#dont know how to call this but

[teeto-peteto]

honestly i really wished for Sentinels Of Light event to be rewritten on a better way without character flanderization and misconception and self awareness of the lore. Being completely honest: it was terrible.

My point specifically is: According to Riot, Ruined King happened by the end of year 996, and Sentinels Of Light happened on the late 997. Theres only one year difference between events. But still, they messed up very poorly.

In Ruined King, Pyke trusts Sarah Fortune, even if she's a captain. And it doesnt take thaat much time for him to do so, i will talk about Pyke trust issues in another post if i have time. Curiously enough, neither of them are present on the Ruined King finale, having both of them a separate post credit scene, but its understandable at this point that Sarah doesnt fear Pyke or at least, shes not worried about what might happend to her, and that Pyke is now targeting Viego or the entities of the Shadow Isles.

In Sentinels Of Light, everything said just flops. Pyke and Sarah were written completely DISREGARDING the fact that they know each other. If they didnt make the event with very poor writing, this could be easily exploitable. Listen, Pyke's trauma makes him target captains, but decides to dismiss Sarah after everything that happened along Ruined King. Imagine how they could have written the Bilgewater chapter on Sentinels Of Light, on wich Sarah finally does fall under Viego's ruination because of her obsession with Gangplank, and tries to kill the team and also Pyke. Imagine how it could be to write how Pyke revives his trauma AGAIN because he was betrayed again by someone he again put his blind trust on. This could be also be a good way to portray how Sarah's trauma also perpetuates after Ruined King when Gangplank escapes, having to start all over again. The moment where Pyke gets rid of Sarah would have been a peak, and he would totally have a reason to become a sentinel of light, instead of the 'hehee funny character he would look cool if he were good'.

The description of Sentinel Pyke skin is the cherry on the top of this mess, where it depicts that Pyke is currently under Nagakabouros influence, hence why he is completely stupid and doesnt hear voices nor kill people... no, im pretty sure it doesnt work that way. Pyke voices were removed by Nagakabouros with Illaoi's help in Ruined King, yes, but during the whole game hes pretty lucid, hes able to kill without trouble, it just looks like Riot teams dont talk to each other.

As a side point, i have a smaaall theory or headcanon that Ruined King Pyke is relatively young or at least 'fresh' being the Bloodharbor ripper, as Sarah does know him as she is a captain, but Illaoi doesnt, and that whole scene is written like 'Oh apparently all these dead bodies have a cause'. I dont know, its very difficult to order the whole lore and theory of it when they dont even know /shrug

[just-french-me-up]

'ao3 needs a like and dislike button'

what you need, my algorithm-rotten minded friend, is a grip

[stil-lindigo]

Bisan is calling for another global strike!

I saw some posts just outlining Jan 21st, and wanted to clarify that Bisan has called for a full seven days of action.

What a global strike would look like is:

calling in sick to work

purchasing bare essentials ahead of the week so you can observe the general boycott of goods / buying as little as you genuinely can

putting in a concerted effort to elevate Palestinian voices and make it clear that this strike is in support of a permanent ceasefire!

For those who will have to purchase necessary goods during this time, please observe the brands that the BDS movement is asking us to boycott!

♢♢♢

Right now is also a good time to mention some better uses for your money during this week.

Available e-sims in Gaza are running low!!

Mirna El Helbawi and her team are working round the clock to continue to connect Palestinians as Israel does its best to cut them off from the rest of the world.

You can learn how to purchase and send e-sims here, and below you’ll find a list of what is currently needed (the areas in brackets indicate what region you should select to buy e-sims in).

--

CareforGaza is an organisation that does verifiably good work, distributing supplies directly to Palestinian families.

They have a Gofundme set up at the moment, but because of Gofundme’s poor track record regarding refusing to transfer funds to Palestinians, I’d recommend continuing to donate directly to their PayPal here.

Good luck to all of you. Don't turn away from Palestine!

[im-not-great-with-names]

Another sketch for God of Shadows by @ladygreenfrisbee

Because I got inspired by a series of photos my friend sent me but also, a ‘what if Wukong managed to catch Macaque’ or ‘what if Macaque didn’t immediately melt into the shadows’ kind of thing… idk

Tried natural light for this one, I dunno which version I like better

Also I like to imagine Chang’e gradually changing Macaque into more and more feminine hanfus just because

[aysrin]

Needle Felt Siffrin Build Log: (oct 6 - nov 20, 2024)

Credits goes wholely to @insertdisc5 for creating ISAT and siffrin's design! I am just here to attempt to make cool fanart (and get more people to play isat.. my devious plans are going great so far :3) As always, this isn't a tutorial- it is just a log about how i go about approaching a sculpture and I hope this collection of resources can help others make their own sifs!!

