#its progressing its progressing

[monoisbored]

necessary wip post to show that im still alive

[anne-is-confused]

only you.

[clumsypuppy]

wait for me

[aerofbreath]

Actually writing something based off of this post. Y'all really seemed to like it and I got scared LOLOL

(How it will probably go (written poorly written cause it's almost 7AM and I haven't slept yet) . Also I have no idea what I'm doing. This will be rewritten better in a fic maybe.)

Jason sighed as he made his way into Gotham University's gym. It was the middle of the day and Jason was there at a Startup Event posing as a guy who was interested in what people had to offer. He had only had maybe a total of four hours of sleep since he had patrol the night before. Granted, this wouldn't have affected him as much if he was more mentally prepared to be awake. The only reason why he's out here was because Bruce had woken him up an hour ago to tell him a little last minute about what he needed to do today. Originally, the plan was to do absolutely nothing. But now he has to investigate a guy that Bruce had his eye on as of lately.

The person he's looking for is a man named Danny Nightingale. Apparently he's been in Gotham for a couple years and only recently started making a mess of things. How it went under Bruce's nose is beyond him considering how freaked out Bruce was once he did find out.

Apparently, the guy has been making life changing machines. Little mechanical bees have been flying around Gotham really just sucking up all the pollution in the air and just depositing it somewhere. According to the media, they go back to some headquarters and into a bee hive looking structure to deposit all the pollution and sludge. From the photos shown, it's actually pretty impressive. Some guy actually making a change around here.

For Bruce- no. For Batman, this is just highly suspicious. Why would some guy make these positive life changing machines? For the better? No. No genius with the power to change the world would do it for the better. There's got to be some ulterior motive behind it.

At least, that's what Batman thinks.

Jason thinks it's all interesting. Maybe there is an ulterior motive but even then, at a scale so large that it's literally affecting the city in a positive way? You've got to be literally more insane than the Joker if you wanted to plaster your face everywhere at an event like this. Everyone else at this event seemed to show promise but compared to Danny Nightingale's company? They're literally all small fry.

Surprisingly enough, however, no one else seems to be at Danny's booth. Not even Danny. Jason frowned as he approached the booth and just looked at the machines on them. The Bees are kind of just flying in place and the moment that Jason even looked at them, the Bees immediately got to work. They flew around him like a puppy with wings, nuzzling against him and bumping into him so dumbly. And honestly?

It was actually kind of cute. You would think that being on such little hours of sleep and being grumpy the whole morning would really affect the pits inside him but no. He's surprisingly calm.

"Oh my gosh, I am so sorry! They don't usually act like this," a voice stuttered out. A man hastily walked towards Jason as he gently plucked the Bees out of the air and brought it close to him.

"Uh, don't worry about it. I thought it was kind of..." Jason trailed out before locking eyes with the man who spoke.

This was Danny Nightingale. He was much shorter than Jason, only standing tall at 5' 5". His hair was fully black with only a white money piece right on his bangs. And his eyes? An alluring blue with only a hint of green at the center of his eyes. Honestly, the sight of Danny just about took Jason's breath away.

There was a subtle glow to him, almost making Jason think of there being some sort of meta activity going on but looking around the people in the area, no one but him seems to notice. Danny was concerned about Jason, that much is obvious. The way his eyes burrowed in concern then into confusion. It's strange why just looking at him made Jason's heart skip a beat, even though in hindsight, Danny looks much worse off than Jason.

That man looks like he hasn't slept in 3 weeks. But even then he was...

"Cute..." Jason finally finished his sentence a little too late.

Danny blinked in confusion, tilting his head to the side. His bangs fall freely over his eyes. Just the sight of that almost made Jason blush. "My bees were cute?" Danny spoke, the tone of his voice (very tired) sounded like a sweet harmony in Jason's ears. "Oh! You're interested in Nightech? No one else seems to be interested in my stuff yet. I can tell you all about this company and how it works? I put in a lot of work and love into these little guys and I'm sure you would love them too!"

Blah blah blah. Proper name. Place name. Backstory stuff.

