the distro along with a Noctua 40mm

#va 11 hall a #va11ha11a #computer #pc #pcgamimg #sukeban #sukeban games #watercolor #watercooled #custompc #pc mods #jill stingray #fanart #cyberpunk art #futuristic #cyberpunk

174 notes · View notes

literaryvein-reblogs · 12 days

Text

Some Greek Art Vocabulary

for your next poem/story

Alabastron - A small vase for olive oil, often scented.

Amphora - A two-handled terracotta storage jar used by the ancient Greeks to hold or measure oil, wine, or milk.

Calyx - The external, cup-shaped, leafy part of a flower.

Calyx-krater - A krater with handles in the cupped shape of a calyx.

Epitaph - A funerary inscription.

Krater - A large pottery vessel with a mouth broad enough to allow a jug to be dipped into it; used for mixing wine with water in ancient Greece.

Negative space - The area around the decorative subject on a work of art; the external or outside area that defines the subject.

Palmette - An ornament of radiating petals on a calyx-shaped or budlike base; along with the sphinx, palmettes often top Greek grave markers.

Positive space - The area on a work of art where the subject is represented; the internal area.

Registers - In art, horizontal bands of images that often appear in vertical series on walls, vases, and so forth.

Relief - A sculpted surface in which the decorations stand out, in varying degrees of depth; reliefs are meant to be viewed frontally, not in the round.

Sphinx - A fabled creature that is half human and half animal; in Greek art and legend the sphinx has the head and torso of a woman.

Stele - An upright slab of stone usually inscribed and sometimes decorated with designs or figures that are painted or carved in relief; used by the Greeks as grave markers or for displaying public notices.

Symmetry - The duplication of an image on either side of a real or imaginary central axis.

Terracotta - Clay that has been fired at a relatively low temperature, brownish-red or buff in color.

Source

#greek art #terminology #word list #writing inspiration #writeblr #dark academia #writing reference #spilled ink #creative writing #light academia #literature #writers on tumblr #poets on tumblr #writing prompt #poetry #writing resources

113 notes · View notes

somediyprojects · 1 year

Text

DIY Paper Allium

Project by Kate Alarcón:

Alliums have always seemed a little bit magical to me. In a garden, the long, smooth stems blend in with the other greenery, and the big globes of tiny periwinkle flowers almost seem to float in mid-air. I imagine them growing in a fairytale garden, alongside foxgloves and moon flowers.

When I set out to design a paper version, I wanted to capture that enchanted, ethereal quality. I chose a very lightweight crepe for the petals, and constructed it so that each floret radiates out from a central ball on a long wire. This design gives each petal room to stand out from its little floret, uncompressed by the florets around it. I also scaled it up to be about the size of a large cantaloupe. The end result is a big, magical globe of delicate blue flowers that is almost a bouquet in its own right.

I wanted the flower to feel free-spirited, so I cut my petals freehand, which creates little variations between florets. Once you’ve cut several sets of petals, you’ll probably find that you don’t need the template anymore, either.

This allium isn’t especially difficult to make, but producing enough florets to complete the globe is a big undertaking. I suggest making them a few at a time over a couple of weeks while watching Netflix. You can insert them into the center ball as you go — it’s the safest place for them, and it’s motivating to watch your flower fill out.

If you run out of steam before finishing, don’t despair! My assistant Emma and I noticed that a partially covered flower looks a lot like a dandelion that’s been blown and wished on. And if that doesn’t do it for you, I’ve got just one of these guys up in my shop. —Kate

Photography by Desiree Swanson

Styling assistance by Emma Swanson

Supplies

allium templates here

Aleene’s Original Tacky Glue

fine crepe in “French Violet” from Rose Mille

heavy crepe in “Eggplant” and fine crepe in “Olive Green” from Castle in the Air

18 inch lengths of 18 and 20 gauge stem wire

paper scissors

wire snips

small awl

0ptional: millinery stamens that coordinate with your paper color (Rose Mille or 32° North for similar)

0ne 1.5” polystyrene ball (I buy mine at Michaels)

one 18″ length of vinyl tubing 3/8” outer diameter, ¼” inner diameter. (Home Depot and Lowe’s both carry it in the plumbing department)

A note about crepe paper grain:

The grain of the crepe paper runs parallel to the roll or fold. Crepe paper stretches horizontally, but not vertically, so you will almost always cut petals with the grain, placing the template so that the tiny wrinkles in the paper run up and down the template, not across. Cutting with the grain means that you cut in the same direction the crinkles are running; cutting across the grain means that you cut perpendicular to these crinkles.

For the stem:

Cut a 15” length of tubing at a very sharp angle. This pointy end will be the top of your stem, and you’ll insert the point into the polystyrene ball to help anchor the stem. Cut three of the 18 gauge wires so that they’re 16” long. Insert the wires into the length of tubing to hold your stem fairly straight while you wrap it.

Cut a long ¼” wide strip of the olive fine crepe across the grain. Dot glue at 1 cm intervals along the strip. Just below the top edge of your tubing, below the sharp angle you cut, begin wrapping the strip around the tubing, holding it at about a 45-degree angle to the tubing, so that it spirals down as you wrap. For a smooth finish, hold the paper taught and slightly stretch it as you wrap.