PSA: this has some spoilers for endgame CGs/sprites on my references image board ( also might see it in the backgrounds of my process pics). And bc this is needle felting, you will see some sharp needles! beware!

my inspiration was the intro cutscene where Sif eats the star, so my main goal was to adhere to the style of ISAT as closely as possible while transfering it to 3D space. And I knew i also wanted to try making the cloak for stopmotion purposes, so my process was tailored towards having control over the fabric with wire inlaid within the cloak (more on that later).

I ended up not sticking eyebrows on top of siffrin's bangs lol but anyways, first order of business is Gather Reference! v important. pureref is free and an awesome program. I also do some sketches to visualize the pose and important details i wanted to include in the sculpt.

behold the isat wiki gallery page! tawnysoup wrote an awesome ISAT style guide that absolutely rings true in 3d space too!! adrienne made a sif hair guide here!! (sorry i couldnt find the original link, but it's on the wiki). It says ref komaeda hair so that's what i looked at, along with other adjacent hairstyles! I also like doing drawovers on in progress photos to previs shapes n stuff to get a better idea of the end result.

Also if you're like me and struggle with translating stuff into 3D space, take a look at how people make 3d models and figurines! sketchfab is also a great resource! I looked at the link botw model by Christoph Schoch here for hair ref. (I used Maya, but there's a blender version too ! you can pose characters too if your model has been rigged!)

Face:

Started off blocking out the main shapes of eyelids and iris, and then filling in the colour details in the iris and the star highlights before moving onto adding thin black outlines and eyelashes. I didn't take many in-progress photos cause i kept ripping stuff out to redo them many many times, sorry!! This eye took about 3 hrs bc i just wasn't happy with it!! Sometimes it do be the vibe to give up, go to bed and see how it looks in the morning (more often than naught, it looks fine and it was the "dont trust yourself after 9pm" speaking)

The Mouth:

Couldn't decide if i even wanted to add a mouth as per usual with all my humanoid sculptures.. but i did some drawover tests first to see what expression i liked and to try to visualize it from multiple angles. (I was also testing the placement of stars on the hat brim here)

And then I redid the mouth like 3 times cause the angle just wasn't right (this went on for about the course of a week yay!)

Hair: woe baldfrin be upon ye

I made the hair strands individually first, and then since Sif has some of the hair at the back dyed black, i covered some of the tips with black wool (manually) (I think it would go much faster if i just took a marker to it, but hahaha i love pain and detailing!! )

And then the rest of it was positioning strands with sewing pins layer by layer, always looking at it from different multiple angles- sometimes tailoring the angle or swoop of individual hair flippies. At one point I thought the back looked too cluttered, but the hat covers a lot of it anyways!! yay for hiding mistakes! (imo this is a similar process to how cosplayers style wigs, but on a smaller scale and the same level of time consuming)

As always, look to your reference for guides, and I always do a whole bunch of drawovers over in progress photos to ascertain what was working and what wasn't.

Hat:

A trick to get a super pointy tip, make another tip seperately while keeping the connection point unfelted, and then combine the two to make super pointy hat!! (this also helps if you made the hat too short and need it to be taller. ask me how i know)

The embroidery on the hat brim was done in a hoop and then invisible stitched to the felted top portion. Technically you don't need a hoop but it helps keep the fabric tension, so you avoid puckers in your embroidery. You can also use iron-on stabilizer if your fabric is loose weave or particularly thin. this is the tutorial i used for the stars embroidery! particularly the fly stitch one, french knots, and the criss-cross stitches. highly recommend needlenthread for embroidery stitches and techniques! i learned all my embroidery from this single site alone.

For fabric, I think I used a polycotton i had in my stash,, unsure of the actual fiber content bc i bought it a long time ago. I used DMC Satin floss which was nice and subtle shiny but frayed a lot so it was kind of a pain to stitch with... but keep a short thread length and perservere through it!! After the embroidery was done, I folded up the raw edges and invisible sewed it to the top portion of the hat.

General shape:

Ok general structure of the body is this: wire armature body covered with black wool -> cloak lining & wire cage -> edge of lining is invisibly sewn to the main cloak at the hem -> head

Don't be afraid to mess around with the pattern, it's essentially a pizza with a slice taken out of it to form a steep cone shape!! Use draft paper before cutting into felt to save material! (i think i made like 3 cloaks before i was happy with the shape lol).

You can also hide the seam of the cloak and collars by gently messing up the fibers of the felt with your fingers or a felting needle btw! you can also sandpaper the seams according to Sarah Spaceman in this vid (highly recommend them for their in depth cosplay/crafting builds holy smokes), though since sif cloak is at such a smol scale, I just blended the seam with my felting needle.

For the lining wire cage section, I sewed in wire around the cloak, so the main rotation point is at the top neck area under the collar. These paddles are used to keep whatever pose I need the cloak to be in for stopmotion purposes. Then after the wire is done, I invisibly sewed the lining to the cloak at the hem (same technique as the hat brim to the lining there).