Nothing of what Danny is saying is registering in Jason's brain right now. Maybe some. ("I... Love... You...")

"I love you too!!" Jason blurted out.

Danny blinked before widening his eyes. "Wh-What...?" There was that look of concern again but now there's another look. Recognition...

Whatever. None of that right now. This is embarrassing!

"I-I said I love your company. Uh. Do you have a business card? I can let Bruce Wayne know about this."

Wordlessly, Danny gave an information card to Jason before that poor brick of a man just ran out of there, not once even looking back. Honestly, from the way it's playing out in Jason's head right now, he feels like a princess running away from her prince at the stroke of midnight. The earpiece crackled before a voice started to speak.

"Jason? What the hell was that?" Bruce's voice questioned.

It was only when Jason left the gymnasium that he answered, "Me digging my own grave for the second time, old man. Let me go die in peace."

"No, no," Dick's voice chimed in, "Only after we replay that very short conversation about 50,000 times. Thank you very much."

Jason only groaned in response.

Danny, back in the gymnasium, only stared at the door that Jason left from in horror. The only way for people to react that way to him like that is for them to be dead or liminal. Now he has to figure out a way to tell Bruce Wayne that this person that he seems to know is a little bit dead!

This actually is a part of whatever the fuck I'm writing. I'm still thinking of a fic name. But all of the random posts go together in some way.

[chiangyorange]

chain faces pt2

forest whimsy (here!!)

w stands for wrangler (here !!)

[nekogunz]

Maybe next year,

[hydrossity-zone]

brotherly shenanigans

[celestial-sphere-press]

Book Decoration: AKA All The Ways I Don't Use a Cricut

(this post is for people who don't want to buy an expensive cutting tool, or for those that do have an expensive cutting tool that would like to mix things up a little)

1. Print That Shit

If you're already printing your own textblocks, an easy step for titles is to print them. Above is a title printed onto an "obi" of decorative paper. I measured out where I wanted things on the finished book and laid it out in Affinity, then printed it on a full sheet & trimmed it down to wrap around the book. A more simple method is to print & glue on the label into a slight indent in the cover (to protect it). A third option is to do the spine in bookcloth, while you print on paper for the cover and then glue that paper onto the boards (this usually looks even better when it is a three-piece bradel bind).

2. Foil Quill / Heat Pens

The heat pen is one of my go-to tools, but it can be a bit touchy about materials. The most popular version is the We R Memory Keepers' Foil Quill (which is one of the most ergonomic), but other pens exist that can get you to a higher heat temp, finer lines, or more consistent foil. For example, I have a pen created by a local Japanese bookbinding studio that fares way better on leathers than the WRMK quill & with a finer tip, but it's hell to control. Best results in general are on paper or smooth bookcloth (starched linen, arrestox, colibri - even duo will work but its less solid). The fuzzier a bookcloth is, the less your foil quill wants to deal with it. This means the heat n bond method of making bookcloth does not play nice with a heat pen usually, but there are two solutions: 1) use this tutorial on paste + acrylic medium coated bookcloth instead that will get you a perfect surface for the heat pen, or 2) use the pen on paper & then glue onto the cloth. I did a video tutorial for both foil quill use and this type of homemade bookcloth for @renegadeguild Binderary in 2023.

You get the most consistent results by tracing through a printed template that is taped in place, as I do in the video above.

3. Paint That Shit

Acrylic paints will do you fine! The above is free-handed with a circle template, because I wanted that vibe. If you need straight lines that won't seep, lay them down with tape first & then paint over it first with a clear Acrylic medium, then your color. Same goes for stencils. Two more examples of painted bookcloth:

4. IT'S GOT LAYERS

By using layers of thinner boards, you can create interesting depths & contrasts on your cover. You can also make cutouts that peep through to the decorative paper behind. The most important part to this technique is the order in which each edge is wrapped. To get a good wrapped inside edge, you will split the turn in into tabs to get them to conform to a curve. You can also layer multiple colors of bookcloth without multiple layers of board, as seen below left, so long as you mind your cut edges for fraying.