If you need to add strips, just glue the end of one strip in place, and begin wrapping the next strip about ½” above where the previous one ends.

For the flower center:

Using template A, cut a small oval from the purple heavy crepe. Dot one side of the oval with glue, and then place it on the polystyrene ball. Stretch the oval around the ball, and hold it in place a few seconds to allow the glue to set.

On the opposite end of the polystyrene ball from the center of the oval you just applied, pierce the ball with your awl. Use your awl to widen the top of this hole by holding it at a 45-degree angle to the surface of the ball and moving it all the way around the stem hole.

Cut one template B from the purple heavy crepe. Make sure the grain runs up and down the template. (The top edge should be zigzagged.)

Dot glue all over the purple crepe, including the points. Place the polystyrene ball about 2” from the bottom of the purple crepe piece. The points and the end of the ball covered by the purple oval should face up. Wrap the crepe around the ball, stretching it so that it molds to the ball.

Press and smooth the points down against the top of the ball. If there are any slight gaps between the smoothed down points, they will be camouflaged by your purple oval, and no white should show through.

Inserting the stem:

Pull the three 18 gauge wires out about four inches from the pointy end of the wrapped tubing. Insert these wires about 1” into the hole in your polystyrene ball. Slide the pointy end of your tubing up the wires, and pierce the hole with the pointy tip. You don’t need to insert the tubing very far; it just helps to have the tip anchored in the ball.

Gather the crepe “skirt” beneath the ball tightly around the stem and scrunch it to allow the glue to set around the stem. Dot a long ¼” strip of olive fine crepe with glue and cover this purple crepe skirt by wrapping the stem beneath the bottom of the covered polystyrene ball, until you meet up with the section of the stem already wrapped in olive crepe.

Floret center:

Snip your 20 gauge wire into 3.75” lengths. Cut a 1″ tall strip of the heavy purple crepe and stretch it all the way out as shown above. Cut this strip into sections that are wider than your template C. You can use the template C to cut this little fringe piece, or just freehand a similarly sized rectangle with three or four irregular points along the top edge. Dot glue along the bottom three quarters of this little piece. If you’re using double-headed millinery stamens, fold two of these stamens in half and place them on top of the jagged purple rectangle to make a little cluster of four stamens. Place the stamens on top of the little purple piece, so that the folded point on the stamens lies slightly below the middle of the rectangle. Place your short wire on top of the stamens, so that the tip of the wire lies slightly above the middle of the rectangle.

Wrap the rest of the rectangle loosely around your wire and scrunch the bottom to set the glue.

For the petals:

Cut a 2.25” x 3.75” rectangle of French violet fine crepe. The longer edge should run across the grain. Accordion or fan fold the strip (fold over, under, over, under) so that you have five layers of paper. Use the box around template D as a guide for how widely to space the folds (about ¾”). The fold lines should run with the grain and need to line up fairly precisely.

You should have a little folded packet of fine crepe about the size of the box around template D on the template sheet. Place template D on the packet, aligning the bottom of the template with the bottom edge of the packet.

The bottom right and left edges of the template D are marked with a dotted line that indicates that this section should not be cut, but rather aligned with the fold lines on your petal packet. Leaving this section intact on both sides will ensure that you have a continuous strip of petals.

In the photo, I’ve opened up my packet of petals to show what a continuous strip will look like, but you won’t actually open your packet yet. First, gently twist the bottom of the unopened petal packet. This will create evenly spaced crinkles that will make it easier to gather the bottom of the petal strip.

Untwist and open the petal packet. Make sure that each petal is facing the same direction and that none are twisted. Lay them side by side, very close together but not overlapping, across your forefinger, and then lay down your thmb to hold them in place. Pinch the width of the bottom of the petal strip to gather it. Dot glue on this pinched section and place your floret centers so that the top of the glue line is just above the bottom of the little piece of heavy crepe you wrapped around the tip of the wire.

Loosely wrap the gathered petal strip around the stamen wire. Adjust until the petals seem evenly spaced around the wire, and then scrunch the glued section of the strip around the stem.

Cut a ¼” wide by 4” long strip of purple heavy crepe across the grain, and dot it with glue. Beginning just under the petals, wrap the wire to about half an inch from the end of the wire, leaving a section exposed to help pierce the ball.

Push the petals back so that they lie perpendicular to the floret wire.

You’ll need between 80 and 100 florets depending on how densely you pack them into your allium.

Inserting the florets:

Beginning at the very top of the flower center, use your awl to pierce a hole in the covered polystyrene ball.

For extra security, you can dip the exposed wire on the end of your floret in glue before inserting it. (I usually don’t do this because it makes it hard to reposition the florets without tearing the paper covering the ball, but if your florets are falling out of the ball, then it’s probably worth it.)

Add a little circle of florets all around this first floret, spacing your holes about 1/8” apart. I don’t worry about being too precise with my hole spacing and just eyeball it, making sure that, overall, the florets look evenly distributed. Continue working downward, adding florets around the ball toward the stem.