In hindsight, I should've used a thinner fabric for the lining, but i only had sheer white in my stash so had to go with double felt, thus resulting in a really bulky lining but oh well!

Heels:

started with the general boot shape, then tacking on the diamond shape heel stack and also diamond shape sole bc we're committed to the bit here. I skewer the boot onto the armature which also conveniently hides the connection point into the base to keep the whole thing upright and also I can rotate the boot to tweak the angle if needed.

Pins:

I kinda just trial and error'd jewellery wire with pliers into the pin shapes. They're itty bitty!! had a whole bunch of fails before i got two nice ones. A hot tip is to use needle nose pliers and wrap the wire around the tip to get a smooth circle shape!

Base:

I smoothed out the edge of a circular wood base with a dremel, and then used wood stainer to get the black colour. It ended up kinda looking like I took a sharpie to it, but whatever.... now i have a whole ass can of black wood stainer........ I then made a rough mountain of black wool and stuck the feet armature in. And now he's standing!!

Normally at this point when I'm done felting everything, to get a smooth finish, I'd take a small pair of scissors and carefully snip away any flyaway fibers, but this time, I just left them fluffy cause i think that's what sif would do :3c

Photoshoot:

Normally I do shoots using daylight but it was winter so the sun was nonexistent. So I broke out the home lighting setup aka dollarstore posterboard for a nice smooth background, and then hit it with the overhead Fill, side Fill 2, and Rim light, and use white paper/posterboard for bounce light if one side feels too dark. But if things are overexposed, you can move the light sources away until the harshness dims down. I'm using a Olympus mirrorless camera (handed down to me by my sibling so i dont remember the model exactly), which can connect to my phone as a remote so I can avoid shaking the camera when i take photos. Pretty nifty for stopmotion purposes! (yes my camera stand is a stack of notebooks, a tissuebox and some eva foam under the lens, don't judge me)

Stopmotion animation:

I'm still figuring stopmo out on my part, but my process was straight ahead animation ... move the cloak a cm, take a pic.... move another cm, click.... and repeat until i get a version I was happy with. My ref was the cloak animation from Gris (beautiful game btw). The 2d star animation was also done straight ahead using procreate, exported in png with a transparent background, and finally stitched together with the stopmotion footage in photoshop.

My turnarounds are also stopmotion! also secret hack, the turntable is a fidget spinner sticky tacked to a cake platter.

And i think that's all! i mainly wanted to share how I go about thinking about taking a 2d concept and moving it to 3D. I also didn't go in depth into how to actually do the needle felting bc I don't think I''d be very helpful I'm a very good teacher by telling yall to just keep stabbing until it looks right (i'm self taught for this hobby),,, if anyone wants it though, i can share a bunch of tutorials and other felters' process that helped me learn more needle felting!

Hopefully this was helpful to someone! Feel free to send asks if ya got any questions or if anything needs clarification! Or show me your works! I love seeing other people's crafts :3

here have a cookie for making it this far 🥐

[reds-skull]

Soap "dog-coded" MacTavish my beloved

(This took 5 weeks help)

[cod-dump]

*waiting on evac*

Price: so... do you have any hobbies? Other than terrorism

Makarov, tied to a car bumper: I write poetry

Price: Of course you fucking do

[lucabyte]

Yeah, that about sums it up.

[girlwiththegreenhat]

team fortress 2 finally getting rid of the bots after 5 years

work on the team fortress 2 comic continuing after 7+ years

half life 3 development looking more likely than ever with legitimate code, file, and voicework leaks referencing a new non-VR single-player game from valve featuring a HEV suit wearing protagonist and Xen creatures and concepts

shoutout to the valve fan that found the genie lamp. you a real one

[bluesunflowerz]

So thats terror of the autons basically, right?

[just-null]

I’d like to think that the hantengu clone’s darling would actively try to avoid anything with the colors red,yellow,green,or blue to “not send the wrong message” to the other clones

Them: "Choose whatever color you want. You deserve to have all of them <3"

Also them: "Why that color specifically..........."

[clumsypuppy]

horrible truth bomb dropped on my head 20 min ago

[methoughtsphantom]

Jason “my family doesn’t know im alive” Todd and Danny “my family doesn’t know I’m dead” Fenton going alongside each of their plans my beloved. like Danny will absolutely go head-to-head with all of Gotham to support his new best friend on all his crime lord endeavors while he drags Jason to also attend collage with him. They are roommates and there never seems to a mention of family from either side. It’s an unspoken understanding they have. They met because Crime alley as a ghost lair thrummed with so much loneliness, it was at first the perfect place for Danny to hide his ecto signature in. But then he saw the dumbass whose lair it was lean his motorcycle just a tad too much when making a sharp turn to an alley, he sweeped the floor through a lifted chain link that passed his body but not his helmet. Yep that’s right the red thing got stuck. Danny who at the moment happened to be watching through his window snorted. Much to his horror because if not a ghost that dude could’ve gotten his head flung off.