5. Inlaid... anything

Mirrors! Marbled paper! I saw someone do a pretty metal bookmark once! The key is creating a little home for it to live in, which is pretty similar to the above layering method. On one layer you cut the shape, & glue that layer onto the bottom solid board before covering. You can do the top layer as an entire 1 mm board (like I did for the mirrors) or a sheet of cardstock, like I would use for inlaid paper.

6. Decorative Paper

Decorative paper is always helpful & adds to the paper hoard... & its effects can be layers with other techniques, as below. Marbles, chiyogami, momi, or prints & maps of all kinds can be great additions. Some papers may need a protective coating (such as wax or a sealer).

7. Stamps (with optional linocut)

While I've not used many more regular rubber stamps, I do know some who have, successfully! And I've used one once or twice with embossing powder (see photo 3 up, the gold anchor on the little pamphlet bind). What also works is to carve your own linocut or stamp, & then use block printing ink to ink it onto your fabric (as i did above). A bit time intensive, but it was nice how easily reproducible it was, and I liked the effect I got for this particular bind.

These methods are not exhaustive, just ones I've used, and there are of course many others. I haven't gone too into detail on any of these for the sake of length (& post photo limits) but feel free to ask about more specifics. Usually I'm using them in combination with other options.

[fishbloc]

gave myself a mandated break from working on the shop 24/7 by drawing desertduo in chiikawa land so i can make them into stickers for myself

they're stealing bigb's cookie car in the second image

[anyonghalimaw]

many members of falastin's family have been martyred, and the rest of them now live in a makeshift tent made of plastic and fabric scraps. falastin's elderly mother cannot find medicine. there is a baby in the family. help save them by contributing to falastin's gofundme here

6,348/2,000,000 SEK

622/196,063 USD

tagging for reach. please dm me if you do not wish to be tagged in the future

@timetravellingkitty @deathlonging @briarhips @dirhwangdaseul @mahoushojoe

@rhubarbspring @schoolhater @pcktknife @transmutationisms @sawasawako

@feluka @terroristiraqiss @irhabiya @commissions4aid-international @wellwaterhysteria

@deepspaceboytoy @post-brahminism @khanger @kibumkim @neechees

@mangocheesecakes @kyra45 @marnota @7bitter @tortiefrancis

@toiletpotato @fromjannah @omegaversereloaded @vague-humanoid @evillesbianvillain

@aristotels @komsomolka @xinakwans @heritageposts

@ot3 @amygdalae @ankle-beez @lonniemachin @dykesbat

@watermotif @stuckinapril @mavigator @lacecap @yugiohz

@socalgal @chilewithcarnage @ghelgheli @sayruq @northgazaupdates2

@vakarians-babe @papenathys @slicedblackolives @heliopixels @nimbooz

@hiveswap @irhabiya @feluka @anneemay

@tumkaafiho @fleshdyk3 @balaclava-trismegistus @paper-mario-wiki @lesbianmaxevans

@ripley-stark @paandaan @itsfookingloosah @rooh-afza

@shesnake @akajustmerry @himejoshikaeya @foamingatthemeowth @retvolution

[vacueye]

looking through old tf2 stuff again + felt like reuploading some of my favorite (mostly spy) art throughout the years

[ivankov-save-me]

HEY, JUST BY THE WAY I WAS CORRECTLY GENDERED IN PUBLIC FOR THE FIRST TIME YESTERDAY IF ANYONE CARES.

[anbaisai]

It's not even actually their birthday

(Based on a conversation I had with a friend + Jamil's 2024 birthday present to the player)

[heph]

House MD - Season 1

[oooocleo]

more bugfae character design! these characters were created together w @forever-halone !

patreon

[hichter-art]

"Dont talk to me or my emo sons ever again" (Work in progress)

In honor of getting to see a dc and sonic crossover, I am being greedy and begging for Sega to do another one with tmnt, PLEASE

It´s just a wip but I thought I might just post it anyway^^

As always, critique and advice are very much appreciated, don’t be shy!