The trickiest part of this project is adding the final florets around the base of the ball where you’ve inserted the stem, because you can’t push against the top of the flower to hold it in place while you insert the wires in the bottom. Instead, you can hold the stem firmly to anchor the ball while you insert the last florets up around the bottom of the ball.

#diy #crafts #paper #x

40 notes · View notes

xj9 · 4 months

Text

sapphic flag (gio edition)

tried posting these to my main but the site won’t let me. anyway I wanted to try designing something. here’s a sapphic flag, there's a few versions with simplified stripes (violet, turquoise, yellow, white)

a lot of flags use horizontal or vertical stripes but i wanted to make something with a little more movement and shape. each violet's silhouette/stripes/whatever you want to call it represents a woman's embrace. inspired a lot by the symbolism of the 2 violets on the 2015 flag.

feel free to use, credit my main blog @fluttershy!

more info below, like color + design symbolism.

things below are for the 1st flag (left), some of the meaning is lost for the simplified ones.

colors:

the turquoise color is inspired by the 8-color rainbow flag's "art and magic" turquoise stripe. violet represents the violet flower, womanhood, and femininity. yellow represents hope and happiness. white represents new beginnings and love/connection (community.) white is one of the centermost colors in reference to the trans flag. the yellow and white stripes beside each other also reference the nonbinary flag’s first two stripes. each color was picked from images of real violets and violas.

design:

a lot of violets fade to white at the center, so i thought it would be fun to include a gradient the flag's colors (violet/turquois/yellow/white) for the largest violet's silhouette. the transition of this gradient symbolizes the variations of feminine experience/identities culminating into love or a sense of community. this larger violet holds the smaller violet (violet/turquois/yellow, re:color meanings).

alternatively, if you read it as the flag's stripes are radiating out of the smallest flower shape, then it can be read as hope creating love (and more women)

#pride flags #pride flag #lgbtq community #lgbt pride #sapphic #nblw #wlw #pride #pride edit #bisexual #lesbian

3 notes · View notes

serpentide · 1 year

Text

𝐈𝐍 - 𝐃𝐄𝐏𝐓𝐇 𝐋𝐎𝐑𝐄. despite serpent's humane physique, her physiology and anatomy closely resemble that of snakes. aside from the most obvious attributes that can be easily seen ( such as her eyes and the scales scattered across various parts of her body ) , there are more differences between her and a normal human.

➤ 𝐬𝐜𝐚𝐥𝐞𝐬. serpent presents various scales 'pon her body, most notably across her shoulders and breastbone, down her spine, on her lower abdomen, upon her inner thighs and around her ankles stretching until the upper side of her feet. each scale possesses an aquamarine color and they're luminescent, which means that they reflect any outer source of light as well as glowing in the absence of the latter. in snakes, the scales offer protection from desiccation and injury, which is why even in serpent's case, they are located in the most vulnerable parts of her body. although she can be long since considered as an adult snake in natural terms, the outer layer of her scales sheds off and new scales grow beneath them ; this process does not happen too often due to her age. each scale is cold but smooth at the touch, in spite of the differing shape from one to the other.

➤ 𝐞𝐲𝐞𝐬. serpent has colorless hues, rimmed in a blood - red color, a memento of her life as a human, when she was affected by ocular albinism. now, her pupils are constantly elongated vertically, no matter the environment and thus the light that illuminates them. vertical pupils create an astigmatic depth of field such that images of vertical contours nearer or further than the distance to which the eye is focused are sharp, whereas images of horizontal contours at different distances are blurred. this type of vision allows serpent to estimate distances and blur elements that are outside of her focus and thus outside of her attention ; advantageous for predators, she is capable of always maintaining her surroundings under strict control. another ability that is unique to predators, is her ability to detect infrared radiation, which allows her to generate a thermal image of others in her surrounding area: the superimposition of thermal and visual images within her brain enables serpent to track a designated prey with great speed and precision. although this is not noticeable by others, beneath the eyelid, there is a special type of scale called 'spectacle' that further protects the eye from injury and dirt.

➤ 𝐦𝐨𝐮𝐭𝐡. although her mouth ( jaw + maw ) does appear normal on the outside, there are a series of openings alongside her upper and lower lips, called labial pits, that contain heat - sensing organs: these labial pits aid her in examining her surroundings and also serve to warn her of the presence of plausible predators or dangers nearby. her tongue is not forked like that of normal snakes, but it can still be employed to pick up minuscule scent particles in the air and place them in contact with the vomeronasal organ ; due to this and her capacity to smell normally through the nose, her sense of smell is quite heightened. when it comes to teeth, serpent has both snake teeth and snake fangs: her snake teeth, on the sides of her mouth where morals should be, are solid and angled backwards and they serve to heighten the power of her bite ; on the other hand, her snake fangs are positioned where her canines should be and they are hollow, attached to venom sacks and are thus used to poison her prey.