Still, the scene was ridiculous.

On a whim he irrationally sees the police closing in on the guy and panicked at the thought of the guy using intangibility to free himself so Danny phased them both through his apartment wall and left the guy sprawled in his couch. Jason didn’t freak out but that’s normal when one’s got a concussion, one the guy immediately denied having as Danny laid out the medical supplies. The idiot proceeded to almost flatten four steps to the door with his stubbornness. He also said “I’m asexual” in the most deadpan voice as Danny dropped him back in the couch.

Danny sighed. Clearly though, he’d done so too early in the night because the guy kept trying to go, kept trying to knock Danny out, kept trying to slash him with knifes Danny didn’t know he had stashed. He’d only disarmed the guy from his guns. The visible ones apparently, cause at one point the guy did take out a gun and shoot until the ammo ran out and then teetered the thing like it was an art prop and hit his moon lamp.

Danny "yeah you aren’t officially my friend until you’ve tried to kill me" fenton my guys.

Anyways both keep having the same argument over if Danny technically kidnapped Jason or not. Danny holds the fact that the police at least didn’t see the guy make the ridicule. Jason argued that happened cause he was sporting a concussion. Danny argued he got that after.

Jason at first thinks the guy's a meta, but no. Danny introduces himself, sheepily now that he recognizes this is who the lair he invaded is from. He bandages him and tries to cook for him. If Danny didn’t have ice powers he most certainly would’ve burned the apartment. Jason then proceeds to kick him out of his own kitchen and make them both enchiladas. It’s the most normal both had in a while with another person and the air seems oddly settled. From then on, Jason constantly invited himself over, under the pretense that this was his territory and therefore he could drop in unannounced. Danny who has actual powers says he only allows this because Jason cooks very well.

Danny stays away from the crime fighting business unless his buddy is in deep shit he can’t get himself out. Also it’s Danny’s turn to cover for his vigilante friend which Sam and Tucker give him so much shit for. (but also advice)

And they were roommates. (omg) Danny effectively derails Jason’s big comeback plans by casually dropping ghost lore every two days. Like,

Jason, talking about how he doesn’t want Bats snooping on his territory:

Danny: Just don’t let them in

Jason: ??

Danny: yeah!! Hasn’t Batman died and got revived??? You can totally kick out death touched people you don’t want entering on your lair.

Jason: …I can?

Danny: Yep dude, your lair’s supposed to feel safe.

Jason: wait does that mean I can kick you out?

Danny: First this is my apartment. Second, im dead, not dead touched. Third, it’s too late to get rid of me. bitch.

Anyways Jason is super excited. You mean to tell him he can actually deny people over to his territory haunt?? (Yes it’s only to people who have died and came back but still!! The sample size is exactly the type of people he doesn’t want to see—!)

Joker my beloathed can’t step foot in Crime Alley.

(Jason’d feel a lot safer if the clown was dead but the possibility of his murderer turning into a ghost and their little loophole not applying on the clown is too scary to contemplate.)

Anyways, Jason loves experimenting with the power. It can go from simply making people shudder and not want to enter crime Alley to straight up not letting them enter like there’s an invisible wall blocking the way.

Jason because he’s hurt that Bruce never even patrols Crime Alley and also because he’s petty put B under the category of “invisible wall” blacklist. His reasoning is that the man doesn’t even attempt to enter Crime Alley. To him it’s surely just a place shadowed in tragedy. (anyways that’s it’s the place he met Jason)

Ironically, Jason totally forgets that Batman does venture into Crime Alley one day in the whole year. The day he met Jason.

Okay. He didn’t forget at first. The first year Jason remembers cause it was only a few months till then but then the next— Jason forgets that today’s the anniversary of the day’s Bruce’s parents died. He forgets to allow B in when he feels a slight tug and dismiss the feeling that prompts Bruce to investigate because he literally can’t enter Crime Alley. He starts the trialsTM, he scouts on the very edge and sees people the whole day enter and get out and cross with no problem but Bruce can’t.

It’s literally just Bruce.

Time to call Constantine, i guess.

[one-chaotic-neautral]

Arcane ships ranked, for fun

The main ships and some rarepairs I've found, I like pretty much everything in the first 4 rows. I probably missed some but idk what they are and I'm too lazy to add more rn.

feel free to add your thoughts or ships but again its just for funsies :)

[araneapeixes]

in the bathroom at the gay clubbbb

[marciaillust]

bro fuck it im workposting. i did illustrations, i storyboarded, i directed. I did many cool things in 2024 and millions of people all over the world saw em. that has to count for something