➤ 𝐯𝐞𝐧𝐨𝐦. serpent's venom is indeed lethal, although its effect on the body depends on the quantity of droplets that she injects within her prey. each of her fangs can contain a medium amount of 15 to 20 droplets, but only two droplets are actually needed to kill an adult human. due to the fact that she has never really depended on her own venom to kill her victims and has instead employed her python to devour her enemies, even serpent herself is uncertain about what her venom may be capable of causing once injected into a prey. for sure, she does know that her venom is highly neurotoxic and cardiotoxic and that a single droplet of it is enough to render an adult human incapable of standing on their own legs. when two or more droplets are injected within the victim, the death is slow but tremendously painful as it causes the collapse of the main organs and tarnishes the nervous system, before finally leading to death.

➤ 𝐛𝐨𝐝𝐲 𝐭𝐞𝐦𝐩𝐞𝐫𝐚𝐭𝐮𝐫𝐞. just like her animal counterpart, serpent is also a cold - blooded creature. although her heart is identical to that of normal humans ( which means that it has four chambers rather than three ) , her body temperature and her relationship with weather is indeed that of a normal snake. cold to the touch, she adores being close to sources of warmth and will thus always prefer to linger and rest in those spaces where the temperature is high enough to warm her body ; anything below 18° will make her feel painfully sick, restless and anxious, nauseous and will most likely compel her to enter a state of brumation, where her body falls asleep and her bodily function will slow until she is exposed once more to a source of warmth. a temperature any lower than that can lead to death. because of this, serpent can be tremendously picky when it comes to her abode nowadays, always making sure that both the temperature and the level of humidity within the rooms are proper enough for both her own health and that of her snakes.

➤ 𝐞𝐚𝐫𝐬. her ears are so much longer than those of humans and sharply pointed at the tip. as it is the case with her sense of smell, her sense of sound is also heightened by the ulterior presence of an internal ear, which is capable of detecting low frequency sounds ranging from 100 to 700 hertz. aside from this, her inner ear also allows her to detect motion, static position and sound waves traveling through the ground.

#• ⸺ ﹙ `♡´ ﹚ › study 02 : headcanon .#this hc stripped me of my sanity #omg i'm dead #i did so much research #BUT IT'S FINALLY DONE #AAAAAA #i really wanted to talk about her lil'monstrous attributes !!!#especially her venom and the fact that she cannot stand the cold #ehehehehe #i'm satisfied ( for now )#if more things come to mind #i will add them later !!!

14 notes · View notes

crowdsourcedgender · 2 years

Note

I saw your post on genderclick and it might be me?- but is there a version of that for sexuality (im personally speaking about general sexualities, not acespec or arospec specific) when your sexuality is fluid but seems to really only change suddenly sometimes or all the time with something to cause the change?

[Image ID: The abroclick pride flag. The first image has a white, dial symbol. Both are 12 sections, radiating from the center of the flag. The vertical and horizontal sections are dark grey, while the rest (from top bottom left then up and around) are mint green, light mint green, pinkish-red, light pinkish-red (color-picked from the abrosexual flag), yellow, light yellow, blue, pale blue. /End ID]

Name: Abroclick (Feel free to call it whatever)

Source: @ieatadoptmepets

Abroclick is a sexuality similar to genderclick where your sexuality changes suddenly and abruptly, without a smooth or slow change.

The pride flag incorporates the abrosexual flag colors as well as the design of genderclick. I used a different type of dial to distinguish them!

The asker said for them the change is caused, but that doesn't have to be the case if you want to use this term! It can also apply to types of attraction, although if you'd prefer a flag with different colors/specific name, send me an ask.

p.s. check out my pinned post for more info about my blog!

#mogai coining #suggest a label #mogai #mogai term #gender coining #lgbtq #lgbtqia #lgbtqplus #microlabels #mogai gender #abroclick #genderclick #abrosexual #aceflux #aroflux

19 notes · View notes

cosmichighpriestess · 1 year

Text

-The Laws Of Karma- New Rules For Ascending Humanity-

✝️Archangel Michael Channeling ✝️

Beloved masters, many of you are experiencing the cutting edge of creative existence as you rapidly move through the remaining distortions of your old reality into a more clearly defined life and viewpoint. However, your emotional and mental awareness are still at odds and battling with the dichotomy of old and new thought forms and beliefs that are swirling around you. Symbolically, in one hand you are holding your justly earned higher vibrational awareness and wisdom as you test and validate your newly expanded senses. You are beginning to become accustomed to the many small and large miraculous manifestations that are occurring in your everyday life.

Yet, on the other hand, you are still endeavoring to juggle the swirling mass of distorted thought forms prevalent in the common mass consciousness belief system of humanity. The Earth and humanity are deep in the throes of the remaining vestiges of the old Third- / Fourth-Dimensional reality. Thereby, perpetuating fear, lack, separation, and the deep-seated need to control and dominate others. It is truly a cosmic dance you are in the midst of, and what we are endeavoring to do is help you find the harmonic cadence and beat which will allow you to waltz, glide and surf on the crests of the New Age waves of change; as well as modify the troughs or lows in-between.

Have we not told you many times before: ‘This great drama all of humanity is now experiencing is not about Light or dark; good or evil; negative or positive; right or wrong, for there are many shades, interpretations and levels of truth within each of these concepts.’ What you are seeking is the middle or balanced Path. This entails bringing all the Facets of your Being: the physical, emotional, mental and etheric bodies back into harmony once more so that they are resonating compatibly, and they complement and strengthen each other.

First, you accomplish this in what could be seen as a horizontal fashion, whereby, you reintegrate all the energetic Facets of yourself you have created within your Etheric Body and Auric Field. You focus within on each chakra-mind center, and through your enlightened intent, you gradually reprogram each of these centers, thereby replacing old dis-empowering vibrations with new refined Memory Seed Atoms of Creator-consciousness. As you do so, the refined energy from each center radiates outward redefining and harmonizing the attributes and qualities that pertain to each particular energy center. As we have taught before; as you harmonize these energy centers, one-by-one, you activate and reconnect the seven seals of higher consciousness, which ignites the Etheric Pillar of Light or Rod of Power that runs through your physical vessel, along your spinal column. As a result, you gain access to the more rarified vertical levels of consciousness known as your Higher Self and Super-conscious Mind. By doing so, this speeds up the process of returning your “Out of Balance Cross of matter” to its “designed Spectrum of Light and Shadow” or the “Middle Path of duality and polarity.

Those of you who are deep in the midst of this transformational process at this time are experiencing many conflicting patterns of thought; however, you are learning to be an observer of the process and view your everyday drama of life from the higher vantage point of a master. You are experiencing fewer and less dramatic lows, and you are processing these more quickly, so that you may move back into your center of power. However, it is also a critical time of testing your ability to claim what is to be your highest truth, and to maintain your balance as the waves of change ebb and flow.

As you become accustomed to observing your world from a loftier viewpoint, you will be able to sense the energetic probable future time lines, which those around you are creating with their positive or negative thought forms and actions. You will intuitively see what is ahead of them if they continue on their present course – possibly not the particular details but the uplifting or stressful results of their actions. Just as we cannot interfere or resolve your problems for you, you should not try to intercede for those around you. What you can do is not get caught up in their negative dramas. You can serve best by being an unwavering example and staying firmly in the power of your heart center; each and every moment, no matter what occurs in the world around you.

The Universal Laws of Cause and Effect, known as Karma, have always been an inherent rule of Creation, whereby all “cocreators within the material planes of consciousness” must experience what they create. The fall into the density of miscreation, whereby your auric field and bodily form were gradually permeated with the negative vibrations of fear, guilt, shame, feelings of unworthiness, and self-doubt resulted in the formation of a great Karmic Board and the mighty Wheel of Karma.

Too often those who are struggling with the early stages of Self-mastery find that they cannot stand the pressure of the dramatic changes taking place within their personal world, and so they shift back into the frequency patterns which are comfortable. Even though they are dissatisfied and unhappy with their current personal reality, it is familiar territory and they are not ready to move beyond the strong bonds of the mass consciousness belief patterns. These fragments of self that each of you have created are very strong-willed, and for many dear Souls it is a difficult struggle to gain control of the lower self.

With the assistance of your personal Fifth-Dimensional Council of Light, before you incarnated into each lifetime, you chose the specific, negative vibrational patterns from past lives that you wished to “transform into balance and harmony.” Each of you were placed in a particular Holographic, energetic environment with specific frequency patterns, which would be most advantageous in assisting you to learn the life’s lessons you chose to rectify. In addition, you were given special talents, gifts and strong inclinations to assist you in fulfilling your life’s mission.

The exact situations you would experience were not planned. However, it was planned for you to be exposed to situations that would give you the greatest opportunity to “heal and harmonize the imbalanced frequencies within your physical, mental, emotional and etheric bodies.” Each Soul incarnates into the ancestral family lineage and the frequency pattern hologram that will create the “picture of reality” for your greatest opportunity: EACH SOUL MUST AGREE TO THE CHOSEN PLAN.

The awakening of Self from an unconscious state of Being is one of the most dramatic steps in the evolutionary process of humankind. In order to become Self-conscious, you must become aware of what is happening in your personal world. You must sharpen your thinking process and learn to live in the moment, or the NOW moment. In order to gain experience and wisdom, you must think about what you want to remember, and what you wish to retain in your memory bank. The unconscious-of-Self person drifts randomly through life, usually not thinking of what the consequences of his or her actions will be; therefore, they are seemingly tossed about by the whims of fate. As you shift from self-judgment to Self-love, it will create a resonance that extends beyond the physical body and it will begin to affect others. When it grows forceful enough, it can even assist in the healing process for those within your sphere of influence.

One of the changes in the Universal Laws for the New Age is that humanity has been given a Divine Dispensation ─ which no longer requires that you balance or harmonize a major portion of the negative vibrational patterns you have created before you can ascend into the entry level of the Fifth Dimension − ONLY 51%. When you have done so, you move into a gradually progressive STATE OF GRACE. Thereafter, you are assisted in moving through the remaining 49% very quickly, as you gain the wisdom of your experiences instead of wading through the lessons of cause and effect situations. Now it is important that you understand, you are being offered the gift of releasing all past life karma and any karmic debts from this lifetime as well. However, you are still responsible for the thoughts, actions and deeds that you initiate now and in the future.

My brave ones, how bright and warm is your Sacred Fire? Does it blaze brightly and warm the hearts of others? Or is it a feeble flame, not even strong enough to warm your own heart? “Cold-hearted” is not a term associated with a true bearer of God light.

Remember, you always have a choice: you may journey through the shadow lands with those who helped create them or you may walk with delight in the radiance of the Light of Spirit. We are always near to assist you; however, you must traverse the Path of Freedom under your own Will/Power and Wisdom. You are loved most profoundly. I AM ARCHANGEL MICHAEL

#messages #archangel michael #channeling #ronna vezane

8 notes · View notes

bathroomforless · 9 months

Text

Indulge in luxury and warmth with our Curved Designer Heated Towel Rails collection at Bathroom4Less. Crafted for efficiency, these heated towel warmers are available in various sizes and finishes, allowing you to customize your space with both comfort and elegance. Upgrade your bathroom with our stylish and practical heated towel rails, exclusively at Bathroom4Less. Buy straight heated towel rails, horizontal or Vertical designer radiators, and, more, from Bathroom4less.

#Curved Designer Heated Towel Rails #Bathroom4less #heated towel warmers #heated towel rails #Buy straight heated towel rails #horizontal or Vertical designer radiators

0 notes

rabbitcruiser · 1 year

Photo

National Windmill Day

Drive out to windmill country, or read up about the history of windmills and how they can provide clean, sustainable energy by harnessing Earth’s natural power.

Most people love them because there’s something absolutely bucolic about their squat structures and the gentle creak of their fins as these wooden structures spin in the natural wind currents. Of course, that describes the old fashioned kind of windmill. The newer, modern versions take on some different characteristics, of course.

Windmills have been around for a very long time, since the time when people first realized it was possible to harness the power of the wind to perform work and provide energy. Ever since new innovations have been made with the ability to utilize the never-ending source of power that windmills capture.

National Windmill Day commemorates the origins of the windmill as well as how it has helped to shape technology and industry from the past and into the future. It’s time to learn about and celebrate National Windmill Day!

History of National Windmill Day

The idea of capturing the power of the wind to perform work isn’t new and, in fact, it goes back far further into history than most people would suspect. Since then, its use has sprung up in multiple cultures throughout the world.

Heron of Alexandria, who lived in the first century AD, was the earliest person known to have harnessed the energy of moving air to perform work, using a very primitive device to power, of all things, a musical instrument: the organ. The people of Persia also developed more traditional windmills, though they had a different orientation than the ones most people typically think of when hearing the word ‘windmill’.

Some historians think that the Persian models were the inspiration for the vertical models that were developed later on in the middle ages. The evidence of one of the oldest windmills that remains today can be found in Weedley, Yorkshire, England and is said to have been built in 1185. As is commonly depicted in media, these machines were used primarily to grind grain, and have been for many centuries since that time.

Recently though, at least in the last 150 years or so, there’s been a growing movement to use windmills in another fashion entirely. The power of the wind can be harnessed to turn giant wind turbines which in turn generate clean, and virtually unlimited, renewable energy.

Windmills have been around for a long long time, and while they may seem like primitive tech, they’ve moved into the world as hope for a clean future. Along with solar, bio-fuel, and fuel cells, windmills are working to save the environment.

National Windmill Day Timeline

644 AD First reference to windmills

Beginning as horizontal mills with woven reed blades that radiate from a vertical axis, these first windmills are built in Persia.

11th Century AD Windmills are used for food production

In the Middle East, windmills are used to help produce food and the ideas are then taken to Europe by merchants and crusaders.

1300s Windmills are used to drain water

The Dutch people of the Netherlands realize that the water from their low-lying areas can be drained using windmills.

1600s Windmills are introduced to the New World

When the Dutch colonize New Amsterdam (now called New York City), they bring their windmill designs with them

1887 First large scale power generating wind turbine

Charles F. Brush builds a huge 60-foot windmill with a whopping 144 blades in Cleveland, Ohio.

How to Celebrate National Windmill Day

Learn More About Windmills

Well perhaps to first thing to do is start by reading up on the topic of windmills. One of the best things that can be done to celebrate the day is to get more educated on the history of windmills, to begin learning how they’re helping us today, and even to share that information with others. As one of the fastest growing sources of energy in the world, it’s worth learning more about!

Here are some interesting facts about windmills:

The first modern version of the wind turbine was built in Vermont, USA in the 1940s. Its success was not long lived due to war shortages and the next time a windmill would rival it in size would be in 1979.

Hawaii, USA hosts the world’s largest wind turbine, which is the height of a 20 story building and its blades are the length of a football field.

Offshore wind is particularly effective. In Europe, one offshore wind turbine (located in the water) can power more than 1500 homes.

Read Don Quixote

Famous (or perhaps, infamous) for his mistake in thinking that windmills are giant monsters, Don Quixote bravely rides toward them to do battle and, of course, eventually gets knocked off his horse. This is just one of the many beloved and memorable scenes in this classic novel by Spanish author, Miquel de Cervantes, published in 1606.

Visit Holland for National Windmill Day

While not necessarily the first place to house windmills, Holland (now known as The Netherlands) has a long history with them as they were the first place to use them to move water from low lying lands. In fact, the second Saturday and Sunday in May (because one day just isn’t enough!) are celebrated in Holland as “National Mill Day”, which is called Molendag in Dutch. This is a day when 950 windmills and watermills will open their doors to the public for visitors to see their inner workings first hand and learn more about them. Plus, many of them will also host fun events for the local community and tourists alike.

Whether in Amsterdam or throughout the rest of this country filled with canals and waterways, the windmills are stunning. It’s even possible to go on a bike tour of the mills to visit some of the most beautiful, iconic and picturesque mills in the world!

Those who find other countries in Europe to be more accessible can celebrate National Windmill Day in the United Kingdom, Germany, Switzerland and other countries, where it is often referred to as National Mills Day.

Watch Some Windmills

For those who happen to live in an area that has a single windmill or a whole windmill farm, it might be fun and interesting to go out and watch them turn, turn, turn… (Are we the only one hearing that song now?) More and more communities are dotting them about the landscape as a sustainable source of power. As you gaze upon and contemplate just how important these are to a bright, pollution-free future for our children, enjoy watching their soothing motion and consider their history too.

National Windmill Day FAQs

How do windmills work?

Wind turbines use their large blades to collect kinetic energy as the wind flows over the blades to create “lift”.

Do windmills make noise?

Windmills do emit a characteristic noise, mainly generated by the movement of the blades, but the noise is generally weak.

Are windmills renewable energy?

Wind is an emissions-free source of energy that has fewer effects on the environment than many other energy sources.

Do windmills create electricity?

Yes! Wind turns the propellers of the windmill around a rotor that, in turn, spins a generator to create electricity.

How much do windmills cost?

The standard windmill costs around $2-4 million with another $40-50,000 in per year in operation and maintenance.

Source

4 notes · View notes

sunfiber · 7 days

Text

HDPE Spiral Tank Manufacturer

Sunfiber is a Manufacturer of HDPE Spiral Tank in Ahmedabad, Gujarat, India. Our Registered Office and Manufacturing Unit is in Ahmedabad, Gujarat, India. An HDPE spiral tank is a type of storage tank made from High-Density Polyethylene (HDPE) using a spiral-winding construction method. Available types of Tanks are Vertical Closed Tank, Horizontal Closed Tank, Tanker, Conical Bottom Tank, Conical Top Tank, Open Top Tank, and Underground Storage Tank. Features: Spiral Winding Technology: Provides a seamless and leak-proof construction, enhancing the tank’s strength and durability. High-Density Polyethylene Material: Ensures resistance to chemicals, corrosion, and UV radiation, extending the lifespan of the tank. Customizable Sizes and Capacities: Available in a range of sizes to meet various storage needs, from small-scale applications to large industrial demands. Temperature Resistance: Withstands extreme temperatures, making it suitable for both hot and cold storage requirements.Easy Installation: Lightweight and designed for straightforward installation, reducing labor and transportation costs Applications: Chemical & Process Fertilizers Textile Processing Petrochemicals Pulp & Paper Industries Pharmaceuticals Salt & Marine Food & Beverages Steel Industries Sunfiber is a Manufacturer of HDPE Spiral Tank in Ahmedabad, Gujarat, India and Supplier in Karnataka including locations Bangalore, Mysore, Hubballi-Dharwad, Kalaburagi, Mangalore, Belagavi, Davanagere, Bellary, Vijayapura, Shimoga, Tumkur, Raichur, Bidar, Udupi, Hospet, Gadag-Betageri, Robertsonpet, Hassan, Bhadravati, Chitradurga, Kolar, Mandya, Chikmagalur, Gangavati, Bagalkot, Ranebennuru, Arsikere. Feel free to contact us for more information and inquiries. View Product: Click Here Read the full article

0 notes

radiiatoroutlet · 12 days

Text

Radiator Outlet

Radiator Outlet, the home of affordable radiators online! Transform your home today with our cheap radiators, you won’t find cheaper online than Radiator Outlet!

Specialists in Designer Radiators, Bathroom Towel Radiators and More….

Radiator Outlet, the home of affordable radiators online!

If you are browsing the web for designer radiators then Radiator Outlet can help, we have a wide of cheap radiators which are manufactured to the highest standards and are sure to modernise your home, workplace or even retail shop. We have vertical radiators and horizontal radiators in a wide range of styles which will transform the appearance of your home and provide an unrivalled heat output over the cold winter months.

Over the last few years, the popularity of modern radiators and contemporary radiators has increased considerably, here at Radiator Outlet we ensure we have the latest styles available and our designer radiators are for sale at the best prices!

Transform your home today with our cheap radiators, you won’t find cheaper online than Radiator Outlet!

The cost of designer radiators can be extremely expensive if you are not looking in the correct places, at Radiator outlet we browse the market daily to ensure our prices are the lowest available. Although our prices are unbeatable we don’t compromise in quality, in fact we provide many large hotel chains with radiators throughout the UK and have done so for a number of years, furthermore; all our radiators come with a 10 year warranty and 30 day money back hassle free returns policy.

On our website you will find:

Designer Radiators

Vertical Radiators

Horizontal Radiators

Bathroom Radiators

Modern Radiators

Heated Towel Rails

Bathroom Towel Radiators

Tall Radiators

Radiator Valves

And more!

Can’t find what you are looking for? No problem, please contact us and our experienced staff will provide you with knowledgeable advice on a suitable radiator. Whether it be tall radiators, vertical radiators, horizontal radiators or just radiator valves; you can find everything required for a stylish heating system here at Radiator Outlet!

radiators

Radiator Outlet https://www.radiatoroutlet.co.uk/ Addresses: Radiator Outlet, Units 23 & 24, Common Bank Industrial Estate, Ackhurst Road, Chorley, Lancashire. PR7 1NH Phone; 0845 860 5908

Facebook

Instagram

1 note · View note

rdopticalelectronics · 18 days

Text

Exploring Advanced Optics: Circular Polarized Glasses, Solar Eclipse Glasses, and Linear Polarized G

In the realm of optics, specialized glasses play a crucial role in enhancing visual experiences and protecting our eyes. RD Optical offers a diverse range of advanced eyewear, including Circular Polarized Glasses, Solar Eclipse Glasses, and Linear Polarized Glasses. Each type of eyewear is designed to address specific needs, whether for recreational use, solar observation, or everyday protection. In this article, we delve into the unique features and benefits of these specialized glasses and how they can enhance your vision.

1. Circular Polarized Glasses: Enhanced Visual Clarity and Comfort

Circular polarized glasses are renowned for their ability to reduce glare and improve visual comfort. These glasses utilize circular polarization to filter out reflected light that can cause eye strain and discomfort.

Features and Benefits:

Glare Reduction: By blocking horizontal and vertical light waves, circular polarized glasses minimize glare from surfaces like water, roads, and snow, providing a clearer and more comfortable viewing experience.

Improved Contrast: The polarization technology enhances contrast and color saturation, making it easier to see details and reduce visual fatigue.

Versatile Use: Ideal for outdoor activities such as driving, fishing, and skiing, circular polarized glasses offer superior protection and visual clarity in bright conditions.

RD Optical’s circular polarized glasses combine cutting-edge technology with stylish designs, ensuring that users enjoy both functional benefits and aesthetic appeal.

2. Solar Eclipse Glasses: Safe Viewing of Solar Phenomena

Solar eclipse glasses are essential for safely viewing solar eclipses and other solar events. These glasses are equipped with special filters that protect your eyes from harmful solar radiation.

Features and Benefits:

Eye Protection: Solar eclipse glasses are designed to block out harmful UV and infrared radiation, preventing damage to the eyes during direct solar observation.

High Optical Density: The special filters used in these glasses reduce the intensity of sunlight, making it safe to look directly at the sun during an eclipse.

Enhanced Viewing Experience: With solar eclipse glasses, you can experience the breathtaking phenomena of solar eclipses without compromising your eye health.

RD Optical provides high-quality solar eclipse glasses that meet international safety standards, ensuring that you can enjoy solar events with peace of mind.

3. Linear Polarized Glasses: Precision and Clarity in Everyday Use

Linear polarized glasses use linear polarization technology to reduce glare and enhance visual clarity. These glasses are particularly useful for various everyday activities where glare reduction is beneficial.

Features and Benefits:

Glare Reduction: Similar to circular polarized glasses, linear polarized glasses block polarized light to reduce glare, improving visibility and reducing eye strain.

Enhanced Comfort: By filtering out reflected light, these glasses provide greater comfort during extended use, whether you’re working, reading, or engaging in outdoor activities.

Affordable Solution: Linear polarized glasses offer a cost-effective option for glare reduction without compromising on quality or performance.

RD Optical’s linear polarized glasses are designed to deliver exceptional performance and comfort, making them a practical choice for daily use.

4. Why Choose RD Optical?

RD Optical is dedicated to providing high-quality optical products that cater to a variety of needs. Here’s why their glasses stand out:

Advanced Technology: RD Optical employs state-of-the-art technology in their eyewear, ensuring superior performance and protection.

Quality Craftsmanship: Each pair of glasses is crafted with precision and care, using durable materials that guarantee long-lasting use.

Comprehensive Range: RD Optical offers a wide selection of specialized glasses to meet different visual and protective needs.

Customer Satisfaction: The company prioritizes customer satisfaction by delivering products that combine functionality with style.

5. Conclusion

Whether you’re looking to enhance your outdoor experiences, safely observe solar events, or simply reduce everyday glare, RD Optical’s range of specialized glasses—Circular Polarized Glasses, Solar Eclipse Glasses, and Linear Polarized Glasses—offers a solution tailored to your needs. With their commitment to quality and innovation, RD Optical ensures that you receive the best in optical technology.

For more information on these advanced eyewear solutions and to explore their full range of products, visit RD Optical.

#solar eclipse glasses #circular polarized glasses #linear polarized glass #3d fireworks glasses #red cyan glass

0 notes